| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a demo that CM4 will boot up by u-boot without typing any
command. It boots up at u-boot early init, try to minimize the time
from power up to the CM4 running.
Since CM4 runs on QSPI NOR XIP, we have to disable the QSPI driver in
u-boot to avoid conflict.
RDC for shared GPIO1 is added, but not enabled, because the kernel is
not ready for shared GPIO1. Users can uncomment the CONFIG_IMX_RDC to
enable it.
Some legacy codes in mx6sxsabreauto are removed. We only need this work
on mx6sxsabresd as a demo.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit f66842f79d4e33ace45762466eed23a86d367642)
|
|
|
|
|
|
|
|
|
|
| |
Add support for various boot devices like NAND, QSPINOR, SPINOR,
eMMC, EIMNOR, SATA.
Modify board level files to support the feature and add corresponding defconfig files
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 72c35e80b86f7f75a52db45959793882bb730793)
|
|
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_SECURE_BOOT is used for signed image building, this configuration is
not enabled at default. Comment it in mx6/mx7 common header file. Users can
uncomment it to enable.
Also add CONFIG_CSF_SIZE for defining the CSF reserved size and resize
the CONFIG_CSF_SIZE to 0x4000 to align with v2016.03.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 01cc7d9bc205251c13712418d51f3a4d7b20861b)
|
|
|
|
|
|
|
|
|
|
| |
To support the trust boot chain, we integrate the authentication
into the kernel image loading process. The kernel image will be verified
at its load address. So when signing the kernel image, we need to
use this load address which may change on different platforms.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 3c118b8d6bbe1a25ca8c8bafeb528309f16fc73d)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Port LDO bypass support from v2015 to support the features:
1. Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz,
enable LDO bypass and setup PMIC voltages. LDO bypass is dependent
on the flatten device tree file.
2. We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now
on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to
reboot whole board, so split these code to independent function so that board file
can call it freely.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 5b87d04dba66fa45375d59648838ef89f559f75d)
|
|
|
|
|
|
|
|
|
|
|
|
| |
Align with imx_v2016.03
1. Update pmic settings to enable SD3 power and use PMIC common init codes.
2. Enable bmode.
3. Update MMC root parameters
4. Update AUXBOOT for M4
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 0816a496fbe3f7d0e4f1a9322c76908a5c557c8c)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Align with imx_v2016.03.
Add emmc support which needs board rework.
Add I2C2.
Update pmic settings.
Add bmode.
Move partial code from board_early_init_f to board_init.
Add PCI power and reset GPIO and disable PCI at default.
Update QSPI settings.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 9613a2d07760f56b3c93779b14ad32ef69856da7)
|
|
|
|
|
|
|
|
| |
Align with imx_v2016.03. Add usb ethernet support, since there is no
FEC on this i.MX6UL
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 9811e3db89f535e54ae10a10caa660f8e6036270)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add elan code, to handle epdc which has i2c devices.
In imx_v2015.04, the two pathces are for elan.
b6ba68516b681a38025252bd0ef6a6ed3e8adfa0
MLK-10215 Add elan init in i.MX6SL-EVK board
0c600f6a67f00fe0c674c08c355bea3789109679
MLK-10885 imx: mx6slevk ignore elan init when no epdc on board
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit cb249aa1d57788c52145d28f2e2c68cb320d8ae3)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add default build target for mx6qp and mx6solo.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 1a2bbdea962ab4dde3838430a06be9140af5176d)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Align board code and header file with imx_v2016.03.
Update pmic settings for i.MX6QP.
wrap spi code together using CONFIG_MXC_SPI macro.
