summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Remove the duplicate memory test code for mpc744ihpc2 board.roy zang2006-12-04-400/+0
| | | | | | If a memory test is needed, please use the functions in post/memory.c or memtest command. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* Fix the exception occuring in RAM table search issue.roy zang2006-12-01-21/+23
| | | | | | | | | | | | | The original search_one_table() function code can only processes the search for the exception occurring in FLASH/ROM, because the exception and fixup table usually locate in FLASH. If the exception address is also in FLASH, it will be OK. If the exception occurs in RAM, after the u-boot relocation, a relocation offset should be added. clean up the code in cpu/74xx_7xx/cpu.c Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* Fix the confilcts when merging 'master' into hpc2.roy zang2006-12-01-2036/+22489
|\ | | | | | | | | | | | | | | | | | | | | | | | | The conflicts due to a new mpc7448 p3m7448 board is in the main tree. Merge branch 'master' into hpc2 Conflicts: MAKEALL cpu/74xx_7xx/cpu.c cpu/74xx_7xx/cpu_init.c cpu/74xx_7xx/speed.c
| * Code cleanup.Wolfgang Denk2006-11-30-1296/+1725
| |
| * Merge with http://opensource.freescale.com/pub/scm/u-boot-83xx.gitWolfgang Denk2006-11-30-1647/+11314
| |\
| | * Make fsl-i2c not conflict with SOFT I2CJoakim Tjernlund2006-11-29-11/+10
| | | | | | | | | | | | Signed-off-by: Timur Tabi <timur@freescale.com>
| | * Fix I2C master address initialization.Joakim Tjernlund2006-11-29-1/+1
| | | | | | | | | | | | Signed-off-by: Timur Tabi <timur@freescale.com>
| | * Merge http://www.denx.de/git/u-bootKim Phillips2006-11-28-219/+2368
| | |\
| | * | Assign maintainers for mpc8349emds and mpc8360emdsKim Phillips2006-11-28-0/+8
| | | | | | | | | | | | | | | | Dave for mpc8360emds, and me for mpc8349emds.
| | * | Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.cKim Phillips2006-11-28-3/+3
| | | | | | | | | | | | | | | | | | | | give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src since they are passed by reference to ucc_get_cmxucr_reg and assigned.
| | * | mpc83xx: Miscellaneous code style fixesTimur Tabi2006-11-28-218/+108
| | | | | | | | | | | | | | | | | | | | | | | | Implement various code style fixes and similar changes. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | mpc83xx: Update 83xx to use fsl_i2c.cTimur Tabi2006-11-03-620/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. Added multiple I2C bus support to fsl_i2c.c. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | mpc83xx: Replace CFG_IMMRBAR with CFG_IMMRTimur Tabi2006-11-03-82/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx tree matches the other 8xxx trees. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | mpc83xx: Lindent and clean up cpu/mpc83xx/speed.cKim Phillips2006-11-03-79/+82
| | | |
| | * | mpc83xx: Fix the incorrect dcbz operationDave Liu2006-11-03-34/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 834x rev1.x silicon has one CPU5 errata. The issue is when the data cache locked with HID0[DLOCK], the dcbz instruction looks like no-op inst. The right behavior of the data cache is when the data cache Locked with HID0[DLOCK], the dcbz instruction allocates new tags in cache. The 834x rev3.0 and later and 8360 have not this bug inside. So, when 834x rev3.0/8360 are working with ECC, the dcbz instruction will corrupt the stack in cache, the processor will checkstop reset. However, the 834x rev1.x can work with ECC with these code, because the sillicon has this cache bug. The dcbz will not corrupt the stack in cache. Really, it is the fault code running on fault sillicon. This patch fix the incorrect dcbz operation. Instead of CPU FP writing to initialise the ECC. CHANGELOG: * Fix the incorrect dcbz operation instead of CPU FP writing to initialise the ECC memory. Otherwise, it will corrupt the stack in cache, The processor will checkstop reset. Signed-off-by: Dave Liu <daveliu@freescale.com>
| | * | mpc83xx: add OF_FLAT_TREE bits to 83xx boardsKim Phillips2006-11-03-20/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and STDOUT_PATH configuration bits to mpc8349emds, mpc8349itx, and mpc8360emds board code. redo environment to use bootm with the fdtaddr for booting ARCH=powerpc kernels by default, and provide default fdtaddr values.
