summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* arm: rmobile: lager: Remove MACH_TYPE_LAGER and CONFIG_MACH_TYPENobuhiro Iwamatsu2014-04-28-4/+0
| | | | | | | | MACH_TYPE_LAGER and CONFIG_MACH_TYPE are not already available on Lager board. This removes them. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: lager: Change to maximum CPU frequencyNobuhiro Iwamatsu2014-04-28-0/+6
| | | | | | | | Maximum CPU clock of R8A7790 that are used in lager board is 1.4GHz. This change to use the maximum clock in this board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: lager: Update calculation of CONFIG_SH_TMU_CLK_FREQNobuhiro Iwamatsu2014-04-28-3/+4
| | | | | | | | | CONFIG_SH_TMU_CLK_FREQ of lager is calculated from the external clock. This defines RMOBILE_XTAL_CLK, this updates the calculation of CONFIG_SH_TMU_CLK_FREQ. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: koelsch: Change to maximum CPU frequencyNobuhiro Iwamatsu2014-04-28-0/+7
| | | | | | | | Maximum CPU clock of R8A7791 that are used in koelsch board is 1.5GHz. This change to use the maximum clock in this board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add register infomation of PLL regsiterNobuhiro Iwamatsu2014-04-28-0/+4
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: koelsch: Update calculation of CONFIG_SH_TMU_CLK_FREQNobuhiro Iwamatsu2014-04-28-2/+3
| | | | | | | | | CONFIG_SH_TMU_CLK_FREQ of koelsch is calculated from the external clock. This defines RMOBILE_XTAL_CLK, this updates the calculation of CONFIG_SH_TMU_CLK_FREQ. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: koelsch: Update QoS initializationNobuhiro Iwamatsu2014-04-28-17/+12
| | | | | | | This update QoS version 0.240 for ES1 and version 0.310 for ES2. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: lager: Update QoS initialization to version 0.955Nobuhiro Iwamatsu2014-04-28-7/+7
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: keolsch: Add support ES2 revision of R8A7791Nobuhiro Iwamatsu2014-04-28-40/+129
| | | | | | | | | There is koelsch where ES2 revision of R8A7791 was put on. This is different in Qos setting. This adds Qos setting for ES2 revision of R8A7791. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: r8a7791: Add support ES2 revisionNobuhiro Iwamatsu2014-04-28-1/+5
| | | | | | | | There is ES2 is a new revision to R8A7791. This adds support this revision. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: r8a7790: Add support ES2 revisionNobuhiro Iwamatsu2014-04-28-0/+4
| | | | | | | | There is ES2 is a new revision to R8A7790. This adds support this revision. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Update print_cpuinfo functionNobuhiro Iwamatsu2014-04-28-27/+22
| | | | | | | | | The print_cpuinfo fucntion has same code. It has a code of many common. This adds a table of CPU information, duplicate using for-loop. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add prototype for function to get the CPU information to rmobile.hNobuhiro Iwamatsu2014-04-28-0/+6
| | | | | | | These functions are defined but has no prototype declaration. Add them. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add rmobile_get_cpu_rev_fraction() for R-Car SoCsNobuhiro Iwamatsu2014-04-28-0/+5
| | | | | | | This adds rmobile_get_cpu_rev_fraction to get fraction revision for R-Car SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add 1 to value of the CPU revision in ↵Nobuhiro Iwamatsu2014-04-28-1/+1
| | | | | | | | | | rmobile_get_cpu_rev_integer() Value that can be obtained in the rmobile_get_cpu_rev_integer() starts at 0. However, revisions to start from 1, which adds 1. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Merge functions to get the CPU information of R8A7790 and R8A7791Nobuhiro Iwamatsu2014-04-28-34/+4
| | | | | | | | Functions to get the CPU information of R8A7790 and R8A7791 are common. This merges these as cpu_info-rcar.c. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: lager: Remove NOR-Flash supportNobuhiro Iwamatsu2014-04-28-216/+0
| | | | | | | | Lagar board has NOR-Flash. But user uses SPI-Flash ROM instead of NOR-Flash. This removed the setting of NOR-Flash. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: lager: Change name of the structureNobuhiro Iwamatsu2014-04-28-115/+115
| | | | | | | This changes from r8a7790_ to rcar_. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: koelsch: Remove NOR-Flash supportNobuhiro Iwamatsu2014-04-28-215/+0
| | | | | | | | Koelsch board has NOR-Flash. But user uses SPI-Flash ROM instead of NOR-Flash. This removed the setting of NOR-Flash. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: koelsch: Change name of structureNobuhiro Iwamatsu2014-04-28-120/+120
| | | | | | | This changes from r8a7791_ to rcar_. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: r8a779x: Fix L2 cache init and latency settingNobuhiro Iwamatsu2014-04-28-2/+18
