summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* video, da8xx-fb: changes for am335x usageHeiko Schocher2013-08-10-58/+307
| | | | | | | | | | | | | | | | | | | | | | | | | | | to use this driver also on am335x based boards, the following changes are made: - struct lcd_ctrl_config lcd_cfg is now configurable through board code - controller base is configurable through define DA8XX_LCD_CNTL_BASE. To be compatible with older da8xx based boards: If this define is missing, the DAVINCI_LCD_CNTL_BASE is used - Determine LCD IP Version, and make the driver working on lcd revision register values: Version 1: 0x4C100102 Version 2: 0x4F200800 0x4F201000 Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
* arm, am33xx: add clk_get prototypeHeiko Schocher2013-08-10-0/+1
| | | | | | | | | the clk_get() function is needed for the da8xx-fb video driver, which is used on the am3xx based siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
* video, da8xx: move da8xx-fb.h to drivers/videoHeiko Schocher2013-08-10-3/+4
| | | | | | | | | | | | | the da8xx-fb driver works also on am335x boards. So move the da8xx-fb.h file from arch/arm/include/asm/arch-davinci to drivers/video, so this driver can used from am335x based boards. Also add WVGA panel_type. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
* video: add L5F31188 TFT-LCD panel driverHyungwon Hwang2013-08-10-0/+193
| | | | | | | | | | | | | This is u-boot driver for L5F31188 panel. I tested it in the board based on MIPI DSI with EXYNOS4 series, and it worked well. Changes in V2: - Replaced license header by SPDX-License-Identifier. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Donghwa Lee <dw09.lee@samsung.com> [agust: sort Makefile entry alphabetically] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* video: Fix cfb_console for 4-bit wide fontMarek Vasut2013-08-10-0/+21
| | | | | | | | | The cfb_console can't handle 4-bit wide font properly, since with 4-bit wide font, all 8 bits are drawn. Unbreak the video_drawchars() function to correctly render 4-bits only on such fonts. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
* video: Implement continuous screen refresh for SmartLCD into mxsfbMarek Vasut2013-08-09-0/+26
| | | | | | | | | | | | | The LCDIF interface doesn't give us any means to do continuous refresh when driving a SmartLCD. To work this around, we produce a special circular DMA descriptor, which only writes the HW_LCDIF_CTRL0 register and sets the RUN bit. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* video: Add System-Mode configuration hook into mxsfbMarek Vasut2013-08-09-0/+16
| | | | | | | | | | | | | | | | Add hook that allow configuring SmartLCD attached the MXS LCDIF controller operating in System-Mode. This hook can be overriden by a platform-specific SmartLCD programming routine, which writes the SmartLCD specific values into it's registers. Also, this patch makes sure the SYNC signals are off for the SmartLCD case. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* video: Allocate the MXSFB framebuffer alignedMarek Vasut2013-08-09-1/+2
| | | | | | | | | | | | Allocate the framebuffer aligned so it can be flushed and the flush_dcache_range() function won't complain. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* dma: apbh: Add special circular mode for LCDMarek Vasut2013-08-09-0/+24
| | | | | | | | | | | | | | | | | | Add special function that executes a specially crafted circular DMA descriptor. The function doesn't wait for the descriptor to finish the transfer, since the descritor never finishes. This is useful when operating a SmartLCD through the LCDIF interface, as the LCDIF does not give us any means to have continuous refresh of the SmartLCD. Instead, the RUN bit in the LCDIF CTRL register must be triggered manually. This can be worked around by starting an DMA transfer which continuously sets the RUN bit. This function allows starting exactly such transfer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* nds32: fix the missing COBJS-y changeken kuo2013-08-09-1/+1
| | | | | | | | | | | | There is a missing in previous commit 951344b778d6ac67b94011d942a5a55da7202027 (nds32: Convert Makefiles to use COBJS-y style) will cause compile error. Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com> Cc: Macpaul Lin <macpaul@gmail.com> Cc: Andes <uboot@andestech.com> Signed-off-by: Andes <uboot@andestech.com>
* nds32: introduce DMA allocation APIken kuo2013-08-09-0/+33
| | | | | | | | | | | | | | | U-Boot does not compile for the adp-ag101 boards since commit a8f9cd1893bef05b92f63242228607b45821c4a7 (net: update FTGMAC100 for MMU/D-cache support) The driver assumes that the DMA allocation API are provided by all architectures. This is not the case for nds32 and it causes a build error. This patch adds DMA allocation API to avoid the errors. Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com> Cc: Macpaul Lin <macpaul@gmail.com> Cc: Andes <uboot@andestech.com> Signed-off-by: Andes <uboot@andestech.com>
