| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
can't install package.100%
Add API to operate misc partition on nand device.
Delete the API to operate SNVS register in uboot.
Decide to the where to boot(fastboot or bootloader) according bootloader_message.
Signed-off-by: zhang sanshan <b51434@freescale.com>
changes in v2.1 compared with v2.0:
1 memalign a 3 pages size to hold misc info rather than 1M.
Verified OTA and factory reset on sabreauto-6sx nand.
|
|
|
|
|
|
|
| |
Align the fastboot serialno springf format with
kernel boot cmdline, which is "%08x%08x".
Signed-off-by: Winter Wang <wente.wang@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Bootstat in android need info about boot reason.
Read the reset reason and pass it to kernel through bootargs.
Signed-off-by: zhang sanshan <b51434@freescale.com>
Changes in v2:
Delete the kernel_panic bootreason for we do not have a formal way to
record panic reason in kernel.
|
|
|
|
|
|
|
|
| |
Fix build errors
include/configs/mx6qarm2.h:219:34: error: ‘SZ_64K’
include/configs/mx6qarm2.h:9:0: error: unterminated #ifndef
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
|
|
|
|
|
|
|
|
| |
Adjust ahb/axi clock root podf dividers to be divided by 1
to allow ahb/axi clock root to be 24Mhz when sourced
from osc_clk.
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
|
|
|
|
|
|
| |
Add fastboot and recovery mode support for mx6qarm
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
|
|
|
|
|
|
| |
Add Android support for mx6qarm2 lpddr2 pop target
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
|
|
|
|
|
|
|
|
| |
Add video display support for mx6qarm2 target board
Enable lvds and hdmi video displays only for mx6qarm2
lpddr2 pop target platform
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
android_root.img based on NAND boot. 100%
For sparse system.img, USB can trasfer system.img through spliting image into two sparse images.
For android_root.img, the second part will overwrite the first one.
It is a workaround to enlarge CONFIG_USB_FASTBOOT_BUF_SIZE to hold system image whose size is more than 400M.
Signed-off-by: zhang sanshan <b51434@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Table 41 of the JEDEC standard for eMMC says that bit 31 of
the command argument is obsolete when issuing the ERASE
command (CMD38) on page 115 of this document:
http://www.jedec.org/sites/default/files/docs/jesd84-B45.pdf
The SD Card Association Physical Layer Simplified Specification also
makes no mention of the use of bit 31.
https://www.sdcard.org/downloads/pls/part1_410.pdf
The Linux kernel distinguishes between secure (bit 31 set) and
non-secure erase, and this patch copies the macro names from
include/linux/mmc/core.h.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Eric Nelson <eric@nelint.com>
Tested-by: Hector Palacios <hector.palacios@digi.com>
(cherry picked from commit 1aa2d074a7acda61eb43e654ced21c139703633c)
|
|
|
|
|
|
|
|
| |
The uboot binary for auto 6q board may exceed the 512k
The env offset need to be larger thn the uboot binary size
Extend the env offset to 768k for all imx6/7 boards
Signed-off-by: Chen Guoyin <guoyin.chen@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
if the lock/unlock partitions are not created, reboot will fail
with "boota: bad boot image magic".
get_device_and_partition will return negtive value if error,
fix this return value check if there is no lock/unlock related
partitions, or block_write in fastboot_set_lock_stat may destroy
boot partition.
refine code indentation.
Signed-off-by: Winter Wang <wente.wang@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fastboot host end will erase the ext4 partition before
flash them. This is enable into fastboot when it can
get ext4 partition by "getvar partition-type".
Because by default "fastboot erase" will get FAIL
result so the "fastboot flash" process will be end
by the failure.
As "fastboot flash" will overwrite the partition so we
don't need to erase partition. Return OKAY will let
the "fastboot flash" continue.
This patch also refined fastboot lock/unlock codes.
