summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* add example for file on VFAT filesystem usageWaldemar Brodkorb2015-02-17-0/+3
| | | | | | | | For example on a raspberry pi the u-boot environment can be saved in a file on the first VFAT partition. This example illustrates how to use it with fw_printenv/fw_setenv. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
* Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-02-17-155/+247
|\
| * sunxi: Support the FEL boot mode in the regular u-boot buildSiarhei Siamashka2015-02-16-10/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So that the CONFIG_SPL_FEL option is not needed anymore. And the regular SPL binary, generated by the default u-boot build, is now also bootable over USB in the FEL mode. The SPL still can boot from the SD card too. A bunch of system registers need to be saved/restored in order to ensure that the IRQ handler still works in the BROM FEL code after getting control back from the SPL. This is done in the sunxi code instead of abusing ifdefs in 'start.S'. The decision whether to load the main u-boot binary from the SD card or return to the FEL code in the BROM is done at runtime. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [hdegoede@redhat.com: Since we now restore various regs before returning to the FEL BROM code we can drop the sunxi specific #ifdefs in start.S] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Normalise FEL supportSimon Glass2015-02-16-94/+73
| | | | | | | | | | | | | | | | | | | | | | | | Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of creating its own. There are some #ifdefs required in start.S. Future work will hopefully remove these. This series is available at u-boot-dm, branch sunxi-working. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * arm: spl: Provide for a board-specific loaderSimon Glass2015-02-16-0/+9
| | | | | | | | | | | | | | | | | | | | | | Some boards have a special way of loading U-Boot that does not fit with the existing SPL code. For example sunxi uses an 'FEL' mode where U-Boot is loaded over USB. Add a CONFIG option and boot mode for this. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * arm: Allow lr to be saved by board codeSimon Glass2015-02-16-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The link register value can be required on some boards (e.g. FEL mode on sunxi) so use a branch instruction to jump to save_boot_params() instead of a branch link. This requires a branch back to save_boot_params_ret so adjust the users to deal with this. For exynos just drop the function since it doesn't do anything. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * tools: mksunxiboot: Fix problems on big endian systemsSiarhei Siamashka2015-02-16-6/+8
| | | | | | | | | | | | | | | | Now my PS3 can be also used to build u-boot for sunxi devices. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: otg: Fix peripheral modeHans de Goede2015-02-16-12/+1
| | | | | | | | | | | | | | | | Peripheral mode needs us to signal vusb high to the phy for it to work, just like the host mode does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: dram: Un-inline dram helper functionsHans de Goede2015-02-16-26/+40
| | | | | | | | | | | | | | | | | | Move the dram helper functions to a separate C file, rather then having them as inline helpers in dram.h. This saves 144 bytes in the .text segment for sun6i builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * sunxi: video: Dynamically reserve framebuffer memoryHans de Goede2015-02-16-5/+13
| | | | | | | | | | | | | | | | | | | | Only use CONFIG_SUNXI_MAX_FB_SIZE to reserve memory at the top when relocating u-boot, and calculate the actual amount of memory necessary when setting up the video-mode and use only that, freeing up some additional memory for use by the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebufferHans de Goede2015-02-16-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer, instead override board_get_usable_ram_top to make sure that u-boot is not relocated into the area where we want to use the framebuffer, and patch the devicetree from sunxi_simplefb_setup() to tell the kernel to not touch the framebuffer. This makes u-boot properly see the framebuffer as dram, and initalize the level 2 cache for it, fixing the very slow cfb scrolling problem. As an added bonus this stops us from reserving the framebuffer when simplefb is not used because an older kernel is booted, or hdp is used and no hdmi cable was plugged in, freeing up the memory for kernel use in these cases. Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * sunxi: MAINTAINERS: drop no longer existing felconfig-s from MAINTAINERSHans de Goede2015-02-16-2/+0
| | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * sunxi: Ampe A76 supportPaul Kocialkowski2015-02-16-0/+20
| | | | | | | | | | | | Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | ARM: lpc3250: config: add generic board supportVladimir Zapolskiy2015-02-16-1/+3
| | | | | | | | | | | | | | The only LPC3250 board works fine with enabled generic board support, add CONFIG_SYS_GENERIC_BOARD right into the arch config header. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* | KM/IVM: remove ivm_read_eeprom(void)Valentin Longchamp2015-02-16-26/+6
| | | | | | | | | | | | | | | | | | | | This is not used anymore since the procedure was split into a simple read function and a later alaysis. The ivm_read_eeprom name is now used for the previous ivm_simple_read_eeprom function. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | 82xx/km82xx: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+11
| | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | 83xx/km83xx: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+4
| | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | 85xx/kmp204x: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+4
| | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | kirkwood/km_arm: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+5
| | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | KM/IVM: split the IVM reading and parsing in 2 partsValentin Longchamp2015-02-16-25/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows to first read the IVM content (earlier in the boot sequence) and define the ethaddr env variable thanks to the ivm_read_eepromi(). Later, the IVM content can be parsed and used to define some hush variables, when the hush subsystem is available thanks to ivm_analyze_eeprom(). To avoid the HW read to happen twice, the buffer passed to ivm_read_eeprom() has to be reused by ivm_analyze_eeprom (and thus allocated before calling ivm_read_eeprom()). Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | spl, spl_nor: fix compiler warningHeiko Schocher2015-02-16-1/+1
| | | | | | | | | | | | | | | | | | | | | | executing "tools/buildman/buildman mpc5xx" drops this warning: common/spl/spl_nor.c: In function 'spl_nor_load_image': common/spl/spl_nor.c:26:10: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] fix this. Signed-off-by: Heiko Schocher <hs@denx.de>
* | .travis.yml: remove 824x buildsHeiko Schocher2015-02-16-3/+0
| | | | | | | | | | | | | | remove powerpc 824x build, as this architecture not longer exists. Signed-off-by: Heiko Schocher <hs@denx.de>
* | PCI: add 64-bit prefetchable memory supportDavid Feng2015-02-16-1/+35
| | | | | | | | | | | | | | | | | | | | | | PCI specification allow prefetchable memory to be 32-bit or 64-bit. PCI express specification states that all memmory bars for prefetchable memory must be implemented as 64-bit. They all require that 64 bit prefetchble memory are suported especially when u-boot is ported to more and more 64bit processors. Signed-off-by: David Feng <fenghua@phytium.com.cn> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | config_distro_bootcmd.h: Enable CONFIG_CMD_PARTHans de Goede2015-02-16-0/+4
| | | | | | | | | | | | | | | | | | | | The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be defined, as the default bootcmd now uses the "part" command. This fixes sunxi boards not booting with v2015.04-rc1. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* | image: Convert to use fdt_for_each_subnode macroAxel Lin2015-02-16-15/+5
| | | | | | | | | | | | | | Use fdt_for_each_subnode macro to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Simon Glass <sjg@chromium.org>
* | tools/imagetool: remove linker scriptAndreas Bießmann2015-02-16-55/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a93648d197df48fa46dd55f925ff70468bd81c71 introduced linker generated lists for imagetool which is the base for some host tools (mkimage, dumpimage, et al.). Unfortunately some host tool chains do not support the used type of linker scripts. Therefore this commit broke these host-tools for them, namely FreeBSD and Darwin (OS/X). This commit tries to fix this. In order to have a clean distinction between host and embedded code space we need to introduce our own linker generated list instead of re-using the available linker_lists.h provided functionality. So we copy the implementation used in linux kernel script/mod/file2alias.c which has the very same problem (cause it is a host tool). This code also comes with an abstraction for Mach-O binary format used in Darwin systems. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | net: keystone_net: move serdes setup to initialization functionVitaly Andrianov2015-02-16-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | On Keystone2 devices serdes must be initialized before accessing MDIO bus. This commit moves the keystone2_net_serdes_setup() from keystone2_eth_open to keystone2_emac_initialize to meet that requirement. This also eliminates unnecessary serdes initializatin every time when the keystone2_eth_open is being called. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Nishanth Menon <nm@ti.com>