To i.MX6SOLO, need to define nosmp in bootargs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit bb35d09d140efc7ff9b74bbcd77d7827c1dd503e)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DDR script file:
arik_r2_sdb_ddr3_528_1.14.inc
Compass link:
http://compass.freescale.net/livelink/livelink?func=ll&objid=235302593&objAction=browse&sort=name&viewType=1
Update:
setmem /32 0x020e0534 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR02 (SDQS0_B_TRIM=01, SDQS0_TRIM=10)
setmem /32 0x020e0538 = 0x00008000 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR03 (SDQS1_B_TRIM=00, SDQS1_TRIM=00)
setmem /32 0x020e053C = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR04 (SDQS2_B_TRIM=01, SDQS2_TRIM=10)
setmem /32 0x020e0540 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR05 (SDQS3_B_TRIM=01, SDQS3_TRIM=10)
setmem /32 0x020e0544 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR06 (SDQS4_B_TRIM=01, SDQS4_TRIM=10)
setmem /32 0x020e0548 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR07 (SDQS5_B_TRIM=01, SDQS5_TRIM=10)
setmem /32 0x020e054C = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR08 (SDQS6_B_TRIM=01, SDQS6_TRIM=10)
setmem /32 0x020e0550 = 0x00018200 // IOMUXC_SW_PAD_CTL_PAD_DRAM_ADDR09 (SDQS7_B_TRIM=01, SDQS7_TRIM=10)
setmem /32 0x021b08c0 = 0x24912489 // fine tune SDCLK duty cyc to low - seen to improve measured duty cycle of i.mx6
setmem /32 0x021b48c0 = 0x24914452
setmem /32 0x021b0018 = 0x00011740 // MMDC0_MDMISC, RALAT=0x5, WALAT=0x1
Test:
Passed stress memtester on one board.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit b7f43f47a78c9d0c14fe104daf22efab13709ab1)
(cherry picked from commit f521de2c5b79ab7f9b60b26cbe6a7ad50cfce9fa)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Align ddr script with imx_v2016.03 latest ddr script.
mx6qp.cfg is 1.13 version
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/8111e4d0cd81226899be637013048281e3c097b4
http://compass.freescale.net/livelink/livelink?func=ll&objId=234753630&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.13.inc is for sabre-AI
arik_r2_sdb_ddr3_528_1.13.inc is for sabresd
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 39c2989e6ba0de6b35b2d93acd9d67f889ab4b39)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To Align with imx_v2016.03.
1. Add USDHC1 support on mother board
2. Add SPINOR flash support.
3. Add enet ref clk pinmux setting and enet settings
4. Use CONFIG_SYS_USE_EIMNOR to wrap eimnor settings.
5. update mmc board settings
6. update board_init and move nand settings to board_init, but not in
board_early_init_f
7. update pmic settings to align with datasheet.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit f05f2281548ab7b47f69b2c517eb6f85ad09a5d2)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add solo version ddr script and build target.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 54af2f744c663ac2326c1488a26fac0c4ccdad09)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
For i.MX6 SOLO sabreauto and sabresd boards, add the "nosmp" kernel
bootargs.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since there is already CONFIG_MX6S used for i.MX6 SOLO in u-boot codes,
we don't need to add new CONFIG_MX6SOLO. Rename the existing CONFIG_MX6SOLO
to CONFIG_MX6S.
Additional, for CONFIG_MX6S, we should select CONFIG_MX6DL. The major difference
for these two chips are core number and DDR controller. So all duallite
relevant definitions can apply to solo. User can combine the two configs
if any code only apply to solo or duallite.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
DDR script:
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/8111e4d0cd81226899be637013048281e3c097b4
http://compass.freescale.net/livelink/livelink?func=ll&objId=234753630&objAction=browse&viewType=1
arik_r2_sabre_ddr3_528_1.13.inc is for sabre-AI
Patch in imx_v2015.04:
"
commit 5fb08a4dcc7b8478fc4236b90ad8dc2190cf94e7
Author: Peng Fan <Peng.Fan@freescale.com>
Date: Wed Nov 4 16:30:47 2015 +0800
"MLK-11825 imx: mx6dqp: update ddr script to 1.13"
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit d756891b9d303e456f59a18d5fa81969a7f37337)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Define CONFIG_MMCROOT, CONFIG_SYS_MMC_ENV_PART
to align with imx_v2016.03.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit b06ddb7a09346bf21028a239e77d5bf92469a284)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add mx6qarm2 new board revision support using mx6q pop SoC
Enable DRAM support for imx6q PoP SoC with populated LPDDR2
MT42L128M64D2
DDR calibration script:
http://sw-stash.freescale.net/projects/IMX/repos/ddr-scripts-rel/commits/040ee38ba9ad238fcb6053b663746d51321abb69
Test result: Stress test passed.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
(cherry picked from commit b0ac10892cad46c22accf89c04ea59c46bd9eb01)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ALign with imx_v2015.04.
