summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* omap3: Fixed a problem with hweccBen Goska2009-08-18-2/+2
| | | | | | | | In commit 187af954cf7958c24efcf0fd62289bbdb4f1f24e there was a typo that offset all the ecc registers by 4 bytes, fixed that. Signed-off-by: Ben Goska <goskab@onid.oregonstate.edu> Acked-by: Dirk Behme <dirk.behme@googlemail.com>
* Monahans: avoid floating point calculationsWolfgang Denk2009-08-17-7/+11
| | | | | | | | | | | Current code for the Monahans CPU defined OSCR_CLK_FREQ as 3.250 (MHz) which caused floating point operations to be used. This resulted in unresolved references to some FP related libgcc functions when using U-Boot's private libgcc functions. Change the code to use fixed point math only. Signed-off-by: Wolfgang Denk <wd@denx.de>
* flash: Fix CFI buffer size bugJohn Schmoller2009-08-13-1/+1
| | | | | | | | | | | | Fix bug introduced by 9c048b523413ae5f3ff34e00cf57569c3368ab51. The cfi_flash.c driver cast the flash buffer size to a uchar in flash_write_cfibuffer(). On some flash parts, (tested on Numonyx part PC32F512M29EWH), the buffer size is 1KB. Remove the cast to uchar to enable buffer sizes to be larger. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* trab: rename spi_init()Mike Frysinger2009-08-13-7/+7
| | | | | | | The local board-specific spi_init() function conflicts with the common SPI layer, so rename it to something board-specific. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* zlib: add watchdog reset callGiuseppe CONDORELLI2009-08-11-1/+7
| | | | | | | | | | | This patch adds watchdog reset call to allow its invokation during decompression phase. This control was present on old zlib version and here it is backported for those relevant routines. This patch is sent as a zlib separate one beacuse it was not tested due to specific board lack. zlib patches will be unified just in one when this will be validated through tests. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
* zlib: updated to v.1.2.3Giuseppe CONDORELLI2009-08-11-2185/+2466
| | | | | | | | | | | | | This patch updates zlib to the latest stable version. Only relevant zlib parts were ported to u-boot tree, as already did for the current zlib (0.95). New zlib guarantees a faster inflate performances other then others improvements as explained at www.zlib.net. It also includes Alessandro Rubini's patches to allow 0 as destination pointer and to call watchdog reset if required by architecture. Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com> Reviewed-by: Angelo Castello <angelo.castello@st.com> Reviewed-by: Alessandro Rubini <rubini-list@gnudd.com>
* dtt, lm81: move unneccessary printf into a debug printfHeiko Schocher2009-08-11-1/+1
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-08-11-0/+1
|\
| * 83xx, kmeter1, fix: update in the DTS the correct size for the first flashHeiko Schocher2009-07-29-0/+1
| | | | | | | | | | | | | | | | | | When updating the "reg" in the "/localbus/flash@f0000000,0" node size was wrong updated for the first flash, because the total size was filled in, instead of the right size for it. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2009-08-11-1/+1
|\ \
| * | MIMC200: reduce LCD pixclockMark Jackson2009-08-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The initial pixclock for the MIMC200 board is wrong (and causes screen corruption due to DMA underruns). This patch simply reduces the pixel clock to fix the problem. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
* | | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-08-11-85/+538
|\ \ \
