summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* MLK-10774-21 imx:imx6sxsabreauto add bspPeng Fan2015-04-29-0/+1591
| | | | | | | Add bsp and configuration file Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-20 imx:mx6 add plugin supportPeng Fan2015-04-29-10/+2693
| | | | | | Add plugin support Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-19 imx:mx6qsabreauto update bspPeng Fan2015-04-29-112/+571
| | | | | | Update bsp and add configuration file Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-18 imx:mx6qarm2 update bspPeng Fan2015-04-29-11/+318
| | | | | | Update bsp and add configuration file Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-17 imx:mx6sabresd update bspPeng Fan2015-04-29-483/+934
| | | | | | Update bsp and add configuration file Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-16 imx:mx6sxsabresd update board and configPeng Fan2015-04-29-126/+697
| | | | | | | | | Update mx6sxsabresd board and config file Note: Fastboot Android support is not added. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-15 imx:mx6slevk update board codePeng Fan2015-04-29-14/+184
| | | | | | | | | | | Update board header and bsp code in board/freescale/mx6slevk Update board config file Note: Fastboot will be added in future Android config is not included. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-14 imx:mx6sx fix pad settingsPeng Fan2015-04-29-1/+5
| | | | | | Fix PAD_CTL_SPEED_LOW pad settings. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-13 imx:mx6 update header files in arch-mx6Peng Fan2015-04-29-25/+749
| | | | | | Update header files in arch/arm/include/asm/arch-mx6/ Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-59 iMX6SX: Add RDC mappings of masters and peripheralsYe.Li2015-04-29-0/+159
| | | | | | | | | Add the definitions for the RDC mappings on iMX6SX and include this file to "imx-rdc.h" Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit f4d42906c0db4d156e197781784d0ae010a364a5) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-12 imx:mx6 update habPeng Fan2015-04-29-9/+16
| | | | | | Update hab with imx_v2014.04 Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-11 mx6: clock: Modify GPMI clock to support mx6sxPeng Fan2015-04-29-0/+13
| | | | | | | | On mx6sx, the CCM register bits for GPMI are different as other mx6 platforms. Modify the GPMI clock function to support mx6sx. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-10 imx:mx6sx add mx6sx support for pcie power downPeng Fan2015-04-29-0/+6
| | | | | | Add mx6sx support for pcie power down Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00325255 pcie:enable pcie support on imx6sx sdRichard Zhu2015-04-29-6/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable pcie support in uboot on imx6sx sd boards - enable_pcie_clock should be call before ssp_en is set, since that ssp_en control the phy_ref clk gate, turn on it after the source of the pcie clks are stable. - add debug info - add rx_eq of gpr12 on imx6sx - there are random link down issue on imx6sx. It's pcie ep reset issue. solution:reset ep, then retry link can fix it. Signed-off-by: Richard Zhu <r65037@freescale.com> (cherry picked from commit ec78595a24b5ff1020baa97b6d6e79a3a3326307) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/cpu/armv7/mx6/clock.c arch/arm/include/asm/arch-mx6/iomux.h drivers/pci/pcie_imx.c include/configs/mx6sxsabresd.h Note: There is an upstream patch 1b8ad74a6f8cea55a727dc4b399baac46d0daef1 to add support for mx6solox. This patch is to add more stuff from our vendor imx_v2014.04 branch.
* ENGR00319151-2 HAB: Add the HAB image authentication to bootzYe.Li2015-04-29-0/+9
| | | | | | | | | Since the zImage is used at default, add the HAB image authentication support in bootz to authenticate zImage. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 591100eec569dd1d54f61e9f49fe995f56a021eb) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-9 common: add sata commandPeng Fan2015-04-29-4/+177
| | | | | | Add sata command Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-8 env_mmc: add the dynamtic mmc dev supportPeng Fan2015-04-29-8/+14
| | | | | | | | | This patch add the support to load/save env to the slot which was used as the boot media by dynamic detection. Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-7 Auto check if boot from usbPeng Fan2015-04-29-0/+52
| | | | | | | | | | | If boot from usb, reset environment to default value. Auto apply mfgtools setting and boot mfgtools kernel. Signed-off-by: Frank Li <Frank.li@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10035-2: supports NAND chips with oob size up to 744 byteAllen Xu2015-04-29-9/+17
| | | | | | | | | | | | | | | | | | Update the u-boot code to support NAND chips with oob size up to 744 byte. For the NAND flash MT29F32G08CBADA, which consists of 2 planes x 1064 blocks per plane. Obviously the block number is not power-of-2. But all MTD driver assumes the page per block and block per plane must be a power of 2 number. So the last 40 blocks in each plane must be truncated. Signed-off-by: Allen Xu <b45815@freescale.com> (cherry picked from commit 9045626dbc7798cc340f64699bc9bd35c537498a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: include/linux/mtd/nand.h