| | * | mpc83xx: change ft code to modify local-mac-address propertyKim Phillips2006-11-03-2/+2
| | | | | | | | | | | | | | | | | | | | Update 83xx OF code to update local-mac-address properties for ethernet instead of the obsolete 'address' property.
| | * | mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and ↵Timur Tabi2006-11-03-109/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPC8360EMDS This patch also adds an improved I2C set_speed(), which handles all clock frequencies. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | mpc83xx: add the README.mpc8360emdsDave Liu2006-11-03-0/+126
| | | | | | | | | | | | | | | | add doc/README.mpc8360emds to accompany the new board support
| | * | mpc83xx: add QE ethernet supportDave Liu2006-11-03-7/+4138
| | | | | | | | | | | | | | | | this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
| | * | mpc83xx: Add MPC8360EMDS basic board supportDave Liu2006-11-03-276/+2092
| | | | | | | | | | | | | | | | | | | | Add support for the Freescale MPC8360EMDS board. Includes DDR, DUART, Local Bus, PCI.
| | * | mpc83xx: add the QUICC Engine (QE) immap fileDave Liu2006-11-03-0/+550
| | | | | | | | | | | | | | | | common QE immap file. Also required for 8360.
| | * | mpc83xx: Add 8360 specifics to 83xx immapDave Liu2006-11-03-571/+1404
| | | | | | | | | | | | | | | | | | | | Mainly add QE device dependencies, with appropriate 8360 protection. Lindent also run.
| | * | mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITXTimur Tabi2006-11-03-20/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" CHANGELOG: * For the 8349E-mITX, fix some size values in pci_init_board(), enable the clock for the 2nd USB board (Linux kernel will hang otherwise), and fix the CONFIG_BOOTARGS macro. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | mpc83xx: Add support for the MPC8349E-mITXTimur Tabi2006-11-03-13/+1926
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PREREQUISITE PATCHES: * This patch can only be applied after the following patches have been applied: 1) DNX#2006090742000024 "Add support for multiple I2C buses" 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" CHANGELOG: * Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | Additional MPC8349 support for multibus i2cBen Warren2006-11-03-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello, Here is a patch for a file that was accidentally left out of a previous attempt. It accompanies the patch with ticket DNX#2006090742000024 CHANGELOG: Change PCI initialization to use new multi-bus I2C API. regards, Ben
| | * | Multi-bus I2C implementation of MPC834xBen Warren2006-11-03-35/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello, Attached is a patch implementing multiple I2C buses on the MPC834x CPU family and the MPC8349EMDS board in particular. This patch requires Patch 1 (Add support for multiple I2C buses). Testing was performed on a 533MHz board. /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ Signed-off-by: Ben Warren <bwarren@qstreams.com> CHANGELOG: Implemented driver-level code to support two I2C buses on the MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds are 50kHz, 100kHz and 400kHz on each bus. regards, Ben
| | * | Add support for multiple I2C busesBen Warren2006-11-03-6/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello, Attached is a patch providing support for multiple I2C buses at the command level. The second part of the patch includes an implementation for the MPC834x CPU and MPC8349EMDS board. /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ Signed-off-by: Ben Warren <bwarren@qstreams.com> Overview: 1. Include new 'i2c' command (based on USB implementation) using CONFIG_I2C_CMD_TREE. 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that the commands to change bus number and speed are only available under the new 'i2c' command mentioned in the first bullet. 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form of an array of bus-device pairs. Otherwise, it is an array of uchar. CHANGELOG: Added new 'i2c' master command for all I2C interaction. This is conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for setting I2C bus speed as well as changing the active bus if the board has more than one (conditionally compiled with CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. Updated README. regards, Ben
| | * | mpc83xx: Add support for Errata DDR6 on MPC 834x systemsTimur Tabi2006-11-03-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CHANGELOG: * Errata DDR6, which affects all current MPC 834x processors, lists changes required to maintain compatibility with various types of DDR memory. This patch implements those changes. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for itTimur Tabi2006-11-03-0/+1
| | | |
| | * | mpc83xx: Add support for variable flash memory sizes on 83xx systemsTimur Tabi2006-11-03-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CHANGELOG: * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access window registers, instead of using a hard-coded value of 8MB. Signed-off-by: Timur Tabi <timur@freescale.com>
