summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* blackfin: fix undefined reference to srand and randMasahiro Yamada2015-06-11-1/+17
| | | | | | | | | | | | | | | | | | | | | Commit 9ba9e85f3f1c (net: Fix NET_RANDOM_ETHADDR dependencies) accidentally dropped CONFIG_LIB_RAND defines for 14 Blackfin boards. Prior to that commit, those boards defined CONFIG_LIB_RAND, but not CONFIG_NET_RANDOM_ETHADDR. So, commit 9ba9e85f3f1c should not have touched them, but in fact it ripped CONFIG_LIB_RAND off from all the header files, which caused undefined reference to srand and rand. CONFIG_LIB_RAND=y must be revived for such boards. BTW, this commit indeed makes it better, but even with this fix, three boards (bf533-stamp, bf538f-ezkit, cm-bf548) still can not build due to region 'ram' overflowed error. This was cause by commit 6eed3786c68c (net: Move the CMD_NET config to defconfigs) because CMD_NET selects NET, and NET selects REGEX. Eventually, some boards were newly enabled with CONFIG_REGEX, increasing the memory footprint. A patch is expected to fix the build error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* README.scrapyard: add entries for dead AVR32 boardsMasahiro Yamada2015-06-11-0/+6
| | | | | | | | | | | Some AVR32 boards were dropped by the following commits: 9eb45aabe078 (avr32: delete non generic board favr-32-ezkit) e36930764471 (avr32: delete non generic board hammerhead) c62d2f8fc5c6 (avr32: delete non generic board mimc200) e5354b8a9e2a (avr32: delete non generic board's atstk100{3, 4, 6}) Acked-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of http://git.denx.de/u-boot-samsungTom Rini2015-06-10-78/+2
|\
| * odroid: dts: cleanup of MAX77686 regulatorsPrzemyslaw Marczak2015-06-10-78/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit cleanup MAX77686 regulator node by: - remove the sub-nodes of unconnected regulators - remove the "regulator-compatible" properties of all regulators This prevents printing init errors for the regulators, with duplicated name strings. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-06-10-0/+2
|\ \
| * | sunxi: Enable CONFIG_SYS_64BIT_LBA when AHCI is usedBernhard Nortmann2015-06-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to absence of CONFIG_SYS_64BIT_LBA, u-boot-sunxi currently has no support for the (GPT) partioning scheme of large disks > 2TB. While the AHCI driver seems to handle this nicely, the problem is that lbaint_t values get truncated to 32-bit. This patch sets CONFIG_SYS_64BIT_LBA from sunxi_common.h for all SoCs that support AHCI (CONFIG_SUNXI_AHCI). Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Request macpwr gpio before using itHans de Goede2015-06-10-0/+1
| |/ | | | | | | | | | | | | | | This fixes ethernet no longer working on boards which use a gpio to enable the phy. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | Merge branch 'master' of git://git.denx.de/u-boot-avr32Tom Rini2015-06-10-2025/+7
|\ \
| * | avr32: delete ancient board.cAndreas Bießmann2015-06-10-259/+0
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: take maintainership for atstk1002Andreas Bießmann2015-06-10-2/+2
| | | | | | | | | | | | | | | | | | I have this board at work, so I can trun tests on it. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: delete non generic board's atstk100{3, 4, 6}Andreas Bießmann2015-06-10-572/+1
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: delete non generic board mimc200Andreas Bießmann2015-06-10-407/+0
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: delete non generic board hammerheadAndreas Bießmann2015-06-10-276/+0
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: delete non generic board favr-32-ezkitAndreas Bießmann2015-06-10-509/+0
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | atngw100: convert to generic boardAndreas Bießmann2015-06-10-0/+4
| |/ | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | tegra: config: nyan-big: Add options required by Chrome OS bootSimon Glass2015-06-09-0/+5
| | | | | | | | | | | | | | | | | | | | We need to match the device tree in the FIT with the U-Boot model so we can automatically select the right device tree. Also adjust the load address so that the device tree is not in the way when a zImage kernel tries to extract itself. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Replace 'Norrin' with 'Nyan-big' and fix typoSimon Glass2015-06-09-2/+2
| | | | | | | | | | | | | | | | With the rename the MAINTAINER file was not updated. Fix it and the 'Chrombook' typo in Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: config: Allow Chrome OS environment settings to be includedSimon Glass2015-06-09-1/+6
| | | | | | | | | | | | | | Bring these in if they are provided by the board. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: nyan-big: Add additional clock and kernel initSimon Glass2015-06-09-0/+69
| | | | | | | | | | | | | | | | | | | | We need to turn on all audio-related clocks for the Chrome OS kernel to boot. Otherwise it will hang when trying to enable audio. Also for Linux set up graphics driver video protection. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Allow board-specific initSimon Glass2015-06-09-2/+13
