summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* MLK-14248-3: mx6ul: update lpddr2 script to latest versionAdrian Alonso2017-04-05-2/+2
| | | | | | | | | | Update lpddr2 settings to latest version IMX6UL_LPDDR2_400MHz_16bit_V1.1.inc Use pre-charge command 0x1 per DDR register programming aid Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit e7aa25c2c7313b00475e3e0ce394a2fbaa569fbd)
* MLK-14248-1: mx6sl: update lpddr2 script to latest versionAdrian Alonso2017-04-05-2/+2
| | | | | | | | | | Update lpddr2 settings to latest version MX6SL_MMDC_LPDDR2_register_programming_aid_v0.9.inc Use pre-charge command 0x1 per DDR register programming aid Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 7c15f3afbd2cfa97b14a0013ef959e9e73fd2f1e)
* MLK-13539: mx6sl: evk: lpddr2: add pre charge command allAdrian Alonso2017-04-05-0/+1
| | | | | | | | | | | | | LPDDR2 script MX6SL_MMDC_LPDDR2_register_programming_aid_v0.9.inc Updated to add Precharge all command per JEDEC The memory controller may optionally issue a precharge-all command prior to the MRW reset command This is strongly recommended to ensure robust DRAM initialization Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 498f4a791593069220213c6d777527f4d899fb8a)
* MLK-13407: mx6qarm2: mt128x64mx3 2: add init pre charge all commandAdrian Alonso2017-04-05-3/+10
| | | | | | | | | | | | | | - Adjust ZQ delay for MMDC clock frequency at 400MHz - Precharge all commands per JEDEC The memory controller may optionally issue a Precharge-All command prior to the MRW Reset command, this is strongly recommended to ensure a robust DRAM initialization DDR Calibration script: http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/a72e010a1fd8c7fe0fda7bdc4d058c478e94c3da Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 03cc626df73d6c2bb36daf280b1cd43170c298a0)
* MLK-13131: mx6qarm2: add fastboot and recovery supportAdrian Alonso2017-04-05-0/+33
| | | | | | | Add fastboot and recovery mode support for mx6qarm Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 505e899ce582118da28ca1f4487ce7f179225bd7)
* MLK-13130: configs: mx6qarm2: android lpddr2 pop supportAdrian Alonso2017-04-05-2/+131
| | | | | | | Add Android support for mx6qarm2 lpddr2 pop target Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit 6356f2b420f3571493755f6b3a307a66a539b60c)
* MA-9263-3 [Android] Partition: enable GPT partition on imx devicesSanshan Zhang2017-04-05-19/+120
| | | | | | | | | | | | | 1. pass androidboot.storage_type to android, 'init' use it to parse different init.freescale.storage.rc. 2. store new ptable with gpt partition. 3. we use the last LBA as backup gpt table, there is many warning log when boot, change print to debug Change-Id: I84070735e9d4c2741b0e240bc1c61b357dabc5b8 Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com> (cherry picked from commit da0ce2787256a323371641b0764266d386d767a5) Signed-off-by: Ye Li <ye.li@nxp.com>
* MA-9213 imx: mx7ulp-evk: Add android supportSanshan Zhang2017-04-05-0/+206
| | | | | | | | | | | Add android features on i.MX7ULP EVK board. Implement the code to get boot device and the serial number on mx7ulp. TODO: will add the code which check misc partition after porting BCB. Change-Id: I9d06fecba303fa4dfdcaf73da1b6246444697bba Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com> (cherry picked from commit 4c60cba3a017b921aebb84dd1268c898e549c99a) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12527-3 android: Add board support to enable android fastbootYe Li2017-04-05-6/+2068
| | | | | | | | | | | | Add board level support for android fastboot feature. Each board has a android specified header file for defining android related configuraitons. And add build targets for their android uboot images building. For mx6qsabreauto, mx6sabresd and mx7dsabresd, we enable the android fastboot exclusive with DFU. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 43fe988af28c5e51fb23aa846e04bc9698256926)
* MLK-12527-2 android: Add FSL android fastboot supportYe Li2017-04-05-5/+2348