* nds32: Change of NDS32 CustodianAndes2013-08-09-1/+1
| | | | | | Signed-off-by: Andes <uboot@andestech.com> Cc: Macpaul Lin <macpaul@gmail.com> Cc: Kuan-Yu Kuo <ken.kuoky@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-08-06-6/+6
|\
| * i2c: soft: Fix typo in CONFIG_SYS_I2C_SOFT_SPEEDMarek Vasut2013-08-03-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case only the CONFIG_SYS_I2C_SPEED is set in configuration file, the CONFIG_SYS_I2C_SOFT_SPEED is defined as CONFIG_SYS_I2C_SPEED. The CONFIG_SYS_I2C_SOFT_SPEED is then used throughout the driver. Unfortunatelly, due to a typo in the driver, instead of defining CONFIG_SYS_I2C_SOFT_SPEED, an CONFIG_SYS_SOFT_I2C_SPEED was defined and therefore the driver failed to compile. The same applies for CONFIG_SYS_I2C_SOFT_SLAVE , where the swap happens as well. This patch fixes the issue. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de>
* | dts/Makefile: pass -undef -D__DTS__ to cppStephen Warren2013-08-02-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This brings U-Boot's cpp invocation into line with the way the Linux kernel invokes cpp on device trees. Consistency will be useful to ensure *.dts is portable between the two. -undef also has the added advantage of not defining "linux", so DT property names such as "linux,keymap" don't get mangled. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dts/Makefile: don't use cpp -PStephen Warren2013-08-02-1/+1
| | | | | | | | | | | | | | | | | | Recent dtc supports #line directives in the input source code, and even uses them to generate useful line numbers in any messages it emits. Stop passing -P to cpp, since there's no need any more. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | config: don't define CONFIG_ARCH_DEVICE_TREEStephen Warren2013-08-02-60/+1
| | | | | | | | | | | | | | Now that nothing uses CONFIG_ARCH_DEVICE_TREE, stop defining it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dts/Makefile: don't define ARCH_CPU_DTS, BOARD_DTSStephen Warren2013-08-02-7/+0
| | | | | | | | | | | | | | | | Now that nothing uses the defines ARCH_CPU_DTS, BOARD_DTS, stop defining them. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dt: don't use ARCH_CPU_DTSStephen Warren2013-08-02-3/+3
| | | | | | | | | | | | | | | | | | Now that we assume dtc supports the -i option, we don't need to use ARCH_CPU_DTS in *.dts{,i}; we simply specify the include filename directly, and dtc will find it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dts/Makefile: unify cpp/dtc include pathsStephen Warren2013-08-02-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | *.dts may use #include (via cpp) or /include/ (via dtc; assuming a newer dtc). The choice is up to the creator of the DT. Create a common variable DTC_INCDIRS that lists the paths searched by include statements, and update cpp and dtc invocation to use them. For cpp, also specify -nostdinc to ensure the same set of paths is available to both type of include statement. For dtc, create a new DTC_FLAGS variable to hold all the flags passed to dtc. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | dts/Makefile: simplify dtc invocationStephen Warren2013-08-02-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The invocation of dtc is significantly more complex that it could be, in order to work around an issue on old versions of dtc, which print a message to stdout every time they run. Remove this workaround, on the assumption that people have or will upgrade to a newer version of dtc. This simplifies the build rule significantly. Related, split the invocation of cpp and dtc into separate commands rather than a pipeline, so that if either fail, it is detected. This has the nice benefit of saving off the result of the pre-processing step, allowing it to be easily inspected. Assuming a new enough dtc (which an earlier patch enforces), dtc will parse #line directives in its input file, and generate correct file and line numbers in error messages, even though cpp is unconditionally applied to its input file. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | xilinx: move microblaze-generic .dts to standard locationStephen Warren2013-08-02-2/+1
| | | | | | | | | | | | | | | | | | | | Aside from microblaze, all other SoCs/boards/vendors store their DT files in board/$vendor/dts/$soc-$board.dts. Move microblaze-generic.dts to this location for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <monstr@monstr.eu>
* | Validate dtc is new enoughStephen Warren2013-08-02-1/+28
|/ | | | | | | | | Subsequent patches assume that dtc supports various recent features. These are available in dtc 1.4.0. Validate that dtc is at least that version. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2013-08-01-158/+423
|\
| * ehci-hcd: fix memory leak in lowlevel initNikita Kiryanov2013-07-29-1/+3