* ENGR00325088 video: mxsfb: Disable LCDIF correctlyLiu Ying2015-04-29-5/+9
| | | | | | | | | | | | | | | | | | | | | Let's use the i.MX common miscellaneous reset API to reset the LCDIF block so that we may eliminate a random hang issue at the arch_preboot_os() stage when we disable the LCDIF. This patch also waits for a VSYNC interrupt to guarantee the reset is done at the VSYNC edge, which somehow makes the LCDIF consume the display FIFO(?) and helps the LCDIF work normally at the kernel stage. Tested-by: Jason Liu <r64343@freescale.com> Tested-by: Sandor Yu <R01008@freescale.com> Tested-by: Ye.Li <B37916@freescale.com> Tested-by: Guo Sally <b38912@freescale.com> Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 45fa2ad38b846596e61ce8fc477713dede8a43e7) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 9d782aa487c4ffe096c94bbda5867b44afd6a440) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-60 GPIO: Modify driver mxc_gpio to support RDC SemaphoresYe.Li2015-04-29-0/+51
| | | | | | | | | | | | | | | | | | | | For GPIO group which shared by multiple masters, it may set in RDC to shared and semaphore required. Before access the GPIO register, the GPIO driver must get the RDC semaphore, and release the semaphore after the GPIO register access. When CONFIG_MXC_RDC is set, the features related to RDC semaphores is enabled in mxc_gpio driver. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 84d63e2e2ce12f714e88baad8b2325684614a7c1) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: drivers/gpio/mxc_gpio.c (cherry picked from commit c9943b9c8a78bb2c9886bfe582e82978387d8dee) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-33 gpmi: use the same ECC strength as used in the kernelYe.Li2015-04-29-19/+13
| | | | | | | | | | | | | | | | | Current code use the hardcoded ECC strength which is not aligned with the kernel. This patch use the same ECC strength as used in the kernel. We do not support the NAND whose OOB size is larger then 512bytes. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 8b3db31d607be02409b1f4937d91241f48229e96) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: drivers/mtd/nand/mxs_nand.c
* ENGR00315499-22 video: ipu: wait for DP SF end irq when disabling sync BG flowLiu Ying2015-04-29-3/+3
| | | | | | | | | | | | | | | Instead of waiting for DC triple buffer to be cleared, this patch changes to wait for a relevant DP sync flow end irq when disabling sync BG flows. In this way, we align the implement to the FSL internal IPUv3 driver. After applying this patch, the uboot hang up issue at the arch_preboot_os stage on the MX6DL platforms is not observed any more. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit 56d72035946c40f45d2f49ccb1520734e34ecc89) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit d8ac526681589c62287d014fedee4c9e64fbca66) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-6 imx: add mxc_keybPeng Fan2015-04-29-0/+834
| | | | | | | | | | | | This patch is from commit b79371410aa44972dea53d5c19d256170928dcbd "ENGR00315499-9: ARM:iMX6SL EVK: Add keyboard support" Since board file already added related bsp and pin settings, this patch only add driver. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315499-18 driver:MAX7310: Add GPIO expander driver for MAX7310Ye.Li2015-04-29-0/+241
| | | | | | | | | | | | | | | | | Implement simple functionalities for MAX7310 GPIO input and output. Because MAX7310 is a off-chip device and need to co-exist with on-chip GPIO, new APIs are added specifically for expander device. CONFIG_MAX7310_IOEXP is used to enable the MAX7310 driver. The I2C related configurations also need to set together. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit e3b699dab2c92268799b56c28c6a8fcda4f6110b) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: drivers/gpio/Makefile
* MLK-10774-5 Add EPDC splash screen for MX 6DL SabreSD and 6SL EVKPeng Fan2015-04-29-1/+1721
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board. - Currently, splash screen consists of a simple black border around a white screen. Done this way to save in memory footprint. - EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly (hang), since some additional content on the boot device (waveform file) is required for EPDC splash to work correctly. Please refer to Linux Reference Manual for how to flash WAVEFORM file. Signed-off-by: Robby Cai <R63905@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> (cherry picked from commit b8ab9b3eabb94bbbc1eea63e7c0e2a87d2d645f4) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/mx6sl_pins.h board/freescale/mx6sabresd/mx6sabresd.c board/freescale/mx6slevk/mx6slevk.c drivers/video/Makefile include/configs/mx6sabresd.h include/configs/mx6slevk.h include/lcd.h drivers/video/Makefile
* MLK-10774-4 fsl:qspi update qspi driverPeng Fan2015-04-29-596/+684
| | | | | | Use freescale vendor qspi driver but not upstream qspi driver Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00328312 i2c: imx: Optimize the i2c device recovery solutionFugang Duan2015-04-29-2/+25
