summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
* MLK-13450-15 ehci-mx6: Add powerup_fixup implementationYe Li2016-11-22-0/+25
* MLK-13450-14 ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULPYe Li2016-11-22-5/+33
* MLK-13450-13 mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULPYe Li2016-11-22-0/+50
* MLK-13450-12 gpio: Add Rapid GPIO2P driver for i.MX7ULPYe Li2016-11-22-0/+255
* MLK-13450-11 mx7ulp: Implement the clock functions for i2c driverYe Li2016-11-22-0/+44
* MLK-13450-10 lpi2c: Add I2C driver for lpi2c module on i.MX7ULPYe Li2016-11-22-0/+1037
* MLK-13450-9 mx7ulp: Add lpuart DM device and clock supportYe Li2016-11-22-3/+45
* MLK-13450-8 serial_lpuart: Add 32LE support for i.MX7ULPYe Li2016-11-22-3/+219
* MLK-13450-7 mx7ulp: Add M4 core boot support when using single boot modeYe Li2016-11-22-0/+46
* MLK-13450-6 mx7ulp: Add soc level initialization codes and functionsYe Li2016-11-22-1/+322
* MLK-13450-5 mx7ulp: Add clock framework and functionsYe Li2016-11-22-1/+2391
* MLK-13450-4 mx7ulp: Add iomux pins header fileYe Li2016-11-22-0/+910
* MLK-13450-3 mx7ulp: Add iomux driver to support IOMUXC0 and IOMUXC1Ye Li2016-11-22-0/+170
* MLK-13450-2 mx7ulp: Add registers address header fileYe Li2016-11-22-0/+1151
* MLK-13450-1 mx7ulp: Add new i.MX series mx7ulp to KconfigYe Li2016-11-22-1/+19
* MLK-13486: imx: logos: use NXP logoPeng Fan2016-11-22-0/+0
* MLK-13499 imx6sll: add epdc splash screen supportRobby Cai2016-11-21-4/+458
* MLK-13476 imx: 6sx: fix ECSPI5 basePeng Fan2016-11-17-0/+2
* MLK-13440-5 fsl_usdhc: Remove the CONFIG_SYS_FSL_ESDHC_FORCE_VSELECTYe Li2016-11-08-4/+0
* MLK-13440-4 warp: Replace CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT by using vs18_en...Ye Li2016-11-08-2/+1
* MLK-13440-3 mx6sll_arm2: Update USDHC2 parameter for using 1.8V I/OYe Li2016-11-08-6/+2
* MLK-13440-2 mx6sllevk: Update USDHC2 parameter for using 1.8V I/OYe Li2016-11-08-6/+2
* MLK-13440-1: fsl_usdhc: Add configuration parameter for using fixed 1.8V I/OYe Li2016-11-08-0/+6
* MLK-13405-4 mx6sll-arm2: change the eMMC reset pad to 1.8vHaibo Chen2016-11-04-2/+6
* MLK-13405-3 mx6sll-evk: change the eMMC reset pad to 1.8vHaibo Chen2016-11-04-2/+6
* MLK-13410 Android: Change to set mfgtool only for none android u-bootYe Li2016-11-02-2/+2
* MLK-13407: mx6qarm2: mt128x64mx3 2: add init pre charge all commandAdrian Alonso2016-10-31-3/+10
* MLK-13292 mx6sxscm: evb: add support for epop evb boardAlejandro Sierra2016-10-26-0/+5
* MLK-13290 mx6sxscm: evb: add support for 1gb evb boardAlejandro Sierra2016-10-26-0/+15
* MLK-13289 imx: mx6sxscm: generic mx6sxscm board supportJuan Gutierrez2016-10-26-0/+1435
* MLK-13392 configs: add extra misc NAND partition for AndroidHan Xu2016-10-26-25/+25
* MLK-13258 mx6dqscm: evb: support for 1Gb SCM EVB boardJuan Gutierrez2016-10-21-0/+10
* MLK-13256 mx6dqscm: qwks: add support for 1Gb SCM QWKS boardJuan Gutierrez2016-10-21-0/+15
* MLK-13255 imx: mx6dqscm: generic mx6dqscm board supportJuan Gutierrez2016-10-21-0/+3161
* MLK-13373 mx6sll: update ddr script to 2.1.1Peng Fan2016-10-21-4/+4
* MLK-13352 imx: mx6sll: support mx6sllevk boardPeng Fan2016-10-19-0/+1043
* MLK-13360 mx6sll_arm2: Fix typo issue in mx6sll LPDDR2 ARM2 defconfigYe Li2016-10-18-1/+1
* mmc: sd: optimize erasePeng Fan2016-10-18-2/+7
* mmc: sd: extracting erase related information from sd statusPeng Fan2016-10-18-0/+77
* MLK-13336 mx6sll_arm2: Update LPDDR2 script to v2.1Ye Li2016-10-13-3/+10
* MLK-13335 mx6sl: Fix build break for all i.MX6SL boardsYe Li2016-10-13-2/+2
* MLK-13331 mx6sll_arm2: Output WDOG_B signal to reset PMICYe Li2016-10-12-0/+8
* MLK-13330 mx6sll_arm2: Update LPDDR3 script to v2.2Ye Li2016-10-12-7/+14
* MLK-13311 configs: mx6sll_lpddr3_arm2: Enable network functionPeter Chen2016-10-11-0/+5
* MLK-13307-15 imx: mx6sll: add mx6sll arm2 supportPeng Fan2016-10-11-0/+1352
* MLK-13307-14 imx-common: lcdif: update lcdif regs for i.MX6SLLPeng Fan2016-10-11-4/+5
* MLK-13307-13 OCOTP: Update OCOTP driver to support i.MX6SLLYe Li2016-10-11-8/+10
* MLK-13307-12 imx: mx6: update ccm macro settings for i.MX6SLLPeng Fan2016-10-11-6/+71
* MLK-13307-11 imx: mx6sll: disable LDOPeng Fan2016-10-11-0/+2
* MLK-13307-10 mx6_common: correct loadaddr and text base for i.MX6SLLPeng Fan2016-10-11-1/+1