summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Blackfin: re-use board data in cpu bannerMike Frysinger2010-08-11-1/+2
| | | | | | | The bi_cpu field of the board data is already set to the relevant cpu string, so there is no need for us to use the define directly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: cm-bf548: increase monitor lenMike Frysinger2010-08-11-1/+1
| | | | | | | Recent features enabled by default require a larger monitor size for the cm-bf548 port, so bump it up a bit. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: shutdown video DMA when booting LinuxMichael Hennerich2010-08-11-0/+38
| | | | | | | | | | | In case there is no frame buffer driver present in Linux to hand over the PPI LCD DMA upon boot, the DMA initiated by u-boot to display the splash screen runs unattended. Therefore always stop the video driver in u-boot before starting Linux. If people don't want this behavior, then they can simply stub out the video_stop() function in their board video driver. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* disk/part.c: 'usb storage' avoiding overflow when output capacitySergei Trofimovich2010-08-10-5/+23
| | | | | | | | | | | | | | | Before: Marvell>> usb storage Device 0: Vendor: StoreJet Rev: Prod: Transcend Type: Hard Disk Capacity: 28759.9 MB = 28.0 GB (488397168 x 512) After: Marvell>> usb storage Device 0: Vendor: StoreJet Rev: Prod: Transcend Type: Hard Disk Capacity: 238475.1 MB = 232.8 GB (488397168 x 512) Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-08-10-136/+2339
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-08-10-2/+2
| |\
| | * MX51EVK: fix return value of get_timer_maskedLi Haibo2010-08-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_timer_masked() should return current timestamp, not current ticks from hardware register. Tested on one custom board with NAND flash. Without this patch, NAND write always TIMEOUT because get_timer(0) return a big value. This patch applies for u-boot-2010.06 Signed-off-by: Li Haibo <hbli@sinocastel.com>
| | * fix cmd_mmc.c, line 136 missing "Reinhard Meyer2010-08-10-1/+1
| | | | | | | | | | | | | | | | | | Remove warning for missing " at the end of line 136 Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | orion5x: allow overriding default mappings windowsAlbert Aribaud2010-08-10-41/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Turn all ORION5X_DEF{ADR,SZ}_xxx macros into ORION5X_{ADR,SZ}_xxx and allow defining them from board code to override defaults. This is particularly useful for defining board-specific FLASH address and size in board header file rather than having to tweak orion5x code. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk2010-08-10-13/+247
| |\ \
| | * | Kirkwood: openrd_base: Added SATA supportPrafulla Wadaskar2010-08-08-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables mvsata driver and related filesystem support. The patch is tested for ide reset and ext2ls operation for a disk drive connected on SATA port0. This patch depends upon the patche-series http://lists.denx.de/pipermail/u-boot/2010-August/074908.html Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * | cmd_ide: add support for KirkwoodPrafulla Wadaskar2010-08-08-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added MVSATAC definitions to Kirkwood. Added support for Kirkwood in cmd_ide. Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * | edminiv2: add mvsata_ide and cmd_ide supportAlbert Aribaud2010-08-08-1/+33
| | | | | | | | | | | | | | | | | | | | | | | | Add mvsata_ide and cmd_ide configuration in edminiv2 config Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| | * | cmd_ide: add support for orion5xAlbert Aribaud2010-08-08-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MVSATAHC definitions to orion5x. Add support for orion5x in cmd_ide. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| | * | ide: add mvsata_ide driverAlbert Aribaud2010-08-08-0/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver only provides initialization code; actual driving is done by cmd_ide.c using the ATA compatibility mode of the Marvell SATAHC controller. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| | * | ide: reorder object files alphabeticallyAlbert Aribaud2010-08-08-3/+3
| | | | | | | | | | | | | | | | Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| | * | ide: add configurationAlbert Aribaud2010-08-08-9/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_IDE_SWAP_IO This configuration option replaces a complex conditional in cmd_ide.c with an explicit define to be added to SoC or board configs. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-tiWolfgang Denk2010-08-10-25/+1210
| |\ \ \
| | * | | ARMV7: Update default environment for OMAP4 boardsSteve Sakoman2010-08-05-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specify vram on command line, remove erroneous call to nandboot in the boot script, add CONFIG_BOOTDELAY Signed-off-by: Steve Sakoman <steve@sakoman.com> Acked-by: Nishanth Menon <menon.nishanth@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | | ARMV7: Enable musb driver and usbtty on OMAP4 PandaSteve Sakoman2010-08-05-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | | ARMV7: Enable musb driver and usbtty on OMAP4430 SDPSteve Sakoman2010-08-05-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | | ARMV7: Restructure omap3 musb driver to allow code sharing between OMAP3 and ↵Steve Sakoman2010-08-05-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP4 Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | | ARMV7: Add support for the TWL6030 I2C power chip used in OMAP4 systemsSteve Sakoman2010-08-05-0/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add the basic infrastructure for the TWL6030 driver and enables support in the two existing OMAP4 boards, Panda and OMAP4430 SDP Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | | ARMV7: Modify i2c driver for more reliable operation on OMAP4Steve Sakoman2010-08-05-11/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies the init routine to follow the TRM recommendations. It also modifies the i2c_read_byte function to reflect subtle differences between the i2c controller in OMAP3 and OMAP4. Signed-off-by: Steve Sakoman <steve@sakoman.com> Acked-by: Nishanth Menon <menon.nishanth@gmail.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | | ARMV7: Fix udelay for OMAP4Steve Sakoman2010-08-05-11/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OMAP4 x-load code sets gptimer1 clock source to 32Khz. This isn't acceptable for udelay. This patch changes from gptimer1 to gptimer2, which uses sys_clk at 38.4 Mhz. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | | ARMV7: Add pad mux support for OMAP4Steve Sakoman2010-08-05-0/+942
