summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
...
* ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing2012-08-31-0/+53
* ENGR00221503-1 cmd_imxotp: refine the help of this command.Zhang Jiejing2012-08-31-5/+10
* ENGR00222005 mfgtool can't work on mx6slrel_imx_3.0.35_12.09.02Tony LIU2012-08-30-1/+316
* ENGR00219316-2: mx6q sabreauto enable lvds backlight by defaultAdrian Alonso2012-08-29-25/+32
* ENGR00219316-1: mx6 sabreauto: enable mxc_gpio supportAdrian Alonso2012-08-29-9/+20
* ENGR00221013 MX6 SabreSD:Disable LVDS panel CABC functionLiu Ying2012-08-28-0/+38
* ENGR00221332: U_BOOT: remove "boot" and "enable" from configs' nameTerry Lv2012-08-24-7/+7
* ENGR00221135: imx6x: clear PowerDown Enable bit of WDOG1_WMCRRobby Cai2012-08-24-4/+45
* ENGR00221150 Support spi-nor on manufacturing toolimx-android-r13.4-betaAlejandro Sierra2012-08-22-0/+590
* ENGR00220824: mx6sl_evk: mmc: only SD1 supports 8bit on evk board.Ryan QIAN2012-08-21-6/+2
* ENGR00180538-1 MFG download burn sd,spi, nand, nor failed.Francisco Munoz2012-08-21-9/+1330
* ENGR00217505-8 uboot: MX6Q-ARD: set the default gpmi clock to 20MHzHuang Shijie2012-08-20-3/+2
* ENGR00217505-7 uboot: gpmi: update the mtd->ecc_stats when reading page failedHuang Shijie2012-08-20-3/+8
* ENGR00217505-6 uboot: gpmi: set default value for busy_timeoutHuang Shijie2012-08-20-0/+5
* ENGR00217505-5 uboot: gpmi: update the ecc_strength codeHuang Shijie2012-08-20-66/+160
* ENGR00217505-4 uboot: gpmi: replace the gpmi_nfc_reset_block()Huang Shijie2012-08-20-77/+96
* ENGR00217505-3 uboot: gpmi: use the community's nand chip databaseHuang Shijie2012-08-20-108/+19
* ENGR00217505-2 uboot: mtd: update nand_get_flash_type()Huang Shijie2012-08-20-33/+325
* ENGR00217505-1 uboot: MX6Q-ARD: add a NAND boot configHuang Shijie2012-08-20-0/+272
* ENGR00220486 Modify ODT values for Solo AIAlejandro Sierra2012-08-20-4/+4
* ENGR00220161: imx6sl: Add MX6SL EVK SupportRobby Cai2012-08-14-0/+2567
* ENGR00220164 pfuze:rise VDDARM_IN to 1.425V and work around pfuze1.0Robin Gong2012-08-13-0/+45
* ENGR00220076 fix the fastboot usb re-connect issueLiGang2012-08-10-0/+8
* ENGR00219854-1 Enable fastboot feature on mx6q-arm2 boardLiGang2012-08-09-7/+54
* ENGR00219636 MX6 UBOOT : Enlarge command line buffer sizeEric Sun2012-08-07-11/+12
* ENGR00218915-2 MX6 SabreSD:Use new 8bit bmp boot logoLiu Ying2012-08-03-5/+5
* ENGR00218915-1 FSL common:Add new boot logoLiu Ying2012-08-03-1/+30159
* ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authenticationEric Sun2012-08-01-24/+26
* ENGR00218583-5 MX6DL SabreSD Android:Add splashimage uboot varLiu Ying2012-07-31-1/+4
* ENGR00218583-4 MX6Q SabreSD Android:Add splashimage uboot varLiu Ying2012-07-31-2/+4
* ENGR00218583-3 MX6DL SabreSD:Enable splashimage by defaultLiu Ying2012-07-31-0/+1
* ENGR00218583-2 MX6Q SabreSD:Enable splashimage by defaultLiu Ying2012-07-31-0/+1
* ENGR00218583-1 MX6Q/DL SabreSD:Support LVDS1 splashimageLiu Ying2012-07-31-0/+9
* ENGR00218805 imx6: print the silicon revision correctlyJason Liu2012-07-30-11/+4
* ENGR00218465 Android: mx6sl-arm2: fix fastboot crash issueLiGang2012-07-30-8/+19
* ENGR00217401 common: fix build warningXinyu Chen2012-07-26-11/+21
* ENGR00218282 MX6Q: fix linker error when more configure enabled.Zhang Jiejing2012-07-25-6/+10
* ENGR00218067 mx6sl LDO_BYPASS: enable LDO BYPASS in mx6sl by defaultRobin Gong2012-07-24-1/+1
* ENGR00217764 MX6 Secure Boot : Fix NAND BOOT Failure due to secure patchEric Sun2012-07-23-10/+20
* ENGR00217381-02: show sd/mmc clk freq for mmcinfoRyan QIAN2012-07-19-1/+2
* ENGR00217381-01: mx6sl add sd1 and sd2 to support SD3.0Ryan QIAN2012-07-19-2/+2
* ENGR00217114-2 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun2012-07-13-5/+6
* ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun2012-07-13-171/+206
* ENGR00216852 MX6SL ARM2, UBoot : Apply V0.93 LPDDR2 ScriptEric Sun2012-07-13-17/+20
* ENGR00215197 pfuze MX6SL_ARM2: enable LDO bypass on u-bootimx-android-r13.5-alphaRobin Gong2012-07-04-0/+329
* ENGR00215367 MX6 Platforms, remove "nosmp" in default parametersEric Sun2012-07-03-4/+2
* ENGR00215633 MX6DL LPDDR2 : enable plugin mode of system bootEric Sun2012-07-03-8/+590
* ENGR00215515 MX6: Move IPU QoS and VDOA/IPU/VPU AXI Cache config to kernelWayne Zou2012-07-02-70/+18
* ENGR00214947 MX6 UBOOT : default enable wait mode as default parametersEric Sun2012-06-26-8/+6
* ENGR00214866 MX6SL ARM2, UBoot : Apply V0.91 LPDDR2 ScriptEric Sun2012-06-26-463/+397