summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ARM: omap: fix GPMC address-map size for NAND and NOR devicespekon gupta2014-07-25-2/+8
| | | | | | | | | | | | | | | | | | | | | | Fixes commit a0a37183bd75e74608bc78c8d0e2a34454f95a91 ARM: omap: merge GPMC initialization code for all platform 1) NAND device are not directly memory-mapped to CPU address-space, they are indirectly accessed via following GPMC registers: - GPMC_NAND_COMMAND_x - GPMC_NAND_ADDRESS_x - GPMC_NAND_DATA_x Therefore from CPU's point of view, NAND address-map can be limited to just above register addresses. But GPMC chip-select address-map can be configured in granularity of 16MB only. So this patch uses GPMC_SIZE_16M for all NAND devices. 2) NOR device are directly memory-mapped to CPU address-space, so its address-map size depends on actual addressable region in NOR FLASH device. So this patch uses CONFIG_SYS_FLASH_SIZE to derive GPMC chip-select address-map size configuration. Signed-off-by: Pekon Gupta <pekon@ti.com>
* ARM: OMAP: Fix handling of errata i727Rajendra Nayak2014-07-25-1/+10
| | | | | | | | | | | | The errata is applicable on all OMAP4 (4430 and 4460/4470) and OMAP5 ES 1.0 devices. The current revision check erroneously implements this on all DRA7 varients and with DRA722 device (which has only 1 EMIF instance) infact causes an asynchronous abort and ends up masking it in CPSR, only to be uncovered once the kernel switches to userspace. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* board: k2e-evm: add board supportHao Zhang2014-07-25-0/+178
| | | | | | | This patch adds Keystone2 k2e_evm evaluation board support. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone2: spl: add K2E SoC supportKhoronzhuk, Ivan2014-07-25-0/+8
| | | | | | | | Keystone2 K2E SoC has slightly different spl pll settings then K2HK, so correct this. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* keystone2: use CONFIG_SOC_KEYSTONE in common placesKhoronzhuk, Ivan2014-07-25-3/+3
| | | | | | | | Use CONFIG_SOC_KEYSTONE in common places instead of defining a lot of "if def .. || if def " for different Keystone2 SoC types. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone2: add MSMC cache coherency support for K2E SOCHao Zhang2014-07-25-8/+26
| | | | | | | | | | This patch adds Keystone2 K2E SOC specific code to support MSMC cache coherency. Also create header file for msmc to hold its API. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone2: clock: add K2E clock supportHao Zhang2014-07-25-6/+203
| | | | | | | | This patch adds clock definitions and commands to support Keystone2 K2E SOC. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone2: add K2E SoC hardware definitionsHao Zhang2014-07-25-44/+105
| | | | | | | | | | | This patch adds hardware definitions specific to Keystone II K2E device. It has a lot common definitions with k2hk SoC, so move them to common hardware.h. This is preparation patch for adding K2E SoC support. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* keystone: ddr3: move K2HK DDR3 configuration to a common fileHao Zhang2014-07-25-285/+172
| | | | | | | | | | | It's convenient to hold configurations for DDR3 PHY and EMIF in separate common place. This patch moves K2HK DDR3 PHY and EMIF configuration data with different rates and memory size to a common ddr3_cfg.c file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* configs: k2hk_evm: config: add common EVM configuration headerHao Zhang2014-07-25-244/+289
| | | | | | | | | | | This patch adds a common config header file for all the Keystone II EVM platforms. It combines a lot of general definitions in one file. The common header included in the EVM should be specific configuration header. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone: clock: move K2HK SoC dependent code in separate fileKhoronzhuk, Ivan2014-07-25-145/+166
| | | | | | | | | | This patch in general spit SoC type clock dependent code and general clock code. Before adding keystone II Edison k2e SoC which has slightly different dpll set, move k2hk dependent clock code to separate clock-k2hk.c file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone2: move K2HK board files to common KS2 board directoryHao Zhang2014-07-25-103/+142
| | | | | | | | | | This patch moves K2HK board directory to a common Keystone II board directory. The Board related common functions are moved to a common keystone board file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* keystone2: add env option to do unitrd dt fixupMurali Karicheri2014-07-25-1/+5