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add functional multiplexing support for OMAP4 pads. Configure all the pads for the OMAP4430 SDP and OMAP4 Panda boards Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | | Merge branch 'master' of ../masterWolfgang Denk2010-08-10-866/+683
| |\ \ \ | | | |/ | | |/|
| * | | ARM: Define __raw_readX and __raw_writeXMarek Vasut2010-08-07-6/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | These functions are undefined on ARM when using __io. These are the commonly used versions and can be redefined. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * | | Merge branch 'master' of /home/wd/git/u-boot/masterWolfgang Denk2010-08-07-95109/+4121
| |\ \ \ | | |_|/ | |/| |
| * | | Merge branch 'master' of git://git.denx.de/u-boot-samsungWolfgang Denk2010-08-04-2/+597
| |\ \ \
| | * | | s5p_goni: enable mmc0Minkyu Kang2010-08-03-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the board_mmc_init function and enable the mmc command Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| | * | | S5P: support mmc driverMinkyu Kang2010-08-03-0/+552
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support mmc driver for s5p SoC Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| | * | | SAMSUNG: serial: remove compiler warningsMinkyu Kang2010-07-09-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | remove below warnings serial_s5p.c: In function 'serial_getc_dev': serial_s5p.c:136: warning: dereferencing type-punned pointer will break strict-aliasing rules serial_s5p.c: In function 'serial_putc_dev': serial_s5p.c:152: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| | * | | Merge branch 'master' of git://git.denx.de/u-bootMinkyu Kang2010-07-06-23873/+8238
| | |\ \ \
| | * \ \ \ Merge branch 'master' of git://git.denx.de/u-boot-armMinkyu Kang2010-06-15-227/+4202
| | |\ \ \ \
| | * | | | | SAMSUNG: goni: add the GPL licenceMinkyu Kang2010-06-09-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tom <Tom@bumblecow.com>
| | * | | | | s5pc1xx: Add support for Samsung Goni boardMinkyu Kang2010-06-03-4/+1237
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| | * | | | | s5pc1xx: gpio: bug fix at gpio_set_pull functionMinkyu Kang2010-05-31-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When set to PULL_NONE, gpio_set_pull function is returned without write the register. This patch fixed it. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | | | | Merge branch 'master' of git://git.denx.de/u-boot-armMinkyu Kang2010-05-31-1775/+11352
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/mach-types.h Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * \ \ \ \ \ Merge branch 'master' of git://git.denx.de/u-boot-armMinkyu Kang2010-05-17-90/+935
| | |\ \ \ \ \ \
| | | * | | | | | Add SPI support to mx51evk boardStefano Babic2010-05-10-0/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds SPI devices to the mx51evk board. The MC13892 chip (PMIC) is supported. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | | * | | | | | MX: Added definition file for MC13892Stefano Babic2010-05-10-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MC13892 is a Power Controller used with processors of the family MX.51. The file adds definitions to be used to setup the internal registers via SPI. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | | * | | | | | SPI: added support for MX51 to mxc_spiStefano Babic2010-05-10-20/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add SPI support for the MX51 processor. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | | * | | | | | MX31: Add support for PMIC to the QONG moduleStefano Babic2010-05-10-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the PMIC (MC13783) controller and enables charging of the RTC battery. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | | * | | | | | MX: RTC13783 uses general function to access PMICStefano Babic2010-05-10-67/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The RTC is part of the Freescale's PMIC controller. Use general function to access to PMIC internal registers. Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
| | | * | | | | | MX: Added Freescale Power Management DriverStefano Babic2010-05-10-0/+329
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch add supports for the Freescale's Power Management Controller (known as Atlas) used together with i.MX31/51 processors. It was tested with a MC13783 (MX31) and MC13892 (MX51). Signed-off-by: Stefano Babic <sbabic@denx.de>
| | | * | | | | | i.MX31: Activate NAND support for i.MX31 Litekit board.Magnus Lilja2010-05-10-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| | | * | | | | | MX51: Fix MX51 CPU detect messageFabio Estevam2010-05-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix MX51 CPU detect message. Original string was: CPU: Freescale i.MX51 family 3.0V at 800 MHz which can be misinterpreted as 3.0 Volts instead of the silicon revision. ,change it to: CPU: Freescale i.MX51 family rev3.0 at 800 MHz Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | | * | | | | | MX51evk: Removed warningsStefano Babic2010-05-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes reflect modifications in the fsl_esdhc driver (the clk_enable field war removed in the configuration structure). Signed-off-by: Stefano Babic <sbabic@denx.de>
| | | * | | | | | tx25: fix crash while booting LinuxAnatolij Gustschin2010-05-10-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently booting Linux on TX25 board doesn't work since there is no correct mach-id and boot parameters setup for tx25 board. Fix it now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: John Rigby <jcrigby@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-12-30 19:10:08 +0000