summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* arm: Remove additional config flagsMichal Simek2012-10-04-10/+0
| | | | | | These options are just duplicated from arch/arm/cpu/armv7/config.mk Signed-off-by: Michal Simek <monstr@monstr.eu>
* armv7 cpu_init_crit: Simplify codeBenoît Thébaudeau2012-10-04-4/+1
| | | | | | | | We don't need to return to cpu_init_crit after calling lowlevel_init, so lowlevel_init can directly return to the caller of cpu_init_crit. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* arm: work around assembler bugAllen Martin2012-10-04-0/+18
| | | | | | | | | | | | | Disable sibling call optimization based on binutils version. This is to work around a bug in the assember in binutils versions < 2.22. Branches to weak symbols can be incorrectly optimized in thumb mode to a short branch (b.n instruction) that won't reach when the symbol gets preempted. http://sourceware.org/bugzilla/show_bug.cgi?id=12532 Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Tom Rini <trini@ti.com>
* tools, config.mk: add binutils-versionAllen Martin2012-10-04-0/+21
| | | | | | | Modeled after gcc-version, add function to get binutils version. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Wolfgang Denk <wd@denx.de>
* ARM: increase lmb stack space reservation to 4KBRob Herring2012-10-04-2/+2
| | | | | | | | | | The bootm initrd image copy to ram can collide with the stack in cases where the print buffer size is large (i.e. 1K). The result is intermittent initrd decompression errors depending on the initrd size MOD 4KB since the initrd start address is 4KB aligned. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* ARM: Add X600 board support (SPEAr600 based)Stefan Roese2012-10-04-0/+816
| | | | | | | | | | | | | This patch adds support for the X600 SPEAr600 based board. Its also the first SPEAr600 board that uses the newly introduced SPEAr600 SPL support. Xloader is not necessary any more. By using the new "u-boot.spr" make target, one image will generated containing both, U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and the main U-Boot with mkimage header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Amit Virdi <amit.virdi@st.com> Cc: Vipin Kumar <vipin.kumar@st.com>
* Merge remote-tracking branch 'u-boot-marvell/master'Albert ARIBAUD2012-10-03-21/+862
|\
| * lsxl: also turn off fan in power down modeMichael Walle2012-10-03-1/+5
| | | | | | | | | | | | | | | | If while booting the power switch is in OFF position, turn off the fan, too. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com>
| * km_kirkwood: enable MV88E6352_SWITCH support for kmnusaValentin Longchamp2012-10-03-0/+2
| | | | | | | | | | | | | | | | | | This is required to configure the external 88e6352 switch on nusa. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
| * arm/km: add mv88e6352 configuration for kmnusaValentin Longchamp2012-10-03-0/+65
| | | | | | | | | | | | | | | | | | | | | | The kmnusa board uses a mv88e6352 switch that is connected to the main eth interface of the kirkwood. Therefore the switch must be configured so that the kirkwood's egiga eth inferface can be used. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
| * edminiv2: increase malloc len to 256KAlbert ARIBAUD2012-10-03-1/+1
| | | | | | | | | | | | | | | | Malloc len of 128K caused a warning from ehci_hcd asking for more. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
| * ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.hDinh Nguyen2012-10-03-2/+0
| | | | | | | | | | | | | | | | | | include/common.h has the reset_cpu defined already. No need to re-define here. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Acked-By: Prafulla Wadaskar <Prafulla@marvell.com>
| * kirkwood: ib62x0: Invert SATA activity LEDsSimon Baatz2012-10-03-0/+7
| | | | | | | | | | | | | | | | | | | | | | The hardware design of the IB-NAS62x0 causes the SATA activity LEDs to be on when idle by default. Reverse the polarity of the activity LEDs in early init. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Cc: Luka Perkov <uboot@lukaperkov.net> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Luka Perkov <uboot@lukaperkov.net>
| * arm/km: use kw_sdram_size_adjust to adjust SDRAM sizeHolger Brunck2012-10-03-1/+2
| | | | | | | | | | | | | | | | | | | | | | Some boards may differ only in the SDRAM size. This function allows to fix the size accordingly and we can use the same u-boot binary for both boards. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
| * kirkwood: implement kw_sdram_size_adjustGerlando Falauto2012-10-03-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Size of the SDRAM chips might differ between any two (otherwise identical) instances of the same board. So add a function kw_sdram_size_adjust() which reads out the current ram size for a given bank, and adjusts the Kirkwood's SDRAM window size register accordingly. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
