summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sunxi: display: Make lcd display clk phase configurableHans de Goede2015-01-22-9/+12
| | | | | | | | | | | | | | | | | | | | While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module I noticed that the screen flickered. This is caused by the lcd display clk phase reg value being set to 0, where it should be 1 in this setup. This commit adds a Kconfig option for the lcd display clk phase, so that we can set it per board. This defaults to 1, because looking at all the fex files in sunxi-boards, that is by far the most used value. This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the default of 1 with 0, as that is the correct value for those tablets, this keeps the register settings the same as before this commit. The Olinuxino-A13 defconfigs are not updated, changing the register setting for these boards from 0 to 1, this is intentional. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Restore lowlevel_init usageHans de Goede2015-01-21-22/+21
| | | | | | | | | | | | | | | | | | 2 recent sunxi changes have removed the usage of lowlevel_init by moving some code around and then setting CONFIG_SKIP_LOWLEVEL_INIT. This is problematic for 2 reasons: 1) It does not just stop s_init from being called, it also stops cpu_init_cp15 from getting called, which is undesirable. 2) We want u-boot.bin to be usable standalone, without SPL, some people e.g. use an upstream u-boot.bin together with Allwinner's boot0 loader. So u-boot.bin must (re)initialize the gpios, timer, etc. This commit restores the lowlevel_init / s_init usage, while keeping the changes to no longer use the global-data (gd) struct in the SPL. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* Merge git://git.denx.de/u-boot-arcTom Rini2015-01-20-71/+123
|\
| * arc: rename "arc700" in "arcv1"Alexey Brodkin2015-01-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | As a preparation to ARCv2 port submission we rename "arc700" folder to "arcv1" which stands for ARCv1 ISA also known as ARCompact. This will allow us to add more flavours of binary-compatible ARCv1 CPUs like ARC600 if needed later on and all required ARCv2 CPUs (which are binary incompatible with ARCv1) in "arcv2" folder in subsequent commits. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
| * board/synopsys: remove selection of CPU from the boardAlexey Brodkin2015-01-15-9/+3
| | | | | | | | | | | | | | | | Both ARCangel4 and AXS10x are FPGA-based boards so they may have different CPUs. For now we have only 1 option (ARC700) and we define this as default in arch Kconfig. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: move common sources in libraryAlexey Brodkin2015-01-15-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "reset.c" and "cpu.c" have no architecture-specific code at all. Others are applicable to either ARC CPU. This change is a preparation to submission of ARCv2 architecture port. Even though ARCv1 and ARCv2 ISAs are not binary compatible most of built-in modules still have the same programming model - AUX registers are mapped in the same addresses and hold the same data (new featues extend existing ones). So only low-level assembly code (start-up, interrupt handlers) is left as CPU(actually ISA)-specific. This significantyl simplifies maintenance of multiple CPUs/ISAs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
| * arc: move linker script in arch/arc/cpu folderAlexey Brodkin2015-01-15-0/+0
| | | | | | | | | | | | This way we'll be able to use the same one script for either ARC CPU. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: relocate - minor refactoring and clean-upAlexey Brodkin2015-01-15-11/+5
| | | | | | | | | | | | | | | | | | | | * use better symbols for relocatable region boundaries ("__image_copy_start" instead of "CONFIG_SYS_TEXT_BASE") * remove useless debug messages because they will only show up in case of both problem (when normal "if" branch won't be taken) and DEBUG take place which is pretty rare situation. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: introduce separate section for interrupt vector tableIgor Guryanov2015-01-15-31/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even though existing implementation works fine in preparation to submission of ARCv2 architecture we need this change. In case of ARCv2 interrupt vector table consists of just addresses of corresponding handlers. And if those addresses will be in .text section then assembler will encode them as everything in .text section as middle-endian and then on real execution CPU will read swapped addresses and will jump into the wild. Once introduced new section is situated so .text section remains the first which allows us to use common linker option for linking everything to a specified CONFIG_SYS_TEXT_BASE. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
| * arc: add dependences on MMU presenceAlexey Brodkin2015-01-15-4/+18