Signed-off-by: Haoran Wang <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support below fastboot getvar commands:
o version-baseband
o version-bootloader
o product
o off-mode-charge
o variant
o battery-voltage
o battery-soc-ok
o partition-size:<partition name>
o partition-type:< partition name>
Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Enable fastboot lock/unlock for Brillo in i.MX6UL
platforms include:
o Pico i.MX6UL
o EVK i.MX6UL 14x14
Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Enable fastboot lock/unlock support for Android in i.MX6
platform include:
o i.MX6QP/Q/DL sabresd
o i.MX6QP/Q/DL sabreauto (non NAND)
o i.MX6SX sabresd
o i.MX6SX sabreauto (nan NAND)
Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Support "fastboot flashing/oem lock/unlock" command.
Support "fastboot getvar secure/unlocked" command.
Protect the lock/unlock status by CAAM-Keyblob.
Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Cherry-pick patch from Renato Frias <b13784@freescale.com>
to enable CAAM in U-Boot.
Modify the CAAM Keyblob to general memory mode.
Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
|
|
|
|
|
|
|
|
| |
LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect
D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3
is actually 1.2V.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Although the ethernet function is not ready for this board, the USB
ethernet is ok, it can use NET utilities like DHCP using USB ethernet.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
|
|
|
|
|
|
| |
Should have "&" to access the register address, otherwise uboot will hang.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
add new NAND config for i.MX6UL 14x14 EVK board, and disable USDHC2 when
NAND enabled due to pin conflict.
Signed-off-by: Han Xu <han.xu@nxp.com>
|
|
|
|
|
|
|
| |
Add revC board support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 1f0bb3940876c9b0be6f3c5fc320dde81ced4d97)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In u-boot, i.MX6QP sabresd board uses 125Mhz ref clock from PHY,
While kernel uses the clock from internal PLL by setting GPR5 bit 9.
When doing warm reset in kernel, the GPR regigster is not reset, so
the clock source still is the PLL. This causes ENET in u-boot can't work.
In this patch, we change the u-boot to use internal PLL to align with
kernel for i.MX6QP. This also fixes the ENET issue after kernel warm reset.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 7f00c72e17e4e440df62aa4945a619fdbc9cfd8f)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Several UART input selects are missing. The fourth input select
for UART2_TX_DATA_ALT0 is actually also missing in the documentation.
(at least in Rev. B of the i.MX 7Dual Reference Manual). However,
when looking at the tables of other input selects, it is very natural
that there must be an input select for the UART2_TX_DATA_ALT0 pad.
The Colibri iMX7 also uses that pad for UART2 RX (in DTE mode), and
it was required to set that particular input select register to get a
working UART2.
From https://www.mail-archive.com/u-boot@lists.denx.de/msg211942.html
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit ee6717667799d70a42f00ba46d96f3f34c78f497)
|
|
|
|
|
|
|
|
|
|
|
|
| |
On i.MX7D lpddr3, retention mode exit flow should restore
more registers to make sure the ddr controller and ddr phy
settings restored properly, otherwise, some of the boards
can NOT pass memtester after retention mode exited.
For LPSR mode, ddr resume flow is same as retention mode,
just adjust it accordingly.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|
|
|
|
|
|
|
|
| |
i.MX7D TO1.2 removes the DDR PADs retention mode setting
in IOMUXC GPR, it is same as TO1.0, so only apply the
IOMUXC GPR setting for TO1.1.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|
|
|
|
|
|
|
| |
i.MX7D VDD_ARM/SOC standby voltage should be 0.95V,
adding 25mV margin, so set it to 0.975V;
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is a porting of
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_4.1.15_1.0.0_ga&id=e4dacc44d22e9474ec456cb330df525cd805ea38
"
i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
bitflip number for erased NAND page. So for these two platform, set the
erase threshold to gf/2 and if bitflip detected, GPMI driver will
correct the data to all 0xFF.
Also updated the imx6qp dts file to ditinguish the GPMI module for i.MX6Q
with the one for i.MX6QP.
