summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* OMAP3: SDRC: Introduce Numonyx DDR typeEnric Balletbo i Serra2010-10-17-0/+43
| | | | | | | | | | Introduce Numonyx DDR timings and provide CONFIG_OMAP3_NUMONYX_DDR config options to allow for platform files to setup their timings. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Steve Sakoman <steve.sakoman@linaro.org> Tested-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDPSteve Sakoman2010-10-17-17/+13
| | | | | | | This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP3: Fix bug in get_sdr_cs_offset()Steve Sakoman2010-10-17-1/+1
| | | | | | | | | | | | | This patch fixes a typo in the routine to calculate the cs offset based upon the contents of the SDRC cs_cfg register. This function mistakenly shifts the CS1STARTLOW field 17 bits right instead of 17 bits left. This hasn't been an issue to date because all OMAP3 boards currently are configured to have zeros in this field. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
* ARMV7: OMAP3: Enable cache support on OveroSteve Sakoman2010-10-17-0/+1
| | | | Signed-off-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP3: Implement relocation for OveroSteve Sakoman2010-10-17-1/+4
| | | | | | | This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430Sukumar Ghorai2010-10-17-5/+8
| | | | | | | | | | The SDP4430 does not have onboard NAND, it has eMMC on the second MMC slot. This patch adds support for saving the u-boot environment to eMMC. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP4: Use generic mmc driver on OveroSteve Sakoman2010-10-17-4/+15
| | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP4: Use generic mmc driver on BeagleSteve Sakoman2010-10-17-4/+15
| | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP4: Use generic mmc driver on SDP4430Sukumar Ghorai2010-10-17-5/+15
| | | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP4: Use generic mmc driver on PandaSukumar Ghorai2010-10-17-5/+13
| | | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP: Add new mmc driver compatible with CONFIG_GENERIC_MMCSukumar Ghorai2010-10-17-0/+436
| | | | | | | | | | | | | OMAP boards currently use a legacy mmc driver. This patch adds a new mmc driver which will work with the generic mmc driver in u-boot. This new driver will work with both OMAP3 and OMAP4 boards. This patch does not remove the old driver. It should remain in the tree until all boards that use it switch to the new driver. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
* MMC: Fix for capacity calculation on eMMCSukumar Ghorai2010-10-17-0/+11
| | | | | | | | | | The current mmc driver returns erroneous capacity information for eMMC. The capacity of eMMC devices is available only in the ext-CSD register. This patch add code to read the ext-CDSD register and correctly calculate eMMC capacity. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Acked-by: Steve Sakoman <steve@sakoman.com>
* ARMV7: OMAP: Use default vendor/product ID for USB gadgetSteve Sakoman2010-10-17-15/+0
| | | | | | | TI hasn't reserved a USB Product ID for gadgets, so use the default vendor and product ID to avoid confusion. Signed-off-by: Steve Sakoman <steve@sakoman.com>
* Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-17-35/+4619
|\
| * mx51evk: add u-boot.imx to ALL targetLoic Minier2010-10-14-0/+1
| | | | | | | | | | Signed-off-by: Loic Minier <loic.minier@linaro.org> CC: stefano babic <sbabic@denx.de>
| * MX31: Add USB Host support to the QONG boardStefano Babic2010-10-13-1/+50
| | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * MX31: Add support for MXC EHCI controllerStefano Babic2010-10-13-0/+131
| | | | | | | | | | | | The patch adds the EHCI controller for the i.MX31 Soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * MX31: add support for setting pin padsStefano Babic2010-10-13-31/+421
| | | | | | | | | | | | | | The patch adds a utility function and defines to set the pad as it is done in linux. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * MX31: Add support to update FPGA bitstreamStefano Babic2010-10-13-3/+111
| | | | | | | | | | | | | | | | The patch adds the possibility to update the QONG FPGA (a Lattice XP2-5E) with u-boot using some GPIOs to drive the JTAG interface. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * MX31: Adding missing iomux pin to MX.31 registersStefano Babic2010-10-13-0/+7
| | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * FPGA: add support for downloading Lattice bitstreamStefano Babic2010-10-13-0/+3898
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support to load a Lattice's bitstream image (called VME file) into a Lattice FPGA. The code containing the state machine delivered as part of Lattice's ispVMtools is integrated. The FPGA is programmed using the JTAG interface. The board maintainer must provide accessors to drive the JTAG signals TCK, TMS, TDI and to get the value of the input signal TDO. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | env_mmc: Fix crashing bug encountered after enabling ARM relocationSteve Sakoman2010-10-13-12/+15