| * | | UEC FIXED PHY: Determine fixed-phy port using UEC interface name.Richard Retanubun2009-08-10-17/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed a misunderstanding in the original implementation, 'devnum' that was used in the cpu/ppc4xx/4xx_enet.c implementation was NOT the PHY's SMI address, rather it was the number of the MAC interface on the CPU. The equivalent of this for uec_phy will be the UEC number stored in mii_info->dev->name. Usage example is updated for uec. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | Assigned a static SMI address to all UECs TBIPA address.Richard Retanubun2009-08-10-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is set to 0x1F by default and can be overwritten on the board header file by defining CONFIG_UTBIPAR_INIT_TBIPA. This allows the CPU to simply "reserve" one SMI address instead of using a different one for each UEC. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | net: kirkwood: updates: used eth_setenv_enetaddr apiPrafulla Wadaskar2009-08-10-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | eth_setenv_enetaddr is avaible by upper layer using this saves 204 bytes on total image size used Local OUI instead of Marvell OUI for random MAC address generation logic Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | Fix E1000 build warning on AP1000 boardRoy Zang2009-08-10-44/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix E1000 build warning on AP1000 board Fix the build warning on AP1000 board: e1000.c:131: warning: 'e1000_read_eeprom' used but never defined e1000.c:2012: warning: 'e1000_set_phy_mode' defined but not used Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | ARM: Davinci DM355: Enabling DM9000 on DM355 EVMSandeep Paulraj2009-08-10-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to recent changes to the NET support on U-boot, DM9000 is no longer detected on the DM355 EVM. This minor update enables DM9000 on the DM355 EVM. Tested on the DM355 EVM Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | net: phy: bugfixes: mv88E61xx compiler warnings fixedPrafulla Wadaskar2009-08-10-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. mv88E61xx driver compiler warnings fixed 2. idstr if-else statements changed to switch() construct and added default case too. This fixed idstr may be uninitialized warning Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | | arm: A320: driver for FTMAC100 ethernet controllerPo-Yu Chuang2009-08-10-0/+434
| |/ / | | | | | | | | | | | | | | | | | | This patch adds an FTMAC100 ethernet driver for Faraday A320 evaluation board. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | | 85xx: Removed BEDBUG support from FSL 85xx boardsKumar Gala2009-08-10-4/+0
|/ / | | | | | | | | | | | | | | | | For some reason the MPC8544 enabled BEDBUG if PCI was enabled and that got copied int the MPC8536, MPC8572 and P2020 DS boards. The BEDBUG support has never been made to work completely on e500/85xx so we just disable it to save space and match the other FSL 85xx boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Prepare 2009.08-rc2v2009.08-rc2Wolfgang Denk2009-08-10-1/+1021
| | | | | | | | | | | | Update CHANGELOG Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Minor coding style cleanup.Wolfgang Denk2009-08-10-4/+0
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | net/tftp.c: fix warning: pointer targets differ in signednessWolfgang Denk2009-08-10-1/+3
| | | | | | | | | | | | | | | | | | | | tftp.c:294: warning: pointer targets in passing argument 1 of 'strlen' differ in signedness This was only visible for the utx8245 board which seems to have DEBUG enabled. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | ARM Cortex A8: Remove bogus config.mk entriesDirk Behme2009-08-10-38/+1
| | | | | | | | | | | | | | Remove bogus config.mk entry, fix newline and remove redundant omap3/config.mk Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
* | OMAP3: Fix missing GPMC_CONFIG_CS0_BASEDirk Behme2009-08-10-0/+1
| | | | | | | | | | | | | | | | | | | | Applying two indepenent OMAP3 patches resulted in missing GPMC_CONFIG_CS0_BASE. Patch "omap3: embedd gpmc_cs into gpmc config struct" removes GPMC_CONFIG_CS0_BASE, independent patch "omap3: bug fix for NOR boot support" introduces it's usage. Re-introduce GPMC_CONFIG_CS0_BASE. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
* | mxc-mmc: sdhc host driver for MX2 and MX3 proccessorIlya Yanok2009-08-09-0/+565
| | | | | | | | | | | | | | | | | | | | This is a port of Linux driver for SDHC host controller hardware found on Freescale's MX2 and MX3 processors. Uses new generic MMC framework (CONFIG_GENERIC_MMC) and it looks like there are some problems with a framework (at least on LE cpus). Some of these problems are addressed in the following patches. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* | kirkwood/gpio.h: remove duplicate definitionAlessandro Rubini2009-08-09-2/+0
| | | | | | | | Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
* | Add driver for the ST M95xxx SPI EEPROMAlbin Tonnerre2009-08-09-0/+118
| | | | | | | | | | | | | | | | This chip is used in a number of boards manufactured by Calao-Systems which should be supported soon. This driver provides the necessary spi_read and spi_write functions necessary to communicate with the chip. Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
* | arm: Sheevaplug: Fixed NAND specific warningPrafulla Wadaskar2009-08-09-0/+1
| | | | | | | | | | | | | | It is recommended to define the macro CONFIG_SYS_64BIT_VSPRINTF for NAND specific warning removal, same is done in this patch Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* | Dual-license IBM code contributionsJosh Boyer2009-08-09-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | It was brought to our attention that U-Boot contains code derived from the IBM OpenBIOS source code originally provided with some of the older PowerPC 4xx development boards. As a result, the original license of this code has been carried in the various files for a number of years in the U-Boot project. IBM is dual-licensing the IBM code contributions already present in U-Boot under either the terms of the GNU General Public License version 2, or the original code license already present. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | fdt: Fix fdt_pci_dma_ranges handling of 64-bit rangesKumar Gala2009-08-09-2/+2
| | | | | | | | | | | | | | | | | | | | If the size of a region equal to 4G it can't be represnted in a 32-bit BAR so we should have marked that case as MEM64. Additionally bump the number of inbound windows up to 4 to handle the fact that Freescale PPCs that have an implicit window for CCSRBAR. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | ARM EABI: add new helper functions resp. function namesWolfgang Denk2009-08-09-9/+33
| | | | | | | | | | | | | | | | | | | | | | The ARM EABI defines new names for GCC helper functions, and GCC seems to need some new functions as well. This patch is a minimal-invasive approach to fix problems with EABI conformant tool chains (to be used with "USE_PRIVATE_LIBGCC=yes"). Signed-off-by: Wolfgang Denk <wd@denx.de> Tested-by: Dirk Behme <dirk.behme@googlemail.com>
* | hush: Fix bogus free() callPeter Tyser2009-08-09-1/+1
| | | | | | | | | | | | | | An off-by-one error in hush.c resulted in an unintentional free() call every time a command was executed Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | digsy_mtc: Update default environmentDetlev Zundel2009-08-09-20/+100
| | | | | | | | Signed-off-by: Detlev Zundel <dzu@denx.de>
* | digsy_mtc: Add delay in SPI transfers to the companion controller.Detlev Zundel2009-08-09-20/+27
| | | | | | | | | | | | | | While at it, remove initialization of variables which will be set before usage in all cases. Signed-off-by: Detlev Zundel <dzu@denx.de>
* | digsy_mtc: minor fixes for mtc command helpAnatolij Gustschin2009-08-09-5/+6
| | | | | | | | | | | | | | | | | | | | Add mtc state subcommand description to the help of mtc command. Remove some newlines in description of commands for proper help formating. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | digsy_mtc: Add mtc state command.Grzegorz Bernacki2009-08-09-0/+31
| | | | | | | | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* | Partition support: remove newline from partition nameWolfgang Denk2009-08-09-11/+21
| | | | | | | | | | | | | | Remove bogus newline character that got added to the .name field of the disk_partition_t structure. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Fix LZMA string.h header inclusion issue and remove unused variables.Luigi 'Comio' Mantellini2009-08-09-3/+2
| | | | | | | | Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
* | bus_vcxk.c: fix warning: unused variable 'lineptr'Jens Scharsig2009-08-09-1/+0
| | | | | | | | Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
* | env: kill off default_environment_sizeMike Frysinger2009-08-09-22/+1