"
In this patch, i.MX6UL is added and threshold changed to use ecc_strength.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 489929be0221bb7d4c46bb5bc6083650b78f73e0)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is porting from linux:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_4.1.15_1.0.0_ga&id=3d42fcece496224fde59f9343763fb2dfc5b0768
"
We may meet the bitflips in reading an erased page(contains all 0xFF),
this may causes the UBIFS corrupt, please see the log from Elie:
-----------------------------------------------------------------
[ 3.831323] UBI warning: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read only 16384 bytes, retry
[ 3.845026] UBI warning: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read only 16384 bytes, retry
[ 3.858710] UBI warning: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read only 16384 bytes, retry
[ 3.872408] UBI error: ubi_io_read: error -74 (ECC error) while reading 16384 bytes from PEB 443:245760, read 16384 bytes
...
[ 4.011529] UBIFS error (pid 36): ubifs_recover_leb: corrupt empty space LEB 27:237568, corruption starts at 9815
[ 4.021897] UBIFS error (pid 36): ubifs_scanned_corruption: corruption at LEB 27:247383
[ 4.030000] UBIFS error (pid 36): ubifs_scanned_corruption: first 6569 bytes from LEB 27:247383
-----------------------------------------------------------------
This patch does a check for the uncorrectable failure in the following steps:
[0] set the threshold.
The threshold is set based on the truth:
"A single 0 bit will lead to gf_len(13 or 14) bits 0 after the BCH
do the ECC."
For the sake of safe, we will set the threshold with half the gf_len, and
do not make it bigger the ECC strength.
[1] count the bitflips of the current ECC chunk, assume it is N.
[2] if the (N <= threshold) is true, we continue to read out the page with
ECC disabled. and we count the bitflips again, assume it is N2.
(We read out the whole page, not just a chunk, this makes the check
more strictly, and make the code more simple.)
[3] if the (N2 <= threshold) is true again, we can regard this is a erased
page. This is because a real erased page is full of 0xFF(maybe also has
several bitflips), while a page contains the 0xFF data will definitely
has many bitflips in the ECC parity areas.
[4] if the [3] fails, we can regard this is a page filled with the '0xFF'
data.
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit ceb324a2914487aa517a6c70a06a20b5e3438fda)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The clock parent of the AHB root clock when using mux option 1
is the SYS PLL 270MHz clock. This is specified in Table 5-11
Clock Root Table of the i.MX 7Dual Applications Processor
Reference Manual.
While it could be a documentation error, the 270MHz parent is
also mentioned in the boot ROM configuration in Table 6-28: The
clock is by default at 135MHz due to a POST_PODF value of 1
(=> divider of 2).
Signed-off-by: Stefan Agner <stefan@agner.ch>
(cherry picked from commit 8183b60202754d9d33ac1a2a68a5cc2cc4640fc6)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current environment offset on NAND is 37MB, this will cause a alignment
issue when erasing if nand erase block is 2MB. The saveenv is failed.
=> saveenv
Saving Environment to NAND...
Erasing NAND...
Attempt to erase non block-aligned data
Since the max erase block we supported is 4MB, adjust the env offset to 60MB,
where is the last 4MB in 64MB reserved area for boot.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
For i.MX6QP, the QoS settings is different from others. Align with DCD.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 8a7d61d0731725c6f79488e0089b0b5bd35d028a)
|
|
|
|
|
|
|
| |
Remove the build target mx6ul_14x14_evk_ddr_eol_android_defconfig for the old
ddr which is end of life.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
The build target mx6ul_14x14_evk_android_defconfig is obsoleted.