| * kirkwood: implement kw_sdram_bs_set()Gerlando Falauto2012-10-03-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some boards might be equipped with different SDRAM configurations. When that is the case, CPU CS Window Size Register (CS[0]n Size) should be set to the biggest value through board.cfg file; then its value can be fixed at runtime according to the detected SDRAM size. Therefore, implement kw_sdram_bs_set(). Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Marek Vasut <marex@denx.de> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
| * kirkwood: use c-struct for access to SDRAM addr decode registersHolger Brunck2012-10-03-6/+17
| | | | | | | | | | | | | | | | | | | | | | Remove the defines and do this with a C-struct. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Marek Vasut <marex@denx.de> Acked-By: Prafulla Wadaskar <Prafulla@marvell.com>
| * kirkwood: add support for Iomega iConnect boardLuka Perkov2012-10-03-0/+485
| | | | | | | | | | | | | | | | | | | | | | | | Add support for new board iConnect from Iomega. More information about the device can be found here: http://go.iomega.com/en/products/network-storage-desktop/wireless-data-station/network-hard-drive-iconnect/?partner=4735 Signed-off-by: Luka Perkov <uboot@lukaperkov.net> Tested-by: Wojciech Dubowik <wojciech.dubowik@neratec.com> Tested-by: Tim Fletcher <tim@night-shade.org.uk>
| * kirkwood: fix mpp.h coding styleLuka Perkov2012-10-03-1/+1
| | | | | | | | Signed-off-by: Luka Perkov <uboot@lukaperkov.net>
| * ARM: add support for d2 Network v2Simon Guinot2012-10-03-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the LaCie board d2 Network v2 which share a lot of hardware caracteristics with the 2Big Network v2. - CPU: Marvell 88F6281 1200Mhz - SDRAM memory: 256MB DDR2 400Mhz - 2 SATA ports: internal and eSATA - Gigabit ethernet: PHY Marvell 88E1116R - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports: host and host/device - 1 push button - 1 power switch - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
| * ARM: add support for Network Space v2 Lite and MiniSimon Guinot2012-10-03-7/+226
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the LaCie boards Network Space v2 (Lite and Mini). This two boards are derived from the Network Space v2 and a lot of hardware caracteristics are shared. - CPU: Marvell 88F6192 800Mhz - SDRAM memory: 128MB DDR2 200Mhz - 1 SATA port: internal - Gigabit ethernet: PHY Marvell 88E1318 - Flash memory: SPI NOR 512KB (Macronix MX25L4005A) - i2c EEPROM: 512 bytes (24C04 type) - 2 USB2 ports (Lite only): host and host/device - 1 push button - 1 SATA LED (bi-color, blue and red) Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
| * lacie_kw: add support for EFI partitionsSimon Guinot2012-10-03-0/+6
| | | | | | | | | | | | | | | | | | Defines CONFIG_EFI_PARTITION for LaCie boards. Additionally this patch defines CONFIG_DOS_PARTITION. Note that this definition is implicit in mv_common.h when CONFIG_CMD_USB is enabled. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* | ARM : Add support for MINI2440 (s3c2440).Gabriel Huau2012-10-03-0/+541
| | | | | | | | | | | | | | | | | | | | Support of the MINI2440 board from FriendlyARM from an old version of u-boot : http://repo.or.cz/r/u-boot-openmoko/mini2440.git Currently, supporting only boot from NOR. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
* | ARM : Add GPIO Driver and IOMUX definition for S3C2440Gabriel Huau2012-10-03-0/+467
|/ | | | | | | It's now possible to use the gpio driver interface for s3c2440. This patch add iomux definitions too. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
* rmobile: Fix build timer driver with BUILD_DIRNobuhiro Iwamatsu2012-10-03-2/+8
| | | | | | | | | | Rmobile common timer driver diverts the same driver as SH architecture. When it builds at the same place with source, it is no problem, but when it builds out of source, it cannot build. This patch revises this problem. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* i2c: sh: Remove irq_wait functionNobuhiro Iwamatsu2012-10-03-16/+0
| | | | | | | irq_wait function is not referred to from anywhere. Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* doc/git-mailrc: Add 'rmobile' aliasNobuhiro Iwamatsu2012-10-03-0/+1
| | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* rmobile: Add READMENobuhiro Iwamatsu2012-10-03-0/+65
| | | | | | | | This add README of Renesas RMOBILE. Based doc/README.omap3. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Tom Rini <trini@ti.com>
* rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHENobuhiro Iwamatsu2012-10-03-1/+0
| | | | | | | armadillo-800eva needs this config. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* rmobile: armadillo-800eva: Add Support NFS and BOOTZ commandNobuhiro Iwamatsu2012-10-03-0/+2