Also to lpddr2 support:
From commit: "620cf5f3d4cf37b065b5857a8ea91d61bf6c471d"
"
Current uboot supports for running LPDDR2 at 400MHz on MX6Q ARM2 board,
but there is a problem in switching pre_periph_clk_sel to pll2_pfd2.
We cannot directly change the parent of pre_periph_clk_sel as this mux
is not a glitchless mux. We need to follow the correct procedure and wait
for the busy bits to clear before switching.
Change to follow the procedure:
1. Set periph_clk2 to OSC.
2. Switch the periph_clk to periph_clk2, checking the CCM_CDHIPR for
periph_clk , ahb_podf and axi_podf busy bits.
3. Setting the pre_periph_clk to PLL2 PFD 396M.
4. Switch the periph_clk back to pre_periph_clk and checking CCM_CDHIPR
busy bits.
"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye.Li <ye.li@nxp.com>
(cherry picked from commit febf98c68853030ce5c1f9124e77d75456e71314)
|
|
|
|
|
|
|
| |
Add the support for i.MX6DQ PoP lpddr2 ARM2 board.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit e8777e91a239599ffd231ef56c60d49b68e5e3fc)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization on mx6dq/dl arm2 board.
Need to set "CONFIG_USE_IMXIMG_PLUGIN" for this feature.
New build configurations are added for the plugin:
mx6dlarm2_lpddr2_plugin_defconfig
mx6dlarm2_plugin_defconfig
mx6qarm2_lpddr2_plugin_defconfig
configs/mx6qarm2_plugin_defconfig
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add build configurations for the plugin:
mx6ul_14x14_evk_plugin_defconfig
mx6ul_9x9_evk_plugin_defconfig
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization on mx6dq/dl/dqp sabresd and sabreauto
boards. Need to set "CONFIG_USE_IMXIMG_PLUGIN" for this feature.
Add the configurations for the plugin enabled buiding.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add the build configuration "mx6sxsabreauto_plugin_defconfig" to use the plugin.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add the build configuration "mx6sxsabresd_plugin_defconfig" to use the plugin.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add plugin.S for plugin boot initialization. Need to set "CONFIG_USE_IMXIMG_PLUGIN"
for this feature.
Add the build configuration "mx6slevk_plugin_defconfig" to use the plugin.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The issue on the i.MX7D is that, there is one cache-able memory access
between the L1 and L2 cache flush by calling the flush_dache_all->
v7_maint_dcache_all() [Flush L1 and L2 cache) which written in the C code.
L1-cache-flush -> This will flush L1 cache to L2 cache in the end.
Cache-able memory access -> This will have the chance cause the L1 line-fill
with dirty data from L2 cache(L1 cache-line dirty,
L2 clean)
L2-cache-flush -> This will only flush L2 cache to L3, but still
some dirty data on the L1 cacheline.
After C & M bit clean, -> The dirty data on the L1 cache line lost, which will
cause memory coherent issue if that dirty cache line
has some useful data
The only problem here is: there is one cache-cable memory access between L1 and L2 cache flush.
This patch should works fine on the i.MX6 and i.MX7.
The second cache flush have zero impact on the i.MX6, but this is really need for
the i.MX7D platform due to the L1 line-fill during the first dcache_flush.
And the second flush will not bring in the L1 dirty cache line due to the C bit is
clear now, which means the dcache is disabled.
