summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Convert SMC911X Ethernet driver to CONFIG_NET_MULTI APIBen Warren2009-07-22-195/+335
| | | | | | | | | | | | All in-tree boards that use this controller have CONFIG_NET_MULTI added Also: - changed CONFIG_DRIVER_SMC911X* to CONFIG_SMC911X* - cleaned up line lengths - modified all boards that override weak function in this driver - added Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Tested-by: Mike Frysinger <vapier@gentoo.org>
* Add warning about upcoming removal of old Ethernet APIBen Warren2009-07-22-0/+2
| | | | Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* P2020RDB Added support of Vitesse PHYs VSC8641(RGMII) and VSC8221(SGMII)Poonam Aggrwal2009-07-22-1/+51
| | | | | | | | | These PHYs are on P2020RDB platform. Also revamped Freescale copyright message in drivers/net/tsec.c. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Add DNS supportRobin Getz2009-07-22-3/+401
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 04 Oct 2008 Pieter posted a dns implementation for U-Boot. http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg10216.html > > DNS can be enabled by setting CFG_CMD_DNS. After performing a query, > the serverip environment var is updated. > > Probably there are some cosmetic issues with the patch. Unfortunatly I > do not have the time to correct these. So if anybody else likes DNS > support in U-Boot and has the time, feel free to patch it in the main tree. Here it is again - slightly modified & smaller: - update to 2009-06 (Pieter's patch was for U-Boot 1.2.0) - README.dns is added - syntax is changed (now takes a third option, the env var to store the result in) - add a random port() function in net.c - sort Makefile in ./net/Makefile - dns just returns unless a env var is given - run through checkpatch, and clean up style issues - remove packet from stack - cleaned up some comments - failure returns much faster (if server responds, don't wait for timeout) - use built in functions (memcpy) rather than byte copy. Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: tsec - fix dereferencing type-punned pointer will break strict-aliasing ↵Kim Phillips2009-07-22-1/+4
| | | | | | | | | | | | rules warning fix this gcc 4.4 warning: tsec.c: In function 'tsec_init': tsec.c:200: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* net: rename NetRxPkt to NetRxPacketMike Frysinger2009-07-22-7/+7
| | | | | | | | The net code is mostly consistent in using 'Packet' rather than 'Pkt', so rename the minor detractor to follow suite. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* sh: sh_eth: Remove garbage from printfNobuhiro Iwamatsu2009-07-22-1/+1
| | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* smc911x: add support for LAN9221Andreas Pretzsch2009-07-22-0/+2
| | | | | Signed-off-by: Andreas Pretzsch <apr@cn-eng.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* rm9200 ethernet driver: board-specific quirk (csb337)David Brownell2009-07-22-4/+18
| | | | | | | | | | | CSB337 boards originally shipped with MicroMonitor, not U-Boot; and with a version using a different convention for recording Ethernet addresses than anyone else. To avoid breaking Linux when it uses U-Boot, have it use the same convention on that hardware. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-23-17/+1676
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-23-17/+1676
| |\
| | * arm, kirkwood: added kw_gpio_set_valid() in gpio.hHeiko Schocher2009-07-23-0/+2
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * Kirkwood: add Marvell Kirkwood gpio driverDieter Kiermaier2009-07-23-0/+203
| | | | | | | | | | | | | | | | | | Signed-off-by: Dieter Kiermaier <dk-arm-linux@gmx.de> Acked-by: Prafulla Wadaskar <prafulla@marvell.com> Tested-by: Heiko Schocher <hs@denx.de>
| | * arm, kirkwood: added KW_TWSI_BASE in kirkwood.hHeiko Schocher2009-07-23-0/+1
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * Marvell RD6281A Board supportPrafulla Wadaskar2009-07-23-0/+499
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is Marvell's 88F6281_A0 based reference design board This patch is tested for- 1. Boot from DRAM/NAND flash/NFS 2. File transfer using tftp and loadb 3. NAND flash read/write/erase Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * api: Fix broken build on ARM.Piotr Ziecik2009-07-23-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes broken build introduced by commit 84bf7ca522e94ec402a1264b01971b924b7e268f (api: remove un-needed ifdef CONFIG_API already handle by the Makefile). Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
| | * at91cap9adk: fix #ifdef/#endif pairingWolfgang Denk2009-07-22-1/+1
| | | | | | | | | | | | | | | | | | The #ifdef/#endif pairing in this file was obviously messed up. Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * ARM Cortex A8: Move OMAP3 specific reset handlerMinkyu Kang2009-07-22-14/+37
| | | | | | | | | | | | | | | | | | | | | Because of the reset_cpu is soc specific, should be move to soc Cc: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * Add unaligned.h for armSimon Kagstrom2009-07-19-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds unaligned.h for ARM (needed to build with LZO compression). The file is taken from the linux kernel, but includes u-boot headers instead. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by: Stefan Roese <sr@denx.de>
| | * Marvell MV88F6281GTW_GE Board supportPrafulla Wadaskar2009-07-18-0/+458
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is Marvell's 88F6281_A0 based custom board developed for wireless access point product This patch is tested for- 1. Boot from DRAM/SPI flash/NFS 2. File transfer using tftp and loadb 3. SPI flash read/write/erase 4. Booting Linux kernel and RFS from SPI flash 5. Boot from USB supported Reviewed-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| | * Marvell Sheevaplug Board supportPrafulla Wadaskar2009-07-18-1/+475
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-23-1/+26
|\ \ \ | |/ /
| * | Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2009-07-23-1/+26
| |\ \
| | * | i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2cHeiko Schocher2009-07-21-1/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the possibility to call a board specific i2c bus reset routine for the fsl_i2c bus driver, and adds this option for the keymile kmeter1 board. The deblock sequence for this board is implemented and tested in the following way: CR = 0x20 (release SDA and SCL pin) CR = 0xa0 (start read) dummy read dummy read if 2. dummy read == 0x00 3. dummy read CR = 0x80 (SDA and SCL now 1 SR = 0x86) CR = 0x00 (Modul reset SR=0x81) CR = 0x80 (SDA and SCL = 1, SR = 0x81) Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-23-268/+402
