summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* mtd: nand: omap: fix error-codes returned from omap-elm driverpekon gupta2014-06-06-6/+9
| | | | | | | | | | | This patch omap-elm.c: replaces -ve integer value returned during errorneous condition, with proper error-codes. omap-gpmc.c: updates omap-gpmc driver to pass error-codes returned from omap-elm driver to upper layers Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* mtd: nand: omap_gpmc: minor cleanup of omap_correct_data_bchpekon gupta2014-06-06-5/+5
| | | | | | | | This patch tries to avoid some local pointer dereferences, by using common local variables in omap_correct_data_bch() Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_infopekon gupta2014-06-06-32/+26
| | | | | | | | | This patch renames 'struct nand_bch_priv' which currently holds private data only for BCH ECC schemes, into 'struct omap_nand_info' so that same can be used for all ECC schemes Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* mtd: nand: omap_gpmc: remove unused members of 'struct nand_bch_priv'pekon gupta2014-06-06-17/+6
| | | | | | | | | | This patch prepares to refactor 'struct nand_bch_priv' -> 'struct omap_nand_info' And thus performs following clean-ups: - remove nand_bch_priv.type: use nand_bch_priv.ecc_scheme instead - remove nand_bch_priv.mode: <unused> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* mtd: nand: omap_elm: use macros for register definitionspekon gupta2014-06-06-3/+6
| | | | | | | | | This patch adds macros for following parameters of ELM Hardware engine - ELM_MAX_CHANNELS: ELM can process 8 data streams simultaneously - ELM_MAX_ERRORS: ELM can detect upto 16 ECC error when using BCH16 scheme Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* mtd: nand: omap_elm: use bch_type instead of nibble count to differentiate ↵pekon gupta2014-06-06-21/+11
| | | | | | | | | | | | | | | | | | | between BCH4/BCH8/BCH16 ELM hardware engine support ECC error detection for multiple ECC strengths like +------+------------------------+ |Type | ECC syndrome length | +------+------------------------+ |BCH4 | 6.5 bytes = 13 nibbles | |BCH8 | 13 byte = 26 nibbles | |BCH16 | 26 bytes = 52 nibbles | +------+------------------------+ Current implementation of omap_elm driver uses ECC syndrom length (in 'nibbles') to differentiate between BCH4/BCH8/BCH16. This patch replaces it with 'bch_type' Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* mtd: nand: omap_elm: remove #include omap_gpmc.hpekon gupta2014-06-06-1/+0
| | | | | | | There is no dependency of omap_elm.c on omap_gpmc.h Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-06-02-605/+1238
|\
| * Exynos: Make sure ps_hold gets set in the SPLDoug Anderson2014-05-31-1/+12
| | | | | | | | | | | | | | | | | | | | | | Setting ps_hold ought to be one of the first things we do when we first boot up. If we wait until the main u-boot runs we won't set it in time and the PMIC may power us back off. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm:board:exynos4: add CONFIG_SYS_GENERIC_BOARDPiotr Wilczek2014-05-29-0/+1
| | | | | | | | | | | | | | | | | | Add CONFIG_SYS_GENERIC_BOARD for all Exynos4 boards. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * initcall: Improve debugging supportSimon Glass2014-05-28-6/+13
| | | | | | | | | | | | | | | | | | Add the ability to display the code offset of an initcall even after it is relocated. This makes it much easier to relate initcalls back to the U-Boot System.map file. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: Enable the LCD backlight for snowSimon Glass2014-05-28-1/+101
| | | | | | | | | | | | | | | | | | The backlight uses FETs on the TPS65090. Enable this so that the display is visible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: dts: Enable LCD for snowSimon Glass2014-05-28-0/+57
| | | | | | | | | | | | | | Enable LCD for snow. This is a 1366 x 768 panel. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: Enable PSHOLD in SPLSimon Glass2014-05-28-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | There is quite a tight deadline in enabling PSHOLD, less than a second. In some cases (e.g. with USB download), U-Boot takes longer than that to load, so the board powers off before U-Boot starts. Add a call in SPL to enable PSHOLD. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos5: support tps65090 pmicAaron Durbin2014-05-28-0/+13
| | | | | | | | | | | | | | | | | | | | | | The TSP65090 is a PMIC on some exynos5 boards. The init function is called for the TPS65090 pmic. If that device is not a part of the device tree (returns -ENODEV) then continue. Otherwise return a failure. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * power: Explicitly select pmic device's busAaron Durbin2014-05-28-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The current pmic i2c code assumes the current i2c bus is the same as the pmic device's bus. There is nothing ensuring that to be true. Therefore, select the proper bus before performing a transaction. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos5: Enable tps65090 on exynos5-dtAaron Durbin2014-05-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | The TPS65090 pmic chip can be on exynos5250 boards. Therefore, select the appropriate config option for TPS65090 devices. This commit should really use exynos5-dt.c, when it is available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * power: Add support for TPS65090 PMU chip.Tom Wai-Hong Tam2014-05-28-0/+525