| | | | | | | | | | | | | | | | | | | | | | The crash was occuring in env_relocate because it was being called prior to mmc_initialize. This patch moves the MMC initialization earlier in the init process. This patch also cleans up the env_relocate_spec code in env_mmc.c Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org> Acked-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-13-1295/+2954
|\ \
| * | board/armltd/integrator/split_by_variant.sh: fix 'echo -n'Andreas Bießmann2010-10-13-72/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an error when running MAKEALL for ARM9. On OS X /bin/sh uses builtin echo which does not utilise '-n' switch. GNU manual for builtins recomend to use here-document style to solve this portability issue. This patch removes the usage of 'echo -n' and replace by here-document style or a oneline echo command. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> CC: Peter Pearse <peter.pearse@arm.com>
| * | ARMV7: Fixed baudrate setting in pl01x driverMatt Waddel2010-10-13-55/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | The pl01x serial driver was lacking the code to switch baudrates from the command line. Fixed by simply saving the new baudrate and calling serial_init() again. Also fixed CamelCase variables, I/O accessors and comment style. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
| * | ARMV7: Versatile Express Coretile CortexA9x4 supportMatt Waddel2010-10-13-0/+734
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
| * | arch/arm/include/asm/sizes.h: cleanupsAndreas Bießmann2010-10-13-209/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Merge several sizes.h in asm/arch subdirectories into a single asm/sizes.h file. Fixup usage of asm/arch/sizes.h in some files to use the merged file. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk2010-10-13-0/+0
| |\ \
| | * | Kirkwood: Changes specific to ARM relocation supportPrafulla Wadaskar2010-10-12-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | All Kirkwood based boards are supported for this new implementation ref: docs/README.arm-relocation Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * | kirkwood: added common config file mv-common.hPrafulla Wadaskar2010-10-12-533/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is observed that, in most of the board configs the code is being duplicated, also for any common change all board files needs update This issue was under discussion from long on mailing list and we converge on introducing common config file. With this patch- 1. Total Kirkwood specific configuration code is reduced by 210 lines 2. All common configuration can be shared by multiple boards 3. Easy to manage common updates like ARM relocation changes mv-common.h file is added to include/configs/ It contains all common configuration supported for all Kirkwood boards The respective board configs are updated for its usage Build tested for guruplug, mv88f6281gtw_ge, openrd_base, rd6281a and sheevaplug Binary execution tested for sheevaplug Todo: 1. Other custom Kirkwood boards to be synced 2. The support to be extended for Orion5X based boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * | Kirkwood: dram_init is moved to dram.cPrafulla Wadaskar2010-10-12-55/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all Kirkwood boards so far dram_init function is duplicated dram_init function is moved to dram.c and relevant code from all board specific files removed If any board needs specific dram init handling than standard one, then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in board config header file and the dram_init function can be put in board specific source file For ex. keymile boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * | orion5x: optimize window size computationAlbert Aribaud2010-10-12-11/+21
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Chris Moore <moore@free.fr> Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| | * | Kirkwood: print_cpuinfo fixed for valid devid revidPrafulla Wadaskar2010-10-12-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier Device Identification register was used to detect the type for SoC, considering 88F6282 support to be added, It is not possible to detect the same using current algorithm. With this patch, device ID is being read using PCIE devid register, also valid chip revision ID will also be read and displayed Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * | mvsata_ide: adjust port init sequenceAlbert Aribaud2010-10-12-9/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvsata_ide_initialize_port(): adjust init sequence (SStatus should be checked only after all writes to SControl) and return success/failure to ide_preinit(). Also, as some tests showed init durations in the hundreds of us, raise the time-out to 01 ms to be on the safe side. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | | ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOCBen Gardiner2010-10-13-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were some #undef's of CONFIG_SYS_ARM_WITHOUT_RELOC added to a few board configs as part of the arm relocation series; but these are not needed now as we do not #undef what is not #defined in the first place. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> CC: Heiko Schocher <hs@denx.de>