| | | | | | | | | | | | | | | | | | | | usb_lowlevel_init() allocates a new periodic_list each time it is invoked, without freeing the original list. Since it is initialized later on in the code, just reuse the first-allocated list in future invocations of usb_lowlevel_init. Cc: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * usb_hub: fix power cycling logicNikita Kiryanov2013-07-29-2/+2
| | | | | | | | | | | | | | | | | | | | | | When power cycling the hub ports, a misbehaving port will prevent all ports from being powered on because we quit at the first sign of trouble. Skip problematic ports instead of failing the entire power on. Cc: Marek Vasut <marex@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
| * usb: ehci-omap: Don't softreset USB High-speed Host (UHH) ModuleRoger Quadros2013-07-29-12/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes NFS root problems with Beagle (3530 ES1.0) when used with external USB-ethernet adapter and "USB start" command used within u-boot. Soft resetting the UHH module causes instability issues on all OMAPs so we just avoid it. See OMAP36xx Errata i571: USB host EHCI may stall when entering smart-standby mode i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock On OMAP4/5, soft-resetting the UHH module can put it into Smart-Idle mode and lead to a deadlock. On OMAP3 this doesn't seem to be the case but still instabilities are observed on beagle (3530 ES1.0) if soft-reset is used. e.g. NFS root failures with Linux kernel. Signed-off-by: Roger Quadros <rogerq@ti.com>
| * dfu: Implementation of target reset after communication with dfu-util's -R ↵Lukasz Majewski2013-07-29-1/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | switch This patch extends dfu code to support transmission with -R switch specified at dfu-util. When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after successful data transmission. Then dfu resources are released and reset command is issued. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| * usb: mv_udc: Add bounce bufferMarek Vasut2013-07-29-8/+82
| | | | | | | | | | | | | | | | | | | | | | | | The requests sent to the controller are not properly cache aligned most of the time, thus implement a simple bounce buffer to avoid problem with cache. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Add proper cache managementMarek Vasut2013-07-29-5/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | Implement functions to flush/invalidate dcache over QH and qTDs and make use of them where appropriate. Also use them to replace the old incorrect cache management attempt. This is the first step towards making this driver work with data cache enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Implement better qTD item accessorMarek Vasut2013-07-29-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | The code for retrieving qTD item for particular endpoint is hard to understand, moreover it's duplicated all over the driver. Move the code into single nice and documented function. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Improve allocation of qTD itemsMarek Vasut2013-07-29-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | Allocate the qTD items all at once instead of allocating them separately. Moreover, make sure each qTD is properly aligned to 32-bytes boundary and that cache can be safely flushed over each qTD touple. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Implement better QH accessorMarek Vasut2013-07-29-5/+18
| | | | | | | | | | | | | | | | | | | | | | | | The code for retrieving QH for particular endpoint is hard to understand, moreover it's duplicated all over the driver. Move the code into single nice and documented function. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Add cacheline length checkMarek Vasut2013-07-29-0/+10
| | | | | | | | | | | | | | | | | | | | | | Check the length of system cacheline at compile-time and fail if the system uses too long cachelines. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Properly align the endpoint QH and qTD listMarek Vasut2013-07-29-8/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The endpoint QH list has to be aligned to 10-bit boundary. We also have to make sure the list is aligned on a cacheline boundary. Make sure it is. Furthermore, check if the memory allocation for the QH list didn't fail. Moveover, improve the comment about the QH list structure. Finally, the qTD item list has to be aligned only to 5-bit boundary, not 10-bit as it is now, fix this as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Move QH and qTD into mv_drvMarek Vasut2013-07-29-13/+15
| | | | | | | | | | | | | | | | | | | | | | Both the endpoint queue head and the endpoint item list is a controller specific thing. Move them both into controller private data. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Init mv_drv.gadget.ops staticallyMarek Vasut2013-07-29-3/+3