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds driver support for the TPS65090 PMU. Support includes hooking into the pmic infrastructure so that the pmic commands can be used on the console. The TPS65090 supports the following functionality: - fet enable/disable/querying - getting and setting of charge state Even though it is connected to the pmic infrastructure it does not hook into the pmic charging charging infrastructure. The device tree binding is from Linux, but only a small subset of functionality is supported. Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Signed-off-by: Katie Roberts-Hoffman <katierh@chromium.org> Signed-off-by: Rong Chang <rongchang@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * power: Add PMIC_ prefix to CHARGER_EN/DISABLESimon Glass2014-05-28-8/+10
| | | | | | | | | | | | | | | | This enum should be common across all PMICs rather than having it independently defined with the same name in multiple places. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * power: Rename CONFIG_PMIC_... to CONFIG_POWER_...Simon Glass2014-05-28-11/+11
| | | | | | | | | | | | | | | | | | Commit be3b51aa did this mostly, but several have been added since. Do the job again. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: Drop old smdk5250.c fileSimon Glass2014-05-28-367/+125
| | | | | | | | | | | | | | This is not used by any boards now. Drop it to avoid confusion. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: dts: Correct EC interrupt GPIOSimon Glass2014-05-28-2/+2
| | | | | | | | | | | | | | | | Now that the GPIO numbering series has been applied, we can use the correct GPIO for the EC interrupt. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: exynos5420: removed undefined gpio structureJaehoon Chung2014-05-16-3/+0
| | | | | | | | | | | | | | It's removed the exynos5_gpio_part1. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * mmc: s5p_sdhci: add the s5p_sdhci_core_init functionJaehoon Chung2014-05-16-25/+17
| | | | | | | | | | | | | | | | | | | | | | To reuse the code, added the s5p_sdhci_core_init function. Before applied this patch, didn't use the 8-bit mode at exynos baord. Because it didn't set "MMC_MODE_8BIT". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: exynos4: enable the dwmmc configurationJaehoon Chung2014-05-16-0/+3
| | | | | | | | | | | | | | Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * mmc: exynos_dw_mmc: enable the DDR modeJaehoon Chung2014-05-16-0/+1
| | | | | | | | | | | | | | | | | | Set the ddr mode capability by default. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: dts: exnyos: enable dw-mmc controllerJaehoon Chung2014-05-16-1/+5
| | | | | | | | | | | | | | | | | | Enabled the dw-mmc controller. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * mmc: dw_mmc: support the DDR modeJaehoon Chung2014-05-16-2/+13
| | | | | | | | | | | | | | | | | | Support the DDR mode at dw-mmc controller Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * mmc: support the DDR mode for eMMCJaehoon Chung2014-05-16-3/+20
| | | | | | | | | | | | | | Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * mmc: remove the unnecessary define and fix the wrong bit controlJaehoon Chung2014-05-16-13/+7
| | | | | | | | | | | | | | | | Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Lukasz Majeski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * mmc: exynos_dw_mmc: restore the property into hostJaehoon Chung2014-05-16-73/+133
| | | | | | | | | | | | | | | | | | | | Restore the platdata(property of dt) into host struct. Then data's information is maintained and reused anywhere. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: dts: exynos: rename from EXYNOS5_DWMMC to EXYNOS_DWMMCJaehoon Chung2014-05-16-10/+10
| | | | | | | | | | | | | | | | Exynos serise can be supported the dw-mmc controller. So, it's good that used the general prefix as "_EXYNOS_DWMMC". Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: exynos: clock: modify the set_mmc_clk for exynos4Jaehoon Chung2014-05-16-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | Modified the mmc_set_clock for eynos4. The goal of this patch is that fsys-div register should be reset. And retore the div-value, not using the value of lowlevel_init. (For using SDMMC4, this patch is needs) Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * ARM: exynos: board: change the mmc/sd init sequenceJaehoon Chung2014-05-16-7/+6
| | | | | | | | | | | | | | | | | | | | | | Exynos4 can be used the dwmmc controller for eMMC. Then it needs to check dwmmc_init() at first. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * board: trats2: Enable device tree on Trats2Beomho Seo2014-05-16-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | This patch add dwmmc emmc controller node on exynos4 and exynos4412 device tree. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Piotr Wilczek <p.wilczek@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: clock: Remove exynos4x12_set_mmc_clk functionBeomho Seo2014-05-16-28/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | exynos4x12_set_mmc_clk function have been removed. Because, exynos4x12_clock and exynos4_clock return same div_fsys* value. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Piotr Wilczek <p.wilczek@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: exynos: pinmux: add sdmmc4 gpio configratuionBeomho Seo2014-05-16-6/+29