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* rmobile: armadillo-800eva: Add Support CONFIG_OF_LIBFDTNobuhiro Iwamatsu2012-10-03-0/+2
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* rmobile: armadillo-800eva: Change init function of SCIFA1Nobuhiro Iwamatsu2012-10-03-3/+5
| | | | | | | | | This initializes GPIO, without using PFC framework in board_early_init_f function. It is because it cannot initialize normally when PFC is used. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add cpu_eth_init functionNobuhiro Iwamatsu2012-10-03-0/+37
| | | | | | | This supports ethernet driver of RMOBILE R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: armadillo-800eva Remove board_eth_initNobuhiro Iwamatsu2012-10-03-5/+0
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add support for ATMARK-TECHNO Armadillo-800EVA boardHideyuki Sano2012-10-03-0/+552
| | | | | | | | | | | | | | The Armadillo-800EVA board has Renesas R-Mobile R8A7740, 512MB DDR3-SDRAM, Ethernet, and more. This patch supports the following functions: - 512MB DDR3-SDRAM - Serial console (SCIF) - Ethernet MAC(MII) & PHY(SMSC) Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add support PFC of Renesas R8A7740Nobuhiro Iwamatsu2012-10-03-1/+3200
| | | | | | | | | Renesas R8A7740 has GPIO based PFC. This privode framework of PFC. The code included in this base from linux kernel. Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add support Renesas R8A7740Nobuhiro Iwamatsu2012-10-03-0/+363
| | | | | | | | | Renesas R8A7740 is CPU with Cortex-A9. This supports the basic register definition and GPIO. Signed-off-by: Hideyuki Sano <hideyuki.sano.dn@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: Add CONFIG_GLOBAL_TIMER to board config fileNobuhiro Iwamatsu2012-10-03-0/+1
| | | | | | | | | | kzm9g board use global timer. But by commit 813ffda31, timer function of rmobile was changed that global timer might be used, when CONFIG_GLOBAL_TIMER was defined. This add CONFIG_GLOBAL_TIMER to board config file. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Add support TMU base timer functionNobuhiro Iwamatsu2012-10-03-2/+3
| | | | | | | Some rmobile SoC has TMU base timer function. This supports TMU. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Change initializing ICCICR registerNobuhiro Iwamatsu2012-10-03-0/+3
| | | | | | | | There is rmobile without ICCICR. ICCICR is initialized only when ICCICR is defined. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: remove unrelated configNobuhiro Iwamatsu2012-10-03-1/+0
| | | | | | | Remove CONFIG_ARM_CORTEXA9. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: Add LIBFDT supportNobuhiro Iwamatsu2012-10-03-1/+2
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: separate cpu_rev to integer and fractionTetsuyuki Kobayashi2012-10-03-9/+30
| | | | | | | | | | According to SoC document, revision info is separated to integer part and fracton part. So I separete rmobile_get_cpu_rev() to rmobile_get_cpu_rev_integer() and rmobile_get_cpu_rev_fraction(). Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: fix CPU infoTetsuyuki Kobayashi2012-10-03-4/+4
| | | | | | | CPU info register was read wrongly by mistake. And function rmobile_get_cpu_rev() was not called properly. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: remove unrelated configTetsuyuki Kobayashi2012-10-03-2/+0
| | | | | | | Remove CONFIG_INTEGRATOR and CONFIG_ARCH_CINTEGRATOR. These are not for kzm9g. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: add NFS_TIMEOUT in config fileTetsuyuki Kobayashi2012-10-03-0/+1
| | | | | | | Set NFS_TIMEOUT to 10,000 msec. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE settingTetsuyuki Kobayashi2012-10-03-1/+1
| | | | | | | | | The value of CONFIG_BAUDRATE is treated as string and put as initial value of environment variable. If it begin with '(', it is wrongly parsed to 0 in number. So I removed '(' and ')'. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdtTetsuyuki Kobayashi2012-10-03-0/+2
| | | | | | | | Add dummy member to struct sh73a0_rwdt in sh73a0.h. Without this, initializing watch dog timer goes wrong. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: Support build with gcc-4.6 or laterNobuhiro Iwamatsu2012-10-03-1/+27
| | | | | | | | | | | Latest rmobile code was tested by using old gcc (gcc-4.4). When we use gcc-4.6 (or later), the build is made, but does not work. This solves a problem not to work by add -march=armv5 to compiple option when we built in gcc-4.6 (or later). I tested by linaro's compiler version 2012.04-20120426. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* arm: rmobile: kzm9g: enable reset commandTetsuyuki Kobayashi2012-10-03-0/+6
| | | | | | | Do soft power on reset in U-Boot reset command. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
generated by cgit v1.1 at 2024-11-06 13:15:27 +0000