summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* mpc85xx/t1040qds: convert deep sleep to generic board interfacetang yuantian2015-01-16-12/+33
| | | | | | | | A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t102xqds: convert deep sleep to generic board interfacetang yuantian2015-01-16-12/+33
| | | | | | | | A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1024rdb: Add support for T1024RDB-PBShengzhou Liu2015-01-16-4/+63
| | | | | | | | | T1024RDB-PB board adds 2.5G SGMII support with AQR105 PHY. rcw_0x095 is used for 10G XFI + 3x PCIex1 rcw_0x135 is used for 2.5G SGMII + 2x PCIex1 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t102xrdb: convert deep sleep to generic board interfacetang yuantian2015-01-16-21/+49
| | | | | | | | | | A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Besides, added SPI/SD/NAND boot deep sleep support. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* t1024qds: add missing T1024QDS_defconfigShengzhou Liu2015-01-16-0/+4
| | | | | | | Add missing T1024QDS_defconfig for NOR boot on T1024QDS. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1024: add serdes protocol 0x40 and 0x5fShengzhou Liu2015-01-16-0/+2
| | | | | | | Add serdes protocol 0x40 and 0x5f. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: SECURE BOOT- Add secure boot target for T1042RDBgaurav rana2015-01-16-0/+5
| | | | | | | Secure boot target is added for T1042RDB platform. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/913x: Add config flag for bootdelayharninder rai2015-01-16-0/+2
| | | | | | | | | CONFIG_BOOTDELAY is missing from board header file. Add this macro to enable counting down of auto boot. Signed-off-by: Harninder Rai <harninder.rai@freescale.com> [York Sun: Add commit message] Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Define PBI Flash Base for C29XPCIE Secure BootAneesh Bansal2015-01-16-0/+2
| | | | | | | CONFIG_SYS_PBI_FLASH_BASE is defined for Secure Boot on C29X Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* b4860: Correct LIODN assignment for PCIeTudor Laurentiu2015-01-16-1/+1
| | | | | | | | | | | For B4 the LIODN register for PCIe is in PCIe address space and not in GUTs Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCWChunhe Lan2015-01-16-3/+3
| | | | | | | | | SerDes 2 protocol 56 is not valid any longer due to the new RCW; protocol 55 is used instead, so add SerDes 2 protocol 55 to align with RCW. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: mpc85xx: Add dummy gpio.h to enable CONFIG_OF_CONTROLRuchika Gupta2015-01-16-0/+15
| | | | | | | | | | | | | | | | | | | | If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. It includes <asm/gpio.h> and then <asm/gpio.h> includes <asm/arch/gpio.h>. As a result, all the SoCs that enable CONFIG_OF_CONTROL must have <asm/arch/gpio.h>. The right fix would be to split the lib/fdtdec.c to remove dependency on GPIO. This commit adds a dummy <asm/arch/gpio.h> to support OF_CONTROL for mpc85xx platform. A file mpc85xx_gpio.h exists in arch/powerpc/include/asm. The defintions in that file conflict with the ones in asm-generic/gpio.h. Hence a dummy header file has been added. This will be removed after FDT-GPIO stuff is fixed correctly. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DSgaurav rana2015-01-16-0/+5
| | | | | | | Secure boot target is added for P5040DS platform. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/c29xpcie: Add secure boot supportPo Liu2015-01-16-0/+12
| | | | | | | | Add NOR and SPI flash secure boot target for C29XPCIE board. Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Mingkai.Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-01-16-399/+579
|\
| * omap5: Add netargs and netboot optionCooper Jr., Franklin2015-01-13-1/+14
| | | | | | | | | | | | | | | | * Add netargs and netboot option. * This enables tftp and nfs booting * This puts omap5 devices inline with other devices such as am335x and am437x Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
| * arm: omap3: devkit8000: inherit from ti_omap3_common.hAnthoine Bourgeois2015-01-13-42/+16
| | | | | | | | Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
| * arm: omap3: devkit8000: inherit from ti_armv7_common.hAnthoine Bourgeois2015-01-13-98/+36
| |
| * pcm051: Add boot script support to pcm051matwey.kornilov@gmail.com2015-01-13-11/+18
| | | | | | | | | | | | This patch adds boot script support to pcm051 Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
| * board: ti: am43xx: add support for AM43xx Industrial Development KitFelipe Balbi2015-01-13-19/+118
| | | | | | | | | | | | | | | | | | | | | | | | AM43xx Industrial Development Kit is a new board based on AM437x line of SoCs. Targetted at Industrial Automation applications, it comes with EtherCAT, motor control and other goodies. Thanks to James Doublesin for all the help. Cc: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * pmic: add tps62362 simple wrapper codeFelipe Balbi2015-01-13-0/+77