* | keystone2: ddr3: eliminate using global ddr3_size variableVitaly Andrianov2015-02-16-36/+17
| | | | | | | | | | | | | | | | | | | | | | | | KS2 ddr3 initialization uses ddr3_size global variable before u-boot relocation. Even if the variable is not being used after relocation, writing to it corrupts relocation table. This patch removes the global ddr3_size variable and uses local one instead. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Tested-by: Nishanth Menon <nm@ti.com>
* | clock_am43xx:Set the MAC clock to /5 for OPP100Steve Kipisz2015-02-16-0/+5
| | | | | | | | | | | | | | | | When EMAC is in the boot order, the boot ROM sets OPP50 and the MAC clock is set to /2. SPL needs to change it to /5 for Ethernet to generate the correct txclk. This patch sets it correctly. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
* | ARM: DRA7-evm: DDR3: Update leveling valuesLokesh Vutla2015-02-16-30/+30
| | | | | | | | | | | | | | Update the software leveling parameters. This fixes the random crash seen on DRA7-evm. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: DRA7: EMIF: Update SDRAM_REF_CTRL register valueLokesh Vutla2015-02-16-6/+14
| | | | | | | | | | | | | | | | | | | | | | The value in SDRAM_REF_CTRL controls the delay time between the initial rising edge of DDR_RESETn to rising edge of DDR_CKE (JEDEC specs this as 500us). In order to achieve this, SDRAM_REF_CTRL should be written with a value corresponding to 500us delay before starting DDR initialization sequence, and configure proper value at the end of sequence. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: DRA72x: DDR3: Fix EMIF timings for 666MHz clockAngela Stegmaier2015-02-16-8/+8
| | | | | | | | | | | | | | | | | | | | DDR3 timing and latency paramenters were not configured correctly for 666MHz. Fixing the timing and latency values according to Data sheet. This fixes the random crashes seen on DRA72-evm. Signed-off-by: Angela Stegmaier <angelabaker@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | mtd, omap: fix case NAND_OMAP_GPMC_PREFETCH not definedEgli, Samuel2015-02-16-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch c316f577b4b72d1a1aeb559e9b3fad20808f1ffd breaks siemens boards because prefetch mode is not enabled. I assume it breaks other boards as well that don't use prefetch. This patch sets read_buf to nand_read_buf if NAND_OMAP_GPMC_PREFETCH is not defined. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> CC: Daniel Mack <zonque@gmail.com> CC: Guido Martínez <guido@vanguardiasur.com.ar> CC: Tom Rini <trini@ti.com> CC: Heiko Schocher <hs@denx.de>
* | Merge git://git.denx.de/u-boot-marvellTom Rini2015-02-16-17/+164
|\ \
| * | lsxl: add a README fileMichael Walle2015-02-16-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | The README describes the recovery method which can be used if the NAS box is not reachable anymore. Addionally, it describes the different boot scripts. Signed-off-by: Michael Walle <michael@walle.cc>
| * | lsxl: switch from bootm to bootz for boot commandsMichael Walle2015-02-12-13/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the bootz command to load zImages in case of any new boot scripts. Only the legacy one will still use bootm. Apart form the fact, that this will simplify the image generation process, it saves one copy of the kernel image: Common practice is to generate an uImage with a loading address of 0x8000. This uImage contains a compressed zImage, which will unpack the kernel image to the beginning of the RAM. But because there is already the compressed image the uncompressor first relocates the compressed image to a higher location. The load address is encoded into the uImage which is generated by the distributions and thus cannot be easily changed. By using the bootz command we can load the compressed image to a higher memory address and the decompressor doesn't have to reloacte the image. Signed-off-by: Michael Walle <michael@walle.cc>
| * | lsxl: place the dtb below the inital ramdiskMichael Walle2015-02-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dtb was loaded at a memory address after the initial ramdisk. Thus a large ramdisk would overwrite the dtb. Move it to "ramdisk_start - 64k". 64k should be enough for the device tree blob. Also the kernel documentation arm/Booting suggests to put the dtb before the initial ramdisk. Signed-off-by: Michael Walle <michael@walle.cc>
| * | lsxl: use default load addresses for legacy bootMichael Walle2015-02-12-3/+3
