summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sunxi: non-FEL SPL boot support for sun7iIan Campbell2014-05-25-0/+255
| | | | | | | | | | | Add support for booting from an MMC card. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
* sunxi: mmc supportIan Campbell2014-05-25-0/+702
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Mon, 2014-05-05 at 14:18 +0200, Stefan Roese wrote: > > + case 1: > > +#if CONFIG_MMC1_PG > Are you sure that this is correct and shouldn't be: > > +#ifdef CONFIG_MMC1_PG > > ? It's "correct" in so far as it works (the boards.cfg config stuff #defines things to 1), but I think you are right that it isn't the preferred style. But... > A quick scan through this patch series shows that this define > is not set at all. Perhaps its outdated? Or is it used to support > some other sunxi SoC? Not sure, perhaps it should be removed for > now. ...I had thought that it was to support some other board which wasn't being upstreamed right now, so eventually useful and harmless for now, but I've just checked and it isn't actually used by any of the boards in u-boot-sunxi.git. So rather than fix it to use #ifdef lets drop it. Rather than resend the entire series, here is v5.1 of this patch. > Other than this please add my: > > Reviewed-by: Stefan Roese <sr@denx.de> Thanks! 8<--------------------------------- >From 20704e35a41664de5f516ed0e02981ac06085102 Mon Sep 17 00:00:00 2001 From: Ian Campbell <ijc@hellion.org.uk> Date: Fri, 7 Mar 2014 04:29:39 +0000 Subject: [PATCH v5.1 7/8] sunxi: mmc support This adds support for the MMC controller on the Allwinner A20 (sun7i) processor. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Luke Leighton <lkcl@lkcl.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Wills Wang <wills.wang.open@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Cc: Aaron Maoye <leafy.myeh@allwinnertech.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: Tom Rini <trini@ti.com>
* sunxi: add gmac Ethernet supportIan Campbell2014-05-25-1/+75
| | | | | | | | | | | Add support for the GMAC Ethernet controller on Allwinner A20 (sun7i) processors. Enable for the Cubietruck. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
* sunxi: add support for Cubietruck booting in FEL modeIan Campbell2014-05-25-0/+33
| | | | | | | | Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Tom Rini <trini@ti.com> Reviewed-by: Marek Vasut <marex@denx.de>
* sunxi: add sun7i cpu, board and start of day supportIan Campbell2014-05-25-1/+572
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds generic board, start of day and basic build system support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by: Adam Sampson <ats@offog.org> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Luc Verhaegen <libv@skynet.be> Signed-off-by: Luke Leighton <lkcl@lkcl.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Patrick Wood <patrickhwood@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Wills Wang <wills.wang.open@gmail.com> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
* sunxi: add sun7i dram setup supportIan Campbell2014-05-25-0/+773
| | | | | | | | | | | | | | | | | | | | This patch adds DRAM initialisation support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Luke Leighton <lkcl@lkcl.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
* sunxi: add sun7i pinmux and gpio supportIan Campbell2014-05-25-0/+209
| | | | | | | | | | | | | | | | | | This patch adds the basic pinmux and gpio support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Henrik Nordström <henrik@henriknordstrom.net> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Tom Rini <trini@ti.com> Acked-by: Marek Vasut <marex@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
* sunxi: add sun7i clocks and timer support.Ian Campbell2014-05-25-0/+727
| | | | | | | | | | | | | | | | | | | | | | This patch adds the basic clocks and timer support for the Allwinner A20 (sun7i) processor. This code will not been compiled until the build is hooked up in a later patch. It has been split out to keep the patches manageable. Some of the code here is common to multiple sunxi subarchtectures, hence files are named sun4i which is the earliest similar variant. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Luke Leighton <lkcl@lkcl.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Stefan Roese <sr@denx.de> Cc: Tom Cubie <Mr.hipboi@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
* boards.cfg: update highbank maintainer emailRob Herring2014-05-25-1/+1
| | | | | | My Calxeda email is gone, so update my email address. Signed-off-by: Rob Herring <robh@kernel.org>
* arm: vf610: add DDR_SEL_PAD_CONTR registerStefan Agner2014-05-25-1/+3
| | | | | | | | Set DDR_SEL_PAD_CONTR register explicitly to DDR3 which solves RAM issues with newer silicon (1.1). This register was added in revision 4 of the Vybrid Reference Manual. Signed-off-by: Stefan Agner <stefan@agner.ch>