It is replaced by mx6ul_14x14_evk_brillo_defconfig. So remove this old file.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DDR script file:
arik_r2_sdb_ddr3_528_1.14.inc
Compass link:
http://compass.freescale.net/livelink/livelink?func=ll&objid=235302593&objAction=browse&sort=name&viewType=1
Update:
setmem /32 0x020e0534 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR02 (SDQS0_B_TRIM=01, SDQS0_TRIM=10)
setmem /32 0x020e0538 = 0x00008000 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR03 (SDQS1_B_TRIM=00, SDQS1_TRIM=00)
setmem /32 0x020e053C = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR04 (SDQS2_B_TRIM=01, SDQS2_TRIM=10)
setmem /32 0x020e0540 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR05 (SDQS3_B_TRIM=01, SDQS3_TRIM=10)
setmem /32 0x020e0544 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR06 (SDQS4_B_TRIM=01, SDQS4_TRIM=10)
setmem /32 0x020e0548 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR07 (SDQS5_B_TRIM=01, SDQS5_TRIM=10)
setmem /32 0x020e054C = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR08 (SDQS6_B_TRIM=01, SDQS6_TRIM=10)
setmem /32 0x020e0550 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR09 (SDQS7_B_TRIM=01, SDQS7_TRIM=10)
setmem /32 0x021b08c0 = 0x24912489 // fine tune SDCLK duty cyc to low - seen to improve measured duty cycle of i.mx6
setmem /32 0x021b48c0 = 0x24914452
setmem /32 0x021b0018 = 0x00011740 // MMDC0_MDMISC, RALAT=0x5, WALAT=0x1
Test:
Passed stress memtester on one board.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Default build target supports TO1.0 and TO1.2,
TO1.1 uses its own defconfig.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|
|
|
|
|
|
|
| |
i.MX7D TO1.2 uses same DDR script as TO1.0,
TO1.1 uses dedicated DDR script.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Since the CD pin of SD2 is DNP on the mx6ull arm2 board, this will cause
SD2 access problem even the card is inserted. Hard code the CD result to
1 to assume the card is always on.
The SD driver will return other errors if the card does not exist.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Four build targets added for eMMC, NAND, QSPIA and SPINOR boot.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Bind the macro CONFIG_MX6ULL_DDR3_ARM2_EMMC_REWORK to eMMC 8 bits rework, which
conflicts with QSPIA and NAND, that we have to disable them at same time.
2. Bind the macro CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK to QSPI B port rework, which
conflicts with SD2 and NAND, that we have to disable them at same time.
3. Fix a typo issue of CONFIG_MX6ULL_DDR3_ARM2_EMMC_REWORK
4. Enable QSPI support for default SD boot case.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Fix build error for Plugin
"Can't stat board/freescale/mx6ul_14x14_ddr3_arm2/plugin.bin: Bad file descriptor"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
File:
IMX6ULL_DDR3L_400MHz_1GB_16bit_V2.1.inc
Changes:
Change ZQ_OFFSET to the default value:00
setmem /32 0x021B0890 = 0x00400000
Change IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET.DDR_SEL to 11
setmem /32 0x020E0288 = 0x000C0030
Change duty cycle fine tune cell for SDCLK and SDQS
setmem /32 0x021B08C0 = 0x00944009
Test:
One mx6ull ARM2 board passed memtest.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Adjust POR_B settings on i.MX6ULL according to design
team's suggestion:
2'b00 : always PUP100K
2'b01 : PUP100K when PMIC_ON_REQ || SOC_NOT_FAIL
2'b10 : always disable PUP100K
2'b11 : PDN100K when SOC_FAIL, PUP100K when SOC_NOT_FAIL -- recommended setting
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
|
|
|
|
|
|
|
|
| |
1 Add some APIs to operate BCB/command.
2 Add action to check the command of BCB.
It can cover the case that power down when do factory-reset\ota in recovery mode.
Signed-off-by: zhang sanshan <b51434@freescale.com>
|
|
|
|
|
|
|
| |
MXC_CCM_CCGR3_LDB_DI0_OFFSET should not be disabled for i.MX6SX.
Otherwise met compile error. And Discard the if else.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support mx6ull ddr3 arm2 board.
DDR script version 1.1. Passed memtester on 3 boards.
Take mx6ul 14x14 ddr3 arm2 as reference.
Note:
LCD/NAND/ECSPI not tested, need hardware rework.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
| |
Since the mx6ull adds the AIPS3, so enable its initialization.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Update memory map address for mx6ull which uses AIPS3 and adjust UART8
to AIPS3 by replacing for ESAI.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Update CCM registers and clock settings according the mx6ull changes
Signed-off-by: Ye Li <ye.li@nxp.com>
|