| |/ | | | | | | | | | | | | | | | | | | The load addresses for the bootcmd_legacy script were taken from the original bootloader from Buffalo. But newer kernels are too big and the uncompressing will overwrite parts of the initial ramdisk. Therefore, we switch to the load addresses which are also used by the other boot script. Signed-off-by: Michael Walle <michael@walle.cc>
* | Merge branch 'sandbox' of git://git.denx.de/u-boot-x86Tom Rini2015-02-16-33/+43
|\ \
| * | sandbox: Adjust the order of the NO_SDL checkSimon Glass2015-02-15-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An option is provided to avoid using SDL in U-Boot sandbox (and drop support for the LCD). However the check in the Makefile is too late and warnings are printed even if NO_SDL=y is given. Adjust the order to avoid this warning. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| * | sandbox: Return '-c command' exit value as sandbox exit codeJoe Hershberger2015-02-15-22/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a command is passed into sandbox using the '-c' argument the command is run directly. This is most helpful when running tests (such as test-dm.sh). Previously the exit code was an unused enum. Change it to be the actual return code from the command so that the script calling sandbox can know if the command succeeded (tests passed). Also remove the now completely unused "exit_state" in sandbox. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | buildman: allow multiple toolchains in a single pathAlbert ARIBAUD2015-02-15-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When buildman scans a toolchain path, it stops at the first toolchain found. However, a single path can contains several toolchains, each with its own prefix. This patch lets buildman scan all toolchains in the path. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Glass <sjg@chromium.org>
| * | patman: Read in the git-mailrc alias fileSimon Glass2015-02-15-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should read this file to obtain a set of aliases. This reduces the need to create them in the ~/.patman file. This feature did exist in some version of patman, and is mentioned in the help but it did not find its way upstream. Reported-by: Graeme Russ <gruss@tss-engineering.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Fix incorrect arguemnt in GetUpstream()Simon Glass2015-02-15-1/+1
| |/ | | | | | | | | | | | | | | This causes an error when trying to build a local branch which has a local branch as its upstream. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | Merge git://git.denx.de/u-boot-samsungTom Rini2015-02-13-335/+383
|\ \
| * | Exynos: Clock: Cleanup soc_get_periph_rateAkshay Saraswat2015-02-13-39/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we have src, div and pre-div mask bits defined corresponding to peripherals, calculation of clock specific to I2C appears redundant and confusing. Using clk_bit_info struct we can write calculations generic to all peripherals which makes code easy to understand and free from peripheral specific exceptions. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos: clock: change mask bits as per peripheralAkshay Saraswat2015-02-13-73/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have assumed and kept mask bits for divider and pre-divider as 0xf and 0xff, respectively. But these mask bits change from one peripheral to another, and hence, need to be specified in accordance with the peripherals. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos5: Use clock_get_periph_rate generic APIAkshay Saraswat2015-02-13-235/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replacing SoC and peripheral specific function calls with generic clock_get_periph_rate calls to get the peripheral clocks. Also, removing dead code of peripheral and SoC specific function implementations which was used earlier for fetching peripheral clocks. This code is not being used anymore because of the introduction of generic clock_get_periph_rate function. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos5: Fix exynos5_get_periph_rate calculationsAkshay Saraswat2015-02-13-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | exynos5_get_periph_rate function reads incorrect div for SDMMC2 & 3. It also reads prediv and does division only for SDMMC0 & 2 when actually various other peripherals need that. Adding changes to fix these mistakes in periph rate calculation. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Exynos542x: Add and enable get_periph_rate supportAkshay Saraswat2015-02-13-7/+150
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We planned to fetch peripheral rate through one generic API per peripheral. These generic peripheral functions are in turn expected to fetch apt values from a function refactored as per SoC versions. This patch adds support for fetching peripheral rates for Exynos5420 and Exynos5800. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-11-22 19:35:41 +0000