|\ \ \ \ | |/ / /
| * | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-07-23-268/+402
| |\ \ \
| | * | | 85xx/86xx: Replace in8/out8 with in_8/out_8 on FSL boardsKumar Gala2009-07-22-86/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pixis code used in8/out8 all over the place. Replace it with in_8/out_8 macros. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | xpedite5370: Enable NAND command supportPeter Tyser2009-07-22-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the MPC8572's eLBC to access 1 GB (or greater) onboard NAND flash via the 'nand' command. Previously, the XPedite5370's NAND chip selects were properly configured, but NAND support was not enabled. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | xes: Increase CONFIG_SYS_BOOTM_LEN to 16MBPeter Tyser2009-07-22-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to support uncompressing images larger than 8 MB when using the bootm command. Note that recent Linux kernels for the 85xx and 86xx map greater than 16MB of memory on bootup, but we use 16MB to maintain compatibility with older Linux kernels for now. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | xpedite5370: Fix I2C GPIO initialization typoPeter Tyser2009-07-22-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Heiko Schocher<hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | xpedite5200,5370: Use buffered NOR flash writesPeter Tyser2009-07-22-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffered writes are possible on the XPedite5200 and XPedite5370 and greatly improve NOR flash write speeds Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | 85xx, 86xx: Add common board_add_ram_info()Peter Tyser2009-07-22-41/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, 85xx and 86xx boards would display DRAM information on bootup such as: ... I2C: ready DRAM: Memory controller interleaving enabled: Bank interleaving! 2 GB FLASH: 256 MB ... This patch moves the printing of the DRAM controller configuration to a common board_add_ram_info() function which prints out DDR type, width, CAS latency, and ECC mode. It also makes the DDR interleaving information print out in a more sane manner: ... I2C: ready DRAM: 2 GB (DDR2, 64-bit, CL=4, ECC on) DDR Controller Interleaving Mode: bank FLASH: 256 MB ... Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | tqm85xx: Remove board_add_ram_info()Peter Tyser2009-07-22-30/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is in preparation for adding one common 8xxx board_add_ram_info() function for all 8xxx boards Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | xes: Remove 8xxx board_add_ram_info() functionPeter Tyser2009-07-22-53/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is in preparation for adding one common 8xxx board_add_ram_info() fuction for all 8xxx boards Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | 86xx: Rename ccsr_ddr's sdram_mode_1, sdram_cfg_1 fieldsPeter Tyser2009-07-22-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename sdram_mode_1 to sdram_mode and sdram_cfg_1 to sdram_cfg to match the 86xx user's manual and other Freescale architectures Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | 85xx: Add pci/pcie E1000 ethernet support for MPC8544DS and MPC8536 boardsRoy Zang2009-07-22-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | 85xx: Report which "bank" of NOR flash we are booting from on FSL boardsKumar Gala2009-07-22-14/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of swizzling the upper address bits of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCNKumar Gala2009-07-22-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8641HPCN board is capable of swizzling the upper address bit of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | | 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boardsKumar Gala2009-07-21-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have always mapped at least 16M in the kernel and we have seen cases with new kernel features that a kernel image needs more than 8M of memory. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | | Merge branch 'master' of /home/wd/git/u-boot/master/Wolfgang Denk2009-07-23-2018/+2275
| |\ \ \ \
| * \ \ \ \ Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2009-07-20-4/+0
| |\ \ \ \ \
| | * | | | | Remove last remanants of unused CONFIG_I2C_CMD_TREEPeter Tyser2009-07-20-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
| * | | | | | Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk2009-07-20-2/+2
| |\ \ \ \ \ \
| | * | | | | | ubi: help message correctionAndrzej Wolski2009-07-20-2/+2
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix incorrect information about size units and correct typo. Signed-off-by: Andrzej Wolski <awolski@poczta.fm> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | | Fix "ld: cannot find -lstubs" build errorWolfgang Denk2009-07-22-3/+3
| |_|/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1bc15386 moved the examples/ to examples/standalone but failed to adapt the Makefiles that need to link against libstubs.a Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | | | | Refresh LZMA-lib to v4.65Luigi 'Comio' Mantellini2009-07-22-1859/+2016
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
* | | | | | AT91: factor out ROUND() macroWolfgang Denk2009-07-22-10/+1
| |_|/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A large number of boards (all AT91 based) duplicated the ROUND() macro in their board specific config files. Add the definition to include/common.h and clean up the board config files. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | Move api_examples to examples/apiPeter Tyser2009-07-21-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also add a rule to remove demo.bin which was previously leftover after a "make clean" Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | | | 83xx, kmeter: fix compile errorHeiko Schocher2009-07-21-1/+0
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_MALLOC_LEN is defined in the board config, and the keymile-common.h, which collects common options used by all keymile-boards. This results in a compile error when compiling the kmeter1 board. So remove this define in the board config file. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | Move examples/ to examples/standalonePeter Tyser2009-07-21-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The current files in examples are all standalone application examples, so put them in their own subdirectory for organizational purposes Signed-off-by: Peter Tyser <ptyser@xes-inc.com>