summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Fix missing drivers makefile entries ds1722.c mw_eeprom.cJean-Christophe PLAGNIOL-VILLARD2007-10-23-5/+6
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Fix warning differ in signedness in board/innokom/innokom.cJean-Christophe PLAGNIOL-VILLARD2007-10-23-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* fix pxa255_idp boardMarcel Ziswiler2007-10-23-55/+60
| | | | | | | | | | | | | | | | | | | | | | | The pxa255_idp being an old unmaintained board showed several issues: 1. CONFIG_INIT_CRITICAL was still defined. 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. 3. Symbol flash_addr was undeclared. 4. The boards lowlevel_init function was still called memsetup. 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. 6. Using -march=armv5 instead of -march=armv5te resulted in lots of 'target CPU does not support interworking' warnings on recent compilers. 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as indexes rather than the register definitions from the pxa-regs header file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to avoid any ambiguities. 8. There were several redefinition warnings concerning ICMR, OSMR3, OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. 9. The board configuration file was rather outdated. 10. The part header file defined the vendor, product and revision arrays as unsigned chars instead of just chars in the block_dev_desc_t structure. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* Make MPC8266ADS command selection more robustRune Torgersen2007-10-23-33/+20
| | | | | | Fix MPC8266 command line definition so it won't break when new commands are added to u-boot. Signed-off-by Rune Torgersen <runet@innovsys.com>
* Minor coding style cleanup; update CHANGELOGWolfgang Denk2007-10-21-17/+259
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix NE2000 driver:Vlad Lungu2007-10-21-24/+14
| | | | | | | | | | Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try to do anything in eth_stop() if eth_init() was not called. Simplified RX path in order to avoid timeouts on really really fast NE2000 cards (read: qemu with internal tftp), NetLoop() is clever enough to cope with 1 packet per eth_rx(). Signed-off-by: Vlad Lungu <vlad@comsys.ro>
* Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk2007-10-21-31/+47
|\
| * TQM860M: adjust for doubled flash sector size.Martin Krause2007-10-15-4/+9
| | | | | | | | | | | | | | Adjust flash map to support the new S29GLxxN (N-Type) Flashes with doubled sector size. Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * TQM8xx: Fix CAN timing.Jens Gehrlein2007-10-15-7/+9
| | | | | | | | Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * TQM866M: fix SDRAM refreshMartin Krause2007-10-15-16/+20
| | | | | | | | | | | | | | | | | | | | | | | | At 133 MHz the current SDRAM refresh rate is too fast (measured 4 * 1.17 us). CFG_MAMR_PTA changes from 39 to 97. This result in a refresh rate of 4 * 7.8 us at the default clock 50 MHz. At 133 MHz the value will be then 4 * 2.9 us. This is a compromise until a new method is found to adjust the refresh rate. Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * TQM866M: adjust for doubled flash sector size.Martin Krause2007-10-15-4/+9
| | | | | | | | | | | | | | Adjust flash map to support the new S29GLxxN (N-Type) Flashes with doubled sector size. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | Merge branch 'master' of /home/git/u-boot/Wolfgang Denk2007-10-21-66/+135
|\ \
| * | Fix two typos.Detlev Zundel2007-10-19-2/+2
| | | | | | | | | | | | Signed-off-by: Detlev Zundel <dzu@denx.de>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2007-10-18-1/+7
| |\ \
| | * | ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap commandStefan Roese2007-10-18-1/+7
| | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * | | mpc83xx: Add configure entry for MPC83xx ATM supportTony Li2007-10-18-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into Makfile and MAKEALL Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | mpc83xx: pq-mds-pib.c typo errorTony Li2007-10-18-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct to val8 from val. Signed-off-by: Tony Li <tony.li@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | Merge git://www.denx.de/git/u-bootKim Phillips2007-10-18-516/+3477
| |\ \ \ | | |/ /
| | * | Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/masterWolfgang Denk2007-10-16-9/+21
| | |\ \
| | * \ \ Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2007-10-15-40/+72
| | |\ \ \
| | | * \ \ Merge branch 'master' of git://www.denx.de/git/u-boot-usbWolfgang Denk2007-10-15-40/+72
| | | |\ \ \
| | | | * | | Bugfix: Use only one PTD for one endpointTimo Ketola2007-10-02-40/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Original isp116x-hcd code prepared multiple PTDs for longer than 16 byte transfers for one endpoint. That is unnecessary because the ISP116x is able to split long data from one PTD into multiple transactions based on the buffer size of the endpoint. It also caused serious problems if the endpoint NAKed some of the transactions. In that case ISP116x wouldn't notice that the other PTDs were for the same endpoint and would try the other PTDs possibly out of order. That would break the whole transfer. This patch makes isp116x_submit_job to use one PTD for one transfer. Signed-off-by: Timo Ketola <timo.ketola@exertus.fi> Signed-off-by: Markus Klotzbuecher <mk@denx.de>
| | * | | | | Merge branch 'master' of git+ssh://gemini_vpn/home/wd/git/u-boot/masterWolfgang Denk2007-10-15-0/+16
| | |\ \ \ \ \ | | | |/ / / / | | |/| | | |
