summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval boardStefan Roese2007-06-19-1/+112
| | | | | | | | | | | This patch adds a board command to configure the I2C bootstrap EEPROM values. Right now 533 and 667MHz are supported for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 533 nor ;to configure the board for 533MHz NOR booting => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>
* [ppc4xx] Fix problem with NAND booting on AMCC AcadiaStefan Roese2007-06-19-11/+34
| | | | | | | | The latest changes showed a problem with the location of the NAND-SPL image in the OCM and the init-data area (incl. cache). This patch fixes this problem. Signed-off-by: Stefan Roese <sr@denx.de>
* [ppc4xx] Change board/amcc/acadia/cpr.c to pll.cStefan Roese2007-06-19-0/+0
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* [ppc4xx] Change lwmon5 port to work with recent 440 exception reworkStefan Roese2007-06-15-0/+1
| | | | | | Now CONFIG_440 has to be defined in all PPC440 board config files. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge with /home/stefan/git/u-boot/denx-440-exceptionsStefan Roese2007-06-15-267/+319
|\
| * ppc4xx: Clean up 440 exceptions handlingGrzegorz Bernacki2007-06-15-267/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Introduced dedicated switches for building 440 and 405 images required for 440-specific machine instructions like 'rfmci' etc. - Exception vectors moved to the proper location (_start moved away from the critical exception handler space, which it occupied) - CriticalInput now serviced (with default handler) - MachineCheck properly serviced (added a dedicated handler and return subroutine) - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, unhandled and those not relevant for 4xx were eliminated) - Eliminated Linux leftovers, removed dead code Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Rafal Jaworowski <raj@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | [ppc4xx] Add initial lwmon5 board supportStefan Roese2007-06-15-10/+2346
| | | | | | | | | | | | | | This patch adds initial support for the Liebherr lwmon5 board euqipped with an AMCC 440EPx PowerPC. Signed-off-by: Stefan Roese <sr@denx.de>
* | [ppc4xx] Extend 44x GPIO setup with default output stateStefan Roese2007-06-15-68/+108
| | | | | | | | | | | | | | The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup is extended with the default GPIO output state (level). Signed-off-by: Stefan Roese <sr@denx.de>
* | [ppc4xx] Extend program_tlb() with virtual & physical addressesStefan Roese2007-06-14-37/+48
| | | | | | | | | | | | | | | | | | Now program_tlb() allows to program a TLB (or multiple) with different virtual and physical addresses. With this change, now one physical region (e.g. SDRAM) can be mapped 2 times, once with caches diabled and once with caches enabled. Signed-off-by: Stefan Roese <sr@denx.de>
* | [PATCH] fix gpio setting when using CFG_440_GPIO_TABLEBenoît Monin2007-06-08-2/+2
|/ | | | | | | | Set the correct value in GPIOx_TCR when configuring the gpio with CFG_440_GPIO_TABLE. Signed-off-by: Benoit Monin <bmonin@adeneo.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* Coding Style cleanup; generate new CHANGELOG file.Wolfgang Denk2007-06-06-24/+505
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk2007-06-06-29/+25
|\
| * Merge branch 'mpc8641'Jon Loeliger2007-06-05-29/+21
| |\
| | * mpc8641 image size cleanupEd Swarthout2007-06-05-29/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e600 does not have a bootpg restriction. Move the version string to beginning of image at fff00000. Resetvec.S is not needed. Update flash copy instructions. Add tftpflash env variable Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | Merge branch 'mpc8641'Jon Loeliger2007-05-10-0/+4
| |\ \ | | |/
| | * 8641hpcn: Fix Makefile after moving pixis to board/freescale.Ed Swarthout2007-05-08-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | The OBJTREE != SRCTREE build scenario was broken. This fixes it. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | | Merge with /home/wd/git/u-boot/custodian/u-boot-armWolfgang Denk2007-06-06-346/+1556
|\ \ \
| * \ \ Add support for the Siemens SMN42 board.Gary Jennejohn2007-05-18-346/+1556
| |\ \ \
| | * | | Reduce line lengths to 80 characters max.Peter Pearse2007-05-18-12/+25
| | | | |
| | * | | Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-05-18-375/+2907
| | |\ \ \
| | * | | | Makefile permissionsPeter Pearse2007-05-18-0/+0
| | | | | |
| | * | | | Add the board directory for SMN42Peter Pearse2007-05-09-0/+796
| | | | | |
| | * | | | Add the files for the SMN42 boardPeter Pearse2007-05-09-0/+2303
| | | | | |
| | * | | | Remove the deleted files for the SMN42 patchPeter Pearse2007-05-09-1677/+0
| | | | | |
| | * | | | New board SMN42 branchPeter Pearse2007-05-09-268/+43
| | | | | |
| * | | | | Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-05-18-375/+2907
| |\ \ \ \ \ | | | |/ / / | | |/| | |
| * | | | | Makefile permissionsPeter Pearse2007-05-18-0/+0
| | |/ / / | |/| | |
| * | | | Makefile permissionsPeter Pearse2007-05-09-0/+0
| | |/ / | |/| |
* | | | Merge with /home/stefan/git/u-boot/acadia-nand-bootStefan Roese2007-06-06-70/+685
|\ \ \ \
| * | | | ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval boardStefan Roese2007-06-06-70/+685
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds NAND booting support for the AMCC Acadia eval board. Please make sure to configure jumper J7 to position 2-3 when booting from NOR, and to position 1-2 when booting for NAND. I also added a board command to configure the I2C bootstrap EEPROM values. Right now only 267MHz is support for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 267 nor ;to configure the board for 267MHz NOR booting => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk2007-06-04-646/+1250
|\ \ \ \ \ | |/ / / /
| * | | | [PATCH] Fix ppc4xx bootstrap letter displayed on startupBenoît Monin2007-06-04-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The attached patch is mainly cosmetic, allowing u-boot to display the correct bootstrap option letter according to the datasheets. The original patch was extended with 405EZ support by Stefan Roese. Signed-off-by: Benoit Monin <bmonin@adeneo.eu> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | ppc4xx: Add missing file for Bamboo NAND booting supportStefan Roese2007-06-01-0/+137
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | Merge with /home/stefan/git/u-boot/bamboo-nandStefan Roese2007-06-01-637/+1098
| |\ \ \ \
| | * | | | ppc4xx: Update Sequoia NAND booting support with ECCStefan Roese2007-06-01-8/+20
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval boardStefan Roese2007-06-01-119/+536
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds NAND booting support for the AMCC Bamboo eval board. Since the NAND-SPL boot image is limited to 4kbytes, this version only supports the onboard 64MBytes of DDR. The DIMM modules can't be supported, since the setup code for I2C DIMM autodetection and configuration is too big for this NAND bootloader. Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.cStefan Roese2007-06-01-39/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The U-Boot NAND booting support is now extended to support ECC upon loading of the NAND U-Boot image. Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | ppc4xx: Prepare Bamboo port for NAND booting supportStefan Roese2007-06-01-109/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the "normal" Bamboo NOR booting port, so that it is compatible with the coming soon NAND booting Bamboo port. It also enables the 2nd NAND flash on the Bamboo. Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | ppc4xx: Update in_be32() functions and friends to latest Linux versionStefan Roese2007-06-01-34/+55
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.cStefan Roese2007-06-01-20/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds hardware ECC support to the NDFC driver. It also changes the register access from using the "simple" in32/out32 functions to the in_be32/out_be32 functions, which make sure that the access is correctly synced. This is the only recommended access to SoC registers in the current Linux kernel. Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | NAND: Update nand_ecc.c to latest Linux versionStefan Roese2007-06-01-136/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the nand_ecc code to the latest Linux version. The main reason for this is the more compact code. This makes it possible to include the ECC code into the NAND bootloader image (NAND_SPL) for PPC4xx. Signed-off-by: Stefan Roese <sr@denx.de>
| | * | | | ppc4xx: 44x DDR driver code cleanup and small fix for BambooStefan Roese2007-06-01-175/+166
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHzStefan Roese2007-06-01-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch undoes the patch by Jeff Mann with commit-id ada4697d. As suggested by AMCC it is not recommended to dynamically change the EBC speed after bootup. So we undo this change to be on the safe side. Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | ppc4xx: Change Luan config file to support ECCStefan Roese2007-06-01-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the updated 44x DDR2 driver the Luan board now supports ECC generation and checking. Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)Stefan Roese2007-06-01-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add config option for 180 degree advance clock control as needed for the AMCC Luan eval board. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | Merge with /home/wd/git/u-boot/stx-gp3ssaWolfgang Denk2007-05-31-21/+35
|\ \ \ \ \ \ | |/ / / / / |/| | | | |
| * | | | | Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.Wolfgang Denk2007-05-31-21/+35
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | Merge with /home/tur/git/u-boot#motionproWolfgang Denk2007-05-28-91/+190
|\ \ \ \ \ \
| * | | | | | Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.Bartlomiej Sieka2007-05-27-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | | | | | Motion-PRO: Add support for redundant environment.Bartlomiej Sieka2007-05-27-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable redundant environment, add a MTD partition for it; also add env. variable command for passing MTD partitions to the kernel command line. Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
generated by cgit v1.1 at 2024-11-05 14:18:01 +0000