| | | | | | | | | | | | | | | | | | | | | | Integrate the FSL android fastboot features into community's fastboot. 1. Use USB gadget g_dnl driver 2. Integrate the FSL SD/SATA/NAND flash operations, since the GPT and EFI partitions are not support by i.MX. 3. Add FDT support to community's android image. 4. Add a new boot command "boota" for android image boot. The boota implements to load ramdisk and fdt to their loading addresses specified in boot.img header, while bootm won't do it for android image. 5. Support the authentication of boot.img at the "load_addr" for both SD and NAND. 6. We use new configuration CONFIG_FSL_FASTBOOT for Freescale's fastboot with relevant header file "fsl_fastboot.h". While disabling the configuration, the community fastboot is used. 7. Overwrite the cmdline in boot.img by using bootargs saved in local environment. 8. Add recovery and reboot-bootloader support. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 23d63ff185929fff5e392efc853d69b606ba081a)
* MLK-12527-1 mxc_keyb: Add MXC keyboard driverYe Li2017-04-05-0/+832
| | | | | | | | | | | | | | | The i.MX6SL EVK needs this driver in android fastboot support. Add this driver to u-boot. To use the driver, user must define: CONFIG_MXC_KPD Enable the driver CONFIG_MXC_KEYMAPPING Key mapping matrix CONFIG_MXC_KPD_COLMAX The column size of key mapping matrix CONFIG_MXC_KPD_ROWMAX The row size of the key mapping matrix Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5096e572667ff41217deb4ba9b1bd15e93fa6b59)
* MLK-14497 mx6/mx7: DTS: Update dtsi file to add usb aliasYe Li2017-04-05-0/+7
| | | | | | | | After changed to USB DM driver, the framework uses the seq to find usb device when registering a gadget driver. We have to add usb0 alias in all i.MX6 and i.MX7 dtsi, otherwise the gadget driver register will fail. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14484-3 mx7ulp_arm2: Convert to use OF_CONTROLYe Li2017-04-05-58/+183
| | | | | | | | | | Add the 10x10 ARM2 and 14x14 ARM2 DTS files. Also convert the board codes to use OF_CONTROL and DM drivers. Since the DTS files only have UART and SD1 supported. So we only enable the DM for these two modules. QSPI and USB are still kept in non-DM fashion. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14484-2 mx7ulp_arm2: Add 10x10 and 14x14 ARM2 codesYe Li2017-04-05-0/+1232
| | | | | | | | | | | | | Copy the mx7ulp ARM2 codes from v2016.03 as the base for using OF_CONTROL and DM drivers. The 14x14 ARM2 LPDDR3 script is v1.5: - IMX7ULP1_LPDDR3_320MHz_512MB_32bit_V1.5.inc The 10x10 ARM2 LPDDR2 script is v1.1: - IMX7ULP1_LPDDR2_320MHz_1GB_32bit_V1.1.inc Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14484-1 mtd/spi: Add MT35XU512ABA NOR flash supportYe Li2017-04-05-0/+4
| | | | | | | | | | | | Add MT35XU512ABA parameters to NOR flash parameters array. Since the manufactory ID is changed to 0x2C, add it for micron and using it for relevant settings. The MT35XU512ABA only supports 1 bit mode and 8 bits. It can't support dual and quad. Because the 8 bits is not support by u-boot framework and driver. We only use 1 bit mode for this flash. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-11 mx7ulp_evk: Add mfgtool environmentYe Li2017-04-05-0/+14
| | | | | | Add environment variables for mfgtool. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-10 mx7ulp_evk: Enable OCOTP fuseYe Li2017-04-05-0/+4
| | | | | | Add the OCOTP driver and fuse command configurations. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-9 mx7ulp_evk: Add eMMC reworked board supportYe Li2017-04-05-0/+59
| | | | | | | | | Add build configuration and DTS file to enable eMMC for eMMC reworked EVK board. Because the eMMC DTS file has QSPI node disabled, so we change to use non-DM QSPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-8 mx7ulp_evk: Add dynamical MMC device detectionYe Li2017-04-05-2/+18
| | | | | | | Add board_late_mmc_env_init to support MMC device detection for environment variables. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-7 DTS: mx7ulp: Add PTA and PTB two GPIO banksYe Li2017-04-05-4/+22
| | | | | | | | | | | | | | | | PTA and PTB banks are at M4 domain, but some boards like ARM2 use them for controlling A7 domain modules. So we may need to support them in GPIO driver. In the imx_rgpio2p driver, the non-DM driver supports full 6 GPIO banks, with PTA from index 0. But the DM driver which uses DTB only have 4 GPIO banks, with PTC from index 0. This will cause problem when using GPIO. So this patch add PTA and PTB banks to DTB, and reorder the sequence for gpio with PTA from index 0. So the non-DM driver and DM driver are aligned. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14312 mx7ulp: Fix incorrect DTB modification after using USBYe Li2017-04-05-3/+51