Acked-by: Jason Liu<r64343@freescale.com>
Reviewed-by: Jason Liu<r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit f5d5f07fba936c4bb05c887de9d72fb75b3dc0f2)
(cherry picked from commit 86c784cf4c4b633d37a76de7d47155c08f75dc82)
(cherry picked from commit d85cd484e6825631aa1ab572e5e0539f2191d795)
(cherry picked from commit 2b29c1873c2293abe1c4b361392521223b9c9ecf)
|
|
|
|
|
|
|
| |
Specify the registered eth index by dev_id.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
(cherry picked from commit df42b7b0c5e6847f32419075eb25f274ed039d6f)
|
|
|
|
|
|
|
|
| |
Avoid transfer parameter dev_id value with "-1" to .fec_get_hwaddr(),
it should transfer fec->dev_id to get mac address from fuse.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
(cherry picked from commit 7e4a55b068311d46d16e86e697d36f34a59bf47a)
|
|
|
|
|
|
|
|
|
| |
Use NXP logo.
The vendor and board dir not changed, only replace the contents
of freescale.bmp.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 0b381fdf1a45cb06a057724e708ce0bbeee67f4d)
|
|
|
|
|
|
|
|
|
|
|
| |
The mfgtool environments only can set in BSP u-boot image, not for android
u-boot. Since android u-boot may go into fastboot in board_r phase which is
earlier than mfgtool environment check. The USB status from android fastboot
will cause u-boot to configure mfgtool environment.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 066f001a19bdc51b0fc0d65bcb87081b01f957c2)
(cherry picked from commit 03f995630f92462081e98412a0fbc86bb5106f10)
|
|
|
|
|
|
|
|
| |
Update CCM macros for i.MX6SLL.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye.Li <ye.li@nxp.com>
(cherry picked from commit f735f8ac328aa49759f6db524f7c2ba32622f711)
|
|
|
|
|
|
|
| |
Update soc settings for i.MX6SLL.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit afa2d78f2b799337eae3dc67c0ed702d5520eee6)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For Some USB mass storage devices, such as:
"
- Kingston DataTraveler 2.0 001D7D06CF09B04199C7B3EA
- Class: (from Interface) Mass Storage
- PacketSize: 64 Configurations: 1
- Vendor: 0x0930 Product 0x6545 Version 1.16
"
When `usb read 0x80000000 0 0x2000`, we met
"EHCI timed out on TD - token=0x80008d80".
The devices does not support scsi VPD page, we are not able
to get the maximum transfer length for READ(10)/WRITE(10).
So we limit this to 256 blocks as READ(6).
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit df0052575b2bc9d66ae73584768e1a457ed5d914)
|
|
|
|
|
|
|
|
|
| |
Change the CONFIG_LOADADDR to 0x80800000 and environment variable "fdt_addr"
to 0x83000000 for i.MX6SX, i.MX6SL and i.MX6UL to align the address
used in mfgtool.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 41a6f612f6ae638ac6db61c60e19dcfebf052820)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If boot from usb, reset environment to default value.
Auto apply mfgtools setting and boot mfgtools kernel.
Porting this from fsl uboot to uboot 2016.
The 7dsabresd has already added the environment and usb boot
related functions. No need to add them more. Only need to add
NAND parts environment for mfgtools.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit a352ed3c5184b95c4c9f7468f5fbb5f43de5e412)
|
|
|
|
|
|
|
| |
Add NAND pinmux settings, clock setting and related configurations.
Default not enabled, need hardware rework.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Define PHYS_SDRAM_SIZE future usage.
Define CMA for kernel usage, default is 320MB, but we do not
have enough memory on 9x9 evk lpddr2 board, so swith to 96MB.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Current i.MX6UL EVK boards enable the SPL u-boot. Change it to non-SPL
for default configurations. Add two other build configurations for SPL.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Fix runtime checking for i.MX6ULL. Add is_cpu_type(MXC_CPU_MX6ULL)
to avoid using wrong code path.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 05922b0abf848949df778c19312cb1cf7fdfbe6a)
|
|
|
|
|
|
|
|
|
|
| |
The MIB RAM and FIFO receive start register does not exist on
i.MX6ULL. Accessing these register will cause enet not work well or
cause system report fault.
