summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ppc4xx: QUAD100HD: Allow the environment to be put into flash.Gary Jennejohn2008-05-14-4/+9
| | | | | | | After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also use a redundant environment. Signed-off-by: Gary Jennejohn <garyj@denx.de>
* ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based boardGary Jennejohn2008-05-08-0/+681
| | | | | Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Kilauea: Fix incorrect FPGA FIFO addressStefan Roese2008-05-08-1/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boardsStefan Roese2008-05-08-10/+52
| | | | | | | | | This patch adds fdt (flattened device tree) support to all remaining AMCC eval boards. Most newer boards already support device tree. With this patch, all AMCC boards now enable device tree passing from U-Boot to Linux arch/powerpc kernels. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add weak default ft_board_setup() routineStefan Roese2008-05-08-3/+23
| | | | | | | | This patch adds a default ft_board_setup() routine to the 4xx fdt code. This routine is defined as weak and can be overwritten by a board specific one if needed. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: acadia: Add fdt support and fix section overlap problemStefan Roese2008-05-08-7/+16
| | | | | | | | | | | | | This patch adds fdt (flattened device tree) support to the AMCC Acadia eval board. This increases the image size and it doesn't fit anymore into 256kByte. Since we didn't want to remove features from the configuration, we decided to increase the U-Boot image size (add one flash sector). Also changed the default environment definition to make it independent of such changes. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add device tree support to AMCC YosemiteIra Snyder2008-05-08-0/+32
| | | | | | | | | Add support for booting with a device tree blob. This is needed to boot ARCH=powerpc kernels. Also add support for setting the eth0 mac address via the ethaddr variable. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix typos in 460GT/EX FBDV arrayDave Mitchell2008-05-08-1/+1
| | | | | | | Corrected two typos in the 460GT/EX FBDV array. Signed-off-by: Dave Mitchell <dmitchell@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-05-05-3/+6
|\
| * Allow building mips versions with ELDK 3.1.1Vlad Lungu2008-05-05-3/+6
| | | | | | | | | | | | .gpword works only with local symbols on certain binutils versions Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
* | MAKEALL: add inka4x0 boardWolfgang Denk2008-05-05-0/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | kb9202 board: fix build problem.Wolfgang Denk2008-05-04-1/+4
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Prepare for v1.3.3-rc3Wolfgang Denk2008-05-04-2/+413
| | | | | | | | | | | | Update ChNAGELOG, minor white space cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of /home/wd/git/u-boot/master/Wolfgang Denk2008-05-04-28/+68
|\ \ | |/
| * drivers/net/tsec.c: Fix typo.Wolfgang Denk2008-05-04-1/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * version_autogenerated.h: use printf rather than echo -nMike Frysinger2008-05-04-5/+3
| | | | | | | | | | | | | | | | Some systems are dumb and do not implement the -n flag to echo (like OS X). Convert the Makefile to use printf as this should work everywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wolfgang Denk <wd@denx.de>
| * fix building when saveenv is disabled in some setupsMike Frysinger2008-05-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | If you enable environment in the flash, but disable the embedded option, and you disable the saveenv command, then the #if nested logic will trigger a compile failure: env_flash.c: In function 'env_relocate_spec': env_flash.c:399: error: 'flash_addr' undeclared (first use in this function) The fix is to add CMD_SAVEENV ifdef protection like everywhere else. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * SBC8548: fix address mask to allow 64M flashJeremy McNicoll2008-05-04-3/+3
| | | | | | | | | | | | | | | | Fix incorrect mask to enable all 64MB of onboard flash. Previously U-Boot incorrectly mapped only 8MB of flash, this patch correctly maps all the available flash. Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
| * qemu_mips: add READMEJean-Christophe PLAGNIOL-VILLARD2008-05-04-0/+18
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk2008-05-04-1/+17
| |\
| | * [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version pickerShinya Kuribayashi2008-05-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current trick to pick up GNU assembler minor version uses a dot(.) as a delimiter, and take the second field to obtain minor version number. But as can be expected, this doesn't work with a version string which has dots more than needs. Here's an example: $ mips-linux-gnu-as --version | grep 'GNU assembler' GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2 2-129) 2 $ This patch restricts the version format to 2.XX.XX... This will work in most cases. $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' 2.18.50.20080215 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2 18 $ Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
| | * [MIPS] cpu/mips/cache.S: Add dcache_enableShinya Kuribayashi2008-05-03-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482, "allow ports to override bootelf behavior") requires ports to have this function. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | Fix misspelled commentMarcel Ziswiler2008-05-04-1/+1
| | | | | | | | | | | | Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
| * | mkimage: make mmap() checks consistentMike Frysinger2008-05-03-13/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mmap() related code is full of inconsistent casts/constants when it comes to error checking, and may break when building on some systems (like ones that do not implicitly define the caddr_t type). Let's just avoid the whole mess by writing the code nice and clean in the first place. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Fix defined but not used build warningMarcel Ziswiler2008-05-03-1/+0
| | | | | | | | | | | | | | | | | | - warning: 'srom' defined but not used Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
| * | Fix implicit declaration build warningsMarcel Ziswiler2008-05-03-0/+2
| | | | | | | | | | | | | | | | | | - warning: implicit declaration of function ‘serial_initialize’ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
