summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* MUSB driver: Timeout is never detected as the while loop does not endMatej Frančeškin2012-09-01-1/+1
| | | | | | | | | | | | | | | | | Timeout variable is decremented once more when while condition is not met. Following "if" does not detect correctly that timeout has occurred. Because of this bug the "usb start" command on AM335X-EVM board did not detect correctly that USB device was not attached. timeout = musb_cfg.timeout; while (timeout--) if (readb(&musbr->devctl) & MUSB_DEVCTL_HM) break; /* if musb core is not in host mode, then return */ if (!timeout) return -1; Signed-off-by: Matej Franceskin <Matej.Franceskin@comtrade.com> CC: Marek Vasut <matex@denx.de>?
* usb: fix ulpi_set_vbus prototypeLucas Stach2012-09-01-1/+1
| | | | | | | Match the name of the header prototype with the actual implementation. Signed-off-by: Lucas Stach <dev@lynxeye.de>
* pxa25x: Add UDC registers definitionsŁukasz Dałek2012-09-01-0/+159
| | | | Signed-off-by: Łukasz Dałek <luk0104@gmail.com>
* USB: Fix strict aliasing in ohci-hcdTroy Kisky2012-09-01-39/+31
| | | | | | | | | | | | | | | | | | | | commit 5f6aa03fda2a0a79940765865c1e4266be8a75f8 USB: Fix complaints about strict aliasing in OHCI-HCD tried to fix this, but gcc4.4 still complains. So, this patch basically reverts the above and does a simpler fix. also, the above commit incorrectly changed /* corresponds to data_buf[4-7] */ datab [1] = 0; to /* corresponds to databuf.u8[4-7] */ databuf.u8[1] = 0; This patch also fixes that. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* usb: Optimize USB storage read/writeJim Shimer2012-09-01-12/+0
| | | | | | | Trim down the IO times by removing uneeded test unit reeady calls. Signed-off-by: Jim Shimer <mgi2475@motorola.com>
* ehci: Optimize qTD allocationsBenoît Thébaudeau2012-09-01-30/+37
| | | | | | | | | | Relax the qTD transfer alignment constraints in order to need less qTDs for buffers that are aligned to 512 bytes but not to pages. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* usb_stor_BBB_transport: Do not delay when not requiredBenoît Thébaudeau2012-09-01-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | There is a 5-ms delay in usb_stor_BBB_transport, which occurs every 10 kiB of data for fragmented fatload usb, i.e. roughly 500 ms of delay per MiB. This adds up to quite a bit of delay if you're loading a large ramdisk. The purpose of this delay should be to debounce the 5-V/100-mA USB power up. This patch skips the delay if the device has already been queried as ready. Signed-off-by: Jim Shimer <mgi2475@motorola.com> Rework following the review: - Rebase against the latest u-boot-usb master. - Replace typedef with #define. - Use the existing flags struct field instead of adding a new field. - Remove the setter function. - Remove the typecasts. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> Cc: Jim Shimer <mgi2475@motorola.com>
* usb_storage: Remove EHCI constraintsBenoît Thébaudeau2012-09-01-18/+15
| | | | | | | | | | Now that the EHCI driver allocates its qTDs from the heap, the MSC driver is only limited by the SCSI commands it uses. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* usb_storage: Restore non-EHCI supportBenoît Thébaudeau2012-09-01-0/+4
| | | | | | | | | | | | | The commit 5dd95cf made the MSC driver EHCI-specific. This patch restores a basic support of non-EHCI HCDs, like before that commit. The fallback transfer size is certainly not optimal, but at least it should work like before. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* ehci-hcd: Boost transfer speedBenoît Thébaudeau2012-09-01-29/+138
| | | | | | | | | | | | | | | | | | | This patch takes advantage of the hardware EHCI qTD queuing mechanism to avoid software and transfer splitting overhead so as to make transfers as fast as possible. The only drawback is a call to memalign. However, this is fast compared to the transfer timings, and the heap size to allocate is small, e.g. 128 kiB in the worst case for a transfer length of 65535 packets of 512 bytes. Tested on i.MX25, i.MX35 and i.MX51. In my test conditions, the speed gain was very significant (several times faster), which is really appreciable when accessing large files. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* ehci: cosmetic: Define used constantsBenoît Thébaudeau2012-09-01-69/+118
| | | | | | | | | Make some light cosmetic code cleanup by the way. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* ehci: Fail for multi-transaction interrupt transfersBenoît Thébaudeau2012-09-01-1/+10
| | | | | | | | | | | Interrupt transfers requiring several transactions are not supported by submit_int_msg() because bInterval is ignored. This patch returns a failure code and prints an error message in this case. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATSLukasz Majewski2012-09-01-1/+23
| | | | | | | | | | | Enable the g_dnl composite USB gadget driver with embedded DFU function on it. It now uses the composite gadget framework to support download specific USB functions (like enabled DFU or USB Mass Storage). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com>
* arm:trats: Support for USB UDC driver at TRATS board.Lukasz Majewski2012-09-01-0/+8
| | | | | | | | | Support for USB UDC driver at trats board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de> Cc: Minkyu Kang <mk7.kang@samsung.com>
* dfu:cmd: Support for DFU u-boot commandLukasz Majewski2012-09-01-0/+82
