summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* env: Use getenv_yesno() more generallyJoe Hershberger2012-12-13-79/+56
| | | | | | | Move the getenv_yesno() to env_common.c and change most checks for 'y' or 'n' to use this helper. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* env: Refactor apply into change_okJoe Hershberger2012-12-13-55/+72
| | | | | | | | | | | | | | | | Move the read of the old value to inside the check function. In some cases it can be avoided all together and at the least the code is only called from one place. Also name the function and the callback to more clearly describe what it does. Pass the ENTRY instead of just the name for direct access to the whole data structure. Pass an enum to the callback that specifies the operation being approved. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* env: Consolidate common code in hsearch_r()Joe Hershberger2012-12-13-34/+37
| | | | | | | The same chunk of code was replicated in two places and the following changes will make that chunk grow a bit, so combine into a static func. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* env: Refactor do_apply to a flagJoe Hershberger2012-12-13-56/+49
| | | | | | | | | | Use a flag in hsearch_r for insert mode passed from import to allow the behavior be different based on use. Now that "do_check" is called for all imports, ensure console init is complete before updating the console on relocation import Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* Make linux kernel string funcs available to toolsJoe Hershberger2012-12-13-43/+61
| | | | | | | | | | isspace() and strim() are not in the typical user-mode string.h, so put them in a separate compilation unit so that they can be built into tools that need them independent of the other common string functions. This allows code shared by u-boot and the linux user-mode tools to link. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* gpt: Enable support for GPT partition table restoration at Samsung's TratsLukasz Majewski2012-12-13-1/+27
| | | | | | | | | Enable support for GPT partition table restoration at Samsung's Trats development board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
* gpt: Support for new "gpt" commandPiotr Wilczek2012-12-13-0/+334
| | | | | | | | | | New command - "gpt" is supported. It restores the GPT partition table. It looks into the given environment variable for partitions definition. It can be enabled at target configuration file with CONFIG_CMD_GPT. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* gpt: Support for GPT (GUID Partition Table) restorationLukasz Majewski2012-12-13-3/+330
| | | | | | | | | The restoration of GPT table (both primary and secondary) is now possible. Function 'gpt_restore' presents example of partition restoration process. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* gpt: The leXX_to_int() calls replaced with ones defined at <compiler.h>Chang Hyun Park2012-12-13-114/+88
| | | | | | | | | | | | Custom definitions of le_XX_to_int functions have been replaced with standard ones, defined at <compiler.h> Replacement of several GPT related structures members with ones indicating its endianness and proper size. Signed-off-by: Chang Hyun Park <heartinpiece@outlook.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* gpt:doc: GPT (GUID Partition Table) documentationLukasz Majewski2012-12-13-0/+201
| | | | | | | Documentation of the GPT format. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* part:efi: Move part_efi.h file to ./includeLukasz Majewski2012-12-13-0/+0
| | | | | | | | | | This move is necessary to export gpt header and GPT partition entries to be used with other commands or subsystems. Additionally the part_efi.h file has been cleaned-up to supress checkpatch's warnings. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* vsprintf:fix: Change type returned by ustrtoulLukasz Majewski2012-12-13-2/+2
| | | | | | | | | | | The ustrtoul shall convert string defined size (e.g. 1GiB) to unsigned long type (as its name implies). Up till now it had returned int, which might cause problems with large numbers (GiB range), when interpreted as U2 signed numbers. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2012-12-12-1/+4
|\
| * mips: serial: Fix busted manual relocationJoe Hershberger2012-12-12-0/+3