| | | | | | | | | | | | | | | | | | Depending on MMU presence in CPU there're differences in HW behavior. For example address of instruction that caused exception is put in ECR register if MMU exists and in ERET register otherwise. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
| * arc: interrupts - fix mask setupIgor Guryanov2015-01-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | To disable interrupts we need to reset corresponding flags in STATUS32 register. For this we need to OR flags for interrupts level1 and level2 and then AND with current value in STATUS32. Before that implementation was incorrect. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
| * arc: add ECR (exception cause register) outputIgor Guryanov2015-01-15-4/+7
| | | | | | | | | | | | | | | | | | | | | | Exception cause register (ECR) contains value that describes a reason for exception that has happened. This helps a lot to figure-out what went wrong. Now we print this register contents when dumping registers. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
| * arc: check caches existence before useIgor Guryanov2015-01-15-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some cache operations ({i|d}cache_{enable|disable|status} or flush_dcache_all) are built and used even if CONFIG_SYS_{I|D}CACHE_OFF is set. This is required for force disable of caches on early boot. What if something was executed before U-boot and enabled caches (low-level bootloaders, previously run kernel etc.)? But if CPU doesn't really have caches any attempt to access cache-related AUX registers triggers instruction error exception. So for convenience we'll try to avoid exceptions by checking if CPU actually has caches (we check separately data and instruction cache existence) at all. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2015-01-20-27/+1427
|\ \
| * | mmc: Skip changing bus width for MMC cards earlier than version 4.0Andrew Gabbasov2015-01-19-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wider bus widths (larger than default 1 bit) appeared in MMC standard version 4.0. So, for MMC cards of any earlier version trying to change the bus width (including ext_csd comparison) does not make any sense. It may work incorrectly and at least cause unnecessary timeouts. So, just skip the entire bus width related activity for earlier versions. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com>
| * | mmc: Avoid redundant switching to 1-bit bus width for MMC cardsAndrew Gabbasov2015-01-19-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If all the commands switching an MMC card to 4- or 8-bit bus width fail, and the bus width for the controller and the driver is still set to default 1 bit, there is no need to send one more command to switch the card to 1-bit bus width. Also, if the card or host controller do not support wider bus widths, there is no need to send a switch command at all. However, if one of switch commands succeeds, but the subsequent ext_csd fields comparison fails, the card should be switched to some other bus width (next in the list for the loop), or to default 1-bit bus width as a last resort. That's why it would be incorrect to just remove the 1-bit bus width case from the list, it should still be processed in some cases. panto: Minor cosmetic edit removing superfluous parentheses. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
| * | mmc: extend mmcinfo output to show partition write reliability settingsDiego Santa Cruz2015-01-19-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This extends the mmcinfo hardware partition info output to show partitions with write reliability enabled with the "WRREL" string. If the partition does not have write reliability enabled the "WRREL" string is omitted; this is analogous to the ehhanced attribute. Example output: Device: OMAP SD/MMC Manufacturer ID: fe OEM: 14e Name: MMC16 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.41 High Capacity: Yes Capacity: 13.8 GiB Bus Width: 4-bit Erase Group Size: 8 MiB HC WP Group Size: 16 MiB User Capacity: 13.8 GiB ENH WRREL User Enhanced Start: 0 Bytes User Enhanced Size: 512 MiB Boot Capacity: 16 MiB ENH RPMB Capacity: 128 KiB ENH GP1 Capacity: 64 MiB ENH WRREL GP2 Capacity: 64 MiB ENH WRREL Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: extend the mmc hwpartition sub-command to change write reliabilityDiego Santa Cruz2015-01-19-24/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change extends the mmc hwpartition sub-command to change the per-partition write reliability settings. It also changes the syntax used for the enhanced user data area slightly to better accomodate the write reliability option. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: extend the mmc hardware partitioning API with write reliabilityDiego Santa Cruz2015-01-19-1/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC partition write reliability settings are to be set while partitioning a device, as per the eMMC spec, so changes to these attributes needs to be done in the hardware partitioning API. This commit adds such support. