summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Update net subsystem maintainer in doc/git-mailrcJoe Hershberger2012-04-03-1/+2
| | | | Signed-off-by: Joe Hershberger <joe.hershberger@gmail.com>
* net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall backEric Miao2012-04-03-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ignore the return value of eth_getenv_enetaddr_by_index(), and if it fails, fall back to use dev->enetaddr, which could be filled up by the ethernet device driver: With the current code, introduced with below commit, eth_write_hwaddr() will fail immediately if there is no eth<n>addr in the environment variables. However, e.g. for an overo based product that uses the SMSC911x ethernet chip (with the MAC address set via EEPROM connected to the SMSC911x chip), the MAC address is still OK. On mx28 boards that are depending on the OCOTP bits to set the MAC address (like the Denx m28 board), the OCOTP bits should be used instead of failing on the environment variables. Actually, this was the original behavior, and was later changed by commit 7616e7850804c7c69e0a22c179dfcba9e8f3f587. Signed-off-by: Eric Miao <eric.miao@linaro.org> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> CC: Stefan Roese <sr@denx.de> CC: Eric Miao <eric.miao@linaro.org> CC: Wolfgang Denk <wd@denx.de> CC: Philip Balister <philip@balister.org> CC: Zach Sadecki <zach@itwatchdogs.com>
* mvgbe: remove warning for unused methodsStefan Bigler2012-04-03-0/+2
| | | | | | | | | | Some baords may use the GBE interface but they have no phy connected to the interface and a direct MAC/MAC interface. For them we need to get rid of compiler warnings. Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* Prepare v2012.04-rc1Wolfgang Denk2012-03-31-3/+3
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* net/altera_tse: use flush_dcache_range instead of flush_dcacheStefan Kristiansson2012-03-30-3/+6
| | | | | | | | | | flush_dcache is not declared in the common.h API, flush_dcache_range however is Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Ben Warren <biggerbadderben@gmail.com> Cc: Thomas Chou <thomas@wytron.com.tw> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* net/ethoc: use flush_dcache_range instead of flush_dcacheStefan Kristiansson2012-03-30-3/+3
| | | | | | | | | | flush_dcache is not declared in the common.h API, flush_dcache_range however is Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Ben Warren <biggerbadderben@gmail.com> Cc: Thomas Chou <thomas@wytron.com.tw> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2012-03-30-7/+116
|\ | | | | | | | | * 'master' of git://git.denx.de/u-boot-usb: Enable high speed support for USB device framework and usbtty
| * Enable high speed support for USB device framework and usbttyVipin KUMAR2012-03-28-7/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the support for high speed in usb device framework and usbtty driver. This feature has been kept within a macro CONFIG_USBD_HS, so the board configuration files have to define this macro to enable high speed support. Along with that specific peripheral drivers also need to define a function to let the framework know that the enumeration has happened at high speed. This function prototype is "int is_usbd_high_speed(void)" Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* | RAMDISK: Fix unused variable issue caused by raw rd supportMarek Vasut2012-03-30-0/+2
| | | | | | | | | | | | | | | | image.c: In function ‘boot_get_ramdisk’: image.c:800:8: warning: unused variable ‘end’ [-Wunused-variable] Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* | BOOT: Add RAW ramdisk support to bootzMarek Vasut2012-03-30-5/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows loading RAW ramdisk via bootz command. The raw ramdisk is loaded only in case it's size is specified: bootz <kernel addr> <ramdisk addr>:<ramdisk size> <fdt addr> For example: bootz 0x42000000 0x43000000:0x12345 0x44000000 Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Tom Warren <TWarren@nvidia.com> Cc: albert.u.boot@aribaud.net Cc: afleming@gmail.com Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
* | BOOT: Add "bootz" command to boot Linux zImage on ARMMarek Vasut2012-03-30-9/+171
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This command boots Linux zImage from where the zImage is loaded to. Passing initrd and fdt is supported. Tested on i.MX28 based DENX M28EVK Tested on PXA270 based Voipac PXA270. NOTE: This currently only supports ARM, but other architectures can be easily added by defining bootz_setup(). Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Warren <TWarren@nvidia.com> Cc: albert.u.boot@aribaud.net Cc: afleming@gmail.com, Cc: Simon Glass <sjg@chromium.org>, Cc: Stephen Warren <swarren@nvidia.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
