summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* mx6: Add initial support for the Hummingboard soloFabio Estevam2014-01-15-0/+675
| | | | | | | | | | | | | | | | SolidRun has designed the Hummingboard board based on mx6q/dl/solo. Add the initial support for the mx6 solo variant. More information about this hardware can be found at: http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware (Carrier-One was the previous name of Hummingboard). Based on the work from Jon Nettleton <jon.nettleton@gmail.com>. Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()Fabio Estevam2014-01-15-3/+16
| | | | | | | | | | Provide an argument to enable_fec_anatop_clock() to specify the clock frequency that will be generated. No changes are made to mx6slevk, which uses the default 50MHz fec clock. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6slevk: Include "mx6_common.h"Fabio Estevam2014-01-13-0/+1
| | | | | | | | Include "mx6_common.h" so that some ARM errata are applied and also the vddsoc regulator can be changed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx6: make use of lldiv(..)Christian Gmeiner2014-01-13-1/+2
| | | | | | | | | | Commit 762a88ccf8540948fbf8c31b40a29d1e0684a25b introduces a 64-bit division without using the lldiv() function, which pulls in previously unused libgcc stuff. Signed-off-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
* wandboard: Set default environment to use zImageJohn Weber2014-01-13-10/+10
| | | | | | | | | | | | | Change the default environment to use zImage instead of uImage, this requires changes to the default environment to load a file named zImage instead of uImage, and to use the 'bootz' command instead of 'bootm' when booting the kernel. The zImage works for FSL Linux's kernel fork versions 3.0.35, 3.10.9, and 3.10.17; this also works fine for mainline kernels. Signed-off-by: John Weber <rjohnweber@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx6sabresd: Add eMMC specific environment to allow U-Boot updateOtavio Salvador2014-01-13-0/+25
| | | | | | | | A new 'update_emmc_firmware' target is added to allow for easy U-Boot update in the eMMC as it has secury boot partition and this needs specific handling on how to program the specific partition. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* mx6slevk: Return from cpu_eth_init() directlyFabio Estevam2014-01-13-9/+1
| | | | | | | | | | There is no need to print an error message when cpu_eth_init() fails because net/eth.c already prints it. In order to simplify the code, just return the value from cpu_eth_init(bis) directly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: Return from cpu_eth_init() directlyFabio Estevam2014-01-13-7/+1
| | | | | | | | | | There is no need to print an error message when cpu_eth_init() fails because net/eth.c already prints it. In order to simplify the code, just return the value from cpu_eth_init(bis) directly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6qsabreauto: Return from cpu_eth_init() directlyFabio Estevam2014-01-13-7/+1
| | | | | | | | | | There is no need to print an error message when cpu_eth_init() fails because net/eth.c already prints it. In order to simplify the code, just return the value from cpu_eth_init(bis) directly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6qarm2: Remove unneeded error message when cpu_eth_init() failsFabio Estevam2014-01-13-5/+2
| | | | | | | There is no need to print an error message when cpu_eth_init() fails because net/eth.c already prints it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* titanium: Return from cpu_eth_init() directlyFabio Estevam2014-01-13-7/+1
| | | | | | | | | | | | There is no need to print an error message when cpu_eth_init() fails because net/eth.c already prints it. In order to simplify the code, just return the value from cpu_eth_init(bis) directly. Cc: Stefan Roese <sr@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
* wandboard: Return from cpu_eth_init() directlyFabio Estevam2014-01-13-7/+1
| | | | | | | | | | There is no need to print an error message when cpu_eth_init() fails because net/eth.c already prints it. In order to simplify the code, just return the value from cpu_eth_init(bis) directly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-06-1319/+5196
|\
| * board:trats2: fix default partitions and mmc envPiotr Wilczek2013-12-31-1/+2
| | | | | | | | | | | | | | | | | | This patch add uuid disk to defualt partions necessary to restore gpt partitions and fixes mmcdev environmental variable. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * board:trats1:trats2: fix adapter numberPiotr Wilczek2013-12-31-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | This fix is necessary after increased by one the number of adapters in s3c24x0 driver. Tested on Trats and Trats2. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SPL: EXYNOS: Prepare for variable size SPL supportRajeshwari Birje2013-12-30-44/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When variable size SPL is used, the BL1 expects the SPL to be encapsulated differently: instead of putting the checksum at a fixed offset in the SPL blob, prepend the blob with a header including the size and the checksum. The enhancements include - adding a command line option, '--vs' to indicate the need for the variable size encapsulation - padding the fixed size encapsulated blob with 0xff instead of random memory contents - do not silently truncate the input file, report error instead - no need to explicitly closing files/freeing memory, this all happens on exit; removing cleanups it makes code clearer - profuse commenting - modify Makefile to allow enabling the new feature per board Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Config: Add initial config for SMDK5420Rajeshwari Birje2013-12-30-280/+347