| | | | | | | | | | | | | | | | This regulator is used with AM437x IDK to feed VDD_MPU, without means to scale VDD_MPU we can't support higher frequencies. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * board: ti: am43xx: take care of all OPPsFelipe Balbi2015-01-13-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that all OPPs are checked on scale_vcores(). While at that also fix 600MHz VDD_MPU voltage according to AM437x Data Manual available at [1]. Table 5-3 on that document, lists all valid voltages per frequency. [1] http://www.ti.com/lit/ds/symlink/am4379.pdf Signed-off-by: Felipe Balbi <balbi@ti.com>
| * power: tps65218: define all valid VDD_MPU voltagesFelipe Balbi2015-01-13-0/+3
| | | | | | | | | | | | | | | | DCDC1 is used as VDD_MPU in all known boards, let's define all other valid voltages for that rail so it can be used by our boards. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * board: ti: am43xx: replace if else if else with a switchFelipe Balbi2015-01-13-3/+6
| | | | | | | | | | | | | | | | A switch statement fits better in this case, specially considering we have a few extra frequencies to use. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * arm: am437x: Correct PLL frequency for 25MHzJames Doublesin2015-01-13-1/+1
| | | | | | | | | | | | | | | | The frequencies for 25MHz in dpll_per were out of spec for 25MHz, correct. Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * arm: am437x: Enable hardware leveling for EMIFJames Doublesin2015-01-13-207/+138
| | | | | | | | | | | | | | | | | | | | | | | | Switch to using hardware leveling for certain parameters on the EMIF rather than using precalculated values. Doing this also means we have a common place now between am437x and am335x for setting emif_sdram_ref_ctrl with a value for the correct delay length. Tested-by: Felipe Balbi <balbi@ti.com> Tested-by: Tom Rini <trini@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * arm: am437x: PLL values for all input frequenciesJames Doublesin2015-01-13-26/+33
| | | | | | | | | | | | | | | | | | | | Need to provide PLL values for all possible input frequencies (19.2, 24, 25, 26MHz). Values provide are also optimized for jitter (needed especially for PER PLL and DDR PLL). Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
| * mtd: OMAP: Enable GPMC prefetch modeDaniel Mack2015-01-13-3/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable GPMC's prefetch feature for NAND access. This speeds up NAND read access a lot by pre-fetching contents in the background and reading them through the FIFO address. The current implementation has two limitations: a) it only works in 8-bit mode b) it only supports read access Both is easily fixable by someone who has hardware to implement it. Note that U-Boot code uses non word-aligned buffers to read data into, and request read lengths that are not multiples of 4, so both partial buffers (head and tail) have to be addressed. Tested on AM335x hardware. Tested-by: Guido Martínez <guido@vanguardiasur.com.ar> Reviewed-by: Guido Martínez <guido@vanguardiasur.com.ar> Signed-off-by: Daniel Mack <zonque@gmail.com> [trini: Make apply again, use 'cs' fix pointed out by Guido] Signed-off-by: Tom Rini <trini@ti.com>
* | powerpc: 74xx_7xx: remove 74xx_7xx cpu supportMasahiro Yamada2015-01-16-18881/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | All the 74xx_7xx boards are still non-generic boards: P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2 Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: York Sun <yorksun@freescale.com> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Nye Liu <nyet@zumanetworks.com> Cc: Roy Zang <tie-fei.zang@freescale.com>
* | mpc8xx: remove unused linker scriptMasahiro Yamada2015-01-16-82/+0
| | | | | | | | | | | | | | | | | | | | Now TQM8xx is the only remaining board family of mpc8xx. It uses its own linker script, board/tqc/tqm8xx/u-boot.lds. arch/powerpc/cpu/mpc8xx/u-boot.lds is not used by any boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
* | ppc4xx: remove dead codeMasahiro Yamada2015-01-16-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | Since commit 843125daebd7 (ppc4xx: remove HH405 board), CONFIG_HH405 is not defined. Since commit d52633047913 (ppc4xx: remove PMC405), CONFIG_PMC405 is not defined. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
* | Merge branch 'buildman' of git://git.denx.de/u-boot-x86Tom Rini2015-01-15-78/+606
|\ \
| * | buildman: Add an option to write the full build outputSimon Glass2015-01-14-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | Normally buildman runs with 'make -s' meaning that only errors and warnings appear in the log file. Add a -V option to run make in verbose mode, and with V=1, causing a full build log to be created. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Add the option to download toolchains from kernel.orgSimon Glass2015-01-14-13/+303
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient repository of toolchains which can be used for U-Boot. Add a feature to download and install a toolchain for a selected architecture automatically. It isn't clear how long this site will stay in the current place and format, but we should be able to rely on bug reports if it changes. Suggested-by: Marek Vašut <marex@denx.de> Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Allow architecture to alias to multiple toolchainsSimon Glass2015-01-14-5/+23
| | | | | | | | | | | | | | | | | | | | | Some archs have need than one alias, so support a list of alises in the ..buildman file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Don't use the local settings when running testsSimon Glass2015-01-14-1/+14