| | | | | | | | L2CTLR only need to update for cluster 0. This changes L2CTLR to initialize only when cluster is 0. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Coordinate the common part of the header file of r8a7790 and ↵Nobuhiro Iwamatsu2014-04-28-1224/+640
| | | | | | | | | | r8a7791 Header files of R8A7790 and R8A7791 have common part of many. This coordinates as rcar-base.h. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-21-996/+5866
|\
| * am43xx_evm: Drop SPI SPLTom Rini2014-04-17-8/+0
| | | | | | | | | | | | | | QSPI booting on this board does not use SPL, so drop SPI-SPL related options. Signed-off-by: Tom Rini <trini@ti.com>
| * arm, da850: staticize funtionsManish Badarkhe2014-04-17-6/+3
| | | | | | | | | | | | | | Make funtions static which are locally used in file and remove the declaration from header file. Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
| * am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or NOR_BOOTTom Rini2014-04-17-7/+5
| | | | | | | | | | | | | | | | | | | | In the case of SPL or NOR_BOOT (no SPL involved) we need to include certain code in the build. Use !CONFIG_SKIP_LOWLEVEL_INIT rather than CONFIG_SPL_BUILD || CONFIG_NOR_BOOT to make the code clearer, and to make supporting XIP QSPI boot clearer in the code. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Wolfgang Denk <wd@denx.de>
| * omap3: zoom1: switch to generic ti_omap3_common config headerNishanth Menon2014-04-17-109/+16
| | | | | | | | | | | | | | | | ti_omap3_common contains a lot of common header definitions that help reduce the size of the zoom1 config file. So, use the generic header and customize as needed for the platform (example: no spl). Signed-off-by: Nishanth Menon <nm@ti.com>
| * omap3: zoom1: fix default consoleNishanth Menon2014-04-17-1/+1
| | | | | | | | | | | | | | We do not use ttyS2 anymore in Linux, it changed to ttyO2 a few years back. never too late to update. Signed-off-by: Nishanth Menon <nm@ti.com>
| * omap3: zoom1: enable bootzNishanth Menon2014-04-17-1/+11
| | | | | | | | | | | | | | Boot from zImage and fdt_file if uImage is not available to maintain the legacy behavior. Signed-off-by: Nishanth Menon <nm@ti.com>
| * omap3: zoom1: disable JFFS2 and enable FS_GENERICNishanth Menon2014-04-17-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is more in line with commits 664979a2a9f764b63b8094458b87247d254b0cc1(omap3_beagle: remove JFFS2 support.) and 102ce9ea7afdda80fe25aa786975e1722196bdb9 (omap3_beagle: enable CMD_FS_GENERIC and simplify load of image/ramdisk) CMD_FS_GENERIC allows us to simplify where we load up our image from either from ext2/fat etc. So, lets use that instead of cumbersome options we'd have to use. Sticking with existing conventions, defaults will be: bootfile=uImage bootpart=0:1 (first partition) bootdir=/ (/ in first partition) Signed-off-by: Nishanth Menon <nm@ti.com>
| * omap3: zoom1: enable common network commandsNishanth Menon2014-04-17-1/+3
| | | | | | | | | | | | Basic networking commands for usability. Signed-off-by: Nishanth Menon <nm@ti.com>
| * OMAP3: zoom1: enable LAN9211Nishanth Menon2014-04-17-3/+27
| | | | | | | | | | | | | | Zoom1 was wrongly setup for LAN91C96. Fix it by enabling LAN9211. Signed-off-by: Nishanth Menon <nm@ti.com>
| * OMAP3: zoom1: Configure GPMC for EthernetNishanth Menon2014-04-17-6/+31
| | | | | | | | | | | | zoom1 uses LAN9211 configured over GPMC Chip Select 1. Signed-off-by: Nishanth Menon <nm@ti.com>
| * omap3: zoom1: enable CONFIG_SYS_GENERIC_BOARDNishanth Menon2014-04-17-0/+1
| | | | | | | | | | | | | | CONFIG_SYS_GENERIC_BOARD should now be enabled for generic functionality Further information in doc/README.generic-board Signed-off-by: Nishanth Menon <nm@ti.com>
| * keystone2: net: add keystone ethernet driverKaricheri, Muralidharan2014-04-17-0/+1057
| | | | | | | | | | | | | | | | | | | | | | | | Ethernet driver configures the CPSW, SGMI and Phy and uses the the Navigator APIs. The driver supports 4 Ethernet ports and can work with only one port at a time. Port configurations are defined in board.c. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
| * keystone2: add keystone multicore navigator driverVitaly Andrianov2014-04-17-0/+570
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multicore navigator consists of Network Coprocessor (NetCP) and Queue Manager sub system. More details on the hardware can be obtained from the following links:- Network Coprocessor: http://www.ti.com/lit/pdf/sprugz6 Multicore Navigator: http://www.ti.com/lit/pdf/sprugr9 Multicore navigator driver implements APIs to configure the Queue Manager and NetCP Pkt DMA. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * k2hk-evm: add configuration for spi1 and spi2 supportKaricheri, Muralidharan2014-04-17-0/+9