| | | | | | | | | | | | | | | | | | serial_initialize() must be called after relocation to adjust the pointers to putc(), getc(), etc. This is busted ever since the serial driver-model-ification series. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * MIPS: constify mips_io_port_baseDaniel Schwierzeck2012-12-12-1/+1
| | | | | | | | | | | | | | mips_io_port_base is exported as 'extern const unsigned long mips_io_port_base;' in arch/mips/include/asm/io.h. Thus make the variable const too. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | cmd:spl:fix: Prevent from a build error on boards, which don't support FDTŁukasz Majewski2012-12-11-0/+2
| | | | | | | | | | | | | | | | Do not compile in FDT related code, when it is not supported. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | exynos: Enable hashing functions and EDID for smdk5250Simon Glass2012-12-11-0/+7
| | | | | | | | | | | | | | Enable SHA1/SHA256 hashing and the hash command. Also enable EDID support for reading from an LCD. Signed-off-by: Simon Glass <sjg@chromium.org>
* | tpm: Add TPM stress testLuigi Semenzato2012-12-11-6/+87
| | | | | | | | | | | | | | | | Add a simple command to stress-test a TPM (Trusted Platform Module). Signed-off-by: Luigi Semenzato <semenzato@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | console: Enable function to display console infoSimon Glass2012-12-11-2/+4
| | | | | | | | | | | | | | | | | | | | | | The CONFIG_SYS_CONSOLE_INFO_QUIET option should suppress the console information, but allow boards to display it later if required. Adjust the code to support this. This is used to avoid printing the information while the LCD display is not ready, since it only becomes ready when stdio init is complete. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add console command to access io space registersVadim Bendebury2012-12-11-4/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide u-boot console functions to access IO space registers. A no thrills implementation, accessing one register at a time. For example: boot > iod 80 0080: 00000094 boot > iod.w 80 0080: 0094 boot > iod.b 80 0080: 94 boot > iow.b 0x80 12 boot > iod 0x80 0080: 00000012 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | fdt: edid: Enable fdt_add_edid() function when CONFIG_LCD definedTom Wai-Hong Tam2012-12-11-1/+1
| | | | | | | | | | | | | | This function can be used for LCDs as well as monitors. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | edid: Add I2C command for printing the EDIDTom Wai-Hong Tam2012-12-11-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a single command to read the EDID information over I2C. For example: SMDK5250 # i2c dev 7 Setting bus to 7 SMDK5250 # i2c edid 50 EDID version: 1.4 Product ID code: 305c Manufacturer: AUO Serial number: 00000000 Manufactured in week: 0 year: 2011 Video input definition: digital signal, voltage level 0, blank to black Monitor is non-RGB Maximum visible display size: 26 cm x 14 cm Power management features: no active off, no suspend, no standby Estabilished timings: Standard timings: 1366x768 60 Hz (detailed) 1366x768 60 Hz (detailed) Monitor ID: 2VD2K.B116XW Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | edid: Library of EDID decode and printTom Wai-Hong Tam2012-12-11-0/+583
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This implements a library for accessing EDID data from an LCD panel. This is used to obtain information about the panel such as its resolution and type. This is a tidied-up version of the original code pulled from https://github.com/ynezz/u-boot-edid. The changes we made are: - removed bit fields in the struct; - removed endianness cases in the struct; - fixed some wrong definitions; - fixed to fit 80 columns; - fixed some code styles. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add hash command to perform hashing using various algorithmsSimon Glass2012-12-11-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new command supports hashing SHA1 and SHA256. It could be extended to others such as MD5 and the CRC algorithms. The syntax is modeled on those: hash <algorithm> <address> <length> [*<dest_addr> | <dest_envvar>] to calculate a hash, and: hash -v <algorithm> <address> <length> [*<verify_addr> | <verify_envvar>] to verify a hash. Use CONFIG_CMD_HASH to enable the command, CONFIG_SHA1 to enable SHA1 and CONFIG_SHA256 to enable SHA256. The existing sha1sum command remains. Signed-off-by: Simon Glass <sjg@chromium.org>