| | * | mpc83xx: Unified TQM834x variable names with 83xx and consolidated macrosTanya Jiang2006-11-03-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Unified TQM834x variable names with 83xx and consolidated macro in preparation for the 8360 and other upcoming 83xx devices. Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
| | * | mpc83xx: Changed to unified mpx83xx names and added common 83xx changesDave Liu2006-11-03-228/+384
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorporated the common unified variable names and the changes in preparation for releasing mpc8360 patches. Signed-off-by: Dave Liu <daveliu@freescale.com>
| | * | mpc83xx: Fix missing build for mpc8349emds pci.cTanya Jiang2006-11-03-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Make pci build for mpc8349emds Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
| | * | mpc83xx: Removed unused file resetvec.S for mpc83xx cpuTanya Jiang2006-11-03-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | Removed unused file resetvec.S for mpc83xx cpu Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
| | * | NAND Flash verify across block boundariesNick Spence2006-11-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is defined and the write crosses a block boundary. The pointer to the verification buffer (bufstart) is not being updated to reflect the starting of the new block so the verification of the second block fails. CHANGELOG: * Fix NAND FLASH page verification across block boundaries
| | * | Added RGMII support to the TSECs and Marvell 881111 PhyNick Spence2006-11-03-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added a phy initialization to adjust the RGMII RX and TX timing Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode Signed-off-by: Nick Spence <nick.spence@freescale.com>
| * | | Code cleanup. Update CHANGELOG.Wolfgang Denk2006-11-30-390/+482
| | | |
| * | | [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripheralsGrant Likely2006-11-29-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, not the XLB frequency. This patch depends on the previous patches for MPC52xx device tree support Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
| * | | [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boardsStefan Roese2006-11-29-10/+10225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are quite similar and share the same board directory "prodrive/p3mx" and the same config file "p3mx.h". Signed-off-by: Stefan Roese <sr@denx.de>
| * | | [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx commandStefan Roese2006-11-29-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the bootvx command the load address was only read from the env variable "loadaddr" and not optionally passed as paramter as described in the help. This is fixed with this patch. The behaviour is now the same as in the bootelf command. Signed-off-by: Stefan Roese <sr@denx.de>
| * | | [PATCH] include/ppc440.h minor error affecting interruptsStefan Roese2006-11-29-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed include/ppc440.c for UIC address Bug Corrects bug affecting the addresses for the universal interrupt controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. Signed-off-by: Jeff Mann <mannj@embeddedplanet.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.Stefan Roese2006-11-28-0/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the code and configuration necessary to boot with an arch/powerpc Linux kernel. Signed-off-by: Grant Likely <grant.likely@gmail.com> Acked-by: Jon Loeliger <jdl@freescale.com>
| * | | [PATCH] PPC4xx: 440SP Rev. C detection addedStefan Roese2006-11-28-0/+5
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * | | [PATCH] nand: Fix patch merge problemStefan Roese2006-11-28-2/+2
| | |/ | |/| | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | Clean up the code according to codestyle:roy zang2006-12-01-1794/+1747
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (1) remove some C++ comments. (2) remove trailing white space. (3) remove trailing empty line. (4) Indentation by table. (5) remove {} in one line condition. (6) add space before '(' in function call. Remove some weird printf () output. Add necessary comments. Modified Makefile to support building in a separate directory.
* | | Solve the copyright conflicts when merging 'master' into hpc2.roy zang2006-11-29-222/+2368
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | Merge branch 'master' into hpc2 Conflicts: drivers/cfi_flash.c
| * | Merge with /home/sr/git/u-boot/denx-alpr-merge-testWolfgang Denk2006-11-27-56/+1913
| |\ \
| | * | [PATCH] 4xx: Fix problem with board specific reset code (now for real)Stefan Roese2006-11-27-1/+2
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | [PATCH] alpr: remove unused board specific flash driverStefan Roese2006-11-27-70/+0
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-12-29 15:08:30 +0000