| | | | | | | | Support for u-boot's command line command "dfu <interface> <dev> [list]". Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: MMC specific routines for DFU operationLukasz Majewski2012-09-01-0/+163
| | | | | | | | Support for MMC storage devices to work with DFU framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu: DFU backend implementationLukasz Majewski2012-09-01-0/+385
| | | | | | | | | | New, separate driver at ./drivers/dfu has been added. It allows platform and storage independent operation of DFU. It has been extended to use new MMC level of command abstraction. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadgetLukasz Majewski2012-09-01-0/+850
| | | | | | | | Support for f_dfu USB function. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* dfu:usb: Support for g_dnl composite download gadget.Lukasz Majewski2012-09-01-0/+236
| | | | | | | | | Composite USB download gadget support (g_dnl) for download functions. This code works on top of composite gadget. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* ehci: cosmetic: Define the number of qt_buffersBenoît Thébaudeau2012-09-01-7/+8
| | | | | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Marek Vasut <marex@denx.de> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
* CREDITS: Add credits for MCF5249 initialization codeJeremy Andrus2012-09-01-0/+5
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Consolidate bootcount code into drivers/bootcountStefan Roese2012-09-01-207/+282
| | | | | | | | | | | | | | | | | | | This patch moves all bootcount implementations into a common directory: drivers/bootcount. The generic bootcount driver is now usable not only by powerpc platforms, but others as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de> Tested-by: Valentin Longchamp <valentin.longchamp@keymile.com> Tested-by: Christian Riesch <christian.riesch@omicron.at> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* mpc52xx: remove o2dnt boardAnatolij Gustschin2012-09-01-1119/+0
| | | | | | | Remove old o2dnt board without OF support. New support for this board is added by the previous patch, O2I configuration. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* mpc52xx: add common o2dnt and o2dnt2 support and configurationsAnatolij Gustschin2012-09-01-0/+1287
| | | | | | | | Add common code for o2dnt and o2dnt2 based boards and add different board configuration files for O2D, O2I, O2DNT2, O2D300, O2MNT and O3DNT boards. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* mpc5xxx: add GPIO port configurationAnatolij Gustschin2012-09-01-0/+14
| | | | | | | Add posibility for board specifig GPIO configurations using various CONFIG_SYS_ macros. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* mpc5xxx: add pci_mpc5xxx_init prototype to common headerAnatolij Gustschin2012-09-01-0/+3
| | | | | | | Add pci_mpc5xxx_init() prototype to the header file, so board .c files do not need to add extern pci_mpc5xxx_init() declaration. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2012-09-01-210/+117
|\ | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-sh: sh: tmu: Removed arch/sh/include/asm/clk.h sh: tmu: Changed switch statement to shift operation sh: tmu: Changed TMU driver using array of structures Signed-off-by: Wolfgang Denk <wd@denx.de>
| * sh: tmu: Removed arch/sh/include/asm/clk.hNobuhiro Iwamatsu2012-08-21-31/+0
| | | | | | | | | | | | | | | | | | asm/clk.h was included get_peripheral_clk_rate function. But this is not used from anywhere. This removed asm/clk.h, and deleted include line from arch/sh/lib/time.c Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: tmu: Changed switch statement to shift operationNobuhiro Iwamatsu2012-08-21-30/+18
| | | | | | | | | | | | | | | | | | Calculation of the bit position using switch statement can substitute shift operation using ffs. And removed unsed macro and variable. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: tmu: Changed TMU driver using array of structuresNobuhiro Iwamatsu2012-08-21-151/+101
| | | | | | | | | | | | | | | | | | This changed into access using array of structure from access to the register using the definition of the register by macro. And removed white space. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch 'sf' of git://git.denx.de/u-boot-blackfinWolfgang Denk2012-09-01-14/+41
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | * 'sf' of git://git.denx.de/u-boot-blackfin: sf: spansion: Add support for S25FL256S sf: winbond: fix page_size sf: stmicro: add support for N25Q128A sf: stmicro: add support N25Q128 parts sf: stmicro: support JEDEC standard two-byte signature sf: winbond: add W25Q32 cmd_spi: remove superfluous semicolon Signed-off-by: Wolfgang Denk <wd@denx.de>
| * sf: spansion: Add support for S25FL256SMichal Simek2012-08-14-0/+7
| | | | | | | | | | | | | | Add support for Spansion S25FL256S SPI flash. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: winbond: fix page_sizeStephen Warren2012-08-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | Commit a4ed3b6 "sf: inline data constants" modified winbond.c's page_size from 256 to 4096. This prevents either/both of "sf write" writing the correct data, or "sf read" from reading the correct data back. This allows U-Boot running on Compulab Tegra to upgrade itself. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: add support for N25Q128AMichal Simek2012-08-10-0/+6
| | | | | | | | | | | | | | Add support for Numonyx N25Q128A SPI flash. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: add support N25Q128 partsStephan Linz2012-08-09-0/+6
