summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Improve configuration of FPGA subsystemMatthias Fuchs2008-01-09-62/+69
| | | | | | | | | | | | | This patch removes the FPGA subsystem configuration through the CONFIG_FPGA bitmask configuration option. See README for the new options: CONFIG_FPGA, CONFIG_FPGA_<vendor>, CONFIG_FPGA_<family> Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* Add Epson RX8025 RTC supportMatthias Fuchs2008-01-09-0/+228
| | | | Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* serial: Make default_serial_console() a weak functionMatthias Fuchs2008-01-09-1/+3
| | | | | | | | | With this patch it is possible to reimplement default_serial_console() in board specific code. This will be done in the upcomming PMC440 U-Boot port. This also allows the lwmon board maintainer to remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* add 'terminal program' functionalityHarald Welte2008-01-09-0/+104
| | | | | | | | | | This patch adds a 'cu' like serial terminal command to u-boot using which you can access other serial ports from the system console. OpenMoko uses this in their Neo1973 phones to get access to the GSM Modem and GPS chip from the bootloader. Signed-off-by: Harald Welte <laforge@openmoko.org>
* Re-introduce the 'nand read.oob' and 'nand write.oob' commandsHarald Welte2008-01-09-0/+8
| | | | | | that used to exist with the legacy NAND code Signed-off-by: Harald Welte <laforge@openmoko.org>
* Fix building with CRAMFS but not JFFS2 supportHarald Welte2008-01-09-1/+10
| | | | Signed-off-by: Harald Welte <laforge@openmoko.org>
* Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the ↵Jean-Christophe PLAGNIOL-VILLARD2008-01-09-2/+24
| | | | | | | sametime Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* ARM: support board-specific ethernet PHY initJean-Christophe PLAGNIOL-VILLARD2008-01-09-0/+4
| | | | | | Add until the new phylib will be arrived Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46xJean-Christophe PLAGNIOL-VILLARD2008-01-09-14/+10
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Add missing file in gitignore and commentsJean-Christophe PLAGNIOL-VILLARD2008-01-09-2/+31
| | | | | | based on Linux source tree's .gitignore files Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Coding Style cleanup, update CHANGELOGWolfgang Denk2008-01-09-139/+2682
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk2008-01-09-7/+2058
|\
| * Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2008-01-07-7967/+34307
| |\
| * | Remove warnings re CONFIG_EXTRA_ENV_SETTINGSPeter Pearse2007-11-15-11/+11
| | | | | | | | | | | | Remove warnings re onenand_read() & write()
| * | Correction patchPeter Pearse2007-11-15-358/+239
| | |
| * | Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-11-15-1/+1
| |\ \
| * | | Add apollon board supportPeter Pearse2007-11-09-5/+2175
| | | | | | | | | | | | | | | | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | | | Merge branch 'master' of git://www.denx.de/git/u-boot-fdtWolfgang Denk2008-01-09-50/+380
|\ \ \ \
| * | | | LIBFDT: use memmove() instead of memcpy()Gerald Van Baren2008-01-08-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is partial patch from the DTC/libfdt commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647 Author: David Gibson <david@gibson.dropbear.id.au> Date: Wed Nov 21 11:56:14 2007 +1100 The patch also fixes one genuine bug caught by valgrind - _packblocks() in fdt_rw.c was using memcpy() where it should have been using memmove(). Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
| * | | | libfdt: Add more documentation (patch the seventh)David Gibson2008-01-08-0/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds more documenting comments to libfdt.h. Specifically, these document the read/write functions (not including fdt_open_into() and fdt_pack(), for now). Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
| * | | | libfdt: Add more documentation (patch the sixth)David Gibson2008-01-08-0/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds some more documenting comments to libfdt.h. Specifically this documents all the write-in-place functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
| * | | | Fine grained per property /chosen updating.Gerald Van Baren2008-01-08-33/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement a suggestion by Scott Wood to make the /chosen handling fine grained. Don't overwrite pre-existing properties on a per-property basis, so if /chosen exists but a necessary /chosen/property doesn't, it gets created. If a /chosen property exists, it is NOT overwritten unless the "force" flag is true. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
| * | | | Improve the FDT help message.Gerald Van Baren2008-01-08-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a note that "fdt copy" makes the new address active. Remove most of the extra hints at the end of the fdt help. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
| * | | | Support setting FDT properties with optional values.Gerald Van Baren2008-01-08-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a bug found and documented by Bartlomiej Sieka where the optional value on "fdt set <path> <prop> [<val>]" wasn't optional. => fdt mknode / testnode => fdt print /testnode testnode { }; => fdt set /testnode testprop => fdt print /testnode testnode { testprop; }; Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
| * | | | Add fdt_find_and_setprop() to fdt_support.hMatthias Fuchs2008-01-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fdt_find_and_setprop() is used by several 4xx boards and it's missing in the appropriate header. This patch eliminates a warning when building U-Boot for such boards. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Acked-by: Stefan Roese <sr@denx.de>
* | | | | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xxWolfgang Denk2008-01-09-1067/+1953
