summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* FAT: initialize all fields in cur_part_info, simplify initStephen Warren2012-10-25-2/+6
| | | | | | | | | | | | | | cur_part_info.{name,type} are strings. So, we don't need to memset() the entire thing, just put the NULL-termination in the first byte. Add missing initialization of the bootable and uuid fields. None of these fields are actually used by fat.c. However, since it stores the entire disk_partition_t, we should make sure that all fields are valid. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* FAT: remove cur_part_nrStephen Warren2012-10-25-7/+2
| | | | | | | | | | | | | | | A future patch will implement the more standard filesystem API fat_set_blk_dev(). This API has no way to know which partition number the partition represents. Equally, future DM rework will make the concept of partition number harder to pass around. So, simply remove cur_part_nr from fat.c; its only use is in a diagnostic printf, and the context where it's printed should make it obvious which partition is referred to anyway (since the partition ID would come from the user command-line that caused it). Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* drivers/serial/serial_ns16550.c: sparse fixesKim Phillips2012-10-25-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | serial_ns16550.c:222:1: warning: symbol 'eserial1_init' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_setbrg' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_getc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_tstc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_putc' was not declared. Should it be static? serial_ns16550.c:222:1: warning: symbol 'eserial1_puts' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_init' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_setbrg' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_getc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_tstc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_putc' was not declared. Should it be static? serial_ns16550.c:225:1: warning: symbol 'eserial2_puts' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_init' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_setbrg' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_getc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_tstc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_putc' was not declared. Should it be static? serial_ns16550.c:228:1: warning: symbol 'eserial3_puts' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_init' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_setbrg' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_getc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_tstc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_putc' was not declared. Should it be static? serial_ns16550.c:231:1: warning: symbol 'eserial4_puts' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* drivers/i2c/fsl_i2c.c: sparse fixKim Phillips2012-10-25-1/+1
| | | | | | | fsl_i2c.c:217:14: warning: symbol 'get_i2c_clock' was not declared. Should it be static? Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Heiko Schocher <hs@denx.de>
* ColdFire: Add Freescale MCF54418TWR ColdFire development board supportAlison Wang2012-10-24-0/+992
| | | | | | | | Add Freescale MCF54418TWR ColdFire development board support. Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com>
* ColdFire: Add MCF5441x CPU supportAlison Wang2012-10-24-54/+1967
| | | | | | | | | | | | | Add MCF5441x CPU support. The MCF5441x devices are a family of highly-integrated 32-bit microprocessors based on the Version 4m ColdFire microarchitecture, comprising of the V4 integer core, memory management unit(MMU) and enchanced multiply-accumulate unit(EMAC). Signed-off-by: TsiChung Liew <tsicliew@gmail.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com>
* ColdFire: Fix unused variable in cpu_init.cAlison Wang2012-10-24-3/+5
| | | | | | | | | | | Fix the following build warnings in cpu_init.c: cpu_init.c: In function 'cpu_init_f': cpu_init.c:47:9: warning: unused variable 'pll' cpu_init.c:46:10: warning: unused variable 'fbcs' cpu_init.c:44:10: warning: unused variable 'scm1' Signed-off-by: Alison Wang <b18965@freescale.com>
* km83xx: add kmvect1 boardGerlando Falauto2012-10-23-4/+14
| | | | | | | | | Add support for the new kmvect1 board powered by the mpc8309 processor. As this board is very similar to the existing suvd3, instead of adding a new config header file, just add a new config option to suvd3.h Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* km83xx: add common support for km8309 boardsGerlando Falauto2012-10-23-1/+183
| | | | | | | | | Add support for Keymile boards based on mpc8309 (it would be only kmvect1 for now) Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> [#elseif -> #if to allow kmcoge5ne and kmeter1 to build successfully] Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: add support for mpc8309Gerlando Falauto2012-10-23-10/+249
| | | | | | | | | This processor, though very similar to other members of the PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides yet another feature set than any supported sibling. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* cleanup: introduce CONFIG_MPC830xGerlando Falauto2012-10-23-3/+8
