summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* arm: dma_alloc_coherent: malloc() -> memalign()Kuo-Jung Su2013-09-14-1/+1
| | | | | | | | | | | | Even though the MMU/D-cache is off, some DMA engines still expect strict address alignment. For example, the incoming Faraday FTMAC110 & FTGMAC100 ethernet controllers expect the tx/rx descriptors should always be aligned to 16-bytes boundary. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Albert ARIBAUD <albert.u.boot@aribaud.net>
* arm: spl: Do not set the stack pointer twiceMasahiro Yamada2013-09-14-3/+0
| | | | | | | Because the stack pointer is already set in arch/arm/lib/crt0.S, we do not need to set it in arch/arm/lib/spl.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Revert "standalone-examples: support custom GCC lib"Tom Rini2013-09-12-13/+2
| | | | | | | | | | | | After further testing, this patch has two problems. First, examples/standalone/Makefile was already inherting PLATFORM_LIBS from the top-level Makefile so this lead to duplicating the private libgcc. Second, currently the private libgcc has a reference to 'hang' that is not being fulfilled. This reverts commit 4412db46468d5965da736d06f84d13e68a6e0b51. Signed-off-by: Tom Rini <trini@ti.com>
* Merge and reformat boards.cfg and MAINTAINERSAlbert ARIBAUD2013-09-12-2631/+1350
| | | | | | | | Put all informations about targets, including state (active or orphan) and maintainers, in boards.cfg; remove MAINTAINERS; adjust the build system accordingly. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-09-12-45/+766
|\
| * Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-09-11-45/+766
| |\ | | | | | | | | | | | | Conflicts: tools/Makefile
| | * arm:goni:mmc: Add sd card detection and initialization.Przemyslaw Marczak2013-09-11-2/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change allow to use sd card on Goni the same like mmc 0. SD card is mmc dev 1, so it can be used like this: "fatls mmc 1:2". SD card is inited even if eMMC initialization fails. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * arm:mmc:goni/exynos: Fix wrong mmc base register devices offset.Przemyslaw Marczak2013-09-11-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On s5pc1xx mmc devices offset is multiply of 0x100000, wrong value was 0x10000. Register offset always points to mmc 0 before this change. Add macro definition of mmc dev register offset to s5pc1xx and exynos mmc. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Minkyu Kang <mk7.kang@samsung.com> Acked-by: Jaehoon Chung <jh80.chung at samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * dts: samsung: arndale: Fix include pathChander Kashyap2013-09-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | As per new convention ARCH_CPU_DTS is not defined in "dtc/Makefile". Hence Arndale comilation is failing. Fix this by adding proper include file in "board/samsung/dts/exynos5250-arndale.dts". Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * drivers:power:max77686: add function to set voltage and modePiotr Wilczek2013-08-30-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add new functions to pmic max77686 to set voltage and mode. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Tom Rini <trini@ti.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos5250: arndale: Add mmc supportInderpal Singh2013-08-30-0/+32
| | | | | | | | | | | | | | | | | | | | | This patch adds mmc support to the arndale board. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos5250: Add arndale board supportChander Kashyap2013-08-30-0/+452
| | | | | | | | | | | | | | | | | | | | | | | | Arndale board is based on samsung's exynos5250 soc. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * arm: goni: remove config.mk fileMinkyu Kang2013-08-28-18/+3
| | | | | | | | | | | | | | | | | | | | | Since config.mk is deprecated, remove this file, and move CONFIG_SYS_TEXT_BASE define to config file. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * arm: smdkc100: remove config.mk fileMinkyu Kang2013-08-28-16/+3