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: add mmc hwpartition sub-command to do eMMC hardware partitioningDiego Santa Cruz2015-01-19-1/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | Adds the mmc hwpartition sub-command to perform eMMC hardware partitioning on an mmc device. The number of arguments can be large for a complex partitioning, but as the partitioning has to be done in one go it is difficult to make it simpler. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: add API to do eMMC hardware partitioningDiego Santa Cruz2015-01-19-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds an API to do hardware partitioning on eMMC devices. The new mmc_hwpart_config() function does the partitioning in one go. As the different attributes and partitioning options on eMMC may be interdependent validation has to be done based on the complete partitioning configuration. The function accepts three modes: - MMC_HWPART_CONF_CHECK: just validates that the configuration is valid. - MMC_HWPART_CONF_SET: validates and sets all the fields in EXT_CSD but without setting the "partitioning completed" bit, and thus is reversible. - MMC_HWPART_CONF_COMPLETE: does everything and is thus not reversible. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: the ext_csd data may be used during init even if reading failedDiego Santa Cruz2015-01-19-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mmc_startup() function uses the ext_csd data even if reading it from the mmc device failed. This bug was introduced in commit bc897b1d4d86597311430dbe7b3e6c807c8c53e5. We now bail out if reading it fails, this should not be a problem as ext_csd was introduced in MMC 4.0 and this code is conditional on MMC >= 4.0. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: eMMC partitioning data is not effective till partitioning completedDiego Santa Cruz2015-01-19-23/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC spec says that partitioning is only effective after the PARTITION_SETTING_COMPLETED is set in EXT_CSD (and a power cycle was done, but that we cannot know). Thus the partition sizes and attributes should be ignored when that bit is not set, otherwise the various capacities are not coherent (e.g., the user data capacity will be that of the unpartitioned device while partition sizes would be non-zero). Prescence of non-zero partitioning data is nevertheless still used to activate the high-capacity size definitions (EXT_CSD_ERASE_GROUP_DEF) as it is necessary to set that to write any of the partitioning fields in EXT_CSD, so having partitioning data means someone previously activated that and we should keep it activated. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: show the erase group size and HC WP group size in mmcinfo outputDiego Santa Cruz2015-01-19-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the erase group size and high-capacity WP group size to mmcinfo's output. The erase group size is necessary to properly align erase requests on eMMC. The high-capacity WP group size is necessary to properly align partitions on eMMC. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: read the high capacity WP group size for eMMCDiego Santa Cruz2015-01-19-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Read the eMMC high capacity write protect group size at mmc device initialization. This is useful to correctly partition an eMMC device, as partitions need to be aligned to this size. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: fix erase_grp_size computation with high-capacity size definitionDiego Santa Cruz2015-01-19-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The erase_grp_size in struct mmc is to be a size in 512-byte sectors but the code used to compute it for eMMC when EXT_CSD_ERASE_GROUP_DEF is enabled computed it as bytes, leading to erase sizes and alignment much larger than what is actually required by the mmc device. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: display size and start of eMMC enhanced user data area in mmcinfoDiego Santa Cruz2015-01-19-3/+8
| | | | | | | | | | | | | | | | | | | | | This adds output to show the eMMC enhanced user data area size and offset along with the partition sizes in mmcinfo's output. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: read the size of eMMC enhanced user data areaDiego Santa Cruz2015-01-19-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | This modification reads the size of the eMMC enhanced user data area upon initialization of an mmc device, it will be used later by mmcinfo. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: computation of eMMC GP partition size was missing 512 KiB factorDiego Santa Cruz2015-01-19-0/+1
| | | | | | | | | | | | Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: incomplete test to switch to high-capacity group size definitionsDiego Santa Cruz2015-01-19-22/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC spec mandates that the high-capacity group size definitions should be enabled when the device is partitioned (by setting ERASE_GROUP_DEF in EXT_CSD). The current test to determine when this is required misses a few cases. In particular a device may have been partitioned without setting the enhanced attribute on any partition or partitioning may be completed without creating any extra partitions. This change moves the code to set ERASE_GROUP_DEF to after reading all partition information. It is also enabled when PARTITIONING_SETTING_COMPLETED is set as it is necessary to enable ERASE_GROUP_DEF before setting that bit, so it means that the user previously switched to the high capacity definitions. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: skip mmcinfo partition info processing for eMMC < 4.41Diego Santa Cruz2015-01-19-1/+1
| | | | | | | | | | | | | | | | | | | | | eMMC partitions are defined as of eMMC 4.41, but mmcinfo process partition info for eMMC >= 4.0, change it to do it for >= 4.41 Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: make eMMC general purpose partition numbering match specDiego Santa Cruz2015-01-19-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The eMMC spec numbers general purpose partitions starting at 1, but the mmcinfo output follows the internal numbering which starts at 0. Make the mmcinfo command output number partitions as in the eMMC spec to avoid confusion. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: extend mmcinfo to show enhanced partition attributeDiego Santa Cruz2015-01-19-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This extends the mmcinfo command's output to show which eMMC partitions have the enhanced attribute set. Note that the eMMC spec says that if the enhanced attribute is supported then the boot and RPMB partitions are of the enhanced type. The output of mmcinfo becomes: Device: OMAP SD/MMC Manufacturer ID: fe OEM: 14e Name: MMC16 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.41 High Capacity: Yes Capacity: 13.8 GiB Bus Width: 4-bit User Capacity: 13.8 GiB ENH Boot Capacity: 16 MiB ENH RPMB Capacity: 128 KiB ENH GP1 Capacity: 64 MiB ENH GP2 Capacity: 64 MiB ENH Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
| * | mmc: show hardware partition sizes in mmcinfo outputDiego Santa Cruz2015-01-19-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is currently no command that will provide an overview of the hardware partitions present on an eMMC device, one has to switch to every partition via "mmc dev" and run mmcinfo for each to get the partition's capacity. This commit adds a few lines of output to mmcinfo with the sizes of the present partitions, like this: Device: OMAP SD/MMC Manufacturer ID: fe OEM: 14e Name: MMC16 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.41 High Capacity: Yes Capacity: 13.8 GiB Bus Width: 4-bit User Capacity: 13.8 GiB Boot Capacity: 16 MiB RPMB Capacity: 128 KiB GP1 Capacity: 64 MiB GP2 Capacity: 64 MiB panto: Minor edit removing superfluous parentheses. Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
| * | mmc: rmobile: Add SDHC support for Renesas rmobile ARM SoCNobuhiro Iwamatsu2015-01-19-0/+897
| | | | | | | | | | | | | | | | | | | | | | | | This adds Renesas rmobile ARM SoC's SD/MMC host support. This drivers tested with Gose board and Koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2015-01-20-95/+602
|\ \ \
| * | | usb: eth: asix88179: add ability to modify MAC addressRene Griessl2015-01-18-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables U-Boot to modify the MAC address of the AX88179. Tested on RECS5250 (similar to Arndale5250) Signed-off-by: Rene Griessl <rgriessl@cit-ec.uni-bielefeld.de>
| * | | musb-new: Add interrupt queue supportHans de Goede2015-01-18-1/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add interrupt queue support, so that a usb keyboard can be used without causing huge latencies. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | musb-new: Add urb and hep parameters to construct_urbHans de Goede2015-01-18-32/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make construct_urb take an urb and hep parameter, rather then having it always operate on the file global urb and hep structs. This is a preperation patch for adding interrupt queue support. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | musb-new: Properly remove a transfer from the schedule on timeoutHans de Goede2015-01-18-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a transfer / urb times-out, properly remove it from the schedule, rather then letting it sit on the ep head. This stops the musb code from getting confused and refusing to queue further transfers after a timeout. Tested by unplugging a usb-keyboard, replugging it and doing a usb-reset, before this commit the keyboard would not work after the usb-reset. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | musb-new: Fix reset sequence when in host modeHans de Goede2015-01-18-11/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes a number of issues with the reset sequence of musb-new in host mode: 1) Our usb device probe relies on a second device reset being done after the first descriptors read. Factor the musb reset code into a usb_reset_root_port function (and add this as an empty define for other controllers), and call this when a device has no parent. 