| | | | | | | | | | | | | | Add a hook to allows boards to add their own init to board_init(). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: lcd: Tidy up clock initSimon Glass2015-06-09-3/+1
| | | | | | | | | | | | | | Use the correct function for clock init. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Increase maximum arguments to 32Simon Glass2015-06-09-1/+1
| | | | | | | | | | | | | | | | When setting up large environment variables we can exceed 16 arguemnts. Increase this to avoid problems. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Add missing tegra124 peripheralsSimon Glass2015-06-09-7/+7
| | | | | | | | | | | | | | There are some missing entries in the tables. Add them. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Introduce SRAM repair on tegra124Simon Glass2015-06-09-1/+31
| | | | | | | | | | | | | | | | This is required in order to avoid instability when running from caches after the kernel starts. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: clock: Adjust PLL access to avoid a warningSimon Glass2015-06-09-2/+5
| | | | | | | | | | | | | | | | A harmless but confusing warning is displayed when looking up the DisplayPort PLL. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: clock: Support enabling external clocksSimon Glass2015-06-09-0/+25
| | | | | | | | | | | | | | Add a simple function to enable external clocks. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: spi: Support slow SPI ratesSimon Glass2015-06-09-3/+15
| | | | | | | | | | | | | | | | | | Use the oscillator as the source clock when we cannot achieve a low-enough speed with the peripheral clock. This happens when we request 3MHz on a SPI clock, for example. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | dm: tegra: cros_ec: Enable Chrome OS EC on Nyan-bigSimon Glass2015-06-09-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Enable the EC and keyboard, using the SPI bus. The EC driver requires a particular format and a deactivation delay. Also U-Boot does not support interrupts. For now, adjust the device tree to comply. At some point we should tidy this up to support interrupts and make tegra and exynos use the same setup. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: spi: Drop the claim_bus() method to correct delaysSimon Glass2015-06-09-17/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present the driver does not properly honour the requested SPI CS deactivation delay since the SPI bus is changed in the claim_bus() method. Everything the claim_bus() method does can be done when the device is probed (setting the speed and mode) and at the start of a new transfer (where the fifo_status is already cleared). So drop this method. Also, until the delay is complete, we should not touch the bus, so make sure that spi_cs_activate() is called before other things are done in the xfer() method. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: cros_ec: Add tegra support for Chrome OS ECSimon Glass2015-06-09-1/+7
|/ | | | | | | | This requires a change to stdin to include the 'cros-ec-keyb' input device. Put this in the common file, enabled by the relevant CONFIG. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Prepare v2015.07-rc2Tom Rini2015-06-08-1/+1
| | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* pepper: Implement Board Detection mechanismAdam YH Lee2015-06-08-20/+124
| | | | | | | | | | | | AM335x-based 'Gumstix Pepper' SBCs and variants use different types of RAM (DDR2 vs DDR3 with DDR3 being the default). Detect the board type by reading the factory-programmed EEPROM [1] and use this to select any runtime boot options such as RAM type. [1] http://elinux.org/BeagleBoardPinMux#List_of_Vendor_and_Device_IDs Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com> Signed-off-by: Ash Charles <ashcharles@gmail.com>
* autoboot.c: Add feature to stop autobooting via SHA256 encrypted passwordStefan Roese2015-06-08-31/+152
| | | | | | | | | | | | | This patch adds the feature to only stop the autobooting, and therefor boot into the U-Boot prompt, when the input string / password matches a values that is encypted via a SHA256 hash and saved in the environment. This feature is enabled by defined these config options: CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_STOP_STR_SHA256 Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* autoboot.c: Move config options to KconfigStefan Roese2015-06-08-265/+267
| | | | | | | | | | | | | | | | | | | This patch moves the following config options to Kconfig: CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_DELAY_STR CONFIG_AUTOBOOT_STOP_STR AUTOBOOT_KEYED_CTRLC Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Drop ip04 and pm9263 configs/ additions, those boards previously set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over all boards that did change. Make digsy_mtc_* string include seconds to match others and not warn. ] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* autoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG_AUTOBOOT_DELAY_STR2Stefan Roese2015-06-08-24/+2