* Arm64 fix a bug of vbar_el3 initializationDavid Feng2014-05-25-2/+2
| | | | Signed-off-by: David Feng <fenghua@phytium.com.cn>
* ARM: highbank: convert to generic boardRob Herring2014-05-25-0/+1
| | | | | | Enable CONFIG_SYS_GENERIC_BOARD on highbank. Signed-off-by: Rob Herring <robh@kernel.org>
* lsxl: rework boot scriptsMichael Walle2014-05-25-9/+31
| | | | | | | | | | | | Move addresses for kernel, ramdisk and fdt blob to own variables. Add dtb blob loading to all existing boot scripts, dtb filenames were taken from vanilla kernel. Introduce new boot script bootcmd_legacy, which only loads a kernel and a ramdisk. Make this the default boot script. This should also restore the behaviour of the original bootloader. Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Michael Walle <michael@walle.cc>
* lsxl: use 64bit for LBA48 to support 4 TB drivesMichael Walle2014-05-25-0/+1
| | | | | Cc: Prafulla Wadaskar <prafulla@marvell.com> Signed-off-by: Michael Walle <michael@walle.cc>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-05-24-527/+2383
|\
| * Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-05-24-468/+1757
| |\
| | * compulab: eeprom: enable any i2c driverIlya Ledvich2014-05-23-2/+2
| | | | | | | | | | | | | | | | | | | | | Make the common eeprom library available for any I2C driver. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| | * cm-t54: add environment partition runtime detectionDmitry Lifshitz2014-05-23-0/+23
| | | | | | | | | | | | | | | | | | | | | Add environment partition runtime detection callback. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| | * cm-t54: add EEPROM support and MAC address handlingDmitry Lifshitz2014-05-23-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cm-t54 Eth MAC address is stored in onboard EEPROM. Add EEPROM support and setup stored Eth MAC address. If EEPROM does not contain a valid MAC, then generate it from the processor ID code (reference code is taken from OMAP5 uEvm board file). Modify Device Tree blob MAC address field with retrieved data. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| | * cm-t54: add cm-t54 board supportDmitry Lifshitz2014-05-23-0/+487
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add cm-t54 board directory, config file. Enable build. Basic support includes: Serial console SD/MMC eMMC USB Ethernet Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| | * am33xx: report silicon revision instead of codeSergey Alyoshin2014-05-23-18/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | As revision code 1 is for silicon revision 2.0, it is easily confused with silicon revision 1.0. Device type report also reworked in same style. Signed-off-by: Sergey Alyoshin <alyoshin.s@gmail.com>
| | * ARM: OMAP: Fix omap_sdram_size calculationLokesh Vutla2014-05-23-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Last section of DMM is used for trapping tiler unmapped sections. Corresponding trap_size should be deducted from total SDRAM size only if trap section is overlapping with available SDRAM based on DMM sections. Fixing the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| | * arm, am33xx: Enable CONFIG_SYS_GENERIC_BOARD for siemens boardsHeiko Schocher2014-05-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Tested-by: Samuel Egli <samuel.egli@siemens.com>
| | * omap4: duovero: Add Gumstix DuoVero machine.Ash Charles2014-05-23-0/+543
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the Gumstix DuoVero machine [1]. This is a OMAP4430-based computer-on-module (COM aka SOM) that can be mounted on various expansion boards with different peripherals. [1] https://store.gumstix.com/index.php/category/43/ Signed-off-by: Ash Charles <ash@gumstix.com> [trini: Rename gpmc_enable_gpmc_cs_config to gpmc_enable_gpmc_net_config] Signed-off-by: Tom Rini <trini@ti.com>
| | * armv7:TI: Add <asm/ti-common/sys_proto.h> and migrate omap_hw_init_contextTom Rini2014-05-23-112/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The omap_hw_init_context function (and assorted helpers) is the same for all OMAP-derived parts as when CHSETTINGS are used, that's the same and our DDR base is also always the same. In order to make this common we simply need to update the names of the define for DDR address space which is also common. Cc: Sricharan R. <r.sricharan@ti.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
| | * compulab: eeprom: add default eeprom addressIgor Grinberg2014-05-23-0/+5
| | | | | | | | | | | | | | | | | | Add default eeprom address setting. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| | * ARM: DRA7xx: ctrl: Fix efuse register addressesLokesh Vutla2014-05-23-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Efuse register addresses are wrongly programmed. Fixing the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@ti.com>