| | | | | | | | | | | | | | | | | | The only environment type that uses this variable is spi flash, and that is only because it is reimplementing the common set_default_env() function. So fix the spi flash code and kill off the default_environment_size in the process. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | export SPI functions to standalone appsMike Frysinger2009-08-09-5/+20
| | | | | | | | | | | | While we're here, fix the broken #ifdef handling in _exports.h. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2009-08-08-686/+3565
|\ \
| * | Add Intel E1000 PCIE card supportRoy Zang2009-08-08-491/+3466
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on Intel PRO/1000 Network Driver 7.3.20-k2 Add Intel E1000 PCIE card support. The following cards are added: INTEL_82571EB_COPPER INTEL_82571EB_FIBER, INTEL_82571EB_SERDES INTEL_82571EB_QUAD_COPPER INTEL_82571PT_QUAD_COPPER INTEL_82571EB_QUAD_FIBER INTEL_82571EB_QUAD_COPPER_LOWPROFILE INTEL_82571EB_SERDES_DUAL INTEL_82571EB_SERDES_QUAD INTEL_82572EI_COPPER INTEL_82572EI_FIBER INTEL_82572EI_SERDES INTEL_82572EI INTEL_82573E INTEL_82573E_IAMT INTEL_82573L INTEL_82546GB_QUAD_COPPER_KSP3 INTEL_80003ES2LAN_COPPER_DPT INTEL_80003ES2LAN_SERDES_DPT INTEL_80003ES2LAN_COPPER_SPT INTEL_80003ES2LAN_SERDES_SPT 82571EB_COPPER dual ports, 82572EI single port, 82572EI_COPPER single port PCIE cards and 82545EM_COPPER, 82541GI_LF pci cards are tested on both P2020 board and MPC8544DS board. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | net: sync env ethaddr to device enetaddr in eth_init()Mike Frysinger2009-08-07-30/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the previous enetaddr refactoring, the assumption with commit 56b555a644 was that the eth layer would handle the env -> device enetaddr syncing. This was not the case as eth_initialize() is called only once and the sync occurs there. So make sure the eth_init() function does the env -> device sync with every network init. Reported-by: Andrzej Wolski <awolski@poczta.fm> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * | minor debug cleanups in ./netRobin Getz2009-08-07-167/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minor ./net cleanups - no functional changes - change #ifdef DEBUG printf(); #endif to just debug() - changed __FUNCTION__ to __func__ - got rid of extra whitespace between function and opening brace - removed unnecessary braces on if statements gcc dead code elimination should make this functionally/size equivalent when DEBUG is not defined. (confirmed on Blackfin, with gcc 4.3.3). Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | | omap3: bug fix for NOR boot supportPenda Naveen Kumar2009-08-08-4/+4
| | | | | | | | | | | | | | | | | | | | | This patch provides bug fix, when omap3 uses nor boot. Signed-off-by: Penda Naveen Kumar<pnaveen@ti.com> Acked-by: Dirk Behme <dirk.behme@googlemail.com>
* | | Fix examples for OMAP3 boards...Michael Evans2009-08-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The attached patch corrects an error in the examples/Makefile which causes the applications in the examples directory to hang on OMAP3 based boards. The current Makefile sets -Ttext during linking to 0x0c100000 which is outside of addressable SDRAM memory. The script corrects the existing ifeq...else...endif logic to look at the VENDOR tag rather than the CPU tag. The patch affects the following configs: omap3_beagle_config, omap3_overo_config, omap3_evm_config, omap3_pandora_config, omap3_zoom1_config and omap3_zoom2_config. Signed-off-by: Michael Evans <horse_dung@hotmail.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | omap3: use only fixed-size types inside ctrl_structsDirk Behme2009-08-08-194/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | replace variable types in ctrl_structs for omap3 by those with fixed size (u8, u16, u32). Additional ifndef-protection is needed by examples which do not compile when including asm/types.h Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
* | | omap3: replace all instances of gpmc config struct by one globalDirk Behme2009-08-08-40/+35
| | | | | | | | | | | | | | | Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de> Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
generated by cgit v1.1 at 2024-11-09 20:43:24 +0000