| | | | | | | | | | With latest v3.13 kernel, unitrd dt fixup is not needed. However for older kernel versions such as v3.8/v3.10, it is needed. So to work with both, add a u-boot env variable that can be set to do dt fixup for older kernels. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* k2hk: use common KS2_ prefix for all hardware definitionsKhoronzhuk, Ivan2014-07-25-148/+138
| | | | | | | | | | | | | | | | Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and add KS2_ prefix where it's needed. It requires to change names also in places where they're used. Align lines and remove redundant definitions in kardware-k2hk.h at the same time. Using common KS2_ prefix helps resolve redundant redefinitions and adds opportunity to use KS2_ definition across a project not thinking about what SoC should be used. It's more convenient and we don't need to worry about the SoC type in common files, hardware.h will think about that. The hardware.h decides definitions of what SoC to use. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* keystone2: add possibility to turn off all dspsHao Zhang2014-07-25-2/+83
| | | | | | | | | | By default all DSPs are turned off, for another case option to turn off them is added in this commit. Also add command to turn off itself. Acked-by: Murali Karicheri <m-maricheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* keystone2: move cpu_to_bus() to keystone.cHao Zhang2014-07-25-14/+29
| | | | | | | | | The SoC related common functions in board.c should be placed to a common keystone.c arch file. Acked-by: Murali Karicheri <m-maricheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone2: keystone_nav: make it dependent on keystone driverKhoronzhuk, Ivan2014-07-25-1/+1
| | | | | | | | | | | This driver is needed in case if keystone driver is used. Currently only keystone_net driver uses it. So to avoid redundant code compilation make the keystone_nav dependent on keystone net driver. It also leads to compilation errors for boards that does't use it. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* keystone2: ddr: add DDR3 PHY configs updated for PG 2.0Hao Zhang2014-07-25-2/+100
| | | | | | | | | Add DDR3 PHY configs updated for PG 2.0 Also add DDR3A PHY reset before init for PG2.0 SoCs. Acked-by: Murali Karicheri <m-maricheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* keystone: ddr3: add ddr3.h to hold ddr3 APIKhoronzhuk, Ivan2014-07-25-54/+76
| | | | | | | | It's convinient to hold ddr3 function definitions in separate file such as ddr3.h. So move this from hardware.h to ddr3.h. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: keystone2: psc: use common PSC baseKhoronzhuk, Ivan2014-07-25-24/+22
| | | | | | | | Use common keystone2 Power Sleep controller base address instead of directly deciding which keystone2 SoC is used in psc module. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* ARM: omap: tao3530: Convert to generic boardStefan Roese2014-07-25-0/+1
| | | | | | | | Use generic board setup functions by defining CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com>
* ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.cStefan Roese2014-07-25-139/+0
| | | | | | | | | | | | These functions have been merged into the common GPMC init code with this commit a0a37183 (ARM: omap: merge GPMC initialization code for all platform). The file is not compiled any more. So remove it as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pekon Gupta <pekon@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Pekon Gupta <pekon@ti.com>
* ARM: omap: Fix GPMC init for OMAP3 platformsStefan Roese2014-07-25-1/+1
| | | | | | | | | | | | | | | | | | | Commit a0a37183 (ARM: omap: merge GPMC initialization code for all platform) broke NAND on OMAP3 based platforms. I noticed this while testing the latest 2014.07-rc version on the TAO3530 board. NAND detection did not work with this error message: NAND: nand: error: Unable to find NAND settings in GPMC Configuration - quitting As OMAP3 configs don't set CONFIG_NAND but CONFIG_NAND_CMD. the GPMC was not initialized for NAND at all. This patch now fixes this issue. Tested on TAO3530 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Pekon Gupta <pekon@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Pekon Gupta <pekon@ti.com>
* tricorder: convert to generic boardAndreas Bießmann2014-07-25-0/+2
| | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Thomas Weber <thomas.weber@corscience.de>
* am335x_evm / gumstix pepper: Correct DDR settingsTom Rini2014-07-25-58/+6
| | | | | | | | | | | | | | As noted by clang, we have been shifting certain values out of 32bit range when setting some DDR registers. Upon further inspection these had been touching reserved fields (and having no impact). These came in from historical bring-up code and can be discarded. Similarly, we had been declaring some fields as 0 when they will be initialized that way. Tested on Beaglebone White. Reported-by: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Ash Charles <ash@gumstix.com> Signed-off-by: Tom Rini <trini@ti.com> Tested-By: Ash Charles <ashcharles@gmail.com>
