summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* pmic: dialog: Avoid name conflictsFabio Estevam2012-05-15-4/+5
| | | | | | | | | | As mx53loco board has two variants: one with Dialog PMIC and another with FSL MC34708 PMIC, we need to be able to build both drivers. Change pmic_init() and PMIC_NUM_OF_REGS names to avoid build conflicts when both drivers are present. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: Add u-boot.imx as target for ARM9 i.MX SOCsTimo Ketola2012-05-15-0/+6
| | | | | Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX2: Include asm/types.h in arch-mx25/imx-regs.hTimo Ketola2012-05-15-0/+3
| | | | | | | | | | | | | types.h must be included in imx-regs.h if one wants to include imx-regs.h in a board configuration file. That for one's part is necessary, if one wants to use addresses defined in imx-regs.h. For example, fsl_esdhc.c needs CONFIG_SYS_FSL_ESDHC_ADDR defined and a proper thing is to define it with IMX_MMC_SDHCx_BASE in board configuration file. This patch fixes the build in that case. Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: usb: There is no such registerTimo Ketola2012-05-15-2/+0
| | | | | | | | | The reference manual of i.MX25 (nor i.MX31) does not define such register. This seems to access read only UH2_CAPLENGTH register (if CONFIG_MXC_USB_PORT is zero). Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX25: usb: Set PORTSCx registerTimo Ketola2012-05-15-2/+0
| | | | | | | | | The USB controller in i.MX25 has a PORTSCx registers which should be set. In this regard it is similar to the controller in i.MX31. As this file is compiled only with i.MX25 and -31, #ifdef check can be removed. Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* imx: nand: Support flash based BBTTimo Ketola2012-05-15-0/+33
| | | | | Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Scott Wood <scottwood@freescale.com>
* i.MX25: This architecture has a GPIO4 tooTimo Ketola2012-05-15-1/+2
| | | | | Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX25: esdhc: Add mxc_get_clock infrastructureTimo Ketola2012-05-15-0/+50
| | | | | | | | | Defining CONFIG_FSL_ESDHC brings in a call to get_clocks, so let's implement get_clocks function. This is how it seems to be implemented elsewhere. Signed-off-by: Timo Ketola <timo@exertus.fi> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX6: mx6q_sabrelite: add SATA bindingsEric Nelson2012-05-15-0/+44
| | | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: stefano Babic <sbabic@denx.de>
* i.MX6: add enable_sata_clock()Eric Nelson2012-05-15-0/+152
| | | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
* i.MX6: Add ANATOP regulator initDirk Behme2012-05-15-0/+32
| | | | | | | | | | | | | | | | Init the core regulator voltage to 1.2V. This is required for the correct functioning of the GPU and when the ARM LDO is set to 1.225V. This is a workaround to fix some memory clock jitter. Note: This should be but can't be done in the DCD. The bootloader prevents access to the ANATOP registers. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> CC: Jason Chen <b02280@freescale.com> CC: Jason Liu <r64343@freescale.com> CC: Ranjani Vaidyanathan <ra5478@freescale.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <festevam@gmail.com>
* mx28evk: add NAND supportLauri Hintsala2012-05-15-0/+31
| | | | | | | | NAND support is not enabled by default because Eval Kit is not delivered with NAND chip. To enable NAND support add CONFIG_CMD_NAND to board config. Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by: Marek Vasut <marex@denx.de>
* USB: ehci-mx6: Fix broken IO accessWolfgang Grandegger2012-05-15-2/+3
| | | | | | | | | | To get USB working again on the i.MX6, this patch fixes a bug introduced with commit 522b2a0 "Add proper IO accessors for mx6 usb registers.". At that occasion, I also added the missing __iomem directive. Cc: Marek Vasut <marex@denx.de> CC: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfgang Grandegger <wg@denx.de>
* M28: Scan only first 512 MB of DRAM to avoid memory wraparoundMarek Vasut2012-05-15-1/+1
| | | | | | | | Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com>
* Revert "i.MX28: Enable additional DRAM address bits"Marek Vasut2012-05-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 69d26d09de1cb93e0a09ca71d9f0d41a66f0756a. Apparently, this commit got mainline only because of out-of-tree port and causes breakage on board that is mainline. Revert. Reason: * The OOT board has 512MB of DRAM, enabling this additional address line enabled it to work fine with 512MB of RAM. * Every mainline port has max. 256MB of DRAM, therefore this revert has no impact on any mainline port * Though this caused a problem with new M28 board with 256MB of DRAM where the chips are wired differently. The patch-to-be-reverted caused the DRAM to behave like this: [128MB chunk #1][128MB chunk #1 again][128MB chunk #2][128MB chunk #2 again] Therefore to retain the current one-memory-init-rules-them-all situation, revert this patch until another board emerges and will actually be pushed mainline that needs different setup. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com>