| | | | | | | | | | | | | | | These defines for a 2nd autoboot stop and delay string are nearly unused. Only sc3 defines CONFIG_AUTOBOOT_DELAY_STR2. And a patch to remove this most likely unmaintained board is also posted to the list. By removing these defines the code will become cleaner and moving the remaining compile options to Kconfig will get easier. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
* Kconfig: Enable usage of escape char '\' in string valuesStefan Roese2015-06-08-54/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I might have missed something, but I failed to use the escape char '\' in strings. To pass a printf format string like "foo %d bar\n" via Kconfig to the code. Right now its not possible to use the escape character '\' in Kconfig string values correctly to e.g. set this string value "test output\n". The '\n' will be converted to 'n'. The current implementation removes some of the '\' chars from the input string in conf_set_sym_val(). Examples: '\' -> '' '\\' -> '\' '\\\' -> '\' '\\\\' -> '\\' ... And then doubles the backslash chars in the output string in sym_escape_string_value(). Example: '\' -> '' -> '' '\\' -> '\' -> '\\' '\\\' -> '\' -> '\\' '\\\\' -> '\\' -> '\\\\' ... As you see in these examples, its impossible to generate a single '\' charater in the output string as its needed for something like '\n'. This patch now changes this behavior to not drop some backslashes in conf_set_sym_val() and to not add new backslashes in the resulting output string. Removing the function sym_escape_string_value() completely as its not needed anymore. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-06-08-96/+776
|\
| * imx: drop warning: unused variable 'max_freq'Stefano Babic2015-06-08-1/+2
| | | | | | | | | | | | | | max_freq in print_cpuinfo is used only with imx6. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * ot1200: setup i2c bus 1 in setup_iomux_i2c()Christian Gmeiner2015-06-08-0/+15
| | | | | | | | | | | | | | On this bus there is a EEPROM containing EDID and ddr3 calibration information. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * ot1200: setup i2c bus in board_early_init_f(..)Christian Gmeiner2015-06-08-18/+22
| | | | | | | | | | | | Make it possible to use the i2c bus in SPL. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| * colibri_vf: Enable board specific USB initialisation for USB pen gpioSanchayan Maity2015-06-08-0/+26
| | | | | | | | | | | | | | | | | | | | Add IOMUX for the pad used as USB pen. This needs to be driven low for the Iris and Viola boards where it is pulled up high by default. This is required for the USB host functionality to work on these boards. Use the board specific weak initialisation function, to drive the pin low which would be called on "usb start". Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
| * usb: ehci-vf: Add weak function for board specific initialisationSanchayan Maity2015-06-08-0/+8
| | | | | | | | | | | | | | Add a weak function board_ehci_hcd_init which can be used by the board file for board specific initialisation. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
| * colibri_vf: Add separate defconfig for device tree supportBhuvanchandra DV2015-06-08-0/+12
| | | | | | | | | | | | | | | | | | | | | | Most of the drivers available for Vybrid are not yet converted to OF model to use device tree model, only few drivers like SPI and GPIO drivers use device trees. Add separate defconfig for who needs to use device tree model. Later this can be integrated to single defconfig. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
| * colibri-vf: Enable SPI supportBhuvanchandra DV2015-06-08-0/+7
| | | | | | | | | | Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Stefan Agner <stefan@agner.ch>
| * vf610: dts: Add device tree supportBhuvanchandra DV2015-06-08-0/+160
| | | | | | | | | | | | | | | | | | Add device tree files for Freescale Vybrid platform and Toradex Colibri VF50, VF61 modules. Device tree files are taken from upstream Kernel. Removed the stuff which are not used/supported yet in U-Boot. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
| * arm: vf610: Add iomux support for DSPIBhuvanchandra DV2015-06-08-0/+30
| | | | | | | | | | | | Add iomux definitions for DSPI second instance. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
| * arm: vf610: Add clock support for DSPIBhuvanchandra DV2015-06-08-0/+12
| | | | | | | | Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
| * colibri_vf: Enable GPIO supportBhuvanchandra DV2015-06-08-0/+6
| | | | | | | | | | Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
| * colibri_vf: Add pinmux entries for GPIOsBhuvanchandra DV2015-06-08-0/+109
| | | | | | | | | | | | | | | | | | Inorder to use the pins as GPIO, apart from setting the alt-function, pinmuxing need to be done, this patch adds pinmux entries of few GPIOs. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
| * dm: gpio: vf610: Add GPIO driver supportBhuvanchandra DV2015-06-08-0/+243
| | | | | | | | | | | | Add GPIO driver support to Freescale VF610 Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
generated by cgit v1.1 at 2024-07-05 00:59:31 +0000