| | | | | | | | | | | | | | u-boot has feature that when booting for mfgtool, the u-boot will modify the DTB to disable SD 1.8v switch. But the judgement for mfgtool boot has a problem, it only checks whether the USB PHY power status is enabled. When a USB device (for example a USB ethernet) is used in u-boot, the power status is also enabled. So the u-boot incorrectly disable the SD 1.8v switch. The patch changes the get_boot_device to use the boot SW info provided by ROM. Only if it is a USB boot, we will start the DTB modification for SD. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1fb61cd80af59c39d1ca01d833f566628ba48f32)
* MLK-13547 configs: mx7ulp_evk: enable ethernet boot supportPeter Chen2017-04-05-0/+5
| | | | | | | | | | Since we can use USB ethernet instead of local ethernet, add ethernet support for it. To use USB ethernet function at u-boot, just plug in Micro-AB cable at USBOTG1 port with USB2Ethernet adapter connected. Signed-off-by: Peter Chen <peter.chen@nxp.com> (cherry picked from commit 60ffddf87cf6b8502c5d5fc6540364adfd66ebb3) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13929-6 mx7ulp_evk: Enable the MIPI DSI splashscreenYe Li2017-04-05-1/+89
| | | | | | | | Enable and setup board level codes for MIPI DSI splashscreen on EVK board. User needs set env variable"panel=HX8363_WVGA" for displaying. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 49cb68f5c17e42f9290336e1252ace6ac7d0b5ce)
* MLK-13929-5 mx7ulp: Update clock and SoC functions for videoYe Li2017-04-05-0/+88
| | | | | | | | | Add the clocks functions for enabling LCDIF and DSI clocks. Also add the arch_preboot_os to disable the video before enter into the kernel. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit a783799017a929f9918c9c5981fe3a7a25cd8125)
* MLK-13929-4 mx7ulp: Update registers and memory map for DSI and LCDIFYe Li2017-04-05-4/+14
| | | | | | | | Update the registers base address and LCDIF registers structure for mx7ulp. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 29a2032fc0c2330718dbab1f96c1201ae5b49b6f)
* MLK-13929-3 video: Update LCDIF driver to support MIPI-DSIYe Li2017-04-05-0/+43
| | | | | | | | | | The LCDIF provides video source for MIPI DSI host at DPI-2 interface. When the LCDIF Framebuffer driver is enabled, it uses the panel parameters setup by environments to create a panel device and register it to DSI host driver and then enable the DSI host. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 85659ea5ee975fa2d5fa7215e17a01f7006c39bf)
* MLK-13929-2 video: Add mipi panel driver for hx8363Ye Li2017-04-05-0/+150
| | | | | | | | Add the mipi dsi panel driver for device HX8363 from kernel. The panel driver needs work with mipi_dsi_northwest driver. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 0c6d0f4202bae7f61d38ecff1c9d255261f022f2)
* MLK-13929-1 video: Add MIPI DSI host controller driver for i.MX7ULPYe Li2017-04-05-0/+816
| | | | | | | | | | | | | | | | Add the host driver base from kernel for MIPI DSI controller on i.MX7ULP. The controller provides a DPI-2 interface for LCDIF video stream, and a APB interface for packet transmission. The driver provides APIs to register a MIPI panel device and its driver. The panel driver can use the write packet function provided by the host driver to send control packets to panel device via APB interface. MIPI DSI has its PHY and dedicated PLL. The driver will setup them when enabling the DSI host. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit e02115dd1c5d36ec06eabcb5a0b8e09aaf0f29a0)
* MLK-14445-6 mx7ulp_evk: Add USB OTG0 supportYe Li2017-04-05-1/+57
| | | | | | | Porting codes to support USB OTG0 on the EVK board. Convert to use DM USB driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-5 ehci-mx6: Add OTG ID detecting by GPIOYe Li2017-04-05-0/+27
| | | | | | | | | The i.MX7ulp EVK board uses GPIO to detect ID for USB OTG0, but when using DM USB driver, it is hard coded to use OTG ID pin. Add a board override function that when extcon property is provided, the function can check the GPIO to get ID. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-4 mx7ulp: Fix wrong i2c configuration nameYe Li2017-04-05-4/+4
| | | | | | | Wrong I2c driver configuration name is used in codes, so I2c driver is not built. Correct it. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-3 mx7ulp_evk: Enable wdog driver for reset cpuYe Li2017-04-05-0/+2
