summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk2007-08-18-26/+36
|\
| * Add CONFIG_HAS_ETH0 to all boards with TSECAndy Fleming2007-08-16-0/+20
| | | | | | | | | | | | | | | | | | The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether to update TSEC1's device-tree node, so we need to add it to all the boards with TSECs. Do this for 83xx and 86xx, too, since they will eventually do something similar. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * Update MPC8544 DS PCI memory mapKumar Gala2007-08-16-19/+15
| | | | | | | | | | | | | | | | | | | | | | The PCIe bus that the ULI M1575 is connected to has no possible way of needing more than the fixed amount of IO & Memory space needed by the ULI. So make it use far less IO & memory space and have it use the shared LAW. This free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed by each bus. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Fix up some fdt issues on 8544DSKumar Gala2007-08-16-7/+1
| | | | | | | | | | | | | | | | It looks like we had a merge issue that duplicated a bit of code in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get the MAC address properly set in the device tree on boot for TSEC1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xxWolfgang Denk2007-08-18-273/+474
|\ \
| * | mpc83xx: fix typo in DDR2 programmingKim Phillips2007-08-17-1/+1
| | | | | | | | | | | | | | | | | | | | | introduced in the implement board_add_ram_info patch as I was cleaning out the magic numbers. sorry. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: move freescale boards to boards/freescaleKim Phillips2007-08-16-9/+9
| | | | | | | | | | | | | | | | | | includes build fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: suppress unused variable 'val8' warningKim Phillips2007-08-16-1/+2
| | | | | | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: implement board_add_ram_infoKim Phillips2007-08-16-45/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add board_add_ram_info, to make memory diagnostic output more consistent. u-boot banner output now looks like: DRAM: 256 MB (DDR1, 64-bit, ECC on) and for boards with SDRAM on the local bus, a line such as this is added: SDRAM: 64 MB (local bus) also replaced some magic numbers with their equivalent define names. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card supportTony Li2007-08-16-84/+142
| | | | | | | | | | | | | | | | | | | | | The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board. Signed-off-by Tony Li <tony.li@freescale.com>
| * | mpc83xx: enable libfdt by default on freescale boardsKim Phillips2007-08-15-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | this enables libfdt code by default for the freescale mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx and gp boards. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: migrate remaining freescale boards to libfdtKim Phillips2007-08-15-48/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this adds libfdt support code for the freescale mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx, and gp boards. Boards remain compatible with OF_FLAT_TREE. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: move common /memory node update mechanism to cpu.cKim Phillips2007-08-15-60/+31
| | | | | | | | | | | | | | | | | | also adds common prototypes to include/common.h. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: remaining 8360 libfdt fixesKim Phillips2007-08-15-22/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI clocks and QE frequencies weren't being updated, and the core clock was being updated incorrectly. This patch also adds a /memory node if it doesn't already exist prior to update. plus some cosmetic trimming to single line comments. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: fix UEC2->1 typo in libfdt setup codeKim Phillips2007-08-15-1/+1
| | | | | | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdbKim Phillips2007-08-15-13/+18
| | | | | | | | | | | | | | | | | | and reorder the existing 83xx maintainers alpha. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | Merge with git+ssh://gemini_vpn/home/wd/git/u-boot/masterWolfgang Denk2007-08-18-19/+9
|\ \ \
| * | | lib_ppc: make board_add_ram_info weakKim Phillips2007-08-18-18/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | platforms wishing to display RAM diagnostics in addition to size, can do so, on one line, in their own board_add_ram_info() implementation. this consequently eliminates CONFIG_ADD_RAM_INFO. Thanks to Stefan for the hint. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bugShinya Kuribayashi2007-08-18-1/+3
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has been sent on: - 6 Jun 2007 Many users of PCI config read routines tend to ignore the function ret value, and are only concerned about the contents of *val. Based on this, pci_hose_read_config_{byte,word}_via_dword should initialize the *val on dword read error. Without this fix, for example, we'll go on scanning bus with vendor or header_type uninitialized. This brings many unnecessary config trials. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
* | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-16-551/+1051
|\ \ \ | |/ /
| * | fdt: suppress unused variable 'bd' warningKim Phillips2007-08-16-1/+0
| | | | | | | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | Fix warnings from of_data copy fixAndy Fleming2007-08-16-2/+2
| | | | | | | | | | | | | | | | | | Forgot to cast of_flat_tree to ulong. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Don't wait for disconnected TSECsAndy Fleming2007-08-16-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | The TSEC driver's PHY code waits a long time for autonegotiation to complete, even if the link is down. The PHY knows the link is down or up before autonegotiation completes, so we can short-circuit the process if the link is down. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Fix numerous bugs in the 8568 UEC supportAndy Fleming2007-08-16-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Actually, fixed a large bug in the UEC for *all* platforms. How did this ever work? uec_init() did not follow the spec for eth_init(), and returned 0 on success. Switch it to return the link like tsec_init() (and 0 on error) The immap for the 8568 was defined based on MPC8568, rather than CONFIG_MPC8568 CONFIG_QE was off CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0" Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is enabled Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Define tsec flag values in config filesAndy Fleming2007-08-16-37/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tsec_info structure and array has a "flags" field for each ethernet controller. This field is the only reason there are settings. Switch to defining TSECn_FLAGS for each controller in the config header, and we can greatly simplify the array, and also simplify the addition of future boards. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Add support for building all boards with a TSECAndy Fleming2007-08-16-1/+7