| | | | | | | | | | | | | | | | | | | | There is no need to init this field at runtime, so init it statically. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Remove QH_MAXNUM macroMarek Vasut2013-07-29-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | The QH_MAXNUM is used in absolutelly incorrect manner and is not even needed. Remove it and correctly replace it's occurance with 2 * NUM_ENDPOINTS . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Clean up the initial variable checkMarek Vasut2013-07-29-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Clean up the code that checks the validity of a USB gadget driver in usb_gadget_register_driver(). Moreover, limit the speed of the driver to either FULL or HIGH, this is more precise and once we have xHCI support, also more correct. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Make use of struct ehci_ctrlMarek Vasut2013-07-29-21/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb_lowlevel_init() call already fills and passes back struct ehci_ctrl , which readily contains correctly determined address of the port register block address computed from values from controller configuration registers. Leverage this and make use of this value as this makes the code mode universal, but also gets us rid of the CONFIG_USB_REG_BASE configuration option. Moreover, this patch cleans up the usb_gadget_register_driver() call a little by correcting the error handling. Note the usb_lowlevel_init() and mvudc_probe() are now called in reversed order, but this has no impact on the code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: ehci: Split out struct ehci_ctrl definitionMarek Vasut2013-07-29-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | Move the struct ehci_ctrl defition from ehci-hcd.c into ehci.h so it can be re-used by drivers. In particular, the mv_udc driver can benefit from this move. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Clean up the EP initializationMarek Vasut2013-07-29-13/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the constant values that are programmed into mv_ep.ep into separate static const structure so they can be memcpy()'d when the initialization happens. Moveover, we only every init NUM_ENDPOINTS, not 2 * NUM_ENDPOINTS, so fix this bug as well. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Move endpoint array into driver dataMarek Vasut2013-07-29-32/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | The endpoints are operated on a per-controller basis, move the endpoint array into controller's private data. Also shuffle the struct mv_ep structure definition just above the definition of the struct mv_drv so they're well grouped together. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Clean up mv_udc.hMarek Vasut2013-07-29-37/+23
| | | | | | | | | | | | | | | | | | | | | | | | Do a coding-style cleanup of this file and throw away useless defined values. These values were likely a result of a copy-paste job. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * usb: mv_udc: Unbreak the mv_udc driverMarek Vasut2013-07-29-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | The mv_udc driver is broken for a while and doesn't even compile. This patch fixes the issues and gets the driver into working state again. This driver was tested on Freescale i.MX233/i.MX28 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Lei Wen <leiwen@marvell.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
* | spi: bfin_spi: Use DIV_ROUND_UP instead of open-codedAxel Lin2013-07-31-3/+1
| | | | | | | | | | | | | | | | Use DIV_ROUND_UP to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | blackfin: Fix using gd->baudrate before setting its valueAxel Lin2013-07-31-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code uses gd->baudrate before setting its value. Besides, I got below build warning which is introduced by commit ddb5c5be "blackfin: add baudrate to bdinfo". board.c:235:3: warning: passing argument 1 of 'simple_strtoul' makes pointer from integer without a cast [enabled by default] include/vsprintf.h:27:7: note: expected 'const char *' but argument is of type 'unsigned int' This patch ensures we get the baudrate setting before using it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | blackfin: gpio: Use proper mask for comparing functionAxel Lin2013-07-31-5/+6
| | | | | | | | | | | | | | | | | | | | | | The function return from P_FUNCT2MUX(per) takes 2 bits, however for BF537_FAMILY with offset != 1 the function is 1 bit. Also has small refactor for better readability. In portmux_setup(), it looks odd having "muxreg &= ~(3 << 1);" while in current code we do muxreg |= (function << offset);. Signed-off-by: Axel Lin <axel.lin@ingics.com>
* | gpio: adi_gpio2: Unreserve gpio in special_gpio_free()Axel Lin2013-07-31-2/+2
| | | | | | | | | | | | | | In special_gpio_free(), call unreserve() rather than reserve() to release gpio. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | blackfin: gpio: Unreserve gpio in special_gpio_free()Axel Lin2013-07-31-2/+2
| | | | | | | | | | | | | | In special_gpio_free(), call unreserve() rather than reserve() to release gpio. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
generated by cgit v1.1 at 2024-12-30 20:57:46 +0000