| | | | | | | Enable the CONFIG_ULP_WATCHDOG in defconfig, so that reset command can work. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-2 mx7ulp_evk: Add QSPI flash supportYe Li2017-04-05-3/+111
| | | | | | | | | Porting the QSPI flash board support from v2016.03, and convert to use DM QSPI driver. Since we need to support QSPI at default in u-boot, change the default DTS file to qspi enabled DTS. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14445-1 mx7ulp: Add CONFIG_MX7ULP to kconfigYe Li2017-04-05-0/+4
| | | | | | | Since many drivers need this CONFIG_MX7ULP to distiguish the settings for i.MX7ULP only. Add this entry to cpu's kconfig. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14474-2 pinctrl: imx7ulp: Add new info instance for iomuxc1Ye Li2017-04-05-3/+7
| | | | | | | | In mx7ulp pinctrl driver, we should create two info instances for iomuxc0 and iomuxc1 respective, otherwise they will share the same info instance, and cause problem in get base address... etc. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14474-1 pinctrl-imx: Fix wrong mask when SHARE_MUX_CONF_REG is setYe Li2017-04-05-1/+1
| | | | | | | when using SHARE_MUX_CONF_REG, wrong mask is used for writing config value. which causes mux value is cleared. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13925-1 mx7ulp_evk: Update LPDDR3 script to V1.4Ye Li2017-04-05-18/+4
| | | | | | | | | | | | | | | | | | | | Update LPDDR3 script from v1.2 to v1.4 EVK_IMX7ULP1_LPDDR3_320MHz_1GB_32bit_V1.4.inc with the changes below: Version 1.3 -Update the precharge command to CMD=01 at the DDR initialization phase Version 1.4 -remove unimplemented registers Write data bit delay --refer to the DDR_TRIM bits in IOMUXC1_DDR_SW_PAD_CTL_PAD_DDRn File: http://compass.freescale.net/livelink/livelink?func=ll&objid=235761218&objAction=browse&sort=name&viewType=1 Test: One EVK board passes overnight stress test. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit e3343cb38eac2cc69b58247b5adcb500e5f19834)
* MLK-13924 mx7ulp: Fix APLL num and denom setting issueYe Li2017-04-05-24/+1
| | | | | | | | | | | | | For the current APLL setting, as we want the APLL PFD0 to meet DDR clock 320Mhz requirement. We set MULT to 20, NUM to 4 and DENOM to 2, to get final 22 multiplier. But according to the RM, the NUM should always be less than the DENOM. So our setting violates the rule. Actually the ROM has already set the MULT to 22 and leave NUM/DENOM in default value. The calculated APLL PFD0 clock is 318.9888Mhz, which also meet the DDR requirement. To fix the issue, we remove the PLL settings in DCD to use default value from ROM, and only set the PFD0 FRAC. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 8cc70b1ded5309dee522aa00b43bd702a209ba51)
* MLK-13923 mx7ulp: Fix PCC register bits mask and offset issueYe Li2017-04-05-2/+2
| | | | | | | | The offset for FRAC and the mask for PCD are not correct. If we set FRAC, we can't get the right frequency. Fix them to correct value. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 079db9559c06c5e68ab8f6cd67ec4f5115dd2d59)
* MLK-13899 ARM: mx7ulp: Correct the clock index on imx7ulpBai Ping2017-04-05-1/+2
| | | | | | | | | On i.MX7ULP, value zero is reserved in SCG1 RCCR register, so the val should be decreased by 1 to get the correct clock source index. Signed-off-by: Bai Ping <ping.bai@nxp.com> (cherry picked from commit 7c9a3573ec0191f1e0bea12956346a5eab2db43a)
* MLK-13761 board: imx7ulp: Fix system reset after a7 rtc alarm expired.Bai Ping2017-04-05-0/+7
| | | | | | | | | The board will reboot if A7 core enter mem mode by rtc, then M4 core enter VLLS mode after the RTC alarm expired. Enable the dumb PMIC mode to fix this issue. Signed-off-by: Bai Ping <ping.bai@nxp.com> (cherry picked from commit 5aa5974f487e0b4c2e963a86203161c5f05e2fdf)
* MLK-13776 ocotp: Add fuse word checking before programming it on i.MX7ULPYe Li2017-04-05-1/+19
| | | | | | | | | | | On i.MX7ULP, the fuse words (except bank 0 and 1) only supports to write once, because they use ECC mode. Multiple writes may damage the ECC value and cause a wrong fuse value decoded when reading. This patch adds a checking before the fuse word programming, only can write when the word value is 0. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit e8447d649a631ec98120d84fab124ca29fbe39f0)