* k2hk_evm: add script to automate NAND flash processKhoronzhuk, Ivan2014-07-25-2/+30
| | | | | | | | | | Add script to automate NAND flash process. As for now the board has two burn scripts - burn to boot from SPI NOR flash and burn to boot from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi. Also update README to contain NAND burn U-boot process description. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
* keystone: add support for NAND gpheader imageKhoronzhuk, Ivan2014-07-25-0/+6
| | | | | | | | | Add support for NAND gpheader image. TI Keystone2 ROM bootloader expects 8 bytes of trailing zeroes in the nand u-boot image. So add zeros at the end of the nand gph image. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* mtd: nand: davinci: add opportunity to write keystone U-boot imageKhoronzhuk, Ivan2014-07-25-1/+199
| | | | | | | | | | | | | | | | | | | | | | | | The Keystone SoCs use the same NAND driver as Davinci. This patch adds opportunity to write Keystone U-boot image to NAND device using appropriate RBL ECC layout. This is needed only if RBL boots U-boot from NAND device and that's supposed that raw u-boot partition is used only for writing image. The main problem is that default Davinci ECC layout is different from Keystone RBL layout. To read U-boot image the RBL needs that image was written using RBL ECC layout. The BBT table is written using default Davinci layout and has to be updated using one. The BBT can be updated only while erasing chip or by forced bad block assigning, so erase function has to use native ecc layout in order to be able to write BBT correctly. So if we're writing to NAND U-boot address we use RBL layout for others we use default ECC layout. Also remove definition for CONFIG_CMD_NAND_ECCLAYOUT as there is no reasons to use ECC layout commands. It was added by mistake. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* tps65218/am43xx_evm: Add power framework support to TPS65218Tom Rini2014-07-25-0/+39
| | | | | | | | Add in an init function for the drivers/power framework so we can dump and read the registers via i2c. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
* power/pmic.h: Add prototype for power_init_board.Tom Rini2014-07-25-0/+1
| | | | | | | | As this is a weak function that we may override, provide a prototype for it. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
* ARM: dra7_evm: Add Ethernet support for dra72x platformMugunthan V N2014-07-25-1/+6
| | | | | | Set the active_slave to 1 as slave 1 is pinned out in dra72x base board Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* ARM: DRA7xx: Add cpsw second port pinmuxMugunthan V N2014-07-25-0/+12
| | | | | | Add cpsw second slave port pinmux to use it as primary ethernet port Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* drivers: net: cpsw: add support for using second port as ethernetMugunthan V N2014-07-25-3/+6
| | | | | | | Add support for using the second slave port of cpsw to be used as primary ethernet. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* socfpga: Relocate arch common functions away from boardChin Liang See2014-07-05-23/+24
| | | | | | | | | | | | | To move the arch common function away from board folder to arch/arm/cpu/armv7/socfpga folder. Its to avoid code duplication for other non Altera dev kit which is using socfpga device. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Acked-by: Detlev Zundel <dzu@denx.de>
* integrator: switch to generic boardLinus Walleij2014-07-05-0/+1
| | | | | | | | | Turn on generic board for the integrators, as per the request in the startup message. Everything just works, tested on the Integrator/AP and Integrator/CP. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Simon Glass <sjg@chromium.org>
* ARM: rpi_b: enable GENERIC_BOARDStephen Warren2014-07-05-0/+1
| | | | | | | Serial port, SD card, and LCD all work. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Simon Glass <sjg@chromium.org>
* arm, calimain: Add CONFIG_SYS_GENERIC_BOARDChristian Riesch2014-07-05-1/+2
| | | | Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
* arm: Fix armv8 compilation errorShaibal.Dutta2014-07-05-1/+1
| | | | | | | | | | | Fix following compilation error when CONFIG_ARM64 is defined Error: unknown or missing system register name at operand 2 -- `mrs x0,daifmsr daifset,#3' Signed-off-by: Shaibal.Dutta <shaibal.dutta@broadcom.com> Signed-off-by: Darwin Rambo <drambo@broadcom.com> Reviewed-by: Darwin Rambo <drambo@broadcom.com>
