summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* arm: mxs: Add MXS LCDIF driverMarek Vasut2013-05-06-0/+194
| | | | | | | | | | | | Add basic LCD driver for i.MX233 and i.MX28. This driver allows framebuffer console and framebuffer logo. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* arm: mxs: Add LCDIF registers for i.MX233Marek Vasut2013-05-06-9/+27
| | | | | | | | | Extend the regs-lcdif.h with registers for i.MX233. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* arm: mxs: Add LCDIF clock configuration functionMarek Vasut2013-05-06-0/+94
| | | | | | | | | | | This function turns on the LCDIF clock and configures it's frequency. The dividers settings are calculated within the function and the current implementation should be fast and accurate. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx35pdk: Fix MUX2_CTR GPIOBenoît Thébaudeau2013-05-06-1/+1
| | | | | | | MUX2_CTR is on GPIO1[5], not GPIO2[5], and it needs to be set high in order to connect the FEC. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* arm: mxs: Preprocess u-boot.bd so they contain full pathMarek Vasut2013-05-06-9/+17
| | | | | | | | | | | | | | | | The u-boot-imx23.bd and u-boot-imx28.bd need to be preprocessed, otherwise they have issues with out-of-tree build where elftosb tool couldn't sometimes find the u-boot.bin and spl/u-boot-spl.bin . Preprocess these .bd files with sed and insert full path to u-boot.bin and spl/u-boot-spl.bin to prevent this issue. Moreover, to avoid adding more churn into main Makefile, move all this preprocessing and u-boot.sb generation into CPU directory instead. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* arm: mx23: Fix VDDMEM misconfigurationMarek Vasut2013-05-06-20/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | The VDDMEM ramped up in very weird way as it was horribly misconfigured. Instead of setting up VDDMEM in one swipe, let it rise slowly the same way as VDDD and VDDA in spl_power_init.c and then only clear ILIMIT before memory gets inited. This makes sure the VDDMEM rises sanely, not jumps up and down as it did till now. The VDDMEM prior to this change did this: 2V0____ .--------2V5 | `--' 0V____| The VDDMEM now does this: 2V0_____,-----------2V5 / 0V__| Moreover, VDDIO on MX23 uses 25mV steps while MX28 uses 50mV steps, fix this difference too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* mxs: Explain why some mx23 DDR registers are not configuredFabio Estevam2013-05-06-0/+9
| | | | | | | Put an explanation in the source code as to why some DDR registers do not need to be configured. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx23_olinuxino: Do not set voltage selection bit for SSP padsFabio Estevam2013-05-06-1/+1
| | | | | | mx23 SSP pad registers do not contain voltage selection bit, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx23evk: Do not set voltage selection bit for SSP padsFabio Estevam2013-05-06-1/+1
| | | | | | mx23 SSP pad registers do not contain voltage selection bit, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx23: Operate DDR voltage supply at 2.5VFabio Estevam2013-05-06-2/+2
| | | | | | | After the recent fixes in the mx23 DDR setup, it is safe to operate DDR voltage at the recommended 2.5V voltage level again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx: mx5: Remove legacy iomux supportBenoît Thébaudeau2013-05-05-1236/+1
| | | | | | | | Legacy iomux support is no longer needed now that all boards have been converted to iomux-v3. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Reviewed-by: Marek Vasut <marex@denx.de>
* imx: m53evk: Convert to iomux-v3Benoît Thébaudeau2013-05-05-200/+120
| | | | | | | | | There is no change of behavior, except for the folloing line that has been removed because the iomux mode was not set accordingly and the pad used for OTG OC is not this one: mxc_iomux_set_input(MX53_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT, 1); Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx53smd: Convert to iomux-v3Benoît Thébaudeau2013-05-05-104/+48
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx53loco: Convert to iomux-v3Benoît Thébaudeau2013-05-05-223/+113
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx53evk: Convert to iomux-v3Benoît Thébaudeau2013-05-05-206/+83
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx53ard: Convert to iomux-v3Benoît Thébaudeau2013-05-05-186/+141
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: ima3-mx53: Convert to iomux-v3Benoît Thébaudeau2013-05-05-158/+73
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: iomux-v3: Add iomux-mx53.hBenoît Thébaudeau2013-05-05-0/+1232