| | | | | | | | | | | | | | | | | | | | Adding initial config for SMDK5420 to build and boot U-Boot over Exynos based SMDK5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * DTS: Add dts support for SMDK5420Rajeshwari Birje2013-12-30-190/+441
| | | | | | | | | | | | | | | | | | | | | | This patch adds dts support for SMDK5420. exynos5.dtsi created is a common file which has the nodes common to both 5420 and 5250. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5420: Add base patch for SMDK5420Rajeshwari Birje2013-12-30-1/+229
| | | | | | | | | | | | | | | | | | | | | | Adding the base patch for Exynos based SMDK5420. This shall enable compilation and basic boot support for SMDK5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5420: Add support for 5420 in pinmux and gpioRajeshwari Birje2013-12-30-16/+390
| | | | | | | | | | | | | | | | | | | | Adds code in pinmux and gpio framework to support Exynos5420. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5420: Add DDR3 initialization for 5420Rajeshwari Birje2013-12-30-58/+484
| | | | | | | | | | | | | | | | | | This patch intends to add DDR3 initialization code for Exynos5420. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5420: Add clock initialization for 5420Rajeshwari Birje2013-12-30-202/+1679
| | | | | | | | | | | | | | | | | | | | This patch adds code for clock initialization and clock settings of various IP's and controllers, required for Exynos5420 Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * EXYNOS5420: Add dmc and phy_control register structureRajeshwari Birje2013-12-30-0/+167
| | | | | | | | | | | | | | | | Add dmc and phy_control register structure for 5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * EXYNOS5420: Add power register structure.Rajeshwari Birje2013-12-30-0/+837
| | | | | | | | | | | | | | | | Add structure for power register for Exynos5420 Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5420: Add base addresses for 5420Rajeshwari Birje2013-12-30-1/+48
| | | | | | | | | | | | | | | | | | | | Adds base addresses of various IPs and controllers required for Exynos5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * EXYNOS5: Create a common board fileRajeshwari Birje2013-12-30-527/+437
| | | | | | | | | | | | | | | | | | | | | | Create a common board.c file for all functions which are common across all EXYNOS5 platforms. exynos_init function is provided for platform specific code. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-06-3781/+3439
|\ \ | |/ |/| | | | | | | | | | | Conflicts: include/micrel.h The conflict above was trivial, caused by four lines being added in both branches with different whitepace.
| * arm: mx5: Add fuse supply enable in fsl_iimSergey Alyoshin2014-01-03-1/+28
| | | | | | | | | | | | | | Enable fuse supply before fuse programming and disable after. Signed-off-by: Sergey Alyoshin <alyoshin.s@gmail.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6Otavio Salvador2014-01-03-10/+11
| | | | | | | | | | | | | | | | | | | | The enable_fec_anatop_clock method should be available for all MX6 variant as it is not MX6 SoloLite specific. This moves the code out of the #ifdef/#endif and we make it conditional to CONFIG_FEC_MXC instead. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| * ARM: mx6: Change the FDT loading address to avoid overlapingOtavio Salvador2014-01-03-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes allow for the DeviceTree and initrd relocation fixing the boot of FSL 3.10.9-1.0.0-alpha kernel. This changes following boards: - mx6sabreauto - mx6sabresd - wandboard - udoo - nitrogen6x - cgtqmx6eval The reasoning, as explained by Hui Liu, is: ,---- | The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux kernel | Boot up, it will decompress the compressed kernel image and place the decompressed | kernel image at the low end of the DDR memory and start running from it. If the | decompressed kernel image is bigger for example than 16M, it may over written the | fdt blob which u-boot loaded to the DDR memory @0x11000000 with fdt_addr=0x11000000 | | To expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the override | Since we will not likely have one kernel image larger than 128MB. `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx28evk: Extend environment to easy write of NAND systemOtavio Salvador2014-01-03-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds following new targets: - update_nand_kernel - update_nand_fdt - update_nand_filesystem and to avoid confusion, the 'update_nand_full' has been renamed to 'update_nand_firmware_full'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx28evk: Add 'nandboot' environment commandOtavio Salvador2014-01-03-1/+17
| | | | | | | | | | | | | | | | | | This reads the kernel, ftd and boot into ubifs filesystem. While on that, the SD firmware filename definition has been moved next to the other SD related commands. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx28evk: Use 512k for fdt partition to align itOtavio Salvador2014-01-03-1/+1
| | | | | | | | | | | | | | | | Using 512k for fdt partition allow it to be aligned with the other small partitions and 512k erase block size. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| * imx: Easy enabling of SION per-pin using MUX_MODE_SION helper macroOtavio Salvador2014-01-03-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The macro allows easy setting in per-pin, as for example: ,---- | imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_MODE_SION); `---- The IOMUX_CONFIG_SION allows for reading PAD value from PSR register. The following quote from the datasheet: ,---- | ... | 28.4.2.2 GPIO Write Mode | The programming sequence for driving output signals should be as follows: | 1. Configure IOMUX to select GPIO mode (Via IOMUXC), also enable SION if need | to read loopback pad value through PSR | 2. Configure GPIO direction register to output (GPIO_GDIR[GDIR] set to 1b). | 3. Write value to data register (GPIO_DR). | ... `---- This fixes the gpio_get_value to properly work when a GPIO is set for output and has no conflicts. Thanks for Benoît Thébaudeau <benoit.thebaudeau@advansee.com>, Fabio Estevam <fabio.estevam@freescale.com> and Eric Bénard <eric@eukrea.com> for helping to properly trace this down. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx6: soc: Disable VDDPU regulatorFabio Estevam2014-01-02-0/+65