|\ \ \ \ \
| * | | | | mpc83xx: fix missed pci_hose -> hose conversion for new libfdt codeKim Phillips2008-01-08-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | mpc83xx: rm remaining FLAT_TREE codeKim Phillips2008-01-08-109/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ..in board pci.c files Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | mpc83xx: remove FLAT_TREE codeKim Phillips2008-01-08-104/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | need to rm it from pci code, too! Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | mpc83xx: convert to using do_fixup_*()Kim Phillips2008-01-08-615/+265
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | convert to using simpler mpc85xx style fdt update code; streamline by eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm the old school FLAT_TREE code from 83xx (since the sbc8349 was just converted over to using libfdt). Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | sbc8349: enable libfdt by default on WRS SBC8349 board.Paul Gortmaker2008-01-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make libfdt the default for the WRS SBC8349 board. Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef done for the other 83xx based boards. Also fix a typo in CONFIG_PCI. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| * | | | | sbc8349: migrate board to libfdtPaul Gortmaker2008-01-08-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds libfdt support code for the Wind River sbc8349 board. Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for the other Freescale 83xx boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| * | | | | sbc8349: Remove board specific ECC codePaul Gortmaker2008-01-08-327/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ECC code is now shared for all 83xx boards, so remove board specific one. See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| * | | | | mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)Kim Phillips2008-01-08-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | Add support CONFIG_UEC_ETH3 in MPC83xxJoakim Tjernlund2008-01-08-1/+141
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
| * | | | | Remove CONFIG options related to OF that we dont useKumar Gala2008-01-08-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8360E MDS config defined: CONFIG_OF_HAS_BD_T CONFIG_OF_HAS_UBOOT_ENV Which we don't use or ever needed. This seems like copy-paste feature creep. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | | | mpc83xx: supress compiler warningKim Phillips2008-01-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mpc8360emds.c: In function ‘ft_board_setup’: mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | mpc83xx: fix remaining fdt_find_node_by_path referencesKim Phillips2008-01-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rename to fdt_path_offset Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837xKim Phillips2008-01-08-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x. This change guarantees that the environment will be located on the first flash sector after the U-Boot image. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxidKim Phillips2008-01-08-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type properties in the device tree so the PHY gets configured for internal delay on RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | | mpc83xx: update the CREDITS and MAINTAINERSDave Liu2008-01-08-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | update the CREDITS and MAINTAINERS. Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | | | mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemdsDave Liu2008-01-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the MAINTAINER and MAKEALL entries for mpc837xemds Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | | | mpc83xx: Add the MPC837xEMDS board readmeDave Liu2008-01-08-0/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the README.mpc837xemds to /doc Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | | | mpc83xx: Add the support of MPC837xEMDS boardDave Liu2008-01-08-3/+922
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC837xEMDS board support: * DDR2 400MHz hardcoded and SPD init * Local bus NOR Flash * I2C, UART, MII and RTC * eTSEC RGMII * PCI host Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | | | mpc83xx: Add the support of MPC8315E SoCDave Liu2008-01-08-10/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8315E SoC including e300c3 core and new IP blocks, such as TDM, PCI Express and SATA controller. Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | | | mpc83xx: Add the support of MPC837x SoCDave Liu2008-01-08-53/+406
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC837x SoC including e300c4 core and new IP blocks, such as SDHC, PCI Express and SATA controller. Signed-off-by: Dave Liu <daveliu@freescale.com>
| * | | | | MPC8360E-MDS: configure and enable second UARTAnton Vorontsov2008-01-08-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Despite user manual, BCSR9.7 is negated (high) on HRST, so UART2 is disabled. Fix that and configure QE pins properly. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
| * | | | | 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitionsTimur Tabi2008-01-08-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the currently-defined 83xx boards. This change guarantees that the environment will be located on the first flash sector after the U-Boot image. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | | | | Merge branch 'master' of /home/wd/git/u-boot/master/Wolfgang Denk2008-01-09-31/+45
|\ \ \ \ \ \
| * | | | | | Fix memset bug in ext2fs_read_file()Wolfgang Denk2008-01-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ext2fs_read_file() had the function arguments swapped. Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800 Signed-off-by: Wolfgang Denk <wd@denx.de>