| | | | | | | | | | | | | | | | | | | | | | | | For use dwmmc controller at exynos4, add SDMMC4 gpio configuration. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Piotr Wilczek <p.wilczek@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Piotr Wilczek <p.wilczek@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: goni: enable USB Mass StorageMateusz Zalega2014-05-16-0/+2
| | | | | | | | | | | | | | UMS-related defines were added to Samsung Goni config header. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: goni: enable GPT commandMateusz Zalega2014-05-16-0/+5
| | | | | | | | | | Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: goni: dfu: Add support for DFU to Goni targetMateusz Zalega2014-05-16-11/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Proper adjustment for supporting DFU at GONI target has been made. The s5p_goni.h file has been updated. Moreover the code for low level USB initialization has been added to GONI board code. The malloc pool has been enlarged in order to support larger buffer sizes needed by DFU implementation. Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Tested-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com> Tested-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: goni: Update configuration for Goni targetMateusz Zalega2014-05-16-26/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | Configuration file for GONI has been updated to support FAT file system, new mmc partitioning scheme and read linux kernel from eMMC instead of OneNAND. Signed-off-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Tested-by: Arkadiusz Wlodarczyk <a.wlodarczyk@samsung.com> Tested-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | ARM: at91sam9m10g45ek: add mmc environment configuration supportWu, Josh2014-05-27-0/+20
| | | | | | | | | | | | | | | | In this configuration the environment will save in file: uboot.env of mmc card. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: at91sam9m10g45ek: enable mci0 supportWu, Josh2014-05-27-1/+41
| | | | | | | | | | | | | | | | | | | | Also we enable the mmc command in configuration file. As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION, so remove the redundant CONFIG_DOS_PARTITION definition. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: at91: remove redundant ARM926EJS definition in board config filesWu, Josh2014-05-27-4/+0
| | | | | | | | | | | | | | | | As at91 board config file will include the SoC header, so we can remove the ARM926EJS definition in board config files. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | at91: remove redundant AT91FAMILY definition in board config fileWu, Josh2014-05-27-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | Now the AT91FAMILY is already defined in the at91 SoC header. The at91 board config file will include the SoC header file. So we can remove the redundant AT91FAMILY definition in at91 board config files. Signed-off-by: Josh Wu <josh.wu@atmel.com> [rebase patch] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: at91sam9x5: define the AT91FAMILY and ARM926EJS in SoC headerWu, Josh2014-05-27-0/+3
| | | | | | | | | | Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | ARM: at91: remove AT91X40 macro since it is not use any moreWu, Josh2014-05-27-2/+0
| | | | | | | | | | | | | | The at91x40.h is not exist. So we remove it. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | sama5d3xek: enable PMECC header generationAndreas Bießmann2014-05-27-0/+1
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Tested-by: Bo Shen <voice.shen@atmel.com>
* | arm:at91: enable ROM loadable atmel imageAndreas Bießmann2014-05-27-0/+95
| | | | | | | | | | | | | | | | For sama5d3xek we need to modify the SPL image for correct detection by ROM code. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Bo Shen <voice.shen@atmel.com>
* | mkimage: add atmelimageAndreas Bießmann2014-05-27-0/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel ROM has no sophisticated image format, it only checks the first 7 ARM vectors. The vectors can contain valid B or LDR opcodes, the 6'th vector contains the image size to load. Additionally the PMECC header can be written by the atmelimage target. The parameters must be given via the -n switch as a coma separated list. For example: mkimage -T atmelimage \ -n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \ -d spl/u-boot-spl.bin boot.bin A provided image can be checked for correct header setup. It prints out the PMECC header parameters if it has one and the 6'th interrupt vector content. ---8<--- Image Type: ATMEL ROM-Boot Image with PMECC Header PMECC header ==================== eccOffset: 36 sectorSize: 512 eccBitReq: 4 spareSize: 64 nbSectorPerPage: 4 usePmecc: 1 ==================== 6'th vector has 17044 set --->8--- A SPL binary modified with the atmelimage mkimage target was succesfully booted on a sama5d34ek via MMC and NAND. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Heiko Schocher <hs@denx.de> Tested-by: Bo Shen <voice.shen@atmel.com>
generated by cgit v1.1 at 2024-12-02 17:48:36 +0000