| | | | | | | | | | | | | | | | | | | | | | | | Since config.mk is deprecated, remove this file, and move CONFIG_SYS_TEXT_BASE define to config file. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Wolfgang Denk <wd@denx.de>
| | * CONFIG: EXYNOS5: Replace misnomer SMDK5250 with EXYNOS5250 and update MakefilesChander Kashyap2013-08-27-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Update the Makefiles so that all boards can use the same spl generation tool Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * arm:exynos:gpio: fix s5p_gpio_part_max for exynos4x12Piotr Wilczek2013-08-23-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fix wrong value returned by 's5p_gpio_part_max' function for Exynos4412. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxTom Rini2013-09-09-1/+12
|\ \ \
| * | | ppc4xx: Fix GPIO handling in lwmon5 and lcd4_lwmon5 BSPStefan Roese2013-09-07-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LCD4 needs a slightly different GPIO configuration than the original LWMON5 variant. GPIO49 needs to be configured to a default output value of 0 (permanent voltage supply). Additionally lcd4 also needs to enable the LSB transmitter. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-09-09-2/+12
|\ \ \ \
| * | | | powerpc/mpc85xx: Fix the I2C bus speed error on p1022Tang Yuantian2013-09-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The source clock frequency of I2C bus on p1022 is the platform(CCB) clock, not CCB/2. The wrong source clock frequency leads to wrong I2C bus speed setting. so, fixed it. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
| * | | | SPL: P1022DS: switch to new multibus/multiadapter supportYing Zhang2013-09-09-1/+10
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | - Added section "u_boot_list" in arch/powerpc/cpu/mpc85xx/u-boot-spl.lds - Use the function i2c_init_all instead of i2c_init Signed-off-by: Ying Zhang <b40530@freescale.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-09-06-453/+8726
|\ \ \ \ | |/ / / |/| / / | |/ /
| * | socfpga: Creating driver for Reset ManagerChin Liang See2013-09-06-31/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consolidating reset code into reset_manager.c. Also separating reset configuration for virtual target and real hardware Cyclone V development kit Signed-off-by: Chin Liang See <clsee@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * | socfpga: Adding configuration for development kitChin Liang See2013-09-06-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Separating the configuration file for Virtual Target and real hardware Cyclone V development kit Signed-off-by: Chin Liang See <clsee@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * | arm: lds: Remove libgcc eabi exception handling tablesMichal Simek2013-09-05-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove ARM eabi exception handling tables (for frame unwinding). AFAICT, u-boot stubs away the frame unwiding routines, so the tables will more or less just consume space. It should be OK to remove them. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'Albert ARIBAUD2013-09-05-2/+2
| |\ \
| | * | ARM: atmel: sama5d3: drop unused CONFIG_NET_MULTIBo Shen2013-09-04-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop unused CONFIG_NET_MULTI Signed-off-by: Bo Shen <voice.shen@gmail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | mtd: atmel_nand: pmecc: fix bug fail to correct bit error in 1024-bytes sectorWu, Josh2013-09-04-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PMECC use BCH algorithm to correct error. In BCH algorithm, the primitive polynomial value is GF(2^13) for 512-bytes sector size. And it is GF(2^14) for 1024-bytes sector size. This patch will choose correct degree of the remainders (13 or 14) for different sector size. Tested in AT91SAM9X5-EK with MLC nand flash. More detail can be refered to section 5.4.1 of: AT91SAM ARM-based Embedded MPU Application Note <http://www.atmel.com/Images/doc11127.pdf> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-09-05-97/+3691
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/serial/serial.c The conflict above was a trivial case of adding one init function in each branch, and manually resolved in merge.