| | | | | | | | Allow usage of the imx-common/iomux-v3.h framework by including pad settings for the i.MX53. The content of the file is taken from Freescale's Linux kernel at commit 4ab3715, plus the required changes to make it work in U-Boot. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: vision2: Convert to iomux-v3Benoît Thébaudeau2013-05-05-362/+223
| | | | | | | There is no change of behavior, except for older silicon revisions for which support is removed. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx51_efikamx/sb: Convert to iomux-v3Benoît Thébaudeau2013-05-05-53/+69
| | | | | | | | There is no change of behavior, except for older silicon revisions for which support is removed. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Tested-by: Matt Sealey <matt@genesi-usa.com>
* imx: mx51evk: Convert to iomux-v3Benoît Thébaudeau2013-05-05-239/+131
| | | | | | | There is no change of behavior, except for older silicon revisions for which support is removed. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: iomux-v3: Add missing definitions to iomux-mx51.hBenoît Thébaudeau2013-05-05-27/+124
| | | | | | | | Add missing definitions that are required by future changes. By the way, make some cosmetic cleanup. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: iomux-mx51: Fix MX51_PAD_EIM_CS2__GPIO2_27Benoît Thébaudeau2013-05-05-2/+2
| | | | | | | In ALT1 mode, EIM_CS2 is GPIO2[27], not ESDHC1.CD. Hence, rename MX51_PAD_EIM_CS2__SD1_CD to MX51_PAD_EIM_CS2__GPIO2_27. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx35: Remove legacy iomux supportBenoît Thébaudeau2013-05-05-764/+0
| | | | | | | Legacy iomux support is no longer needed now that all boards have been converted to iomux-v3. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: woodburn: Convert to iomux-v3Benoît Thébaudeau2013-05-05-32/+37
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx35pdk: Convert to iomux-v3Benoît Thébaudeau2013-05-05-99/+74
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx35pdk: Fix WDOG_RST iomux functionBenoît Thébaudeau2013-05-05-1/+1
| | | | | | | The signal connected from this pin to the PMIC is WDOG_B, i.e. ALT0 mode, not ALT1 (which even corresponds to nothing). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: flea3: Convert to iomux-v3Benoît Thébaudeau2013-05-05-43/+48
| | | | | | There is no change of behavior. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: iomux-v3: Add iomux-mx35.hBenoît Thébaudeau2013-05-05-2/+1278
| | | | | | | | Allow usage of the imx-common/iomux-v3.h framework by including pad settings for the i.MX35. The content of the file is taken from Linux kernel at commit 267dd34, plus the required changes to make it work in U-Boot. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx25: Remove legacy iomux supportBenoît Thébaudeau2013-05-05-570/+0
| | | | | | | Legacy iomux support is no longer needed now that all boards have been converted to iomux-v3. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: zmx25: Convert to iomux-v3Benoît Thébaudeau2013-05-05-71/+72
| | | | | | | There is no change of behavior, even if some pad control values could probably be simplified. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: tx25: Convert to iomux-v3Benoît Thébaudeau2013-05-05-39/+68
| | | | | | | There is no change of behavior, even if some pad control values could probably be simplified. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx25pdk: Fix GPIO assignmentsBenoît Thébaudeau2013-05-05-2/+2
| | | | Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: mx25pdk: Convert to iomux-v3Benoît Thébaudeau2013-05-05-53/+75
| | | | | | | There is no change of behavior, even if some pad control values could probably be simplified. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* imx: iomux-v3: Add iomux-mx25.hBenoît Thébaudeau2013-05-05-1/+550
| | | | | | | | Allow usage of the imx-common/iomux-v3.h framework by including pad settings for the i.MX25. The content of the file is taken from Linux kernel at commit 267dd34, plus the required changes to make it work in U-Boot. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* arm: mx5: Add support for DENX M53EVKMarek Vasut2013-05-05-0/+814
| | | | | | | | | | | | | | | | Add basic support for the DENX M53EVK board. Currently supported is: MMC (incl. booting) NAND (incl. booting) Ethernet, I2C, USB, SATA, RTC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de>
* arm: mx5: Add NAND clock handlingMarek Vasut2013-05-05-2/+13
| | | | | | | | | | | | | Augment the MX5 clock code with function to enable and configure NFC clock. This is necessary to get NFC working on MX5. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
* arm: mx5: Add SPL support code to MX5Marek Vasut2013-05-05-0/+23
| | | | | | | | | | | | Fix minor adjustments needed to get SPL framework building on MX5. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
* arm: imx: Pack u-boot.bin into uImage for SPLMarek Vasut2013-05-05-4/+10
