summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* mx6: Adjust the GPR offset for mx6soloxFabio Estevam2014-07-23-0/+3
| | | | | | | On mx6solox there is an additional 0x4000 offset for the GPR registers. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6: Remove duplication of iomuxc structureFabio Estevam2014-07-23-19/+5
| | | | | | | | | | | | | | | There is no need to keep iomuxc_base_regs structure as it serves the exact same purpose of the iomuxc structure, which is to provide access to the GPR registers. The additional fields of iomuxc_base_regs are not used. Other advantage of 'iomuxc' is that it has a shorter name and the variable declarations can fit into a single line. So remove iomuxc_base_regs structure and use iomuxc instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6sxsabresd: Add PFUZE100 PMIC supportFabio Estevam2014-07-23-0/+97
| | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: soc: Do not apply the PFD erratum for mx6soloxFabio Estevam2014-07-23-0/+4
| | | | | | The PFD issue is not present on mx6solox, so skip it in this case. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* embestmx6boards: convert to generic boardIain Paton2014-07-23-0/+2
| | | | | | Enable CONFIG_SYS_GENERIC_BOARD to remove warning on boot. Signed-off-by: Iain Paton <ipaton0@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2014-07-16-41097/+19467
|\ | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> Conflicts: boards.cfg
| * Prepare v2014.07Tom Rini2014-07-14-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * socfpga: timer actually counts downPavel Machek2014-07-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Timer on cyclone5 actually counts down. It took me a while to figure out, as timer counting in wrong direction actually _can_ be used, it just appears to tick at extremely high frequency in u-boot. The bug was introduced in commit 23ab7ee0ffa9d5efd0b4ad830befba306d24a327. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| * ARM: DRA7xx: Update the board_name env variableLokesh Vutla2014-07-14-0/+9
| | | | | | | | | | | | | | Update the board_name env variable and accordingly populate the dtb file. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * boards.cfg: change "<none>" in the board field to "-"Masahiro Yamada2014-07-14-9/+3
| | | | | | | | | | | | | | | | | | | | | | In the previous commit, all the board fields were filled. Now we can use "-" in the board field for a different meaning. Going forward, "-" stands for no board directory as in cpu, soc, vendor fields. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * boards.cfg: keep it sorted filling the board fieldMasahiro Yamada2014-07-14-155/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The boards.cfg file has allowed to use "-" for the board (= 6th) field if the board name is the same as the 7th field. But I notice one problem. Because tools/reformat.py sorts the lines in the simple alphabetical order (= the order of character code), some entries for the same board are not lined up together. For example, "bf527-ezkit" and "bf527-ezkit-v2" share the same board. But they are located separately because "bf527-ezkit" fills the board field with "-" whereas "bf527-ezkit-v2" specifies it explicitely. The similar things can be seen: - between "trizepsive" and "polaris" - between "RRvision" and "RRvision_LCD" - between "korat" and "korat_perm" - between "lwmon5" and "lcd4_lwmon5" This commit was generated by the following command: awk '$6 == "-" { $6 = $7 } { print }' boards.cfg \ | tools/reformat.py -i -d '-' -s 8 > boards0.cfg; \ mv boards0.cfg boards.cfg Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-07-11-2/+2
| |\
| * | usb: phy: omap_usb_phy: implement usb_phy_power() for AM437xFelipe Balbi2014-07-09-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | Newer AM437x silicon requires us to explicitly power up the USB2 PHY. By implementing usb_phy_power() we can achieve that. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * | usb: host: xhci: make sure to power up PHYFelipe Balbi2014-07-09-0/+1
| | | | | | | | | | | | | | | | | | | | | some boards won't work if the PHY isn't explicitly powered up. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * | doc: Add zynq fragment to git-mailrc fileMichal Simek2014-07-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a MIME GnuPG-signed message. If you see this text, it means that your E-mail or Usenet software does not support MIME signed messages. The Internet standard for MIME PGP messages, RFC 2015, was published in 1996. To open this message correctly you will need to install E-mail or Usenet software that supports modern Internet standards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: OMAP4/5: Change omap4_sdp/panda and omap5_uevm maintainerLokesh Vutla2014-07-09-3/+3
| | | | | | | | | | | | | | | | | | | | | Updating omap4_sdp/panda and omap5_uevm maintainer. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: R Sricharan <r.sricharan@ti.com>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-07-09-30/+215
| |\ \
| * \ \ Merge branch 'tom' of git://git.denx.de/u-boot-x86Tom Rini2014-07-07-3/+8
| |\ \ \
| | * | | buildman: fix toolchain priority_listMasahiro Yamada2014-07-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | '-elf' appears twice in the toolchain priority_list. The second one is rudundant. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| | * | | buildman: fix to display warning message for missing [toolchain] sectionMasahiro Yamada2014-07-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Toolchains.__init__ is expected to display a warning message when the [toolchain] section is missing from ~/.buildman file. But it never works. In that case, instead, buildmain fails with an error message which is difficult to understand: Traceback (most recent call last): File "tools/buildman/buildman", line 126, in <module> control.DoBuildman(options, args) File "/home/foo/u-boot/tools/buildman/control.py", line 78, in DoBuildman toolchains = toolchain.Toolchains() File "/home/foo/u-boot/tools/buildman/toolchain.py", line 106, in __init__ config_fname) NameError: global name 'config_fname' is not defined Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| | * | | cosmetic: doc: update README.generic-boardMasahiro Yamada2014-07-07-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now MIPS supports 'generic board' feature. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| | * | | patman: Only apply patches when we know the original HEADSimon Glass2014-07-07-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When patman applies the patches it checks out a new branch, uses 'git am' to apply the patches one by one, and then tries to go back to the old branch. If you try this when the branch is 'undefined', this doesn't work as patman cannot restore the correct branch after applying the patches. It seems that 'undefined' is created by git and is persistent after it is created, so that you can end up on quite an old branch. Add a check for the 'undefined' branch to avoid this. Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | TI:omap3: enable CONFIG_CMD_DHCP for omap3_beagleTyler Baker2014-07-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch re-enables the dhcp functionality on omap3_beagle. It was removed with df4dbb5df6ab1c1d27b3fd4acbaad69b47095daf when omap3_beagle was converted to use ti_omap3_common.h. I have tested beagleboard and beagleboard-xm with this patch and confirmed dhcp is working. Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
| * | | | kmake: include DTB section into u-boot.bin if CONFIG_OF_EMBED enabledAlexey Ignatov2014-07-07-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Fixes a bug when objcopy doesn't put .dtb.init.rodata section to resulting u-boot.bin, so u-boot was unable to find embedded DTB.