* MLK-13645 mx7ulp: Modify FDT file to disable SD3.0 for mfgtoolYe Li2017-04-05-0/+40
| | | | | | | | | | Since the SD3.0 kernel driver needs M4 image support, this causes problem to mfgtool. To decouple the relationship, we modify the FDT file in u-boot to disable SD3.0 when booting for mfgtool. So the kernel won't depend on M4 image. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Fugang Duan <fugang.duan@nxp.com> (cherry picked from commit 1826d6e4dc732521190c742f812193be95eea211)
* MLK-13525-1 mx7ulp: Add common plugin codes for mx7ulpYe Li2017-04-05-1/+106
| | | | | | | | Add common plugin codes to call ROM's hwcnfg_setup and generate IVT2 header. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 58ffe85c25ff554c185d8f6fd8b6443f167227da)
* MLK-13450-17 sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters arrayYe Li2017-04-05-0/+1
| | | | | | | On mx7ulp EVK board, we use MX25R6435F NOR flash, add its parameters and IDs to flash parameter array. Otherwise, the flash probe will fails. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13450-16 fsl_qspi: Update changes for mx7ulpYe Li2017-04-05-1/+24
| | | | | | | | | | | | The mx7ulp has small TX/RX FIFO (64Bytes) and AHB buffer size (128Bytes) than other i.MX. Change some parameters for it. Also found when the DDR_EN bit is set, sometime the page programming will fail during large data programming. The 64 bytes data is not programmed into flash. But when DDR_EN is clear, there is no such issue. Suspect this is a IC issue. We have disable the DDR_EN for mx7ulp. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13450-15 ehci-mx6: Add powerup_fixup implementationYe Li2017-04-05-1/+27
| | | | | | | | | | | | | | | | | | | | | When doing port reset, the PR bit of PORTSC1 will be automatically cleared by our IP, but standard EHCI needs explicit clear by software. The EHCI-HCD driver follow the EHCI specification, so after 50ms wait, it clear the PR bit by writting to the PORTSC1 register with value loaded before setting PR. This sequence is ok for our IP when the delay time is exact. But when the timer is slower, some bits like PE, PSPD have been set by controller automatically after the PR is automatically cleared. So the writing to the PORTSC1 will overwrite these bits set by controller. And eventually the driver gets wrong status. We implement the powerup_fixup operation which delays 50ms and will check the PR until it is cleared by controller. And will update the reg value which is written to PORTSC register by EHCI-HCD driver. This is much safer than depending on the delay time to be accurate and aligining with controller's behaiver. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 8dfdf83abaff44efb487f801cd1757a729d427c5)
* MLK-13450-14 ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULPYe Li2017-04-05-15/+42
| | | | | | | | | | | | The ULP has two USB controllers. These two controllers have similar NC registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY to work. This patch only supports OTG0 with UTMI PHY. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1ac22cabb96a14ac4ca58df60ae2025fb5e94db6)
* MLK-13450-7 mx7ulp: Add M4 core boot support when using single boot modeYe Li2017-04-05-0/+75
| | | | | | | | | | | | | | | | | | | The single boot mode in MX7ULP will only boot up A7, the M4 is running in ROM by checking entry from SIM0 GP register. In this patch, We bind M4 image with u-boot.bin by allocating a section for m4 image. So the whole image (included M4 image) will be loaded by A7 ROM into DDR. Then when u-boot is up, it will try to load M4 image into TCML and boot it there. Since M4 image will not be relocated in u-boot codes, we must load it during board_f. Current implementation put it in arch_cpu_init to get M4 booted as quick as possible. We requires the M4 image with IVT head and padding embedded, not a RAW binary. The image should be same as what is used for M4 QSPI boot in dual boot mode. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 04163dbd4f6190f310fff17b53b4bc7b8370ba89)
* imx: mx7ulp_evk: enable mmc/regulator supportPeng Fan2017-04-05-1/+106
| | | | | | | | | | | Enable MMC support. The fsl sdhc driver needs regulator to enable power, so enable regulator support. And bootcmd and more env. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-08-22 15:33:46 +0000