| | | | | | | | | | | | | | | The U-Boot SPL can parse the uImage format and gather information from it about the payload. Make use of this and wrap u-boot.bin into uImage format. The benefit is the SPL will know the size of the payload instead of using fixed size of the payload defined at compile time. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
* nand: Add SPL_NAND support to mxc_nand_splMarek Vasut2013-05-05-3/+10
| | | | | | | | | | | | | | | | | | | | Add support for generic NAND SPL via the SPL framework into the mxc_nand_spl driver. This is basically just a simple rename and publication of the already implemented functions. To avoid the bare-bones functions getting in the way of the NAND_SPL, build them only if CONFIG_SPL_FRAMEWORK is not defined. Also make sure the requested payload is aligned to full pages, otherwise this simple driver fails to load the last page. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Scott Wood <scottwood@freescale.com>
* imx: Align the imximage header and payload to multiples of 4kMarek Vasut2013-05-05-5/+9
| | | | | | | | | | | | | | The MX53 ROM loads the data from NAND in multiples of pages and supports maximum page size of 4k. Thus, align the image and header to 4k to be safe from ROM bugs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
* mxs: spl_mem_init: Change EMI port priorityFabio Estevam2013-05-05-1/+1
| | | | | | | | | FSL bootlets code set the PORT_PRIORITY_ORDER field of register HW_EMI_CTRL as 0x2, which means: PORT0231 = 0x02 Priority Order: AXI0, AHB2, AHB3, AHB1 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mxs: spl_mem_init: Skip the initialization of some DRAM_CTL registersFabio Estevam2013-05-05-2/+15
| | | | | | | | | | | | | HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as per FSL bootlets code. mx23 Reference Manual mark HW_DRAM_CTL27 and HW_DRAM_CTL28 as "reserved". HW_DRAM_CTL8 is setup as the last element. So skip the initialization of these DRAM_CTL registers. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mxs: spl_mem_init: Remove erroneous DDR settingFabio Estevam2013-05-05-4/+0
| | | | | | | | On mx23 there is no 'DRAM init complete' in register HW_DRAM_CTL18. Remove this erroneous setting. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mxs: spl_mem_init: Fix comment about start bitFabio Estevam2013-05-05-1/+1
| | | | | | Start bit is part of HW_DRAM_CTL8 register, so fix the comment. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx23_olinuxino: Fix DDR pin iomux settingsFabio Estevam2013-05-05-1/+1
| | | | | | | Change MUX_CONFIG_EMI to use the same drive strength as the bootlets code from Freescale, which results in much better stability. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx23evk: Fix DDR pin iomux settingsFabio Estevam2013-05-05-1/+1
| | | | | | | Change MUX_CONFIG_EMI to use the same drive strength as the bootlets code from Freescale, which results in much better stability. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx23: Fix pad voltage selection bitFabio Estevam2013-05-05-0/+4
| | | | | | | | | | | | | | | | On mx23 the pad voltage selection bit needs to be always '0', since '1' is a reserved value. For example: Pin 108, EMI_A06 pin voltage selection: 0= 1.8V (mDDR) or 2.5V (DDR1); 1= reserved. Fix the pad voltage definitions for the mx23 case. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* tools: arm: imx: Implement BOOT_OFFSET command for imximageMarek Vasut2013-04-28-0/+60
| | | | | | | | | | | | | | | | | | | | Implement BOOT_OFFSET command for imximage. This command is parallel to current BOOT_FROM command, but allows more flexibility in configuring arbitrary image header offset. Also add an imximage.cfg with default offset values into arm/arch/imx-common/ so the board-specific imximage.cfg can include this file to avoid magic constants. The syntax of BOOT_OFFSET command is "BOOT_OFFSET <u32 offset>". Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* imx: iomux-v3: Include PKE and PUE to pad control pull definitionsBenoît Thébaudeau2013-04-28-110/+82
| | | | | | | | | | | | | | | | | PUE requires PKE to mean something, as do pull values with PUE, so do not compell users to explicitly use PKE and PUE everywhere. This is also what is done on Linux and what has already been done for i.MX51. By the way, remove some unused pad control definitions. There is no change of behavior. Note that SPI_PAD_CTRL was defined by several boards with a pull value, but without PKE or PUE, which means that no pull was actually enabled in the pad. This might be a bug in those boards, but this patch does not change the behavior, so it just removes the meaningless pull value from those definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
generated by cgit v1.1 at 2024-12-17 16:13:15 +0000