summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
* MLK-10774-18 imx:mx6qarm2 update bspPeng Fan2015-04-29-11/+318
* MLK-10774-17 imx:mx6sabresd update bspPeng Fan2015-04-29-483/+934
* MLK-10774-16 imx:mx6sxsabresd update board and configPeng Fan2015-04-29-126/+697
* MLK-10774-15 imx:mx6slevk update board codePeng Fan2015-04-29-14/+184
* MLK-10774-14 imx:mx6sx fix pad settingsPeng Fan2015-04-29-1/+5
* MLK-10774-13 imx:mx6 update header files in arch-mx6Peng Fan2015-04-29-25/+749
* ENGR00315894-59 iMX6SX: Add RDC mappings of masters and peripheralsYe.Li2015-04-29-0/+159
* MLK-10774-12 imx:mx6 update habPeng Fan2015-04-29-9/+16
* MLK-10774-11 mx6: clock: Modify GPMI clock to support mx6sxPeng Fan2015-04-29-0/+13
* MLK-10774-10 imx:mx6sx add mx6sx support for pcie power downPeng Fan2015-04-29-0/+6
* ENGR00325255 pcie:enable pcie support on imx6sx sdRichard Zhu2015-04-29-6/+38
* ENGR00319151-2 HAB: Add the HAB image authentication to bootzYe.Li2015-04-29-0/+9
* MLK-10774-9 common: add sata commandPeng Fan2015-04-29-4/+177
* MLK-10774-8 env_mmc: add the dynamtic mmc dev supportPeng Fan2015-04-29-8/+14
* MLK-10774-7 Auto check if boot from usbPeng Fan2015-04-29-0/+52
* MLK-10035-2: supports NAND chips with oob size up to 744 byteAllen Xu2015-04-29-9/+17
* ENGR00325088 video: mxsfb: Disable LCDIF correctlyLiu Ying2015-04-29-5/+9
* ENGR00315894-60 GPIO: Modify driver mxc_gpio to support RDC SemaphoresYe.Li2015-04-29-0/+51
* ENGR00315894-33 gpmi: use the same ECC strength as used in the kernelYe.Li2015-04-29-19/+13
* ENGR00315499-22 video: ipu: wait for DP SF end irq when disabling sync BG flowLiu Ying2015-04-29-3/+3
* MLK-10774-6 imx: add mxc_keybPeng Fan2015-04-29-0/+834
* ENGR00315499-18 driver:MAX7310: Add GPIO expander driver for MAX7310Ye.Li2015-04-29-0/+241
* MLK-10774-5 Add EPDC splash screen for MX 6DL SabreSD and 6SL EVKPeng Fan2015-04-29-1/+1721
* MLK-10774-4 fsl:qspi update qspi driverPeng Fan2015-04-29-596/+684
* ENGR00328312 i2c: imx: Optimize the i2c device recovery solutionFugang Duan2015-04-29-2/+25
* ENGR00321435-1 imx-common: cpu: Disable mxsfb when necessaryLiu Ying2015-04-29-0/+4
* ENGR00315894-81 gis: Add gis moduleYe.Li2015-04-29-0/+640
* ENGR00315894-80 pxp: Add pxp moduleYe.Li2015-04-29-0/+324
* ENGR00315894-79 csi: Add csi moduleYe.Li2015-04-29-0/+425
* ENGR00315894-78 vadc: Add vadc moduleYe.Li2015-04-29-0/+602
* ENGR00315894-70 iMX6SX:Video Update MXS LCDIF driverYe.Li2015-04-29-13/+67
* ENGR00315894-58 RDC: Add an iMX platform driver for RDC-SEMAYe.Li2015-04-29-0/+319
* ENGR00315894-55 iMX6SX: add debug monitor supportYe.Li2015-04-29-0/+25
* ENGR00331269 arm: mx6: select OSC as uart's clk parentAnson Huang2015-04-29-0/+9
* ENGR00322860 iMX6SX: Add function to check M4 status before bootingYe.Li2015-04-29-1/+31
* ENGR00315894-56 CMD: Add new command "bootaux" to boot auxiliary coreYe.Li2015-04-29-0/+43
* ENGR00321299 gis: clean csi0 input mux set bit in GPRSandor Yu2015-04-29-0/+6
* ENGR00321260-1 iMX6: Add support to get CPU serial numberYe.Li2015-04-29-0/+13
* ENGR00320350 iMX6SLEVK: Fix build warning of PCIE Phy power downYe.Li2015-04-29-0/+2
* ENGR00319965 pcie: mask the imx6sl outRichard Zhu2015-04-29-2/+7
* ENGR00319415 pcie: random link down issue after warm-rstRichard Zhu2015-04-29-0/+18
* ENGR00315894-77 mx6 soc: Add vadc power up/down functionYe.Li2015-04-29-0/+59
* ENGR00315894-76 mx6 clock: Add vadc clock enable functionYe.Li2015-04-29-0/+11
* ENGR00315894-71 iMX6SX Update registers and clock for displayYe.Li2015-04-29-0/+445
* ENGR00315894-57 iMX6SX: Add M4 boot support at soc levelYe.Li2015-04-29-0/+29
* MLK-10774-3 iMX6SX/SL: Modify SOC to support two ENETPeng Fan2015-04-29-6/+48
* ENGR00315894-11 i.mx6:shutdown vddpu and pcie phy to save powerYe.Li2015-04-29-0/+31
* MLK-10774-2 HDMI: splash screen function enhancementPeng Fan2015-04-29-31/+76
* MLK-10774-1 imx: LDO: add LDO bypassPeng Fan2015-04-29-0/+156
* Prepare v2015.04Tom Rini2015-04-13-1/+1
generated by cgit v1.1 at 2024-11-06 10:35:04 +0000