* | sha1sum: Use generic hash layerSimon Glass2012-12-11-125/+4
| | | | | | | | | | | | Update the code to use the hash layer instead of local code. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add generic hash APISimon Glass2012-12-11-0/+291
| | | | | | | | | | | | | | | | We have a SHA1 command and want to add a SHA256 command also. Instead of duplicating the code, create a generic hash API which can process commands for different algorithms. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add strcasecmp() and strncasecmp()Simon Glass2012-12-11-9/+20
| | | | | | | | | | | | | | | | | | | | | | strncasecmp() is present as strnicmp() but disabled. Make it available and define strcasecmp() also. There is a only a small performance penalty to having strcasecmp() call strncasecmp(), so do this instead of a standalone function, to save code space. Update the prototype in arch-specific headers as needed to avoid warnings. Signed-off-by: Simon Glass <sjg@chromium.org>
* | sha256: Use const where possible and add watchdog functionSimon Glass2012-12-11-3/+42
| | | | | | | | | | | | | | | | | | In preparation for making the hash function common, we may as well use const where we can. Also add a watchdog version of the hashing function. Signed-off-by: Simon Glass <sjg@chromium.org>
* | sha1: Use const where possible, and unsigned for input lenSimon Glass2012-12-11-25/+20
| | | | | | | | | | | | | | | | In preparation for making the hash function common, we may as well use const where we can. Also the input length cannot be negative, but may be very large, so use unsigned. Signed-off-by: Simon Glass <sjg@chromium.org>
* | stdio: remove useless strncpyVincent Palatin2012-12-11-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The name is already copied when we memcpy() the whole structure. This is because struct stdio_dev has this field: char name[16]; /* Device name */ So the data is inline, rather than being a pointer. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | Fix use of conditional LMBSimon Glass2012-12-11-1/+1
| | | | | | | | | | | | This code was not guarded with CONFIG_LMB so failed to build on x86. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add a command to read raw blocks from a partitionKenneth Waters2012-12-11-0/+84
| | | | | | | | | | | | | | | | | | | | Sometimes data is on a block device and within a partition, but not in a particular filesystem. This commands permits reading raw data from a partition. Signed-off-by: Kenneth Waters <kwaters@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add gettime commandAnton Staaf2012-12-11-0/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gettime returns the current timer value. If CONFIG_SYS_HZ is defined then the timer value is also converted to seconds. Tegra20 (SeaBoard) # gettime Timer val: 7754 Seconds : 7 Remainder : 754 sys_hz = 1000 There has been some discussion about whether this is useful enough to be included in U-Boot. The following boards do not have CONFIG_SYS_HZ defined: M52277EVB M52277EVB_stmicro M53017EVB M54418TWR M54418TWR_nand_mii M54418TWR_nand_rmii M54418TWR_nand_rmii_lowfreq M54418TWR_serial_mii M54418TWR_serial_rmii Signed-off-by: Anton Staaf <robotboy@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | Add new bootstage step for the main loopSimon Glass2012-12-11-0/+2
| | | | | | | | | | | | Mark when we get to the main loop. Signed-off-by: Simon Glass <sjg@chromium.org>
* | gpio: remove duplicate function signatureNikita Kiryanov2012-12-11-13/+4
| | | | | | | | | | | | | | gpio_request() appears twice in asm-generic/gpio.h Remove one of the definitions. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* | designware_i2c.h: Define IC_CLK only if not already defined in config fileArmando Visconti2012-12-11-0/+2
| | | | | | | | Signed-off-by: Armando Visconti <armando.visconti@st.com>
* | designware_i2c.h: Fixed the correct values for SCL low/high timeArmando Visconti2012-12-11-3/+3
| | | | | | | | Signed-off-by: Armando Visconti <armando.visconti@st.com>
* | designware_i2c: Fixed the setting of the i2c bus speedArmando Visconti2012-12-11-15/+13
