summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Remove compiler warning from previous commitStefan Roese2007-10-31-1/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Remove temporary TLB entry in POST cache testStefan Roese2007-10-31-0/+2
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Change autonegotiation timeout from 4 to 5 secondsStefan Roese2007-10-31-1/+1
| | | | | | | | I lately noticed, that newer 4xx board with GBit support sometimes don't finish link autonegotiation in 4 seconds. Changing this timeout to 5 seconds seems fine here. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friendsStefan Roese2007-10-31-73/+74
| | | | | | | This patch changes all in32/out32 calls to use the recommended in_be32/ out_be32 macros instead. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix POST ethernet test for HaleakalaStefan Roese2007-10-31-7/+29
| | | | | | | | The POST ethernet test needed to be changed to dynamically determine the count of ethernet devices. This code is cloned from the 4xx ethernet driver. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Correct UART input clock calculation and passing to fdtStefan Roese2007-10-31-5/+10
| | | | | | | | We now use a value in the gd (global data) structure for the UART input frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely in get_sys_info(). Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board supportStefan Roese2007-10-31-5/+50
| | | | | | | | | | The Haleakala is nearly identical with the Kilauea eval board. The only difference is that the 405EXr only supports one EMAC and one PCIe interface. This patch adds support for the Haleakala board by using the identical image for Kilauea and Haleakala. The distinction is done by comparing the PVR. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAMEugene O'Brien2007-10-31-2/+8
| | | | | | | | | | | | | This patch also adds a note to the fixed DDR setup for Bamboo NAND booting: Note: As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM modules are still plugged in. So it is recommended to remove the DIMM modules while using the NAND booting code with the fixed SDRAM setup! Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boardsStefan Roese2007-10-31-1/+3
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Rework of 4xx serial driver (4)Stefan Roese2007-10-31-167/+146
| | | | | | | | | | | | Change 4xx_uart.c: - Use in_8/out_8 macros instead of in8/out8 - No need for UART_BASE marco anymore, now really handled via function parameter - serial_init_common() introduced - Further coding style cleanup Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Rework of 4xx serial driver (3)Stefan Roese2007-10-31-1/+1
| | | | | | Change all linker scripts to reference the changed driver name iop480_uart.o. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Rework of 4xx serial driver (2)Stefan Roese2007-10-31-316/+40
| | | | | | | | | | Change all linker scripts to reference the changed driver name 4xx_uart.o. Note: In most cased all these explicit referencing of these object files in the linker scripts is not neccessary. Only for manually embedded environment into the U-Boot image, which is not done is most cases. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Rework of 4xx serial driver (1)Stefan Roese2007-10-31-208/+243
| | | | | | | | | This patch starts the rework of the PPC4xx serial driver. First we split the file into two seperate files, one 4xx_uart.c with the 405/440 UART handling code and the other one iop480_uart.c with the UART code for the PLX-Tech IOP480 PPC (PPC403 based). Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Correct UART input clock calculation and passing to fdtStefan Roese2007-10-31-4/+15
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add initial AMCC Makalu 405EX supportStefan Roese2007-10-31-0/+1620
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add freqUART to CPU speed detectionStefan Roese2007-10-31-8/+24
| | | | | | | This value is needed later for the device tree configuration of the uart clock. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc: Small Kilauea cleanup of config fileStefan Roese2007-10-31-2/+2
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* rtc: Add Xicor/Intersil X1205 RTC supportStefan Roese2007-10-31-1/+199
| | | | | | | | | | | | | This patch adds support for the Xicor/Intersil X1205 RTC used on the AMCC Makalu eval board. This driver is basically cloned from the Linux driver version (2.6.23). This patch also introduces the Linux bcd.h header for the BCD2BIN/ BIN2BCD conversions. In the future some of the other U-Boot RTC driver should be converted to also use this header instead of implementing their own local copy of these functions/macros. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xxStefan Roese2007-10-31-202/+113
| | | | | | | | | | This patch moves some common 4xx macros and the PPC405_SYS_INFO/ PPC440_SYS_INFO structure into the common ppc4xx.h header. Lot's of other macros are good candidates to be consolidated this way in the future. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix size setup in Kilauea DDR2 init routineStefan Roese2007-10-31-26/+26
| | | | | | | | | The size was initilized wrong. Instead of 256MB, the DDR2 controller was setup to 512MB. Now the correct values is used. This patch also does a little cleanup and adds a comment here. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Define CONFIG_BOOKE for all PPC440 based processorsEugene O'Brien2007-10-31-0/+5
| | | | | | | | CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR number is used to access system registers. Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Change inbound PCIe location for endpoint tests on KatmaiStefan Roese2007-10-31-1/+1
| | | | | | | | | | | | On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which is the internal SRAM. Since I now ported and tested this endpoint mode on Kilauea successfully to map to 0 (SDRAM), I also changed this for Katmai. Yucca will stay at internal SRAM for now. Not sure if somebody relies on this setup. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add PCIe endpoint support on Kilauea (405EX)Stefan Roese2007-10-31-13/+29