| | * | | | | ppc4xx: Fix bug in I2C bootstrap values for Sequoia/RainierStefan Roese2007-10-15-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C bootstrap values that can be setup via the "bootstrap" command, were setup incorrect regarding the generation of the internal sync PCI clock. The values for PLB clock == 133MHz were slighly incorrect and the values for PLB clock == 166MHz were totally incorrect. This could lead to a hangup upon booting while PCI configuration scan. This patch fixes this issue and configures valid PCI divisor values for the sync PCI clock, with respect to the provided external async PCI frequency. Here the values of the formula in the chapter 14.2 "PCI clocking" from the 440EPx users manual: AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz 33MHz async PCI frequency: PLB = 133: => 32 <= 44.3 <= 65 (div = 3) PLB = 166: => 32 <= 55.3 <= 65 (div = 3) 66MHz async PCI frequency: PLB = 133: => 65 <= 66.5 <= 132 (div = 2) PLB = 166: => 65 <= 83 <= 132 (div = 2) Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | | ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & YosemiteStefan Roese2007-10-15-5/+13
| | | |_|_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | Merge branch 'master' of git://www.denx.de/git/u-bootKim Phillips2007-09-24-175/+626
| |\ \ \ \ \
| * | | | | | Update MPC8349ITX*_config to place config.tmp in right place.Sam Sparks2007-09-14-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPC834ITX*_config does not store config.tmp at the correct locatation, causing MPC8349ITXGP to have the wrong TEXT_BASE. Signed-off-by: Sam Sparks <SSparks@twacs.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | | | | | | Make MPC8266ADS board compile again.runet@innovsys.com2007-10-16-0/+2
| |_|_|_|_|/ |/| | | | | | | | | | | | | | | | | Signed-off-by: Runet Torgersen <runet@innovsys.com>
* | | | | | 86xx: Allow for fewer DDR slots per memory controller.Jon Loeliger2007-10-16-9/+21
| |_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a direct correlation exists between DDR DIMM slots and SPD EEPROM addresses used to configure them, use the individually defined SPD_EEPROM_ADDRESS* values to determine if a DDR DIMM slot should have its SPD configuration read or not. Effectively, this now allows for 1 or 2 DIMM slots per memory controller. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | | | PXA USB OHCI: "usb stop" implementation.Rodolfo Giometti2007-10-15-0/+16
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB keys need to be switched off before loading the kernel otherwise they can remain in an undefined status which prevents them to be correctly recognized by the kernel. Signed-off-by: Rodolfo Giometti <giometti@linux.it>
* | | | [FIX] XUPV2P change command handlingMichal Simek2007-10-14-19/+17
| | | | | | | | | | | | | | | | and remove code violation
* | | | Merge git://www.denx.de/git/u-bootMichal Simek2007-10-14-442/+3332
|\ \ \ \
| * | | | Prepare for 1.3.0-rc3 releaseWolfgang Denk2007-10-14-2/+341
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | Fix warning differ in signedness in cpu/pxa/mmc.cJean-Christophe PLAGNIOL-VILLARD2007-10-13-3/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | | Fix warning differ in signedness in board/mpl/vcma9/vcma9.cWolfgang Denk2007-10-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | Merge branch 'master' of git://www.denx.de/git/u-boot-avr32Wolfgang Denk2007-10-13-18/+38
| |\ \ \ \
| | * | | | AVR32: Initialize bi_flash* in board_init_rHaavard Skinnemoen2007-10-06-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ATSTK1000-specific flash driver intializes bi_flashstart, bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI driver, don't. Initialize these in board_init_r instead so that things will still be set up correctly when we switch to the CFI driver. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| | * | | | Fix memtest breakageHaavard Skinnemoen2007-10-02-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CFG_MEMTEST_START uses weird magic involving gd, which fails to compile. Use hardcoded values instead (we actually know how much RAM we have on board.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| | * | | | Merge commit 'origin/master'Haavard Skinnemoen2007-10-02-17597/+52316
| | |\ \ \ \
| | * | | | | Update atstk1002 bootargs.Eirik Aanonsen2007-09-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updates to atstk1002 U-Boot header file: - Changed bootargs: * Set the bootargs for at1002 to point to the SD-card partition instead * ... of the boot flash. * Removing the rootfstype since that argument are not needed. Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| | * | | | | Add some comments to clocks in atstk1002.hEirik Aanonsen2007-09-18-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch applies some clarifying comments to how the different clocks are setup according to atstk1002.h Some of the previous comments where stating wrongful information. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| | * | | | | Reduce BOOTDELAY variable to 1 second by default for STK1002Hans-Christian Egtvedt2007-08-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| | * | | | | Remove double quotation marks around MAC address for STK1002Hans-Christian Egtvedt2007-08-30-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| | * | | | | AVR32: Change prototype of memsetSemih Hazar2007-08-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Semih Hazar <semih.hazar@indefia.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | | | | | Merge branch 'merge' of git://www.denx.de/git/u-boot-microblazeWolfgang Denk2007-10-13-52/+64
| |\ \ \ \ \ \
| | * | | | | | [FIX] change command handling and removing code violationMichal Simek2007-09-24-26/+24
| | | | | | | |
| | * | | | | | [FIX] change sets of commandsMichal Simek2007-09-24-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | because changing of command handling brings compilation problems
| | * | | | | | [FIX] Email reparation & CopyrightMichal Simek2007-09-24-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both codes are written by myself without any support from CTU
| | * | | | | | [PATCH] Change macro name for UartLiteMichal Simek2007-09-24-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | because PowerPC 405 can use UartLite as console
| | * | | | | | [PATCH] Add support for design without interrupt controllerMichal Simek2007-09-24-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Polling timer
generated by cgit v1.1 at 2024-12-30 13:03:15 +0000