| | | | | | | | | | | | | | | | | | As U-boot does not use GPU/VPU peripherals, shutdown the VDDPU regulator in order to save power. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6: soc: Add the required LDO ramp up delayFabio Estevam2014-01-02-3/+20
| | | | | | | | | | | | | | | | | | | | When changing LDO voltages we need to wait for the required amount of time for the voltage to settle. Also, as the timer is still not available when arch_cpu_init() is called, we need to call it later at board_postclk_init() phase. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6: soc: Introduce set_ldo_voltage()Fabio Estevam2014-01-02-7/+26
| | | | | | | | | | | | Introduce set_ldo_voltage() so that all three LDO regulators can be configured. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6: soc: Set the VDDSOC at 1.175 VFabio Estevam2014-01-02-1/+1
| | | | | | | | | | | | | | | | | | | | mx6 datasheet specifies that the minimum VDDSOC at 792 MHz is 1.15 V. Add a 25 mV margin and set it to 1.175V. This also matches the VDDSOC voltages for 792MHz operation that the kernel configures: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/mach-mx6/cpu_op-mx6.c?h=imx_3.0.35_4.1.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltagesFabio Estevam2014-01-02-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since ROM may modify the LDO ramp up time according to fuse setting, it is safer to reset the ramp up field to its default value of 00: 00: 64 cycles of 24MHz clock; 01: 128 cycles of 24MHz clock; 02: 256 cycles of 24MHz clock; 03: 512 cycles of 24MHz clock; Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6: soc: Staticize set_vddsoc()Fabio Estevam2014-01-02-3/+1
| | | | | | | | | | | | set_vddsoc() is not used anywhere else, so make it static. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabre_common.h: Add CONFIG_CMD_FUSE supportFabio Estevam2014-01-02-0/+5
| | | | | | | | | | | | | | Add CONFIG_CMD_FUSE option, so that the fuse API can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * doc: README.fuse: Add an example on how to use the fuse API on mx6qFabio Estevam2014-01-02-0/+76
| | | | | | | | | | | | | | | | | | | | When using the fuse API in U-boot user must calculate the 'bank' and 'word' values. Provide a real example on how to calculate such values for the mx6q. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * MX6: fix sata compilation for i.MX6Stefano Babic2013-12-19-1/+2
| | | | | | | | | | | | | | Commit 164d98466103a46b7c881149e92ec2a28a6375be breaks board with SATA support, because sata is not compiled. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * imx6: fix random hang when download by usbFrank Li2013-12-17-0/+2
| | | | | | | | | | | | | | | | ROM did not invalidate L1 cache when download by usb Need invalidate L1 cache before enable cache Signed-off-by: Huang yongcai <b20788@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com>
| * ARM: mxs: tools: Fix errno handling in strtoul() invocationMarek Vasut2013-12-17-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to NOTE in strtoul(3), the errno must be zeroed before strtoul() is called. Zero the errno. The NOTE reads as such: Since strtoul() can legitimately return 0 or ULONG_MAX (ULLONG_MAX for strtoull()) on both success and failure, the calling program should set errno to 0 before the call, and then determine if an error occurred by checking whether errno has a nonzero value after the call. This issue was detected on Fedora 19 with glibc 2.17 . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
| * mx6sabresd: Fix LVDS width and color formatFabio Estevam2013-12-17-3/+3
| | | | | | | | | | | | | | | | mx6sabresd boards have a 18-bit LVDS data width and the correct color format is RGB666. Suggested-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabresd: Allow probing HSYNC, VSYNC and DISP_CLK signalsFabio Estevam2013-12-17-0/+9
| | | | | | | | | | | | | | | | HSYNC, VSYNC and DISP_CLK are very useful display signals for debugging. Configure them as active pins. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6: clock: Fix the calculation of PLL_ENET frequencyFabio Estevam2013-12-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the mx6 quad reference manual, the DIV_SELECT field of register CCM_ANALOG_PLL_ENETn has the following meaning: "Controls the frequency of the ethernet reference clock. - 00 - 25MHz - 01 - 50MHz - 10 - 100MHz - 11 - 125MHz" Current logic does not handle the 25MHz case correctly, so fix it. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * ARM: mx53: video: Add IPUv3 LCD support for M53EVKMarek Vasut2013-12-17-0/+89
| | | | | | | | | | | | | | | | This patch adds support for the AMPIRE 800x480 LCD panel that is available for M53EVK. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * MX6 SabreSD: Use readl() to read the CCM_CCGR3 registerLiu Ying2013-12-17-1/+1
| | | | | | | | | | | | | | | | Align with the context to use readl() to read the CCM_CCGR3 register with memory barrier instead of __raw_readl(). Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-08-26 07:29:26 +0000