| | | | | | | | | | | | | | | | | From i2c spec, if device pull down the SDA line that causes i2c bus dead, host can send out 9 clock to let device release SDA. But for some special device like pfuze100, it pull down SDA line and the solution cannot take effort. The patch just add NACK and STOP signal after 8 dummy clock, and pmic can release SDA line after the recovery. Test case catch 375 times of i2c hang, and all are recovered. Signed-off-by: Fugang Duan <B38611@freescale.com> (cherry picked from commit 53118db42d201d36ca9067b4bb0e2702399e100b) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321435-1 imx-common: cpu: Disable mxsfb when necessaryLiu Ying2015-04-29-0/+4
| | | | | | | | | | The kernel may break the display pipeline at boot stage and introduce various display artifacts, so let's disable mxsfb in uboot when necessary. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> (cherry picked from commit 539b8416299ec1ae3f57f866dd3f016bdfaa6875) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-81 gis: Add gis moduleYe.Li2015-04-29-0/+640
| | | | | | | | | | | | Add gis module, current gis is support vadc input. Add power down function to lcdif driver. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793) Conflicts: drivers/video/Makefile
* ENGR00315894-80 pxp: Add pxp moduleYe.Li2015-04-29-0/+324
| | | | | | | | | | Add pxp module. Support csc between YUV444 and RGB888 and scaling. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 4c6e1f9ed1b2f5c98a34502b44b6414593fdd290) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-79 csi: Add csi moduleYe.Li2015-04-29-0/+425
| | | | | | | | | Add csi module. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 854ae26758ec8132ef749b98645dd2f43b84e5e2) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-78 vadc: Add vadc moduleYe.Li2015-04-29-0/+602
| | | | | | | | | | Add vadc module. Both PAL and NTSC mode can work. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 03c31ae30c1e81c99f6824221e4801433445e04a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-70 iMX6SX:Video Update MXS LCDIF driverYe.Li2015-04-29-13/+67
| | | | | | | | | | | | | | Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and specifies the LCDIF controller for multiple controllers of iMX6SX. Pass fb parameters via "videomode" env remains work if the new interface is not called before video initialization. Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple LCDIF controllers on iMX6SX. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 054fed6bab5b05a054c7e3cb5362635a40e6ee18) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-58 RDC: Add an iMX platform driver for RDC-SEMAYe.Li2015-04-29-0/+319
| | | | | | | | | | | | | | | | | | | | The RDC driver provides interfaces for setting peripherals and masters at BSP initialization, before using the peripherals driver. Another interfaces for lock/unlock RDC semaphore and permission check. The driver assumes boot CPU which runs u-boot is in Domain 0 (default setting on boot). Users should not set it to other domains. The peripherals ID and masters ID may change on different chip, each should provide definitions of the IDs and be included in "imx-rdc.h". Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 964b2672bfbec14629f5767e59e73fd3bb185e3a) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/imx-common/Makefile arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-55 iMX6SX: add debug monitor supportYe.Li2015-04-29-0/+25
| | | | | | | | | | | | | | | | Debug monitor will print out last failed AXI access info when system reboot is caused by AXI access failure, only works when debug monitor is enabled. Enable this module on i.MX6SX. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit df6ac8531d498021ed379c74fc1847bd2cec7179) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00331269 arm: mx6: select OSC as uart's clk parentAnson Huang2015-04-29-0/+9
| | | | | | | | | | As M4 is sourcing UART clk from OSC, to make UART work when M4 is enabled, need to select OSC as clk parent, 24M OSC is enough for debug UART in uboot. Signed-off-by: Anson Huang <b20788@freescale.com> (cherry picked from commit 8b903f529370fdc59cc03b3ced954ed894753044) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00322860 iMX6SX: Add function to check M4 status before bootingYe.Li2015-04-29-1/+31
| | | | | | | | | Add new function "arch_auxiliary_core_check_up" to check whether M4 is already up. Therefore, avoid starting M4 again when it is running. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 54a0803b29c5ab459bedfb2c68c1e94b89866aa1) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-56 CMD: Add new command "bootaux" to boot auxiliary coreYe.Li2015-04-29-0/+43
| | | | | | | | | | | | | To boot a auxiliary core in asymmetric multicore system, introduce the new command "bootaux" to do it. Example of boot auxliary core from 0x70000000 where stores the boot head information that should be parsed by each core. "bootaux 0x70000000" Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit fd00c322d058e02953a336517547174edaf2c573) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321299 gis: clean csi0 input mux set bit in GPRSandor Yu2015-04-29-0/+6