| | * | | i.MX6: Set and clear the gating bits for Phase Fractional DividersEric Nelson2013-08-31-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This addresses silicon errata ERR006282 as described in this document: https://community.freescale.com/docs/DOC-94581 Also implemented in Freescale's 2009.08-based release: http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/ Commit id: b7c5badf94ffbe6cd0845efbb75e16e05e3af404 Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | | i.MX6: nitrogen6x: Don't bother setting PLL3(480) PFD1 divisorEric Nelson2013-08-31-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This clock isn't feeding anything under U-Boot, so there's no point in changing it from power-on default. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | i.MX6: Correct ANATOP_PFD (Phase Fractional Divider) register declarationsEric Nelson2013-08-31-23/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some _CLKGATE_MASK and _FRAC_MASK macros were wrong for PFD_480 and the PFD_528 macros were missing. Fortunately, the incorrect macros weren't being used. Since both the PFD_480 and PFD_528 registers have the same structure, and the fields are identical for [0..3] in bytes [0..3], so a single set of macros will suffice. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | i.MX6: Add convenience macros cpu_type(rev) and is_cpu_type(cpu)Eric Nelson2013-08-31-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | | ARM: mxs: rename function that sets AUTO_RESTART flagHector Palacios2013-08-31-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AUTO_RESTART flag of HW_RTC_PERSISTENT0 register will power up the chip automatically 180ms after power down. This bit must be enabled by the boot loader to ensure the target can start upon hardware reset or watchdog reset even when powered from a battery. Currently the function named 'mxs_power_clear_auto_restart()' is setting this flag although the 'clear' in its name suggest the opposite. This patch renames the function to 'mxs_power_set_auto_restart()' and removes the comment about EVK revision A which was confusing because the function indeed was setting the flag. Signed-off-by: Hector Palacios <hector.palacios@digi.com>
| | * | | ARM: Congatec: README updateSARTRE Leo2013-08-31-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | README: U-boot works both on SPI-NOR and SDcard Signed-off-by: Leo Sartre <lsartre@adeneo-embedded.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| | * | | tools: mxsboot: Staticize functionsMarek Vasut2013-08-31-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make remaining non-static functions static and the same for vars. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * | | tools: Sort lists of files in MakefileMarek Vasut2013-08-31-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the lists of files so they are in order again. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Stefano Babic <sbabic@denx.de>
| | * | | ARM: mxs: tools: Add mkimage support for MXS bootstreamMarek Vasut2013-08-31-0/+2772
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add mkimage support for generating and verifying MXS bootstream. The implementation here is mostly a glue code between MXSSB v0.4 and mkimage, but the long-term goal is to rectify this and merge MXSSB with mkimage more tightly. Once this code is properly in U-Boot, MXSSB shall be deprecated in favor of mkimage-mxsimage support. Note that the mxsimage generator needs libcrypto from OpenSSL, I therefore enabled the libcrypto/libssl unconditionally. MXSSB: http://git.denx.de/?p=mxssb.git;a=summary The code is based on research presented at: http://www.rockbox.org/wiki/SbFileFormat Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br>
| | * | | imx: add status reporting for HAB statusStefano Babic2013-08-31-4/+182
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add functions to report the HAB (High Assurance Boot) status of e.g. i.MX6 CPUs. This is taken from git://git.freescale.com/imx/uboot-imx.git branch imx_v2009.08_3.0.35_4.0.0 cpu/arm_cortexa8/mx6/generic.c include/asm-arm/arch-mx6/mx6_secure.h Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | tools: add support for setting the CSF into imximageStefano Babic2013-08-31-7/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for setting the CSF (Command Sequence File) pointer which is used for HAB (High Assurance Boot) in the imximage by adding e.g. CSF 0x2000 in the imximage.cfg file. This will set the CSF pointer accordingly just after the padded data image area. The boot_data.length is adjusted with the value from the imximage.cfg config file. The resulting u-boot.imx can be signed with the FSL HAB tooling. The generated CSF block needs to be appended to the u-boot.imx. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | tools: add padding of data image file for imximageStefano Babic2013-08-31-3/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement function vrec_header to be able to pad the final data image file according the what has been calculated for boot_data.length. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | tools: add variable padding of data image in mkimageStefano Babic2013-08-31-4/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use previously unused return value of function vrec_header to return a padding size to generic mkimage. This padding size is used in copy_files to pad with zeros after copying the data image. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | tools: dynamically allocate imx_header in imximageStefano Babic2013-08-31-10/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change to dynamically allocate the imx_header to correctly allocate the IVT, Boot Data and DCD at correct locations depending on the boot media. Also check that the Image Vector Table Offset + IVT + Boot Data + DCD <= Initial Load Region Size. Previously struct imx_header was always 4096 bytes and was not dealing correctly with the Image Vector Table Offset. Now, the memory allocation looks for e.g. SD boot like this Storage u-boot.imx RAM Device 00000000 177ff000 <-------------- | 00000400 00000000 d1 00 20 40 IVT.header 177ff400 <------- | 00000404 00000004 00 00 80 17 IVT.entry 177ff404 ----------- | 00000408 00000008 00 00 00 00 IVT.reserved1 177ff408 | | | 0000040C 0000000C 2c f4 7f 17 IVT.dcd 177ff40C ------ | | | 00000410 00000010 20 f4 7f 17 IVT.boot 177ff410 ---- | | | | 00000414 00000014 00 f4 7f 17 IVT.self 177ff414 -------- | | 00000418 00000018 00 00 00 00 IVT.csf 177ff418 | | | | 0000041C 0000001C 00 00 00 00 IVT.reserved2 177ff41C | | | | 00000420 00000020 00 f0 7f 17 BootData.start 177ff420 <--- | | --- 00000424 00000024 00 60 03 00 BootData.length 177ff424 | | 00000428 00000028 00 00 00 00 BootData.plugin 177ff428 | | 0000042C 0000002C d2 03 30 40 DCD.header 177ff42C <----- | ... | 00001000 00000c00 13 00 00 ea U-Boot Start 17800000 <---------- While at it also remove the unused #define HEADER_OFFSET. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | tools: rename mximage_flash_offset to imximage_ivt_offsetStefano Babic2013-08-31-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This better reflects the naming from the Reference Manual as well as fits better since "flash" is not really applicabe for SATA. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | tools: imx_header should not include flash_offsetStefano Babic2013-08-31-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Doing a make distclean; make mx6qsabresd_config; make and hexdump -C u-boot.imx | less ... 00000360 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000003f0 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 |................| ^^^^^^^^^^^ 00000400 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00001000 13 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |...ê.ð.å.ð.å.ð.å| ... shows the flash_offset value being written into the final generated image, wich is not correct. Instead create flash_offset as static variable such that the generated image is "clean". 00000360 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00001000 13 00 00 ea 14 f0 9f e5 14 f0 9f e5 14 f0 9f e5 |...ê.ð.å.ð.å.ð.å| Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | | mmc: mxsmmc: Enable MMC HC supportAmaury Pouly2013-08-23-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable support for high-capacity eMMC and MMC cards. The MXS MMC driver has no problem with those. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Amaury Pouly <amaury.pouly@gmail.com> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
| | * | | fec_mxc: set ethaddr if fuses burned and not previously setEric Nelson2013-08-21-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this change, the following message is generated: Warning: FEC using MAC address from net device See doc/README.enetaddr for details. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | ARM: mxs: Add mx28evk_auart_console targetAndreas Wass2013-08-21-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The target uses AUART 3 instead of the DUART for console output. Signed-off-by: Andreas Wass <andreas.wass@dalelven.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de>
| | * | | ARM: mxs: Added application UART driverAndreas Wass2013-08-21-0/+374
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver makes it possible to use an application UART as the U-Boot output console for Freescale i.MX23/i.MX28 devices. Signed-off-by: Andreas Wass <andreas.wass@dalelven.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| | * | | i.MX6: nitrogen6x: force HDMI onto IPU0/DI0Eric Nelson2013-08-21-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our Linux kernel switches the HDMI connector onto IPU0/DI1, but the U-Boot display driver only supports IPU0/DI0 for the time being. Because of this, a soft re-boot will leave the HDMI output connected to the wrong display port and prevent video from being displayed. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
generated by cgit v1.1 at 2024-11-06 17:52:49 +0000