* M28: Enable FDT supportMarek Vasut2012-05-15-0/+2
| | | | | | | | | | | This will eventually be needed with Linux 3.5, which will be the point when MXS will be switched to FDT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com>
* mx53loco: Add support for 1GHz operation for DA9053-based boardsFabio Estevam2012-05-15-0/+85
| | | | | | | | | | | | | | | There are two types of mx53loco boards: initial boards were built with a Dialog DA9053 PMIC and more recent version is based on a Freescale MC34708 PMIC. Add DA9053 PMIC support and adjust the required voltages and clocks for running the CPU at 1GHz. Tested on both versions of mx53loco boards. In the case of a MC34708-based board the CPU operating voltage remains at 800MHz. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by : Stefano Babic <sbabic@denx.de>
* mx53loco: Allow to print CPU information at a later stageFabio Estevam2012-05-15-2/+24
| | | | | | | | | | | Print CPU information within board_late_init(). This is in preparation for adding 1GHz support, which requires programming a PMIC via I2C. As I2C is only available after relocation, print the CPU information later at board_late_init(), so that the CPU frequency can be printed correctly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx5: Add clock config interfaceFabio Estevam2012-05-15-5/+454
| | | | | | | | | | | mx5: Add clock config interface Add clock config interface support, so that we can configure CPU or DDR clock in the later init Signed-off-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* imx-common: Factor out get_ahb_clk()Fabio Estevam2012-05-15-34/+24
| | | | | | | | | get_ahb_clk() is a common function between mx5 and mx6. Place it into imx-common directory. Cc: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flowEric Nelson2012-05-15-2/+123
| | | | | | | | | Uses the 'magic_keys' idiom as described in doc/README.kbd: http://lists.denx.de/pipermail/u-boot/2012-April/122502.html Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* mx31pdk: Allow booting a zImage kernelFabio Estevam2012-05-15-0/+1
| | | | | | Allow booting a zImage kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6qarm2: Allow booting a zImage kernelFabio Estevam2012-05-15-0/+1
| | | | | | | | Allow booting a zImage kernel. Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <r64343@freescale.com>
* mx6qsabrelite: Allow booting a zImage kernelFabio Estevam2012-05-15-0/+1
| | | | | | | Allow booting a zImage kernel. Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: Allow booting a zImage kernelFabio Estevam2012-05-15-0/+1
| | | | | | Allow booting a zImage kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* m28evk: Allow to booting a dt kernelFabio Estevam2012-05-15-0/+1
| | | | | | Allow to booting a dt kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx28evk: Allow to booting a dt kernelFabio Estevam2012-05-15-0/+1
| | | | | | Allow to booting a dt kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6qsabrelite: No need to set the direction for GPIO3_23 againFabio Estevam2012-05-15-1/+1
| | | | | | | | | | There is a 'gpio_direction_output(87, 0);' call previously, so the GPIO direction is already established. Use gpio_set_value() for changing the GPIO output then. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@googlemail.com>
* pmic: Add support for the Dialog DA9053 PMICFabio Estevam2012-05-15-0/+225
| | | | | | Add support for the Dialog DA9053 PMIC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX53: mx53loco: Add SATA supportStefano Babic2012-05-15-0/+14
| | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jason Liu <jason.hui@linaro.org> Acked-by: Jason Liu <jason.hui@linaro.org>
* MX53: Add support to ESG ima3 boardStefano Babic2012-05-15-0/+721
| | | | | | | | The ESG ima3-mx53 board is based on the Freescale i.MX53 SOC. It boots from NOR (128 MB) and supports Ethernet (FEC), SATA. Signed-off-by: Stefano Babic <sbabic@denx.de>
* SATA: add driver for MX5 / MX6 SOCsStefano Babic2012-05-15-2/+1308
| | | | | | | | | | This driver is part of Freescale's LTIB for MX5 / MX6. Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Terry Lv <r65388@freescale.com> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Dirk Behme <dirk.behme@de.bosch.com>
* MX53: add function to set SATA clock to internalStefano Babic2012-05-15-0/+25