2) Just like with normal usb controllers there needs to be a delay after reset, for normal usb controllers, this is handled in hub_port_reset, add a delay to usb_reset_root_port. 3) Sync the musb reset sequence with the upstream kernel, clear all bits of power except bits 4-7, and increase the time reset is asserted to 50 ms. With these fixes an usb keyboard I have now always enumerates properly, where as earlier it would only enumerare properly once every 5 tries. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | musb-new: Fix interrupt transfers not workingHans de Goede2015-01-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For bulk and ctrl transfers common/usb.c sets udev->status = USB_ST_NOT_PROC, but it does not do so for interrupt transfers. musb_uboot.c: submit_urb() however was waiting for USB_ST_NOT_PROC to become 0, and thus without anyone setting USB_ST_NOT_PROC would exit immediately for interrupt urbs, returning the urb status of EINPROGRESS as error. This commit fixes this, thereby also making usb_kbd.c work together with musb_new and CONFIG_SYS_USB_EVENT_POLL. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | musb-new: Use time based timeouts rather then cpu-cycles based timeoutsHans de Goede2015-01-18-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU cycle based timeouts are no good, because how long they use depends on CPU speed. Instead use time based timeouts, and wait one second for a device connection to show up (per the USB spec), and wait USB_TIMEOUT_MS for various urbs to complete. This fixes "usb start" taking for ever when no device is plugged into the otg port. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | musb-new: Add sunxi musb controller supportHans de Goede2015-01-18-2/+282
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is based on Jussi Kivilinna's work for the linux-sunxi-3.4 kernel to use the kernels musb driver instead of Allwinners own custom driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | musb-new: Add register defines for different reg layout on sunxiHans de Goede2015-01-18-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The sunxi SoCs also have a musb controller, but with a different register layout. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | usb: Do not log an error when no devices is plugged into a root-hub-less hcdHans de Goede2015-01-18-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit u-boot would print the following on boot with musb and no usb device plugged in: starting USB... USB0: Port not available. USB error: all controllers failed lowlevel init This commit changes this to: starting USB... USB0: Port not available. Which is the correct thing to do since the low-level init went fine. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | usb: Fix usb_kbd_deregister when console-muxing is usedHans de Goede2015-01-18-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iomuxing is used we must not only deregister the device with stdio.c, but also remove the reference to the device in the console_devices array used by console-muxing. Add a call to iomux_doenv to usb_kbd_deregister to update console_devices, which will drop the reference. This fixes the console filling with "Failed to enqueue URB to controller" messages after a "usb stop force", or when the USB keyboard is gone after a "usb reset". Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | usb: Add an interval parameter to create_int_queueHans de Goede2015-01-18-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently create_int_queue is only implemented by the ehci code, and that does not honor interrupt intervals, but other drivers which might also want to implement create_int_queue may honor intervals, so add an interval param. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | config_distro_bootcmd.h: Remove unnecessary magic to avoid repeated USB scansHans de Goede2015-01-18-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that "usb start" will only start usb if not already started, we can simply call "usb start" whenever we (may) need access to usb devices, and it will only actually scan the bus at the first call. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | USB: make "usb start" start usb only onceHans de Goede2015-01-18-17/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we've this magic in include/config_distro_bootcmd.h to avoid scanning the usb bus multiple times. And it does not work when also using an usb keyboard because then the preboot command has already scanned the bus, so we're still scanning it twice. This commit makes "usb start" only start usb if it is no already started, allowing us to remove all the magic for it from include/config_distro_bootcmd.h and just call it unconditionally. This also causes "usb start" and "usb reset" to actually do what their different names suggest, rather then both of them doing exactly the same. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.1 at 2024-11-27 01:58:54 +0000