| * | | ARM: relocation: fix typo in commentHeiko Schocher2010-10-13-5/+5
| | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * | | Kirkwood: Changes specific to ARM relocation supportPrafulla Wadaskar2010-10-13-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | All Kirkwood based boards are supported for this new implementation ref: docs/README.arm-relocation Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | kirkwood: added common config file mv-common.hPrafulla Wadaskar2010-10-13-533/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is observed that, in most of the board configs the code is being duplicated, also for any common change all board files needs update This issue was under discussion from long on mailing list and we converge on introducing common config file. With this patch- 1. Total Kirkwood specific configuration code is reduced by 210 lines 2. All common configuration can be shared by multiple boards 3. Easy to manage common updates like ARM relocation changes mv-common.h file is added to include/configs/ It contains all common configuration supported for all Kirkwood boards The respective board configs are updated for its usage Build tested for guruplug, mv88f6281gtw_ge, openrd_base, rd6281a and sheevaplug Binary execution tested for sheevaplug Todo: 1. Other custom Kirkwood boards to be synced 2. The support to be extended for Orion5X based boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | Kirkwood: dram_init is moved to dram.cPrafulla Wadaskar2010-10-13-55/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For all Kirkwood boards so far dram_init function is duplicated dram_init function is moved to dram.c and relevant code from all board specific files removed If any board needs specific dram init handling than standard one, then, a macro CONFIG_SYS_BOARD_DRAM_INIT should be defined in board config header file and the dram_init function can be put in board specific source file For ex. keymile boards Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | orion5x: optimize window size computationAlbert Aribaud2010-10-13-11/+21
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Chris Moore <moore@free.fr> Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | | Kirkwood: print_cpuinfo fixed for valid devid revidPrafulla Wadaskar2010-10-13-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier Device Identification register was used to detect the type for SoC, considering 88F6282 support to be added, It is not possible to detect the same using current algorithm. With this patch, device ID is being read using PCIE devid register, also valid chip revision ID will also be read and displayed Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | | mvsata_ide: adjust port init sequenceAlbert Aribaud2010-10-13-9/+33
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvsata_ide_initialize_port(): adjust init sequence (SStatus should be checked only after all writes to SControl) and return success/failure to ide_preinit(). Also, as some tests showed init durations in the hundreds of us, raise the time-out to 01 ms to be on the safe side. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | orion5x: fix relocation-incompatible codeAlbert Aribaud2010-10-11-31/+54
| | | | | | | | | | | | Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | arm: bugfix: replace ble with blo in start.S filesAlbert Aribaud2010-10-11-68/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generalized misuse of ble within relocation and bss initialization loops caused one iteration too many. Instead of ble ('branch if lower or equal'), use blo ('branch if lower'). While we're at it, fix all 'addreee' typos. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-11-74/+90
| |\ \
| | * | at91: Add arch_preboot_os which disables PIT in a faster wayAlexander Stein2010-10-05-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When disabled the PIT runs until it reaches the CPIV value. The Linux PIT driver stops the PIT and waits until it stopped. This can take over 100ms. Simply stopping in u-boot isn't sufficient as the PIT will still be running when Linux is waiting until it stopped. So, we stop it in u-boot by setting the compare value to a value slightly greater than the current running counter to make the PIT stopped in short time. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
| | * | atmel_usart: change register access to C structureAndreas Bießmann2010-10-05-46/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces C structure definition for register footprint of atmel's usart. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
| | * | at91_emac.h: fix typo in register definitionAndreas Bießmann2010-10-05-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Jens Scharsig <js_at_ng@scharsoft.de>
| | * | AT91: convert cpu.c to struct SoC accessReinhard Meyer2010-10-05-20/+12
| | | | | | | | | | | | | | | | Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| | * | at91_emac.c: poll for IDLE when writing PHYAndreas Bießmann2010-10-05-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the unnecessary waiting in at91emac_read() and at91emac_write() by checking the IDLE flag. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>