| | | | | | | | | | | | | | | | | | | | | The MX53 SATA interface can use an internal clock (USB PHY1) instead of an external clock. This is an undocumented feature, but used on most Freescale's evaluation boards, such as MX53-loco. As stated by Freescale's support: Fuses (but not pins) may be used to configure SATA clocks. Particularly the i.MX53 Fuse_Map contains the next information about configuring SATA clocks : SATA_ALT_REF_CLK[1:0] (offset 0x180C) '00' - 100MHz (External) '01' - 50MHz (External) '10' - 120MHz, internal (USB PHY) '11' - Reserved Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
* SATA: check for return value from sata functionsStefano Babic2012-05-15-3/+6
| | | | | | | | | sata functions are called even if previous functions failed because return value is not checked. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Dirk Behme <dirk.behme@de.bosch.com> CC: Fabio Estevam <fabio.estevam@freescale.com>
* MX5: Add definitions for SATA controllerStefano Babic2012-05-15-0/+4
| | | | | | | | | Add base address and MXC_SATA_CLK to return the clock used for the SATA controller. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Dirk Behme <dirk.behme@de.bosch.com>
* NET: fec_mxc.c: Add a way to disable auto negotiationStefano Babic2012-05-15-1/+3
| | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
* Define UART4 and UART5 base addressesStefano Babic2012-05-15-0/+5
| | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
* EXYNOS: Change bits per pixel value proper for u-boot.Donghwa Lee2012-05-15-5/+5
| | | | | | | | | | vl_bpix of vidinfo_t was changed proper value for u-boot. It is used to multiple of 2 by using NBITS() macro. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS: support TRATS board display functionDonghwa Lee2012-05-15-0/+154
| | | | | | | | | This patch support TRATS board configuration and display function. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSIDonghwa Lee2012-05-15-0/+257
| | | | | | | | | This patch support S6E8AX0 amoled driver based on EXYNOS MIPI DSI interface. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* EXYNOS: support EXYNOS MIPI DSI interface driver.Donghwa Lee2012-05-15-0/+2264
| | | | | | | | | | | | | | | | | EXYNOS SoC platform has MIPI-DSI controller and MIPI-DSI based LCD Panel could be used with it. This patch supports MIPI-DSI driver based Samsung SoC chip. LCD panel driver based MIPI-DSI should be registered to MIPI-DSI driver at board file and LCD panel driver specific function registered to mipi_dsim_ddi structure at lcd panel init function called system init. In the MIPI-DSI driver, find lcd panel driver by using registered lcd panel name, and then initialize lcd panel driver. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* EXYNOS: support EXYNOS framebuffer and FIMD display drivers.Donghwa Lee2012-05-15-0/+990
| | | | | | | | | This patch support EXYNOS FB and FIMD display drivers. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* LCD: add data structure for EXYNOS display driverDonghwa Lee2012-05-15-0/+64
| | | | | | | | | Add vidinfo data structure for EXYNOS display driver Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Acked-by: Anatolij Gustschin <agust@denx.de>
* EXYNOS: add LCD and MIPI DSI clock interface.Donghwa Lee2012-05-15-0/+187
| | | | | | | | | To sets up lcd and mipi clock in EXYNOS display driver, added clock interface. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS: definitions of system resgister and power management registers.Donghwa Lee2012-05-15-1/+167
| | | | | | | | | This is definitions of system registers and power mananagement registers for EXYNOS SoC. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SMDK5250: fix compiler warningMinkyu Kang2012-05-15-1/+1
| | | | | | | | | this patch fixed following warning. tzpc_init.c: In function 'tzpc_init': tzpc_init.c:35: warning: assignment from incompatible pointer type Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Chander Kashyap <chander.kashyap@linaro.org>
* misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998Łukasz Majewski2012-05-15-18/+11
| | | | | | | | TRATS target uses MAX8997 PMIC device instead of MAX8998. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
* misc:pmic:max8997 MAX8997 support for PMIC driverŁukasz Majewski2012-05-15-0/+234
| | | | | | | | This commit adds support for MAX8997 PMIC driver. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Stefano Babic <sbabic@denx.de>
* TRATS: modify the trats's configurationJaehoon Chung2012-05-15-3/+2
| | | | | | | | | | Trats is supported 1GiB memory size. (Each bank size is 512MB.) And INITRD is unnecessary. So removed them. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurementŁukasz Majewski2012-05-15-3/+23
| | | | | | | | | | | | | | This patch enables LDO4 power line for preparing proper voltages to be measured by ADC converter. This measurement is used for determination of target board HW revision. Test HW: Universal_C210 (Exynos4210) rev. 0.0 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>