summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* arc: add selection of endianess in KconfigAlexey Brodkin2015-02-09-104/+11
| | | | | | | | | | | This change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features. It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: select cache settings via menuconfigAlexey Brodkin2015-02-09-17/+30
| | | | | | | | | | | This change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features. It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: define and use PTAG AUX regs for MMUv3 onlyAlexey Brodkin2015-02-09-5/+5
| | | | | | DC_PTAG and IC_PTAG registers only exist in MMUv3. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: add more flavours of ARC700 series CPUAlexey Brodkin2015-02-09-4/+52
| | | | | | | | | | | | | | | | Now we may select a particular version of ARC700: * ARC750D or * ARC770D It allows more flexible (or more fine tuned) configuration of U-Boot. Before that change we relied on minimal configuration but now we may use specific features of each CPU. Moreover allows us to escape manual selection of options that exist in both CPUs but may have say different version like MMUv2 in ARC750D vs MMUv3 in ARC770D. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: remove CPU hard-coded selection from board description in include/configsAlexey Brodkin2015-02-09-4/+0
| | | | | | | | | | With switch to Kconfig we only need very board-specific descriptions in include/configs. CPU selection is performed with either defconfig or manually via menuconfig. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* arc: memcmp - fix zero-delay loop utilizationIgor Guryanov2015-02-09-0/+2
| | | | | | | | It's prohibited to put branch instruction in the very end of zero-delay loop. On execution this causes "Illegal instruction" exception. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini2015-02-04-25/+1254
|\
| * ubifs: Enable journal replay during mountAnton Habegger2015-01-29-14/+978
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable ubifs_replay_journal during mount_ubifs, which was disabled before. This commit fix an issue with unrecoverable ubifs volumes after power cut. Therefor the gc.c is imported now from 1860e37 Linux 3.15 hs: added SPDX-License-Identifier for fs/ubifs/gc.c Signed-off-by: Anton Habegger <anton.habegger@gmail.com>
| * ubifs: Import atomic_long operations from LinuxAnton Habegger2015-01-28-11/+268
| | | | | | | | | | | | | | | | | | | | This commit is a preperation for a subsequent UBIFS commit which needs atomic_long operations. Therefor "include/asm-generic/atomic-long.h" is imported from 1860e37 Linux 3.15 Signed-off-by: Anton Habegger <anton.habegger@gmail.com>
| * ubi: reset mtd_devs when ubi part failHeiko Schocher2015-01-28-0/+8
| | | | | | | | | | | | | | if "ubi part" fails, reset also mtd_devs to 0, as further "ubi part" would use wrong mtd_devs. Signed-off-by: Heiko Schocher <hs@denx.de>
* | Prepare v2015.04-rc1Tom Rini2015-02-02-2/+2
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-02-02-72/+252
|\ \
| * | OMAP3: igep00x0: Fix boot hang and add support for status LED.Enric Balletbo i Serra2015-01-29-25/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the STATUS_LED APIs for indicating a boot progress instead of show_boot_progress. This patch also fixes a problem introduced with commit b3f4ca1135 (dm: omap3: Move to driver model for GPIO and serial). After that commit the board doesn't boot. Looks like the problem is the gpio_request call inside the function show_boot_progress. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
| * | davinci: Do not duplicate setting of gdTom Rini2015-01-29-16/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In f0c3a6c we stopped setting gd in board_init_f, but later had to revert to due problems on certain platforms. As davinci does not look to have these problems, we can drop the setting here and rely upon crt0.S to do it. Cc: Peter Howard <pjh@northern-ridge.com.au> Signed-off-by: Tom Rini <trini@ti.com>
| * | omap3: add some MUX definitions for upcoming cairoAlbert ARIBAUD \(3ADEV\)2015-01-29-2/+49
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | omap3: mmc: add 1.8v bias setting for MMC1Albert ARIBAUD \(3ADEV\)2015-01-29-0/+5
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | omap3: add SDRC settings for Samsung K4X51163PGAlbert ARIBAUD \(3ADEV\)2015-01-29-0/+43
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | omap3: make SDRC SHARING setting configurableAlbert ARIBAUD \(3ADEV\)2015-01-29-1/+6
| | | | | | | | | | | | Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | omap3: enable GP9 timer and UART2Albert ARIBAUD \(3ADEV\)2015-01-29-0/+9
| | | | | | | | | | | | | | | | | | These are needed for the upcoming Cairo board support. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
| * | Nokia RX-51: Use generic boardPali Rohár2015-01-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Generic board with #define CONFIG_SYS_GENERIC_BOARD is working fine. There is no visible difference between legacy and generic board code. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz>
| * | am335x_evm: Enable CONFIG_NAND_OMAP_GPMC_PREFETCHTom Rini2015-01-29-0/+1
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | ARM: OMAP5: DRA7xx: Add support for power rail groupingLubomir Popov2015-01-29-28/+118