| | | | | | | | | | | | | | | | currently only spi0 is enabled on k2hk evm. This configuration update is needed to enable spi1 and spi2. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * spi: davinci: add support for multiple bus and chip selectKaricheri, Muralidharan2014-04-17-3/+79
| | | | | | | | | | | | | | | | | | | | | | | | Currently davinci spi driver supports only bus 0 cs 0. This patch allows driver to support bus 1 and bus 2 with configurable number of chip selects. Also defaults are selected in a way to avoid regression on other platforms that uses davinci spi driver and has only one spi bus. Signed-off-by: Rex Chang <rchang@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| * k2hk: add support for k2hk SOC and EVMVitaly Andrianov2014-04-17-0/+2778
| | | | | | | | | | | | | | | | | | | | | | | | | | | | k2hk EVM is based on Texas Instruments Keystone2 Hawking/Kepler SoC. Keystone2 SoC has ARM v7 Cortex-A15 MPCore processor. Please refer the ti/k2hk_evm/README for details on the board, build and other information. This patch add support for keystone architecture and k2hk evm. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com>
| * i2c, davinci: convert driver to new mutlibus/mutliadapter frameworkVitaly Andrianov2014-04-17-235/+306
| | | | | | | | | | | | | | | | | | - add davinci driver to new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
| * i2c, davinci: move i2c_defs.h to the drivers/i2c directoryKaricheri, Muralidharan2014-04-17-68/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the davinci i2c_defs.h file to drivers.i2c directory. It will allow to reuse the davinci_i2c driver for TI Keystone2 SOCs. Not used "git mv" command to move the file because small part of it with definitions specific for Davinci SOCs has to remain in the arch/arm/include/asm/arch-davinci. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * NAND: DaVinci: allow forced disable of subpage writesKaricheri, Muralidharan2014-04-17-0/+8
| | | | | | | | | | | | | | | | | | This patch introduces a configurable mechanism to disable subpage writes in the DaVinci NAND driver. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * arm: add support for arch timerVitaly Andrianov2014-04-17-0/+59
| | | | | | | | | | | | | | | | This patch add basic support for the architecture timer found on recent ARMv7 based SoCs. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
| * tools: mkimage: add support for gpimage formatKaricheri, Muralidharan2014-04-17-93/+220
| | | | | | | | | | | | | | | | | | | | | | This patch add support for gpimage format as a preparatory patch for porting u-boot for keystone2 devices and is based on omapimage format. It re-uses gph header to store the size and loadaddr as done in omapimage.c Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * fdt: call ft_board_setup_ex() at the end of image_setup_libfdt()Vitaly Andrianov2014-04-17-0/+12
| | | | | | | | | | | | | | | | | | | | The keystone2 SOC requires to fix all 32 bit aliased addresses to their 36 physical format. This has to happen after all fdt nodes are added or modified. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * TI:omap3: Convert omap3_beagle to ti_omap3_common.hTom Rini2014-04-17-170/+25
| | | | | | | | | | | | | | Convert to using the common config files. This requires a little more flexibility in the common files than we had been using before. Signed-off-by: Tom Rini <trini@ti.com>
| * TI:armv7: Switch to CONFIG_SYS_BOARD_GENERICTom Rini2014-04-17-0/+1
| | | | | | | | | | | | | | Tested on AM335x GP EVM, AM335x EVM SK, Beaglebone White, Beaglebone Black, AM437xx GP EVM, OMAP5 uEVM, OMAP4 Pandaboard Signed-off-by: Tom Rini <trini@ti.com>
| * dra7xx_evm: Add QSPI_4 support, qspiboot build targetTom Rini2014-04-17-1/+67
| | | | | | | | | | | | | | | | | | | | | | | | We previously only supported QSPI_1 (single) support. Add QSPI_4 (quad) read support as well. This means we can be given one of two boot device values, but don't care which it is, so perform a fixup on the QSPI_4 value. We add a qspiboot build target to better show how you would use QSPI as a boot device in deployment. When we boot from QSPI, we can check the environment for 'boot_os' to control Falcon Mode. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
| * SPL:SPI: Add Falcon Mode supportTom Rini2014-04-17-6/+40
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * am335x_evm: Drop SPI SPL support from the default buildTom Rini2014-04-17-9/+9
| | | | | | | | | | | | | | | | This is only useful with the _spiboot build target anyhow, so only include it then. Drop CONFIG_SPL_OS_BOOT support then as the flash is small and didn't include a spot for the device tree already. Signed-off-by: Tom Rini <trini@ti.com>