| * | | | git-mailrc: Add sunxi custodians.Ian Campbell2014-07-07-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
| * | | | fit: make sha256 support optionalDirk Eibach2014-07-07-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sha256 has some beefy memory footprint. Make it optional for constrained systems. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: gdsys: Remove commands to reduce footprintDirk Eibach2014-07-07-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "2842c1c fit: add sha256 support" badly increased memory footprint, so some of our boards did not build anymore. Since monitor base must not be changed I removed some commands to save memory. Maybe making sha256 optional for fit would be an option for the future since it really has some beefy footprint. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: iocon: Modify iocon hardware startupDirk Eibach2014-07-07-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid peer "ChReceivePathStatus"-messages on iocon startup, initialize PHYs as soon as possible. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: gdsys: Enable scrambling on DP501Dirk Eibach2014-07-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For proper displayport performance, scrambling has to be enabled, but is turned off on DP501 by default. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: gdsys: Make gdsys osd hardware detection more robustDirk Eibach2014-07-07-60/+79
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: gdsys: Configure bridge on DP501 to support DDC onlyDirk Eibach2014-07-07-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C bridge on DP501 supports EDID, MCCS and HDCP by default. Allow EDID only to avoid I2C address conflicts. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: gdsys: Increase iocon and dlv10g version stringDirk Eibach2014-07-07-2/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: gdsys: Fix dlvision-10g I2C configurationDirk Eibach2014-07-07-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PPC4xx config options were not complete. ICS8N3QV01 and SIL1178 needed some more configuration. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | i2c: IHS I2C master driverDirk Eibach2014-07-07-18/+261
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: iocon: Support DisplayPort hardwareDirk Eibach2014-07-07-85/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a new iocon hardware flavor, supporting DisplayPort finally. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: controlcenterd: Use new API for setting i2c busDirk Eibach2014-07-07-4/+9
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API changeDirk Eibach2014-07-07-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | board: controlcenterd: Fix pci accessDirk Eibach2014-07-07-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | readl was called with values instead of pointers to these values. Why this ever did work is a mystery... Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
| * | | | blackfin, powerpc: remove redundant definitions of ARRAY_SIZEMasahiro Yamada2014-07-07-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since ARRAY_SIZE macro is defined in include/common.h, re-defining it in arch-specific files is redundant. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Sonic Zhang <sonic.zhang@analog.com>
| * | | | blackfin: Add more dcache functionsVasili Galka2014-07-07-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add invalidate_dcache_range() and flush_dcache_range() for the blackfin architecture. Such functions already exist on this arch with different names, so just forward the call. This fixes the build of bf609-ezkit board as it uses drivers/net/designware.c which requires the above functions. Cc: Sonic Zhang <sonic.adi@gmail.com>, Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
| * | | | blackfin: Fix warning about undefined functionVasili Galka2014-07-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_sclk() was not defined in bfin_wdt.c, include the corresponding header. Cc: Sonic Zhang <sonic.adi@gmail.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
| * | | | m68k: Fix incorrect memory access on M5235Vasili Galka2014-07-07-16/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The csarX and cscrX registers in the fbcs_t struct are 16-bit for CONFIG_M5235 and 32-bit wide otherwise. The code in cpu_init.c accessed them always as 32-bit, effectively creating a wrong memory access on M5235. Fixed that by choosing out_be16/out_be32 depending on whether CONFIG_M5235 is defined or not. Cc: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
| * | | | m68k: Fix bug, "address of" operator was forgottenVasili Galka2014-07-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in_be16() shall be passed a pointer to register and not its value. This is clearly a typo resulting in a wrong memory access, so fix it. Cc: Alison Wang <b18965@freescale.com>, Jason Jin <Jason.jin@freescale.com> Signed-off-by: Vasili Galka <vvv444@gmail.com>
| * | | | mpc8xx: remove spc1920 board supportMasahiro Yamada2014-07-07-1367/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is old enough and has no maintainer. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | mpc8xx: remove v37 board supportMasahiro Yamada2014-07-07-1241/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is old enough and has no maintainer. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | mpc8xx: remove fads board supportMasahiro Yamada2014-07-07-2442/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | mpc8xx: remove netta, netta2, netphone board supportMasahiro Yamada2014-07-07-10221/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | mpc8xx: remove rbc823 board supportMasahiro Yamada2014-07-07-1552/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is old enough and has no maintainer. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | mpc8xx: remove RPXlite_dw, quantum board supportMasahiro Yamada2014-07-07-2765/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | mpc8xx: remove qs850, qs860t board supportMasahiro Yamada2014-07-07-3876/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards are old enough and have no maintainers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
generated by cgit v1.1 at 2024-12-27 05:39:22 +0000