| | * ARM: DRA72x: Update EMIF dataLokesh Vutla2014-05-23-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | DRA72 has 1GB connected to EMIF1 only. Updating the details. And also enable WA for BUG0039 only if corresponding EMIF is present. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@ti.com>
| | * ARM: DRA72x: clocks: Update the hwdataLokesh Vutla2014-05-23-0/+7
| | | | | | | | | | | | | | | | | | | | | Adding the prcm, dplls, control module hooks for DRA72x. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@ti.com>
| | * ARM: DRA72x: volt: Update the pmic offsetsKeerthy2014-05-23-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | TPS65917 is used in DRA722 evm. Update the address offsets accordingly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tom Rini <trini@ti.com>
| | * ARM: DRA72x: Add Silicon ID supportLokesh Vutla2014-05-23-0/+5
| | | | | | | | | | | | | | | | | | | | | Add silicon ID code for DRA722 silicon. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@ti.com>
| | * ARM: omap: merge GPMC initialization code for all platformpekon gupta2014-05-23-110/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPMC controller on TI's OMAP SoC is general purpose controller to interface with different types of external devices like; - parallel NOR flash - parallel NAND flash - OneNand flash - SDR RAM - Ethernet Devices like LAN9220 Though GPMC configurations may be different for each platform depending on clock-frequency and external device interfacing with controller. But initialization sequence remains common across all platfoms. Thus this patch merges gpmc_init() scattered in different arch-xx/mem.c files into single omap-common/mem-common.c However, actual platforms specific register config values are still sourced from corresponding platform specific headers like; AM33xx: arch/arm/include/asm/arch-am33xx/mem.h OMAP3: arch/arm/include/asm/arch-omap3/mem.h OMAP4: arch/arm/include/asm/arch-omap4/mem.h OMAP4: arch/arm/include/asm/arch-omap5/mem.h Also, CONFIG_xx passed by board-profile decide config for which set of macros need to be used for initialization CONFIG_NAND: initialize GPMC for NAND device CONFIG_NOR: initialize GPMC for NOR device CONFIG_ONENAND: initialize GPMC for ONENAND device Signed-off-by: Pekon Gupta <pekon@ti.com> [trini: define GPMC_SIZE_256M for omap3] Signed-off-by: Tom Rini <trini@ti.com>
| | * ARM: omap5: add platform specific info for GPMC and ELM controllerspekon gupta2014-05-23-6/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves platform specific information for GPMC and ELM controller into separate header files, so that any derivative devices do not mess other header files. Platform specific information added into arch-xx/../hardware.h - CPU related platform specific details like base-address of GPMC and ELM Platform specific information added into arch-xx/../mem.h - Generic configs for GPMC and ELM initialization. - Hardware parameters or constrains specific to GPMC and ELM IP like; number of max number of chip-selects available Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * ARM: omap4: add platform specific info for GPMC and ELM controllerspekon gupta2014-05-23-6/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves platform specific information for GPMC and ELM controller into separate header files, so that any derivative devices do not mess other header files. Platform specific information added into arch-xx/../hardware.h - CPU related platform specific details like base-address of GPMC and ELM Platform specific information added into arch-xx/../mem.h - Generic configs for GPMC and ELM initialization. - Hardware parameters or constrains specific to GPMC and ELM IP like; number of max number of chip-selects available Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * omap3: overo: Use common configurations for OveroAsh Charles2014-05-23-194/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean-up the board configuration file for the Gumstix Overo board by including common omap3 definitions from ti_omap3_common.h as suggested here [1]. [1] http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/185960 Signed-off-by: Ash Charles <ashcharles@gmail.com> Conflicts: include/configs/omap3_overo.h
| | * Allow overo to boot with device treeAsh Charles2014-05-23-20/+38
| | | | | | | | | | | | | | | | | | | | | Update the board configuration for Gumstix Overo. In particular, add support for zImage and DTB files on boot. Signed-off-by: Ash Charles <ashcharles@gmail.com>
| | * OMAP3: overo: add some Gumstix expansion boardsAsh Charles2014-05-23-2/+56
| | | | | | | | | | | | | | | | | | | | | Add EEPROM ID switches for Alto35, Arbor43C, Stagecoach, Thumbo, and Turtlecore Gumstix Overo expansion boards. Signed-off-by: Ash Charles <ash@gumstix.com>