| | | | | | | | | | | | | | | | | | | | | Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards. Now we can do a MAKEALL test on all of them! Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Fix of_data copying for CONFIG_OF_FLAT_TREE-using boardsAndy Fleming2007-08-16-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed" neglected to *also* put the code inside the similar #ifdef for CONFIG_OF_FLAT_TREE. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | mpc885ads: Don't define CONFIG_BZIP2.Scott Wood2007-08-16-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | bzip2 requires a significant chunk of malloc space, and there isn't enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area and a downloaded image at 0x400000. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | Merge with /home/wd/git/u-boot/masterWolfgang Denk2007-08-16-477/+826
| |\ \
| | * | Minor Coding Style fix; Update CHANGELOG file.Wolfgang Denk2007-08-16-3/+580
| | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * | Merge with /home/wd/git/u-boot/custodian/u-boot-nand-flashWolfgang Denk2007-08-16-474/+246
| | |\ \
| | | * \ Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-15-176/+174
| | | |\ \ | | | | |/
| | | * | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-08-15-133217/+75485
| | | |\ \
| | | * | | Small coding style cleanupStefan Roese2007-07-09-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | | * | | Migrate esd 405EP boards to new NAND subsystemMatthias Fuchs2007-07-09-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unused CFG_NAND_LEGACY define These boards to not have NAND. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
| | | * | | Migrate esd 405EP boards to new NAND subsystemMatthias Fuchs2007-07-09-456/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate esd 405EP boards to new NAND subsystem -cleanup -use correct io accessors (in/out_be32()) Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
| | | * | | Migrate esd 405EP boards to new NAND subsystemMatthias Fuchs2007-07-09-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares the migration from the legacy NAND driver to U-Boot's new NAND subsystem for esd boards. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
| | | * | | [NAND] Bad block skipping for command nbootThomas Knobloch2007-07-06-5/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old implementation of command nboot does not support reading the image from NAND flash with skipping of bad blocks. The patch implements a new version of the nboot command: by calling nboot.jffs2 from the u-boot command line the command will load the image from NAND flash with respect to bad blocks (by using nand_read_opts()). This is similar to e.g. the NAND read command: "nand read.jffs2 ...". Signed-off-by: Thomas Knobloch <knobloch@siemens.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | | * | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-07-06-313/+2061
| | | |\ \ \
| | | * \ \ \ Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-07-04-510/+2448
| | | |\ \ \ \
| | | * | | | | [patch] add nand_init() prototype to nand.hMike Frysinger2007-06-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | since nand_init() is expected to be called by other parts of u-boot, there should be a prototype for it in nand.h Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Stefan Roese <sr@denx.de>
| | | * | | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-06-22-1524/+7212
| | | |\ \ \ \ \
| | | * \ \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-06-04-126/+245
| | | |\ \ \ \ \ \
| | | * | | | | | | [PATCH][NAND] Define the Vendor Id for Micron NAND FlashUlf Samuelsson2007-05-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ulf Samuelsson <ulf@atmel.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | | | | | Bios emulator - fix microblaze toolchain problemMichal Simek2007-08-16-10/+30
| |/ / / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | microblaze CPU have problem with bios_emulator code. Microblaze toolchain doesn't support PRAGMA PACK. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | | | | | | ppc7xx: Update CPCI750 boardStefan Roese2007-08-16-4/+87
| | |_|_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This small CPCI750 update extends the board specific command "show_config" to display the Marvell strapping registers and extends the PCI IDE controller. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | PPC4xx:HCU4/5 cleanupNiklaus Giger2007-08-16-29/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minor cleanups to confirm to the u-boot coding style. Some german expressions -> english. HCU5 enforces a unique IP adress for a given slot in the rack. Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
* | | | | | | | PPC4xx:HCU4/5 cleanup ecc/sdram initNiklaus Giger2007-08-16-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make ecc initialisation robust, as DDR2-ECC errors may be generated while zeroing the RAM. Return 16 bytes (a cacheline) less than the available memory, as the board and/or PPC440EPx might have problems accessing the last bytes. Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
* | | | | | | | ppc4xx: Remove #warning in esd auto_update.cStefan Roese2007-08-16-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | | ppc4xx: Only enable POST FPU test on Sequoia and not RainierStefan Roese2007-08-16-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-12-11 20:53:55 +0000