summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* microblaze: Remove XUPV2P boardMichal Simek2008-12-10-490/+0
| | | | | | | | | | | --- Microblaze platforms use generic settings and to have many platforms is confusing that's why I decided to remove this platform from U-BOOT. ml401 tree is sufficient for covering all Microblaze platforms. This change will go through microblaze custodian tree.
* microblaze: Remove CONFIG_LIBFDT due to error in common filesMichal Simek2008-12-10-2/+0
|
* microblaze: Fix ml401 uart16550 settingMichal Simek2008-12-10-7/+10
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* microblaze: Set up relocation is doneMichal Simek2008-12-10-0/+1
|
* libfdt: Fix redefined uintptr_t warning for USE_HOSTCCJerry Van Baren2008-12-10-0/+2
| | | | | | | | | | | | | Compiling U-Boot in an old OS environment (RedHat-7.3 :-) gives the following warnings from FDT: include/libfdt_env.h:50: warning: redefinition of 'uintptr_t' /usr/include/stdint.h:129: warning: 'uintptr_t' previously declared here Fix: Protect the definition of uintptr_t when compiling on the host system. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
* Moved sc520 PCI definitions to stand-alone fileGraeme Russ2008-12-10-22/+49
| | | | Signed Off By: Graeme Russ <graeme.russ@gmail.com>
* Fixed path to sc520 SSI include fileGraeme Russ2008-12-10-1/+1
| | | | Signed Off By: Graeme Russ <graeme.russ@gmail.com>
* Fixed build error due to #define of _LINUX_STRING_H_ in 82559_eeprom.cGraeme Russ2008-12-10-1/+0
| | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* serial: Add vcth UART driverStefan Roese2008-12-10-0/+122
| | | | | | This patch adds the UART driver for the upcoming VCTH board support. Signed-off-by: Stefan Roese <sr@denx.de>
* jffs2: cache data_crc resultsIlya Yanok2008-12-09-1/+5
| | | | | | | | | | | | | As we moved data_crc() invocation from jffs2_1pass_build_lists() to jffs2_1pass_read_inode() data_crc is going to be calculated on each inode access. This patch adds caching of data_crc() results. There is no significant improvement in speed (because of flash access caching added in previous patch I think, crc in RAM is really fast) but this patch impacts memory usage -- every b_node structure uses 12 bytes instead of 8. Signed-off-by: Alexey Neyman <avn@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* jffs2: summary supportIlya Yanok2008-12-09-1/+368
| | | | | | | This patch adds support for reading fs information from summary node instead of scanning full eraseblock. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* jffs2: add buffer to cache flash accessesIlya Yanok2008-12-09-45/+73
| | | | | | | | | | With this patch JFFS2 code allocates memory buffer of max_totlen size (size of the largest node, calculated during scan time) and uses it to store entire node. Speeds up loading. If malloc fails we use old ways to do things. Signed-off-by: Alexey Neyman <avn@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* jffs2: rewrite jffs2 scanning code based on Linux oneIlya Yanok2008-12-09-56/+171
| | | | | | | | | | | Rewrites jffs2_1pass_build_lists() function in style of Linux's jffs2_scan_medium() and jffs2_scan_eraseblock(). This includes: - Caching flash acceses - Smart dealing with free space Signed-off-by: Alexey Neyman <avn@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* jffs2: add sector_size field to part_info structureIlya Yanok2008-12-09-3/+18
| | | | | | | This patch adds sector_size field to part_info structure (used by new JFFS2 code). Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* jffs2: fix searching for latest version in jffs2_1pass_list_inodes()Ilya Yanok2008-12-09-3/+2
| | | | | | | | | We need to update i_version inside cycle to find really latest version inside jffs2_1pass_list_inodes(). With that fixed we can use isize inside dump_inode() instead of calling expensive jffs2_1pass_read_inode(). Signed-off-by: Alexey Neyman <avn@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* evb64260: fix "cast to pointer from integer of different size" warningsWolfgang Denk2008-12-09-3/+7
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2008-12-09-19/+30
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2008-12-09-19/+30
| |\
| | * USB: descriptor handlingStefan Althoefer2008-12-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, I found a bug when working with the u-boot USB subsystem on IXP425 processor (big endian Xscale aka ARMv5). I recognized that the second usb_endpoint_descriptor of the attached memory stick was corrupted. The reason for this are the packed structures below (either u-boot and u-boot-usb): -------------- /* Endpoint descriptor */ struct usb_endpoint_descriptor { unsigned char bLength; unsigned char bDescriptorType; unsigned char bEndpointAddress; unsigned char bmAttributes; unsigned short wMaxPacketSize; unsigned char bInterval; unsigned char bRefresh; unsigned char bSynchAddress; } __attribute__ ((packed)); /* Interface descriptor */ struct usb_interface_descriptor { unsigned char bLength; unsigned char bDescriptorType; unsigned char bInterfaceNumber; unsigned char bAlternateSetting; unsigned char bNumEndpoints; unsigned char bInterfaceClass; unsigned char bInterfaceSubClass; unsigned char bInterfaceProtocol; unsigned char iInterface; unsigned char no_of_ep; unsigned char num_altsetting; unsigned char act_altsetting; struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; } __attribute__ ((packed)); ------------ As usb_endpoint_descriptor is only 7byte in length, the start of all odd ep_desc[] structures is not word aligned. This makes wMaxPacketSize of these structures also not word aligned. ARMv5 Architecture however does not support non-aligned multibyte data type (see A2.8 of ARM Architecture Reference Manual). Signed-off-by: Stefan Althoefer <stefan.althoefer@web.de> Signed-off-by: Remy Böhmer <linux@bohmer.net>