| | * Add Board Revision for Wireless chipAsh Charles2014-05-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Gumstix Overo COMs with board revision 0x4 use a different Wifi and Bluetooth module: Wi2Wi's W2CBW0015. No other code changes are required in u-boot---just handling of this particular board revision. Signed-off-by: Ash Charles <ashcharles@gmail.com>
| | * arm: omap3: Fix omap3_overo SPL boot hangupAsh Charles2014-05-23-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch f33b9bd3 [arm: omap3: Enable clocks for peripherals only if they are used] breaks SPL booting on Overo. Since some gpio inputs are read to detect the board revision. But with this patch above, the clocks to the GPIO subsystems are not enabled per default any more. The GPIO banks need to be configured specifically now. Signed-off-by: Ash Charles <ashcharles@gmail.com>
| | * OMAP3: overo: eliminate hard-coded partition offsetsAsh Charles2014-05-23-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The linux kernel is at nand0,3 using the current layout, but is best accessed through the partition label "linux". Since CONFIG_CMD_MTDPARTS is defined the CONFIG_JFFS2 settings are unreferenced; use "setenv partition rootfs" to set the default mtd partition for jffs2. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Tested-by: Ash Charles <ash@gumstix.com>
| | * OMAP3: overo: increase linux partition to 8 MiBPeter A. Bigot2014-05-23-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Linux kernel at version 3.5 is about 3.5 MiB; test kernels for 3.10 exceed 4 MiB. Prepare for future upgrades by increasing the NAND partition now. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Tested-by: Ash Charles <ash@gumstix.com>
| | * OMAP3: overo: add command support for mtd and ubiAsh Charles2014-05-23-3/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | The NAND linux partition format default was changed from jffs2 to ubi in 254973e6df0e48f1a72b67905185c774dcd9f394 but the corresponding commands were not enabled. Signed-off-by: Peter A. Bigot <pab@pabigot.com> Tested-by: Ash Charles <ash@gumstix.com>
| | * omap: overo: allow the use of a plain text env file instead boot scriptsAsh Charles2014-05-23-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adapted from d70f5480 described below. commit d70f54808dfa83b574e1239c3eccbcf3317343e1 Author: Javier Martinez Canillas <javier@dowhile0.org> Date: Mon Jan 7 03:51:20 2013 +0000 omap4: allow the use of a plain text env file instead boot scripts For production systems it is better to use script images since they are protected by checksums and carry valuable information like name and timestamp. Also, you can't validate the content passed to env import. But for development, it is easier to use the env import command and plain text files instead of script-images. Since both OMAP4 supported boards (Panda and TI SDP4430) are used primarily for development, this patch allows U-Boot to load env var from a text file in case that an boot.scr script-image is not present. The variable uenvcmd (if existent) will be executed (using run) after uEnv.txt was loaded. If uenvcmd doesn't exist the default boot sequence will be started. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Peter A. Bigot <pab@pabigot.com> Tested-by: Ash Charles <ash@gumstix.com>
| * | Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'Albert ARIBAUD2014-05-23-15/+55
| |\ \
| | * | arm: rmobile: lager: Enable CONFIG_SYS_GENERIC_BOARDNobuhiro Iwamatsu2014-05-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_SYS_GENERIC_BOARD to use common/board_*.c for lager. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | arm: rmobile: koelsch: Enable CONFIG_SYS_GENERIC_BOARDNobuhiro Iwamatsu2014-05-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_SYS_GENERIC_BOARD to use common/board_*.c for koelsch. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | arm: rmobile: armadillo800eva: Enable CONFIG_SYS_GENERIC_BOARDNobuhiro Iwamatsu2014-05-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_SYS_GENERIC_BOARD to use common/board_*.c for armadillo800eva. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | arm: rmobile: koelsch: Fix QoS revision 0.240 and 0.320Nobuhiro Iwamatsu2014-05-21-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add register define of DBSC3 operation adjustment register, and add initial value. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | arm: rmobile: r8a7791: Fix MOD_SEL3 function table about FN_SEL_IEBNobuhiro Iwamatsu2014-05-21-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FN_SEL_IEB is assigned 2bit, and 2bit can represent 4 patterns. However FN_SEL_IEB but we only use 3. It adds empty patterns as 0. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | arm: rmobile: koelsch: Add support ext4/fat write commandNobuhiro Iwamatsu2014-05-21-1/+4
| | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>