| | | | | | | | | | | | | | | | | | | | | We should create a test setting file when running testes, not use whatever happens to be on the local machine. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Don't complain about missing sections in ~/.buildmanSimon Glass2015-01-14-1/+0
| | | | | | | | | | | | | | | | | | Silently ignore this since it is valid to have missing sections. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Add documentation about the .buildman fileSimon Glass2015-01-14-20/+53
| | | | | | | | | | | | | | | | | | | | | This file is only partially documented. Add some more details. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
| * | buildman: Add a note about Python pre-requisitesSimon Glass2015-01-14-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | Since we need a few modules which might not be available in a bare-bones distribution, add a note about that to the README. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
| * | buildman: Add an option to use the full tool chain pathSimon Glass2015-01-14-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases there may be multiple toolchains with the same name in the path. Provide an option to use the full path in the CROSS_COMPILE environment variable. Note: Wolfgang mentioned that this is dangerous since in some cases there may be other tools on the path that are needed. So this is set up as an option, not the default. I will need test confirmation (i.e. that this commit fixes a real problem) before merging it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Steve Rae <srae@broadcom.com>
| * | buildman: Put the toolchain path first instead of last in PATHSimon Glass2015-01-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If: 1. Toolchains A and B have the same filename 2. Toolchain A is in the PATH 3. Toolchain B is given in ~/.buildman and buildman uses it to build then buildman will add toolchain B to the end of its path but will not necessarily use it since U-Boot will find toolchain A first in the PATH. Try to fix this by putting the toolchain first in the path instead of last. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Try to avoid hard-coded string parsingSimon Glass2015-01-14-1/+8
| | | | | | | | | | | | | | | | | | | | | The assumption that the compiler name will always end in gcc is incorrect for clang and apparently on BSD. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Allow specifying a range of commits to buildSimon Glass2015-01-14-9/+45
| | | | | | | | | | | | | | | | | | | | | | | | Adjust the -b flag to permit a range expression as well as a branch. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | buildman: Don't remove entire output directory when testingSimon Glass2015-01-14-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | When running tests the output directory is often wiped. This is only safe if a branch is being built. The output directory may contain other things besides the buildman test output. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Add an option to flatten output directory treesSimon Glass2015-01-14-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building current source for a single board, buildman puts the output in <output_dir>/current/current/<board>. Add an option to make it use <output_dir>/<board> instead. This removes the unnecessary directories in that case, controlled by the --no-subdirs/-N option. Suggested-by: Tom Rini <trini@ti.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Try to guess the upstream commitSimon Glass2015-01-14-16/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buildman normally obtains the upstream commit by asking git. Provided that the branch was created with 'git checkout -b <branch> <some_upstream>' then this normally works. When there is no upstream, we can try to guess one, by looking up through the commits until we find a branch. Add a function to try this and print a warning if buildman ends up relying on it. Also update the documentation to match. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
| * | buildman: Don't prune output space for 'current source' buildSimon Glass2015-01-14-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is not needed since we always do a full (non-incremental) build. Also it might be dangerous since it will try to delete everything below the base directory. Fix this potentially nasty bug. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Put build in 'current', not 'current/current'Simon Glass2015-01-14-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | Buildman currently puts current-source builds in a current/current subdirectory, but there is no need for the extra depth. Suggested-by: Albert Aribaud <albert.u.boot@aribaud.net> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Add tests that check the correct output directory is usedSimon Glass2015-01-14-0/+31
| | | | | | | | | | | | | | | | | | Add a few tests of the output directory logic. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Merge branch 'next' of git://git.denx.de/u-boot-videoTom Rini2015-01-14-354/+347
|\ \ \
generated by cgit v1.1 at 2024-12-26 05:35:28 +0000