| * | TSEC: add config options for VSC8601 RGMII PHYAndre Schwarz2008-05-03-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Vitesse VSC8601 RGMII PHY has internal delay for both Rx and Tx clock lines. They are configured using 2 bits in extended register 0x17. Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: Andy Fleming <afleming@freescale.com> Acked-by: Ben Warren <biggerbadderben@gmail.com> -- drivers/net/tsec.c | 6 ++++++ drivers/net/tsec.h | 3 +++ 2 files changed, 9 insertions(+), 0 deletions(-)
* | | Revert "ColdFire: Get information from the correct GCC"Wolfgang Denk2008-05-03-6/+6
| | | | | | | | | | | | | | | This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
* | | config.mk: use correct (cross) compilerWolfgang Denk2008-05-03-21/+25
|/ / | | | | | | | | | | | | | | | | | | | | Some config.mk files reference $(CC) to test for specific tool chain features, so make sure $(CC) gets set before including any such config files. This patch replaces commit b7166e05a5 ("ColdFire: Get information from the correct GCC"). Signed-off-by: Wolfgang Denk <wd@denx.de>
* | pxa: fix previous definition on cpu initJean-Christophe PLAGNIOL-VILLARD2008-05-03-5/+1
| | | | | | | | | | | | | | | | | | | | start.S:183:1: warning: "ICMR" redefined In file included from start.S:33: include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition start.S:187:1: warning: "RCSR" redefined ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | pxa: fix pcmcia operation on 'i' may be undefinedJean-Christophe PLAGNIOL-VILLARD2008-05-03-3/+5
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* | MPC8610HPCD: Drop -O2 from the build flagsKumar Gala2008-05-03-1/+1
| | | | | | | | | | | | Make the flags use -Os like all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-05-03-7/+12
|\ \
| * | ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM moduleStefan Roese2008-04-30-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the Canyonlands/Glacier fixed DDR2 controller setup used for NAND booting to match the values needed for the new 512MB DIMM modules shipped with the productions boards: Crucial: CT6464AC667.8FB Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.cStefan Roese2008-04-30-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a problem with DIMMs that have 8 banks. Now the MCIF0_MBxCF register will be setup correctly for this setup too. This was noticed with the 512MB DIMM on Canyonlands/Glacier. Signed-off-by: Stefan Roese <sr@denx.de>
* | | RTC: Fix month offset by one problem in M41T62 RTC driverStefan Roese2008-05-03-2/+2
| |/ |/| | | | | | | | | | | | | | | | | This patch fixes a problem with the month being read and written incorrectly (offset by one). This only gets visible by also using the Linux driver (rtc-m41t80). Tested on AMCC Canyonlands. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-05-01-4/+4
|\ \
| * | onenand: rename 16 bit memory copy into memcpy_16() to avoid conflictsWolfgang Denk2008-05-01-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Onenand needs a version of memcpy() which performs 16 bit accesses only; make sure the name does not conflict with the standard function. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-04-30-21/+59
|\ \ \ | |/ /
| * | cmd_nand: fix warning: str2long ncompatible pointer typeJean-Christophe PLAGNIOL-VILLARD2008-04-30-1/+1
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | Fix calculation of I2C clock for some 86xx chipsTimur Tabi2008-04-30-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Signed-off-by: Timur Tabi <timur@freescale.com>
| * | ColdFire: Fix ethernet hang issue for mcf547x_8xTsiChung Liew2008-04-30-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | The ethernet hang is caused by receiving buffer in DRAM is not yet ready due to access cycles require longer time in DRAM. Relocate DMA buffer descriptors from DRAM to internal SRAM. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * | ColdFire: Fix compilation issue caused by new changes in fsl_i2c.cTsiChung Liew2008-04-30-0/+4
| | | | | | | | | | | | | | | Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com> Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * | ColdFire: Get information from the correct GCCTsiChung Liew2008-04-30-6/+6
| | | | | | | | | | | | | | | Signed-off-by: Kurt Mahan <kmahan@freescale.com> Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * | Fix warning in env_nand.c if compiled for DaVinci Schmoogiedirk.behme@googlemail.com2008-04-30-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix warnings nv_nand.c: In function 'saveenv': env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type env_nand.c: In function 'env_relocate_spec': env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type if compiled for davinci_schmoogie_config. Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Ack by: Sergey Kubushyn <ksi@koi8.net>
| * | Fix warnings while compiling net/net.c for MPC8610HPCD boardAnatolij Gustschin2008-04-30-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS causing overriding default -Os option. New gcc (ver. 4.2.2) produces warnings while compiling net/net.c file with -O2 option. The patch is an attempt to fix this. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | lwmon5: fix offset error in sysmon0 POSTSascha Laue2008-04-30-4/+4
| | | | | | | | | | | | | | | Signed-off-by: Sascha Laue <sascha.laue@liebherr.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | lwmon5: fix manual merge error in POSTSascha Laue2008-04-30-2/+2
| | | | | | | | | | | | Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
* | | cmd_nand.c: fix another 'incompatible pointer type' warning.Wolfgang Denk2008-04-30-1/+1
|/ / | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Makefile: fix parallel buildsWolfgang Denk2008-04-30-4/+10
|/ | | | | | | | | | | | | | | | | | | | | This problem shows up with parallel builds only; it results in somewhat cryptic error messages like $ JOBS=-j6 MAKEALL netstar Configuring for netstar board... arm-linux-ld: cannot find -lgeneric make[1]: *** [eeprom.srec] Error 1 A few boards (like netstar and voiceblue) need some libraries for building; however, the board Makefile does not contain any such dependencies which may cause problems with parallel builds. Adding such dependencies is difficult as we would also have to provide build rules, which already exist in the respective library Makefiles. To solve this, we make sure that all libraries get built before the board code. Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.1 at 2024-12-24 12:14:43 +0000