| | | | | | | | | Introduce a new configuration token CONFIG_MPC830x to be shared among mpc8308 and mpc8309. Define it for existing 8308 boards, and refactor existing common code so to make future introduction of 8309 simpler. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* cleanup: use CONFIG_QE instead of CONFIG_MPC8360 || CONFIG_MPC832xGerlando Falauto2012-10-23-4/+4
| | | | | | | | | simplify #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) for qe variables with #if defined(CONFIG_QE) Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* cosmetic: suvd3: align #definesGerlando Falauto2012-10-23-3/+3
| | | | | Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fdtTom Rini2012-10-22-32/+592
|\
| * Merge branch 'next'Gerald Van Baren2012-10-22-32/+592
| |\
| | * libfdt: Add helper function to create a trivial, empty treeGerald Van Baren2012-10-15-1/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The libfdt read/write functions are now usable enough that it's become a moderately common pattern to use them to build and manipulate a device tree from scratch. For example, we do so ourself in our rw_tree1 testcase, and qemu is starting to use this model when building device trees for some targets such as e500. However, the read/write functions require some sort of valid tree to begin with, so this necessitates either having a trivial canned dtb to begin with or, more commonly, creating an empty tree using the serial-write functions first. This patch adds a helper function which uses the serial-write functions to create a trivial, empty but complete and valid tree in a supplied buffer, ready for manipulation with the read/write functions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> From git://git.jdl.com/software/dtc.git patch hash be6026838 with adaptations to include/libfdt.h and lib/libfdt/Makefile for the U-Boot environment. Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
| | * fdt: Check for a token to skip auto-hash validationJoe Hershberger2012-10-15-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the itb file to declare to u-boot that its hash should not be checked automatically on bootm or iminfo. This allows an image to either be checked automatically or to include a script which may check it otherwise (such as after part of the itb has been relocated to RAM by the script). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| | * fdt: Identify scripts in ITBs as printable stringsJoe Hershberger2012-10-15-3/+3
| | | | | | | | | | | | | | | | | | | | | Scripts in the ITB format will have spaces in them and will end in a newline charachter. Make sure that these are considered printable. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| | * fdt: Add get commands to fdtJoe Hershberger2012-10-15-0/+144
| | | | | | | | | | | | | | | | | | | | | Add commands to access data in the fdt. This allows data from a dtb or itb to be accessed from the shell scripts. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| | * fdt: Limit printed hex in fdt print and list commandsJoe Hershberger2012-10-15-12/+24
| | | | | | | | | | | | | | | | | | | | | | | | Prevent printing the entire image in a itb. It is most likely unhelpful to have the hex of the entire image scroll for minutes on your slow serial console. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| | * fdt: Check error codes returned from fdtlib when loading ITBJoe Hershberger2012-10-15-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Before this patch, error codes returned from fdtlib were ignored and continued access would cause a crash. Now just check if the image is truncated and error if so. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| | * libfdt: Add helpers for 64-bit integer propertiesDavid Gibson2012-10-15-23/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In device trees in the world, properties consisting of a single 64-bit integer are not as common as those consisting of a single 32-bit, cell sized integer, but they're common enough that they're worth including convenience functions for. This patch adds helper wrappers of fdt_setprop_inplace(), fdt_setprop() and fdt_appendprop() for handling 64-bit integer quantities in properties. For better consistency with the names of these new *_u64() functions we also add *_u32() functions as alternative names for the existing *_cell() functions handling 32-bit integers. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
| | * libfdt: Add support for appending the values to a existing propertyMinghuan Lian2012-10-15-0/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some properties may contain multiple values, these values may need to be added to the property respectively. this patch provides this functionality. The main purpose of fdt_append_prop() is to append the values to a existing property, or create a new property if it dose not exist. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxTom Rini2012-10-22-513/+6764
|\ \ \