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the DRA72x (J6Eco) EVM one PMIC SMPS is powering three SoC core rails. This concept of using one SMPS to supply multiple core domains (in various, although limited combinations, per primary device use case) has now become common and is used by many customer J6/J6Eco designs; it is supported by a number of corresponding PMIC OTP versions. This patch implements correct operation of the core voltages scaling routine by ensuring that each SMPS that is supplying more than one domain shall be written only once, and with the highest voltage of those fused in the SoC (or of those defined in the corresponding header if fuse read is disabled or fails) for the power rails belonging to the group. The patch also replaces some PMIC-related magic numbers with the appropriate definitions. The default OPP_NOM voltages for the DRA7xx SoCs are updated as well, per the latest DMs. Signed-off-by: Lubomir Popov <l-popov@ti.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-blackfinTom Rini2015-02-02-3/+3
|\ \ \
| * | | bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boardsSonic Zhang2015-01-16-2/+2
| | | | | | | | | | | | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * | | bfin: enlarge the monitor size for ip04 board to avoid oversize link errorSonic Zhang2015-01-16-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2015-02-02-331/+490
|\ \ \ \
| * | | | sunxi: mmc: Add 'sunxi_' prefix to the static functionsSiarhei Siamashka2015-02-02-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This results in a much more readable callgraph, because now they can't be confused with the function having exactly the same name in the generic mmc code. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: dram: Support more sun[457]i dram parameters in KconfigSiarhei Siamashka2015-02-02-3/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows to configure all the important DRAM parameters in Kconfig. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: dram: Optionally use standard JEDEC timings for sun[457]iSiarhei Siamashka2015-02-02-4/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In addition to the current Android magic settings, allow to optionally use DDR3 timing parameters, which are tailored for different clock frequencies and JEDEC speed bins. This should improve reliability and performance. Adding '+S:CONFIG_DRAM_TIMINGS_DDR3_1066F_1333H=y' to the board defconfig allows to use timings, which are calculated for the DDR3-1066F speed bin. A lot of DDR3 chips, which are used in real Allwinner based devices, support DDR3-1066F speed bin timings. And adding '+S:CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y' should work with any DDR3 chips, because this targets the slowest JEDEC speed bins. The vendor magic values are still used by default for DRAM, but board maintainers now have more flexibility in DRAM timings selection. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: video: Force h/vsync active high when using ext. vga dac on some boardsHans de Goede2015-02-02-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On both my A13-OLinuxIno and my A13-OLinuxIno-Micro, the vga output gives an unstable image when active low v or hsync is used. The problem seems to be specific to the OLinuxIno A13 (normal & micro) boards. I've just looked up the schematics and they use an opendrain driver for the vga sync lines, and with sync pulses it is the logical high->low edge of the pulse which counts for the timing, which with an active low sync is being driven by the pull-up, and that simply seems to not drive it hard enough to get a stable image. So force v and hsync active high on these boards. independent of what the modeline says. This fixes the unstable image. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | | sunxi: Add Inet 86VS supportMichal Suchanek2015-02-02-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: TZX-Q8-713B7 supportPaul Kocialkowski2015-02-02-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: Add Linksprite_pcDuino3_Nano board / defconfigAdam Sampson2015-02-02-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro USB socket for OTG and another for power in, HDMI, SATA, 5V power for SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a MIPI camera connector. Like the BananaPi, this board needs GMAC_TX_DELAY set to 3 in order for GMAC to work reliably at gigabit speeds. For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano Signed-off-by: Adam Sampson <ats@offog.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: MAINTAINERS: sort entries alphabeticallyHans de Goede2015-02-02-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep all entries except for the monster entry at the top alphabetically sorted. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()Hans de Goede2015-02-02-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that the device_mode_data is rsb specific, rather then slave specific, so integrate the rsb_set_device_mode() call into rsb_init(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | | sunxi: rsb: Add sun9i (A80 support)Hans de Goede2015-02-02-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the A80 to the rsb code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | | sunxi: Remove CONFIG_TARGET_FOO for sun5i and sun7i boardsHans de Goede2015-02-02-101/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_TARGET_FOO was only used in board/sunxi/Makefile to select the dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some special handling of the bananapi/bananapro (both sun7i), all sun5i and sun7i boards have been moved over to using a single dram_sun5i_autoconfig file, and the tx clk delay handling for the Banana boards now has its own Kconfig. IOW nothing is using CONFIG_TARGET_FOO anymore, so remove it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | | sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig optionHans de Goede2015-02-02-9/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And use this to set the GMAC Transmit Clock Delay Chain value on Banana boards, rather then keying of CONFIG_TARGET_FOO. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | | sunxi: Convert sun5i boards to use auto dram configurationHans de Goede2015-02-02-169/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we've separate detailed dram settings for all sun5i boards, this moves them over to using auto dram configuration so that we can get rid of all the per board dram_foo.c files. This has been tested on a A10s-Olinuxino, A13-Olinuxino, A13-OlinuxinoM, mk802-a10s and r7-tv-dongle board. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | | sunxi: Hyundai_A7HD_defconfig fix USB vbus pin configHans de Goede2015-02-02-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB1_VBUS is not used, and USB2_VBUS uses the pin normally used to control USB1_VBUS. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | | sunxi: Only enable i2c support in the SPL when neededHans de Goede2015-02-02-0/+3
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We do not need i2c support in the SPL when there is no PMIC (some sun4i boards), or when the PMIC is not using i2c such as on sun6i and sun8i. This reduces the SPL size from (e.g.) 21812 to 19260 bytes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | | Merge branch 'patman' of git://git.denx.de/u-boot-x86Tom Rini2015-01-31-26/+45
|\ \ \ \
| * | | | patman: Explain how to make doc/git-mailrc workSimon Glass2015-01-30-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an explanation for how to set up git so that patman can find the alias file. Fix up the get_maintainers message too. Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | sandbox: Fix README to indicate that vendor name is unsetSimon Glass2015-01-30-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This brings in a additional small fix which was missed in a recent update to the README. Suggested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | | | patman: Check commit_match before stripping leading whitespaceScott Wood2015-01-30-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | True commit lines start at column zero. Anything that is indented is part of the commit message instead. I noticed this by trying to run buildman with commit e3a4facdfc07179ebe017a07b8de6224a935a9f3 as master, which contained a reference to a Linux commit inside the commit message. ProcessLine saw that as a genuite commit line, and thus buildman tried to build it, and died with an exception because that SHA is not present in the U-Boot tree. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | | | patman: Make dry-run output match real functionalityPeter Tyser2015-01-30-14/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When run with the --dry-run argument patman prints out information showing what it would do. This information currently doesn't line up with what patman/git send-email really do. Some basic examples: - If an email address is addressed via "Series-cc" and "Patch-cc" patman shows that email address would be CC-ed two times. - If an email address is addressed via "Series-to" and "Patch-cc" patman shows that email address would be sent TO and CC-ed. - If an email address is addressed from a combination of tag aliases, get_maintainer.pl output, "Series-cc", "Patch-cc", etc patman shows that the email address would be CC-ed multiple times. Patman currently does try to send duplicate emails like the --dry-run output shows, but "git send-email" intelligently removes duplicate addresses so this patch shouldn't change the non-dry-run functionality. Change patman's output and email addressing to line up with the "git send-email" logic. This trims down patman's dry-run output and prevents confusion about what patman will do when emails are actually sent. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * | | | sandbox: Add a -D option to use a default device treeSimon Glass2015-01-30-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is painful to specify the full path to the device tree with the -d option. It is normally kept in the same directory as U-Boot, so provide an option to use this by default. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | | sandbox: Correct cros-ec keyboard definitionSimon Glass2015-01-30-4/+2
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | The other boards got updated to the standard binding. Update sandbox as well. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2015-01-31-2/+93
|\ \ \ \
| * | | | net/designware: add error message on DMA reset timeoutAlexey Brodkin2015-01-30-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If for some reason DMA module fails to reset user oserves only this: --->--- # dhcp Trying dwmac.e0018000 FAIL --->--- This message makes not much sense. With proposed change error message will be more helpful: --->--- # dhcp Trying dwmac.e0018000 DMA reset timeout FAIL --->--- For example user may do power toggle to recover board functionality. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@ti.com> Acked-by: Pavel Machek <pavel@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.1 at 2024-11-09 13:45:39 +0000