| | | | | | | | | | | | | | | | | | Adds support for Numonyx's N25Q128 SPI flash. These devices are used on (among others) Avnet Spartan-6 LX9 micro-evaluation boards. Tested with "sf" commands and CONFIG_ENV_IS_IN_SPI_FLASH. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: stmicro: support JEDEC standard two-byte signatureStephan Linz2012-08-09-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are more than the M25Pxx serial flashs that can be used with the stmicro driver, for example: the M25PXxx or N25Qxx serie. All these chips have burned in the original stmicro manufacture id 0x20 together with a standard two-byte signature. In preperation to support all these chips the stmicro driver have to decode the full two-byte signature. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * sf: winbond: add W25Q32Rajeshwari Shinde2012-08-09-0/+5
| | | | | | | | | | | | | | | | | | SMDK EVT1 has a different Winbond part, added its part details to the SPI flash table. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * cmd_spi: remove superfluous semicolonMarek Vasut2012-08-09-1/+1
| | | | | | | | | | | | Reported-by: James Miller <jamesmiller@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Makefile: fix HAVE_VENDOR_COMMON_LIBScott Wood2012-08-17-2/+2
| | | | | | | | | | | | | | | | | | | | | | Commit 8b5a02640adf77301f943e8754992c50df004e8a ("Makefile: cosmetic: optimize usage of LIBS-y") broke the build of boards that have a board vendor "common" directory, by introducing a space between "LIBS-" and "y". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* | mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashsHolger Brunck2012-08-13-22/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break other flashes which don't need this work around. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Stefan Roese <sr@denx.de> cc: Philippe De Muyter <phdm@macqel.be> cc: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | cfi_flash: add support for Spansion flash PPB sector protectionAnatolij Gustschin2012-08-13-0/+59
| | | | | | | | | | | | | | | | | | | | Erasing flash sectors protected with persistent protection bit (PPB) mechanism on Spansion flash chips doesn't work. Add sector protection status checking and sector lock and unlock commands to fix this. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | dts/Makefile: Turn off some predefined macrosHorst Kronstorfer2012-08-10-1/+2
| | | | | | | | | | | | | | | | | | | | | | Add '-ansi' to DTS_CPPFLAGS to avoid unwanted expansion of dts content that matches some predefined macros. Example: A number of PowerPC related *.dts files in the kernel define a property named 'linux,network-index' which (w/o '-ansi') is expanded to '1,network-index' by the preprocessor because of '#define linux 1.' Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
* | Add support for DS1388.Kenth Eriksson2012-08-10-0/+27
| | | | | | | | | | | | | | | | | | | | Support for DS1388 is added by extending the DS1337 driver. DS1388 is similar to DS1337. The time registers are offset by 1 (due to support for hundreds of seconds), and there is no century bit. The configuration and trickle charge registers are also different. Tested on hardware with Freescale P2010 and DS1388. Signed-off-by: Kenth Eriksson <kenth.eriksson@transmode.com>
* | dts/Makefile: Check for empty $(LDSCRIPT)Horst Kronstorfer2012-08-10-2/+3
| | | | | | | | | | | | | | | | Make sure that $(LDSCRIPT) is not empty before calling process_lds with 'cat $(LDSCRIPT)' else cat will block waiting for input from stdin. Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com>
* | Makefile: cosmetic: optimize usage of LIBS-yDaniel Schwierzeck2012-08-10-13/+7
| | | | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | Makefile: replace LIBS by LIBS-yDaniel Schwierzeck2012-08-10-68/+68
| | | | | | | | | | | | | | Synchronize with ALL-y handling and code in spl/Makefile. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | Makefile: allow appending to LIB in sub-makefilesDaniel Schwierzeck2012-08-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The top Makefile and the SPL Makefile have lines like those: ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) LIBS += $(CPUDIR)/omap-common/libomap-common.o endif ifeq ($(SOC),mx5) LIBS += $(CPUDIR)/imx-common/libimx-common.o endif This should be done in the arch/CPU/SoC specific sub-makefiles to keep the top Makefiles clean. This patch also allows adding of new arch/CPU/SoC specific libraries in the future without touching the top Makefiles. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | nds32: fix unused pmu_init warningMike Frysinger2012-08-11-0/+2
| | | | | | | | | | | | | | | | | | | | | | Fixes the build-time warning: board.c: At top level: board.c:106: warning: 'pmu_init' defined but not used This makes the ifdef logic at the call site match the logic at the function definition. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | nds32: delete unused local variableMike Frysinger2012-08-11-1/+0
| | | | | | | | | | | | | | | | Fixes the build-time warning: board.c: In function 'board_init_r': board.c:304: warning: unused variable 's' Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | nds32: drop bi_enetaddr from global dataMike Frysinger2012-08-11-1/+0
|/ | | | | | | Nothing is using this, so punt it from the gd. Seems to just be a copy & paste wart from the initial port. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-12-10 22:26:05 +0000