| | | | | | | | | | | | This patch adds endpoint support for the AMCC Kilauea eval board. It can be tested by connecting a reworked PCIe cable (only 1x lane singles connected) to another root-complex. In this test setup, a 64MB inbound window is configured at BAR0 which maps to 0 on the PLB side. So accessing this BAR0 from the root-complex will access the first 64MB of the SDRAM on the PPC side. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint modeStefan Roese2007-10-31-105/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for dynamic configuration of PCIe ports for the AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe boards Yucca & Katmai and the 405EX board Kilauea. This dynamic configuration is done via the "pcie_mode" environement variable. This variable can be set to "EP" or "RP" for endpoint or rootpoint mode. Multiple values can be joined via the ":" delimiter. Here an example: pcie_mode=RP:EP:EP This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2 as endpoint. Per default Yucca will be configured as: pcie_mode=RP:EP:EP Per default Katmai will be configured as: pcie_mode=RP:RP:REP Per default Kilauea will be configured as: pcie_mode=RP:RP Signed-off-by: Tirumala R Marri <tmarri@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Enable device tree support (fdt) on Kilauea per defaultStefan Roese2007-10-31-43/+17
| | | | | | | | | | | | | This patch enables the fdt support on the AMCC Kilauea eval board. Additionally now EBC ranges fdt fixup is included to support NOR FLASH mapping via the Linux physmap_of driver. This Kilauea port now support booting arch/ppc and arch/powerpc Linux kernels. The default environment "net_nfs" is for arch/ppc and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc support will be removed. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add additional debug info to 4xx fdt supportStefan Roese2007-10-31-0/+2
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix small merge problems with CPCI440 and Acadia boardsStefan Roese2007-10-31-257/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix small merge problem in 4xx_enet.cStefan Roese2007-10-31-1/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add initial AMCC Kilauea 405EX supportStefan Roese2007-10-31-0/+1616
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add PPC405EX supportStefan Roese2007-10-31-145/+1205
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)Stefan Roese2007-10-31-0/+11
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)Stefan Roese2007-10-31-0/+171
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* POST: Add 405EX support to 4xx UART POST testStefan Roese2007-10-31-2/+13
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* DTT: Prepare DS1775 driver for use of different I2C addressesStefan Roese2007-10-31-1/+2
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: 4xx_pcie: Change PCIe status output to match common styleStefan Roese2007-10-31-2/+2
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: 4xx_pcie: Disable debug output as defaultStefan Roese2007-10-31-1/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support addedStefan Roese2007-10-31-51/+79
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & KatmaiStefan Roese2007-10-31-3/+26
| | | | | | | | | | | | | | | | | 128MB seems to be the smallest possible value for the memory size for on PCIe port. With this change now the BAR's of the PCIe cards are accessible under U-Boot. One big note: This only works for PCIe port 0 & 1. For port 2 this currently doesn't work, since the base address is now 0xc0000000 (0xb0000000 + 2 * 0x08000000), and this is already occupied by CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean to change the base addresses completely and this change would have too much impact right now. This patch adds debug output to the 4xx pcie driver too. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idxStefan Roese2007-10-31-6/+6
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platformsStefan Roese2007-10-31-11/+11
| | | | | | | | These files were introduced with the IBM 405GP but are currently used on all 4xx PPC platforms. So the name doesn't match the content anymore. This patch renames the files to 4xx_pci.c/h. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add a comment for 405EX PCIe endpoint configurationStefan Roese2007-10-31-0/+6
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)Stefan Roese2007-10-31-421/+322
| | | | | | | | | | | | | | | (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access the SDR registers of the PCIe ports. This makes the overall design clearer, since it removed a lot of switch statements which are not needed anymore. Also, the functions ppc4xx_init_pcie_rootport() and ppc4xx_init_pcie_entport() are merged into a single function ppc4xx_init_pcie_port(), since most of the code was duplicated. This makes maintainance and porting to other 4xx platforms easier. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)Stefan Roese2007-10-31-33/+26
| | | | | | | | | | | This patch is the first patch of a series to make the 440SPe PCIe code usable on different 4xx PPC platforms. In preperation for the new 405EX which is also equipped with PCIe interfaces. (2) This patch renames the functions from 440spe_ to 4xx_ with a little additional cleanup Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)Stefan Roese2007-10-31-12/+10
| | | | | | | | | | This patch is the first patch of a series to make the 440SPe PCIe code usable on different 4xx PPC platforms. In preperation for the new 405EX which is also equipped with PCIe interfaces. (1) This patch renames the files from 440spe_pcie to 4xx_pcie Signed-off-by: Stefan Roese <sr@denx.de>
* Merge git://www.denx.de/git/u-bootStefan Roese2007-10-27-228/+573
|\
| * TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).Bartlomiej Sieka2007-10-25-2/+2
| | | | | | | | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * Merge branch 'motionpro_ng' of /home/tur/git/u-bootWolfgang Denk2007-10-24-14/+21
| |\
| | * Motion-PRO: Update configuration to accomodate next generation board.Bartlomiej Sieka2007-10-23-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New board has faster oscillator and a different Flash chip. This affects: - CFG_MPC5XXX_CLKIN - SDRAM timings - Flash CS configuration (timings) - Flash sector size, and thus MTD partition layout - malloc() arena size (due to bigger Flash sectors) - smaller memory test range (due to bigger malloc() arena) This patch also enables more extensive memory testing via "mtest". Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| | * Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.Bartlomiej Sieka2007-10-23-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay register must be written a value of 0x00000004 as the first step of the SDRAM contorller configuration. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | TQM5200: fix spurious characters on second serial interfaceMartin Krause2007-10-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch PSC3 is configured as UART. This is done, because if the pins of PSC3 are not configured at all (-> all pins are GPI), due to crosstalk, spurious characters may be send over the RX232_2_TXD signal line. Signed-off-by: Martin Krause <martin.krause@tqs.de>
generated by cgit v1.1 at 2024-12-12 21:45:10 +0000