| * | | 85xx: Protect timeout_save variable with ifdefsAndy Fleming2012-10-22-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timeout_save variable was only used by the DDR111_134 erratum code. It was being set, but never used. Newer compilers will actually complain about this. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/boot: Change the compile macro for SRIO & PCIE boot master moduleLiu Gang2012-10-22-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the SRIO and PCIE boot master module will be compiled into the u-boot image if the macro "CONFIG_FSL_CORENET" has been defined. And this macro has been included by all the corenet architecture platform boards. But in fact, it's uncertain whether all corenet platform boards support this feature. So it may be better to get rid of the macro "CONFIG_FSL_CORENET", and add a special macro for every board which can support the feature. This special macro will be defined in the header file "arch/powerpc/include/asm/config_mpc85xx.h". It will decide if the SRIO and PCIE boot master module should be compiled into the board u-boot image. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | phylib: Enable SMSC LAN87xx PHY supportMingkai Hu2012-10-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | LAN8720 PHY is used on Freescale C2X0QDS board. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/espi: remove write command length checkShaohui Xie2012-10-22-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current espi controller driver assumes the command length of write command is not equal to '1', it was made based on SPANSION SPI flash, but some SPI flash driver such as SST does use write command length as '1', so write command on SST SPI flash will not work. And the length check for write command is not necessary for SPANSION, though it's harmless for SPANSION, it will stop write operation on flashes like SST, so we remove the check. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/fm: fix TBI PHY address settingsshaohui xie2012-10-22-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TBI PHY address (TBIPA) register is set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c, and it is supposed to set TBIPA on FM1@DTSEC1 in case of FM1@DTSEC1 isn't used directly, which provides MDIO for other ports. So following code is wrong in case of FM2, which has a different mac base. struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; /* Assign a Physical address to the TBI */ out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE); Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | poweprc/85xx: add QMan frequency info and fdt fixup.Haiying Wang2012-10-22-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting from QMan3.0, the QMan clock cycle needs be exposed so that the kernel driver can use it to calculate the shaper prescaler and rate. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | mpc85xx/portals: Add qman and bman ip_cfg field into portal infoHaiying Wang2012-10-22-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because QMan3.0 and BMan2.1 used ip_cfg in ip_rev_2 register to differ the total portal number, buffer pool number etc, we can use this info to limit those resources in kernel driver. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/t4qds: Add T4QDS boardYork Sun2012-10-22-0/+2456
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The T4240QDS is a high-performance computing evaluation, development and test platform supporting the T4240 QorIQ Power Architecture™ processor. SERDES Connections 32 lanes grouped into four 8-lane banks Two “front side” banks dedicated to Ethernet Two “back side” banks dedicated to other protocols DDR Controllers Three independant 64-bit DDR3 controllers Supports rates up to 2133 MHz data-rate Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller QIXIS System Logic FPGA Each DDR controller has two DIMM slots. The first slot of each controller has up to 4 chip selects to support single-, dual- and quad-rank DIMMs. The second slot has only 2 chip selects to support single- and dual-rank DIMMs. At any given time, up to total 4 chip selects can be used. Detail information can be found in doc/README.t4qds Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Add CONFIG_DDR_CLK_FREQ for corenet platformYork Sun2012-10-22-10/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New corenet platforms with chassis2 have separated DDR clock inputs. Use CONFIG_DDR_CLK_FREQ for DDR clock. This patch also cleans up the logic of detecting and displaying synchronous vs asynchronous mode. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1York Sun2012-10-22-112/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move spin table to cached memory to comply with ePAPR v1.1. Load R3 with 64-bit value if CONFIG_SYS_PPC64 is defined. 'M' bit is set for DDR TLB to maintain cache coherence. See details in doc/README.mpc85xx-spin-table. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Remove R6 from spin tableYork Sun2012-10-22-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | R6 was in ePAPR draft version but was dropped in official spec. Removing it to comply. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc8xxx: Fix DDR SPD failed messageYork Sun2012-10-22-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since empty DIMM slot is allowed on other than the first slot, remove the error message if SPD is not found in this case. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc8xxx: Add auto select bank interleaving modeYork Sun2012-10-22-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on populated DIMMs, automatically select from cs0_cs1_cs2_cs3 or cs0_cs1 interleaving, or non-interleaving if not available. Fix the message of interleaving disabled if controller interleaving is enabled but DIMMs don't support it. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Add workaround for DDR erratum A004934York Sun2012-10-22-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After DDR controller is enabled, it performs a calibration for the transmit data vs DQS paths. During this calibration, the DDR controller may make an inaccurate calculation, resulting in a non-optimal tap point. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: software workaround for DDR erratum A-004468York Sun2012-10-22-18/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot space translation utilizes the pre-translation address to select the DDR controller target. However, the post-translation address will be presented to the selected DDR controller. It is possible that the pre- translation address selects one DDR controller but the post-translation address exists in a different DDR controller when using certain DDR controller interleaving modes. The device may fail to boot under these circumstances. Note that a DDR MSE error will not be detected since DDR controller bounds registers are programmed to be the same when configured for DDR controller interleaving. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc8xxx: Fix DDR initialization waiting for D_INITYork Sun2012-10-22-27/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ECC is enabled, DDR controller needs to initialize the data and ecc. The wait time can be calcuated with total memory size, bus width, bus speed and interleaving mode. If it went wrong, it is bettert to timeout than waiting for D_INIT to clear, where it probably hangs. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc8xxx: Fix DDR driver handling quad-rank DIMMs and address calculationYork Sun2012-10-22-17/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix handling quad-rank DIMMs in a system with two DIMM slots and first slot supports both dual-rank DIMM and quad-rank DIMM. For systems with quad-rank DIMM and double dual-rank DIMMs, cs_config registers need to be enabled to maintain proper ODT operation. The inactive CS should have bnds registers cleared. Fix the turnaround timing for systems with all chip-selects enabled. This wasn't an issue before because DDR was running lower than 1600MT/s with this interleaving mode. Fix DDR address calculation. It wasn't an issue until we have multiple controllers with each more than 4GB and interleaving is disabled. It also fixes the message of DDR: 2 GiB (DDR3, 64-bit, CL=0.5, ECC off) when debugging DDR and first DDR controller is disabled. With the fix, the first enabled controller information will be displayed. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc8xxx: Update DDR registersYork Sun2012-10-22-3/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DDRC ver 4.7 adds DDR_SLOW bit in sdram_cfg_2 register. This bit needs to be set for speed lower than 1250MT/s. CDR1 and CDR2 are control driver registers. ODT termination valueis for IOs are defined. Starting from DDRC 4.7, the decoding of ODT for IOs is 000 -> Termsel off 001 -> 120 Ohm 010 -> 180 Ohm 011 -> 75 Ohm 100 -> 110 Ohm 101 -> 60 Ohm 110 -> 70 Ohm 111 -> 47 Ohm Add two write leveling registers. Each QDS now has its own write leveling start value. In case of zero value, the value of QDS0 will be used. These values are board-specific and are set in board files. Extend DDR register timing_cfg_1 to have 4 bits for each field. DDR control driver registers and write leveling registers are added to interactive debugging for easy access. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | fm/mEMAC: add mEMAC frame workRoy Zang2012-10-22-5/+661
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The multirate ethernet media access controller (mEMAC) interfaces to 10Gbps and below Ethernet/IEEE 802.3 networks via either RGMII/RMII interfaces or XAUI/XFI/SGMII/QSGMII using the high-speed SerDes interface. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Add B4860 and variant SoCsYork Sun2012-10-22-0/+354
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale B4860 and variant SoCs. Features of B4860 are (incomplete list): Six fully-programmable StarCore SC3900 FVP subsystems, divided into three clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for wireless base station applications Four dual-thread e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz Two DDR3/3L controllers for high-speed, industry-standard memory interface each runs at up to 1866.67 MHz MAPLE-B3 hardware acceleration-for forward error correction schemes including Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate acceleration CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. CoreNet fabric interconnect runs at 667 MHz and supports coherent and non-coherent out of order transactions with prioritization and bandwidth allocation amongst CoreNet endpoints. Data Path Acceleration Architecture, which includes the following: Frame Manager (FMan), which supports in-line packet parsing and general classification to enable policing and QoS-based packet