summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
* MLK-12436-3: mx6qarm2: add new board revision supportPeng Fan2017-04-05-0/+320
* MLK-12436-2: mx6qarm2: update ddr scriptsPeng Fan2017-04-05-1/+176
* MLK-12436-1: mx6qarm2: support i.MX6DQ PoP lpddr2 boardPeng Fan2017-04-05-2/+36
* MLK-14250-6 mx6dq/dl: Add plugin boot support for arm2 boardsYe Li2017-04-05-2/+1304
* MLK-14250-5 mx6ulevk: Add plugin boot supportYe Li2017-04-05-0/+446
* MLK-14250-4 mx6dq/dl/dqp: Add plugin boot support for sabre boardsYe Li2017-04-05-5/+1640
* MLK-14250-3 mx6sxsabreauto: Add plugin boot supportYe Li2017-04-05-1/+199
* MLK-14250-2 mx6sxsabresd: Add plugin boot supportYe Li2017-04-05-1/+176
* MLK-14250-1 mx6slevk: Add plugin boot supportYe Li2017-04-05-1/+232
* MLK-10647 armv7: Fix Dcache disable issue on i.MX7Ye.Li2017-04-05-1/+4
* MLK-13782 net: fec_mxc: specify the registered eth index by dev_idAndy Duan2017-04-05-2/+9
* MLK-13777 net: fec_mxc: avoid transfer dev_id -1 to get mac address from fuseAndy Duan2017-04-05-2/+2
* MLK-13486: imx: logos: use NXP logoPeng Fan2017-04-05-0/+0
* MLK-13410 Android: Change to set mfgtool only for none android u-bootYe Li2017-04-05-2/+2
* MLK-13307-12 imx: mx6: update ccm macro settings for i.MX6SLLPeng Fan2017-04-05-10/+52
* MLK-13307-7 imx: mx6sll: update soc settingsPeng Fan2017-04-05-2/+11
* MLK-12883 usb: limit USB_MAX_XFER_BLK to 256Peng Fan2017-04-05-1/+3
* MLK-12444-2 mx6: Modify kernel and fdt load address to align with mfgtoolYe Li2017-04-05-4/+5
* MLK-12444-1 mfgtool: Add mfgtool supportYe Li2017-04-05-1/+137
* MLK-14259-3 mx6ulevk: Add support for NANDYe Li2017-04-05-2/+77
* MLK-14259-2 mx6ulevk: Add PHYS_SDRAM_SIZE and CMA macroYe Li2017-04-05-0/+10
* MLK-14259-1 mx6ulevk: Change i.MX6UL EVK to non-SPL at defaultYe Li2017-04-05-22/+362
* MLK-12767 imx6ull: fix runtime checking for i.MX6ULLPeng Fan2017-04-05-3/+3
* MLK-12766 net: fec: do not access reserved register for i.MX6ULLPeng Fan2017-04-05-1/+1
* MLK-12565 mx7: rdc: Change IS_ENABLED to remove build warningYe Li2017-04-05-2/+3
* MLK-10708 imx:mx6qp Update Saturation THR for PRExPeng Fan2017-04-05-4/+4
* MLK-12483-5 mx6ul: Enable module fuse check EVK boardYe Li2017-04-05-1/+24
* MLK-12483-4 mx6: Modify drivers to disable fused modulesYe Li2017-04-05-10/+136
* MLK-12483-3 mx6: Add a module fuse checkingYe Li2017-04-05-1/+401
* ENGR00315894-55 iMX6SX: add debug monitor supportYe.Li2017-04-05-0/+22
* MLK-10674-2 imx: mx6qp settings for PREPeng Fan2017-04-05-2/+31
* MLK-10496: Check the PL310 version for applying errataNitin Garg2017-04-05-9/+18
* MLK-10176-6 imx: mx7: Modify GPT timer driver for mx7Peng Fan2017-04-05-2/+8
* ENGR00328312 i2c: imx: Optimize the i2c device recovery solutionFugang Duan2017-04-05-2/+26
* MLK-10576 ARM: i.MX6: exclude the ARM errata from i.MX6 UP systemNitin Garg2017-04-05-5/+9
* MLK-10524: iMX6x: Implement workaround for Cortex-A9 errata 845369Nitin Garg2017-04-05-0/+10
* MLK-12557 mx6ul: Enable syscounter as default timerYe Li2017-04-05-3/+18
* ENGR00325255 pcie:enable pcie support on imx6sx sdYe Li2017-04-05-6/+106
* ENGR00319965 pcie: mask the imx6sl outRichard Zhu2017-04-05-15/+20
* ENGR00319415 pcie: random link down issue after warm-rstRichard Zhu2017-04-05-0/+18
* MLK-11064 imx: mx6qp: Adjust AQos settings for peripheralsYe.Li2017-04-05-0/+3
* MLK-12534 mx6: shutdown vddpu and PCIE phy to save powerYe Li2017-04-05-0/+42
* MLK-12533 mx6sx: select OSC as uart's clk parentYe Li2017-04-05-0/+13
* MLK-12452-4 mx6sxsabreauto: Add secondary enet supportYe Li2017-04-05-7/+39
* MLK-12452-3 mx6sxsabresd: Add secondary enet supportYe Li2017-04-05-6/+38
* MLK-12452-1 FEC: Update fec driver to support two MDIOYe Li2017-04-05-1/+24
* MLK-12439 mx6sxsabreauto: Enable GIS for the AI boardYe Li2017-04-05-0/+6
* ENGR00315894-81 gis: Add gis moduleYe.Li2017-04-05-1/+611
* ENGR00315894-80 pxp: Add pxp moduleYe.Li2017-04-05-0/+324
* ENGR00315894-79 csi: Add csi moduleYe.Li2017-04-05-0/+425
generated by cgit v1.1 at 2024-11-05 10:00:05 +0000