Reported-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 5fb09cab9bb3cc4cef02239299d02cec666396ab)
|
|
|
|
|
|
|
|
| |
Change to use #ifdef not the IS_ENABLED, because we will get build warning
when the CONFIG_IMX_RDC is not set.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit a212eff242efb8dc171479cbaca34049d508f87b)
|
|
|
|
|
|
|
|
|
|
| |
Update settings for PRE. Value for Saturation THR of PREx,
changed from 0x20 to 0x10 to make system more stable.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 02e7090604e55d9690532294b02b499609d46e63)
(cherry picked from commit f7c5cf580fcc2c8ab95a8d835f5874d26216910f)
(cherry picked from commit 1a90b60731cd60feba1ef7a11ede2613283bb4a8)
|
|
|
|
|
|
|
|
| |
Enable the configurations CONFIG_MODULE_FUSE and CONFIG_OF_SYSTEM_SETUP for
module fuse check. And modify board level codes for SD, FEC and EIM.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 9232e9f7637afa3b71b43ab2d1361582ec5a080a)
|
|
|
|
|
|
|
|
|
|
|
| |
Add the fuse checking in drivers, when the module is disabled in fuse,
the driver will not work.
Changed drivers: BEE, GPMI, APBH-DMA, ESDHC, FEC, QSPI, ECSPI, I2C,
USB-EHCI, GIS, LCDIF.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 1704e116f9b39aeb99201919a18bc2b1e19a980e)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement a functionality to read the soc fuses and check if any module
is fused. For fused module, we have to disable it in u-boot dynamically,
and change the its node in FDT to "disabled" status before starting the kernel.
In this patch, we implement the ft_system_setup for FDT fixup. This function will
be called during boot process or by "fdt systemsetup" command.
To enable the module fuse checking, two configurations must be defined:
CONFIG_MODULE_FUSE
CONFIG_OF_SYSTEM_SETUP
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 7236051526b73a5a25cc8330a79f5c08b7d70726)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Debug monitor will print out last failed AXI access info when
system reboot is caused by AXI access failure, only works when
debug monitor is enabled.
Enable this module on i.MX6SX.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit df6ac8531d498021ed379c74fc1847bd2cec7179)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 4f4ecdbf6fe2673b8ad117df1a4974bdb7e6aa4a)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the following piece settings can not be in DCD table, we
add them in enable_ipu_clock.
"
setmem /32 0x00bb048c = 0x00000002 ## Bypass IPU1 QoS generator
setmem /32 0x00bb050c = 0x00000002 ## Bypass IPU2 QoS generator
setmem /32 0x00bb0690 = 0x00000200 ## Bandwidth THR for of PRE0
setmem /32 0x00bb0710 = 0x00000200 ## Bandwidth THR for of PRE1
setmem /32 0x00bb0790 = 0x00000200 ## Bandwidth THR for of PRE2
setmem /32 0x00bb0810 = 0x00000200 ## Bandwidth THR for of PRE3
setmem /32 0x00bb0694 = 0x00000020 ## Saturation THR for of PRE0
setmem /32 0x00bb0714 = 0x00000020 ## Saturation THR for of PRE1
setmem /32 0x00bb0794 = 0x00000020 ## Saturation THR for of PRE2
setmem /32 0x00bb0814 = 0x00000020 ## Saturation THR for of PRE
"
CONFIG_VIDEO_IPUV3 is always defined in mx6sabre_common.h,
the settings sure will effect.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 61cec88a59ebf450dd1352d81e03b5aa842e1d71)
(cherry picked from commit 3d25e2acd48f605678a98cf594a715809dea8286)
|