| | | | | | | | | | When gis enable in uboot, the CSI0 input mux select setting to vadc module, clean the bit when gis disabled. Signed-off-by: Sandor Yu <R01008@freescale.com> (cherry picked from commit ae66b17b7da3be50dc81ca636b67e8e879f52e26) (cherry picked from commit c83fd326e810c2fff44b8b02e78406d5d04c977c) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00321260-1 iMX6: Add support to get CPU serial numberYe.Li2015-04-29-0/+13
| | | | | | | | | | The android boot needs get_board_serial function to get the CPU uid as the serial number. Implement this function to read the uid from fuse for all iMX6 platforms. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 8d355a9d6f138e1c1cd04dbadb7b5b3e2d692701) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00320350 iMX6SLEVK: Fix build warning of PCIE Phy power downYe.Li2015-04-29-0/+2
| | | | | | | | | | | | | | Since the iMX6SL does not have PCIE module, should not define the function "imx_set_pcie_phy_power_down" for it. Otherwise, get the build warning below: arch/arm/cpu/armv7/mx6/soc.c:446:13: warning: 'imx_set_pcie_phy_power_down' defined but not used [-Wunused-function] static void imx_set_pcie_phy_power_down(void) Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 987c48c07c9ef62fa3fe55faa6f7369b30637127) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00319965 pcie: mask the imx6sl outRichard Zhu2015-04-29-2/+7
| | | | | | | | | imx6sl doesn't have the pcie module, mask the pcie related codes from imx6sl. Signed-off-by: Richard Zhu <r65037@freescale.com> (cherry picked from commit acaff11da33f8f0cb1521d3c48e64e7ed9a87bec) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00319415 pcie: random link down issue after warm-rstRichard Zhu2015-04-29-0/+18
| | | | | | | | | | | | | | | | | | | There are about 0.02% percentage on some imx6q/dl/solo hw boards, random pcie link down when warm-reset is used. Make sure to clear the ref_ssp_en bit16 of gpr1 before warm-rst, and set ref_ssp_en after the pcie clks are stable to workaround it. rootcause: * gpr regisers wouldn't be reset by warm-rst, while the ref_ssp_en is required to be reset by pcie. (work-around in u-boot) * ref_ssp_en should be set after pcie clks are stable. (work-around in kernel) Signed-off-by: Richard Zhu <r65037@freescale.com> (cherry picked from commit 5cc825b12c6b86a22f1a6a0535b52cf3ee142e77) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-77 mx6 soc: Add vadc power up/down functionYe.Li2015-04-29-0/+59
| | | | | | | | | | | | Add vadc power up/down function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 96d990ef754a879f6ca9da4adf6e0be3d21cdc51) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-76 mx6 clock: Add vadc clock enable functionYe.Li2015-04-29-0/+11
| | | | | | | | | | | | | Add vadc clock enable function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 721c7a1448c5b7265b597b83d18f8338a27ea213) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/cpu/armv7/mx6/clock.c arch/arm/include/asm/arch-mx6/clock.h
* ENGR00315894-71 iMX6SX Update registers and clock for displayYe.Li2015-04-29-0/+445
| | | | | | | | | | | | | Add registers and clock functions to enable/set LCDIF clock and LVDS. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit ef9d769f9ad1b504a1df8b987d269df9944d8e0c) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/include/asm/arch-mx6/clock.h arch/arm/include/asm/arch-mx6/crm_regs.h arch/arm/include/asm/arch-mx6/imx-regs.h
* ENGR00315894-57 iMX6SX: Add M4 boot support at soc levelYe.Li2015-04-29-0/+29
| | | | | | | | | | | Implement the override function "arch_auxiliary_core_up" to boot Cortex-M4 by executing command "bootaux". The parameter "boot_private_data" points to fields where stores the stack address and PC address for M4 to run. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 98c15deb3083d5dac7900c58e95f2ac2f422a4d3) Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-10774-3 iMX6SX/SL: Modify SOC to support two ENETPeng Fan2015-04-29-6/+48
| | | | | | | | | | | | | | | | | | | iMX6SX has different enet system clocks with iMX6SL, and has two ENET controllers. So update clocks and soc APIs accordingly to support this features. 1. Enet RGMII TX clock source may come from external or internal PLL. By default, use the external phy CLK_25M output as TX clock source. When using internal PLL as source, the function enable_fec_anatop_clock must be called to enable clock for each enet controller. 2. Modify the MAC address function "imx_get_mac_from_fuse" to get either ENET MAC address. 3. Add configuration "CONFIG_FEC_MXC_25M_REF_CLK" to enable ENET 25Mhz reference clock. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00315894-11 i.mx6:shutdown vddpu and pcie phy to save powerYe.Li2015-04-29-0/+31
| | | | | | | | | | | | | shutdown vddpu and pcie phy to save power Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 580011f86caf137d59a487694f6f7da042164e05) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Conflicts: arch/arm/cpu/armv7/mx6/soc.c
generated by cgit v1.1 at 2024-11-09 14:18:07 +0000