| | | | | | | | | | | | | | | | There are three couple (hcnt/lcnt) of registers for each speed (SS/FS/HS). The driver needs to set the proper couple of regs according to what speed we are setting. Signed-off-by: Armando Visconti <armando.visconti@st.com>
* | designware_i2c: Added s/w generation of stop bitArmando Visconti2012-12-11-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the newer versions of designware i2c IP there is the possibility of configuring it with IC_EMPTYFIFO_HOLD_MASTER_EN=1, which basically requires the s/w to generate the stop bit condition directly, as the h/w will not automatically generate it when TX_FIFO is empty. To avoid generation of an extra 0x0 byte sent as data, the IC_STOP command must be sent along with the last IC_CMD. This patch always writes bit[9] of ic_data_cmd even in the older versions, assuming that it is a noop there. Signed-off-by: Armando Visconti <armando.visconti@st.com>
* | designware_i2c.c: Added the support for MULTI_BUSArmando Visconti2012-12-11-1/+81
| | | | | | | | | | | | | | This patch adds the capability to switch between 10 different I2C busses (from 0 to 9). Signed-off-by: Armando Visconti <armando.visconti@st.com>
* | drivers:i2c: Modify I2C driver for Exynos4Piotr Wilczek2012-12-11-7/+12
| | | | | | | | | | | | | | | | This patch modifies the S3C i2c driver to support both Exynos4 and Exynos5 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
* | exynos:pinmux: Add pinmux support for i2cPiotr Wilczek2012-12-11-0/+64
| | | | | | | | | | | | | | | | This patch add pinmux for I2C for Exynos4 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
* | exynos:cpu: Add Exynos4 I2C spacingPiotr Wilczek2012-12-11-0/+2
| | | | | | | | | | | | | | | | This patch add the spacing for i2c for Exynos4 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
* | exynos:clock: Add i2c clockPiotr Wilczek2012-12-11-0/+17
| | | | | | | | | | | | | | | | This patch adds i2c clock for Exynos4 Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com>
* | omap24xx_i2c: Handle OMAP5 like OMAP2,3,4Vincent Stehlé2012-12-11-5/+10
| | | | | | | | | | | | | | | | | | | | | | OMAP5 has 8b i2c data register field, like OMAP2, 3 and 4. Handle in the same way. This fixes the following error on OMAP5: OMAP5430 EVM # mmc rescan timed out in wait_for_bb: I2C_STAT=1410 twl6035: could not turn on LDO9. Signed-off-by: Vincent Stehlé <v-stehle@ti.com>
* | mxs: i2c: Implement algorithm to set up arbitrary i2c speedMarek Vasut2012-12-11-53/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This algorithm computes the values of TIMING{0,1,2} registers for the MX28 I2C block. This algorithm was derived by using a scope, but the result seems correct. The resulting values programmed into the registers do not correlate with the contents in datasheet. When using the values from the datasheet, the I2C clock were completely wrong. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Wolfgang Denk <wd@denx.de>
* | mxs: i2c: Restore speed setting after block resetMarek Vasut2012-12-11-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | The I2C block reset configures the I2C bus speed to strange value. Read the I2C speed from the block before reseting the block and restore it afterwards, so the I2C operates correctly. This issue can be replicated by doing unsuccessful I2C transfer, after such transfer finishes, the I2C block clock speed is misconfigured. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | i2c: mxs: Fix TIMING2 register valueMarek Vasut2012-12-11-2/+2
| | | | | | | | | | | | | | | | | | | | | | According to FSL, the value in the TIMING2 register shall be 0x00300030 instead of what's written in the datasheet. This new value correlates with older STMP36xx datasheet. Issues were detected in Linux when this register was misconfigured, so write this correct value. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | i2c: mxs: Use i2c_set_bus_speed() in i2c_init()Marek Vasut2012-12-11-15/+1
| | | | | | | | | | | | | | | | | | Use i2c_set_bus_speed() in i2c_init() within the mxs i2c driver to avoid duplication of code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | i2c: mxs: Implement i2c_get/set_bus_speed()Marek Vasut2012-12-11-0/+45
| | | | | | | | | | | | | | | | | | This patch implements the setup and retrieval functions for the I2C bus speed on the MXS I2C IP. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-12-23 16:56:53 +0000