distribution Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading of queue management, task management, load distribution, flow ordering, buffer management, and allocation tasks from the cores Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, SSL, and 802.16 RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and outbound). Supports types 5, 6 (outbound only) Large internal cache memory with snooping and stashing capabilities for bandwidth saving and high utilization of processor elements. The 9856-Kbyte internal memory space includes the following: 32 Kbyte L1 ICache per e6500/SC3900 core 32 Kbyte L1 DCache per e6500/SC3900 core 2048 Kbyte unified L2 cache for each SC3900 FVP cluster 2048 Kbyte unified L2 cache for the e6500 cluster Two 512 Kbyte shared L3 CoreNet platform caches (CPC) Sixteen 10-GHz SerDes lanes serving: Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue- less antenna connection Two 10-Gbit Ethernet controllers (10GEC) Six 1G/2.5-Gbit Ethernet controllers for network communications PCI Express controller Debug (Aurora) Two OCeaN DMAs Various system peripherals 182 32-bit timers Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Add T4240 SoCYork Sun2012-10-22-12/+751
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale T4240 SoC. Feature of T4240 are (incomplete list): 12 dual-threaded e6500 cores built on Power Architecture® technology Arranged as clusters of four cores sharing a 2 MB L2 cache. Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet Platform Cache (CPC) Hierarchical interconnect fabric CoreNet fabric supporting coherent and non-coherent transactions with prioritization and bandwidth allocation amongst CoreNet end-points 1.6 Tbps coherent read bandwidth Queue Manager (QMan) fabric supporting packet-level queue management and quality of service scheduling Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Memory prefetch engine (PMan) Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: Packet parsing, classification, and distribution (Frame Manager 1.1) Queue management for scheduling, packet sequencing, and congestion management (Queue Manager 1.1) Hardware buffer management for buffer allocation and de-allocation (BMan 1.1) Cryptography acceleration (SEC 5.0) at up to 40 Gbps RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0) 32 SerDes lanes at up to 10.3125 GHz Ethernet interfaces Up to four 10 Gbps Ethernet MACs Up to sixteen 1 Gbps Ethernet MACs Maximum configuration of 4 x 10 GE + 8 x 1 GE High-speed peripheral interfaces Four PCI Express 2.0/3.0 controllers Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with Type 11 messaging and Type 9 data streaming support Interlaken look-aside interface for serial TCAM connection Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Four I2C controllers Four 2-pin or two 4-pin UARTs Integrated Flash controller supporting NAND and NOR flash Two eight-channel DMA engines Support for hardware virtualization and partitioning enforcement QorIQ Platform's Trust Architecture 1.1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Add T4 device definitionsAndy Fleming2012-10-22-2/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The T4 has added devices to previous corenet implementations: * SEC has 3 more DECO units * New PMAN device * New DCE device This doesn't add full support for the new devices. Just some preliminary support. Move PMAN LIODN to upper half of register Despite having only one LIODN, the PMAN LIODN is stored in the upper half of the register. Re-use the 2-LIODN code and just set the LIODN as if the second one is 0. This results in the actual LIODN being written to the upper half of the register. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | board/freescale/common: VSC3316/VSC3308 initialization codeShaveta Leekha2012-10-22-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add code for configuring VSC3316/3308 crosspoint switches Add README to understand the APIs - VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/corenet2: fix mismatch DDR sync bit from RCWYork Sun2012-10-22-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corenet 2nd generation Chassis doesn't have ddr_sync bit in RCW. Only async mode is supported. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/corenet2: Add SerDes for corenet2York Sun2012-10-22-9/+281
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create new files to handle 2nd generation Chassis as the registers are organized differently. - Add SerDes protocol parsing and detection - Add support of 4 SerDes - Add CPRI protocol in fsl_serdes.h The Common Public Radio Interface (CPRI) is publicly available specification that standardizes the protocol interface between the radio equipment control (REC) and the radio equipment (RE) in wireless basestations. This allows interoperability of equipment from different vendors,and preserves the software investment made by wireless service providers. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | powerpc/mpc85xx: Add RCW bits and registers for SerDes for corenet2York Sun2012-10-22-5/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Corenet 2nd generation Chassis has different RCW and registers for SerDes. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
generated by cgit v1.1 at 2024-11-24 16:56:34 +0000