| | * usbtty/omap: update to current APIJean-Christophe PLAGNIOL-VILLARD2008-12-09-18/+29
| | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Remy Böhmer <linux@bohmer.net>
* | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2008-12-09-2/+0
|\ \ \ | |/ /
| * | video: fix FADS823 and RRvision compiling issuesAnatolij Gustschin2008-12-09-2/+0
| |/ | | | | | | | | | | | | | | Since commit 561858ee building for FADS823 and RRvision doesn't work. Let's include version.h and timestamp.h unconditionally to fix the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | drivers/fsl_pci_init: Fix compile warningKumar Gala2008-12-09-0/+2
|/ | | | | | | | | fsl_pci_init.c: In function 'fsl_pci_setup_inbound_windows': fsl_pci_init.c:122: warning: comparison is always true due to limited range of data type The check only makes sense if we are CONFIG_PHYS_64BIT Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-at91Wolfgang Denk2008-12-09-20/+154
|\
| * Remove redundant armv4 flag from arm926ejs compile flagsRemy Bohmer2008-12-06-2/+1
| | | | | | | | | | | | | | Currently the arm926ejs tree has the armv4 option set during compilation. This flag does not belong here because a arm926 CPU is always a armv5 CPU. Signed-off-by: Remy Bohmer <linux@bohmer.net>
| * at91: Choose environment variables location within make config targetNicolas Ferre2008-12-06-18/+153
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the possiblity to choose the media where the environment will be located. This allow to choose this fundamental configuration without editing config files. Documentation file added. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Stelian Pop <stelian@popies.net> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2008-12-09-13/+30
|\ \
| * | net: Fix TftpStart() ip:filename bugPeter Tyser2008-12-04-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TftpStart() function modifies the 'BootFile' string when 'BootFile' contains both an IP address and filename (eg 1.2.3.4:/path/file). This causes subsequent calls to TftpStart to incorrectly parse the TFTP filename and server IP address to use. For example: => tftp 0x100000 10.52.0.62:/home/ptyser/non_existant Speed: 100, half duplex Using eTSEC1 device TFTP from server 10.52.0.62; our IP address is 10.52.253.79 ^^^^^^^^^^ CORRECT Filename '/home/ptyser/non_existant'. ^^^^^^^^^^^^^^^^^^^^^^^^^ CORRECT Load address: 0x100000 Loading: * TFTP error: 'File not found' (1) Starting again eTSEC2: No link. Speed: 100, half duplex Using eTSEC1 device TFTP from server 10.52.0.33; our IP address is 10.52.253.79 ^^^^^^^^^^ WRONG Filename '10.52.0.62'. ^^^^^^^^^^ WRONG Load address: 0x100000 Loading: * TFTP error: 'File not found' (1) Starting again TftpStart() was modified to not modify the 'BootFile' string. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: Add additional IP fragmentation checkPeter Tyser2008-12-04-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Ignore IP packets which have the "more fragments" flag bit set. This flag indicates the IP packet is fragmented and must be ignored by U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: Define IP flag field valuesPeter Tyser2008-12-04-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | These defines were pulled from the "Add simple IP/UDP fragmentation support" patch from Frank Haverkamp <haver@vnet.ibm.com>. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: tsec: Fix Marvell 88E1121R phy initAnatolij Gustschin2008-12-04-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch tries to ensure that phy interrupt pin won't be asserted after booting. We experienced following issues with current 88E1121R phy init: Marvell 88E1121R phy can be hardware-configured to share MDC/MDIO and interrupt pins for both ports P0 and P1 (e.g. as configured on socrates board). Port 0 interrupt pin will be shared by both ports in such configuration. After booting Linux and configuring eth0 interface, port 0 phy interrupts are enabled. After rebooting without proper eth0 interface shutdown port 0 phy interrupts remain enabled so any change on port 0 (link status, etc.) cause assertion of the interrupt. Now booting Linux and configuring eth1 interface will cause permanent phy interrupt storm as the registered phy 1 interrupt handler doesn't acknowledge phy 0 interrupts. This of course should be fixed in Linux driver too. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: Fix download command parsingPeter Tyser2008-12-04-8/+12
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_SYS_HUSH_PARSER is defined network download commands with 1 argument in the format 'tftp "/path/file"' do not work as expected. The hush command parser strips the quotes from "/path/file" which causes the network commands to interpret "/path/file" as an address instead of the intended filename. The previous check for a leading quote in netboot_common() was replaced with a check which ensures only valid numbers are treated as addresses. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Section name should be ".data", not "data"Trent Piepho2008-12-09-10/+8
| | | | | | | | | | Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
* | MAKEALL: Automatically use parallel buildsWolfgang Denk2008-12-09-1/+10
| | | | | | | | | | | | | | | | | | | | | | Add logic to the MAKEALL script to determine the number of CPU cores on the system, and run a parallel build if there is more than one. Usually this significantrly accelerates builds. Allow to manually adjust the number of parallel make jobs by using the "BUILD_NCPUS" environment variable. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | vxworks.h: Fix build problem introduced by commits 29a4c24d/e9084b23Wolfgang Denk2008-12-09-1/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | avr32/bootm: remove unused variable 'ret'Jean-Christophe PLAGNIOL-VILLARD2008-12-08-1/+0
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | Remove unneeded CONFIG_SHELL referencesPeter Tyser2008-12-08-9/+3
| | | | | | | | | | | | | | Make should be using the bash shell by default which makes CONFIG_SHELL unnecessary Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | Use bash for default GNU Make shell applicationPeter Tyser2008-12-08-1/+6
| | | | | | | | | | | | | | | | Some Make script commands rely on bash-specific features like brace expansion, so default to bash for the SHELL variable with a fallback to the standard sh shell Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | jffs2: rename devices_init () in common/jffs2.cHeiko Schocher2008-12-08-7/+7
| | | | | | | | | | | | | | | | rename devices_init () in common/jffs2.c to jffs2_devices_init (), because there is also a devices_init () in common/devices.c. Signed-off-by: Heiko Schocher <hs@denx.de>
* | SPARC: Fixed compiler error introduced by commit c160a9544743Daniel Hellstrom2008-12-07-1/+2
| | | | | | | | | | | | | | This patch fixes a build error for the SPARC platform. It was introduced by commit c160a9544743e80e8889edb2275538e7764ce334. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
* | mgsuvd add the board-specific part of the HDLC driverGary Jennejohn2008-12-07-1/+280
| | | | | | | | Signed-off-by: Gary Jennejohn <garyj@denx.de>
* | mgcoge add the board-specific part of the HDLC driverGary Jennejohn2008-12-07-1/+278
| | | | | | | | Signed-off-by: Gary Jennejohn <garyj@denx.de>
* | keymile add the common parts of the HDLC driverGary Jennejohn2008-12-07-0/+749
| | | | | | | | | | | | | | This implements the ICN protocol used across the backplane and is needed by all the keymile boards. Signed-off-by: Gary Jennejohn <garyj@denx.de>
* | drivers/bios_emulator: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2008-12-07-48/+2
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | common/cmd_ide.c: Corrected endian order printing for compact flash serial ↵Richard Retanubun2008-12-07-3/+4
| | | | | | | | | | | | | | | | number. Corrected endian order printing for compact flash serial number. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
* | IOMUX: Add console multiplexing support.Gary Jennejohn2008-12-07-1/+498
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modifications to support console multiplexing. This is controlled using CONFIG_SYS_CONSOLE_MUX in the board configuration file. This allows a user to specify multiple console devices in the environment with a command like this: setenv stdin serial,nc. As a result, the user can enter text on both the serial and netconsole interfaces. All devices - stdin, stdout and stderr - can be set in this manner. 1) common/iomux.c and include/iomux.h contain the environment setting implementation. 2) doc/README.iomux contains a somewhat more detailed description. 3) The implementation in (1) is called from common/cmd_nvedit.c to handle setenv and from common/console.c to handle initialization of input/output devices at boot time. 4) common/console.c also contains the code needed to poll multiple console devices for input and send output to all devices registered for output. 5) include/common.h includes iomux.h and common/Makefile generates iomux.o when CONFIG_SYS_CONSOLE_MUX is set. Signed-off-by: Gary Jennejohn <garyj@denx.de>
* | strings: use puts() rather than printf()Mike Frysinger2008-12-07-1/+2
| | | | | | | | | | | | | | | | When running `strings` on really long strings, the stack tends to get smashed due to printf(). Switch to puts() instead since we're only passing the data through. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Use new CONFIG_SYS_VXWORKS parameters for Netstal boardsNiklaus Giger2008-12-07-15/+14
| | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
* | cmd_elf.c: Cleanup bootvx and handle new CONFIG_SYS_VXWORKS parametersNiklaus Giger2008-12-07-47/+30
| | | | | | | | | | | | | | | | | | | | | | | | - fix size too small by one in sprintf - changed old (pre 2004) device name ibmEmac to emac - boot device may be overriden in board config - servername may be defined in board config - additional parameters may be defined in board config - fixed some line wrappings - replaced redundant MAX define by max Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
* | Add vxworks.h to handle CONFIG_SYS_VXWORKS parametersNiklaus Giger2008-12-07-0/+53
| | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
generated by cgit v1.1 at 2024-12-30 05:12:45 +0000