* arm:board:h2200: Add CONFIG_SYS_GENERIC_BOARDŁukasz Dałek2014-07-05-0/+1
| | | | | | | Enable 'generic board init' for H2200 palmtop. Signed-off-by: Lukasz Dalek <luk0104@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* arm: spl: fix include guardJeroen Hofstee2014-07-05-2/+2
| | | | | cc: Tom Rini <trini@ti.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* Reformat boards.cfgAlbert ARIBAUD2014-07-05-10/+10
| | | | | Run tools/reformat.py -i -d '-' -s 8 to reorder boards as header comments suggest
* socfpga: Adding Scan Manager driverChin Liang See2014-07-05-1/+980
| | | | | | | | | | | | Scan Manager driver will be called to configure the IOCSR scan chain. This configuration will setup the IO buffer settings Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Wolfgang Denk <wd@denx.de> CC: Pavel Machek <pavel@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* socfpga: Adding DesignWare watchdog supportChin Liang See2014-07-05-0/+15
| | | | | | | | | | | To enable the DesignWare watchdog support at SOCFPGA Cyclone V dev kit. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
* watchdog/denali: Adding DesignWare watchdog driver supportChin Liang See2014-07-05-0/+75
| | | | | | | | | | | | To add the DesignWare watchdog driver support. It required information such as register base address and clock info from configuration header file within include/configs folder. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
* arm: ep9315: Return back Cirrus Logic EDB9315A board supportSergey Kostanbaev2014-07-04-27/+1636
| | | | | | | This patch returns back support for old ep93xx processors family Signed-off-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com> Cc: albert.u.boot@aribaud.net
* gpio: spear_gpio: Fix gpio_set_value() implementationAxel Lin2014-07-04-1/+4
| | | | | | | | | | | | | | | | In current gpio_set_value() implementation, it always sets the gpio control bit no matter the value argument is 0 or 1. Thus the GPIOs never set to low. This patch fixes this bug. The address bus is used as a mask on read/write operations, so that independent software drivers can set their GPIO bits without affecting any other pins in a single write operation. Thus we don't need a read-modify-write to update the register. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Stefan Roese <sr@denx.de> Reviewed-by: Vipin Kumar <vipin.kumar@st.com> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
* ARM: cache_v7: use __weakJeroen Hofstee2014-07-04-55/+15
| | | | | | | | | | This is not only more readable but also prevents a warning about a missing prototype. The prototypes which are actually missing are added. cc: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Tom Rini <trini@ti.com>
* ARMv8/ls2085a_emu: Add LS2085A emulator and simulator board supportYork Sun2014-07-04-2/+622
| | | | | | | | | | | | | | | | LS2085A is an ARMv8 implementation. This adds board support for emulator and simulator: Two DDR controllers UART2 is used as the console IFC timing is tightened for speedy booting Support DDR3 and DDR4 as separated targets Management Complex (MC) is enabled Support for GIC 500 (based on GICv3 arch) Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Arnab Basu <arnab.basu@freescale.com> Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
* armv8/fsl-lsch3: Add support to load and start MC FirmwareJ. German Rivera2014-07-03-3/+383
| | | | | | | | | | | | | | | | Adding support to load and start the Layerscape Management Complex (MC) firmware. First, the MC GCR register is set to 0 to reset all cores. MC firmware and DPL images are copied from their location in NOR flash to DDR. MC registers are updated with the location of these images. Deasserting the reset bit of MC GCR register releases core 0 to run. Core 1 will be released by MC firmware. Stop bits are not touched for this step. U-boot waits for MC until it boots up. In case of a failure, device tree is updated accordingly. The MC firmware image uses FIT format. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com>
* ARMv8/FSL_LSCH3: Add FSL_LSCH3 SoCYork Sun2014-07-03-4/+944
| | | | | | | | | | | | | | Freescale LayerScape with Chassis Generation 3 is a set of SoCs with ARMv8 cores and 3rd generation of Chassis. We use different MMU setup to support memory map and cache attribute for these SoCs. MMU and cache are enabled very early to bootst performance, especially for early development on emulators. After u-boot relocates to DDR, a new MMU table with QBMan cache access is created in DDR. SMMU pagesize is set in SMMU_sACR register. Both DDR3 and DDR4 are supported. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
generated by cgit v1.1 at 2024-12-11 18:22:55 +0000