* | mx28evk: fix build errorAnatolij Gustschin2012-03-30-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix: drivers/mmc/libmmc.o: In function `mxsmmc_send_cmd': /home/ag/git/u-boot/drivers/mmc/mxsmmc.c:210: undefined reference to `mxs_dma_desc_append' /home/ag/git/u-boot/drivers/mmc/mxsmmc.c:211: undefined reference to `mxs_dma_go' drivers/mmc/libmmc.o: In function `mxsmmc_initialize': /home/ag/git/u-boot/drivers/mmc/mxsmmc.c:306: undefined reference to `mxs_dma_desc_alloc' Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* | pci: declare pciauto functions in headerLinus Walleij2012-03-30-6/+5
| | | | | | | | | | | | | | | | | | | | | | The FSL PCI driver uses local prototypes for pciauto_[pre|post]scan_setup_bridge(), this does not seem right, so move them to the <pci.h> file. Fixed a small extern declaration too, this is harmless but distracts the view since all other prototypes are explicitly external. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pci: get rid of local prototypesLinus Walleij2012-03-30-8/+0
| | | | | | | | | | | | | | | | two boards were redeclaring pciauto_region_allocate() in their local scope for no obvious reason, the function is in <pci.h> anyway, this is probably just copying artifacts and old cruft. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Add support for loading and saving the environment to a FAT partitionMaximilian Schwerin2012-03-30-1/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following must be defined: CONFIG_ENV_IS_IN_FAT Enable this saving environment to FAT. FAT_ENV_INTERFACE Interface the FAT resides on (e.g. mmc). FAT_ENV_DEVICE The interface device number (e.g. 0 for mmc0) FAT_ENV_PART The device part (e.g. 1 for mmc0:1) FAT_ENV_FILE The filename of the environment file. Author: Maximilian Schwerin <mvs@tigris.de> Removed dead DEBUG comment. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | MAKEALL: Add -m/-M option to determine maintainersMarek Vasut2012-03-30-3/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The -m option tries to find the board in MAINTAINERS file and figure out the email. The -M option lists boards including their maintainers emails and all affiliated emails. There are multiple strategies used to retrieve these emails: 1) Check board/<boardname> with git log and use three most recent emails 2) Check board/<boardname> with git log and use three most used emails 3) Try finding board in MAINTAINERS file and retrieve all emails from there The result is then sorted and unique results are retrieved and reported. For -m option, only strategy 3) is used. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* | cmd_log: print log->v2.con value in the "log info" commandHeiko Schocher2012-03-30-0/+1
| | | | | | | | | | | | | | | | print in the "log info" command, if "log_version = 2" also the value from "log->v2.con". Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* | command, log: Coding Style cleanupHeiko Schocher2012-03-30-45/+51
| | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* | command, log: print with "log show" a full logbufferHeiko Schocher2012-03-30-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the logbuffer contains LOGBUFF_LEN chars, they never got printed with the "log show" command, because chars get printed with the following for loop: for (i = 0; i < (size & LOGBUFF_MASK); i++) { with size = LOGBUFF_LEN and LOGBUFF_MASK = (LOGBUFF_LEN-1) for loop never executed ... Fix this. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Fixed merge conflict. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | drivers/mmc/mmc.c: Fix build warningAnatolij Gustschin2012-03-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix: mmc.c: In function 'mmc_bounce_buffer_start': mmc.c:132:13: warning: no return statement in function returning non-void [-Wreturn-type] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Andy Fleming <afleming@gmail.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* | drivers/mmc/tegra2_mmc.c: fix GCC 4.6 warningAnatolij Gustschin2012-03-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | Fix: tegra2_mmc.c: In function 'mmc_send_cmd': tegra2_mmc.c:230:3: warning: 'mask' may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Doug Anderson <dianders@chromium.org> Cc: Tom Warren <twarren@nvidia.com>
* | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2012-03-30-132/+210
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of /home/wd/git/u-boot/custodians: lzma: fix printf warnings Remove CONFIG_SYS_EXTBDINFO from snapper9260.h cmd_pxe.c: fix strict-aliasing warnings net: smc91111: use mdelay() doc: Fix some typos in different files disk/part.c: Fix device enumeration through API mkenvimage: Really set the redundant byte when applicable mkenvimage: Don't try to detect comments in the input file mkenvimage: Use mmap() when reading from a regular file mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-" mkenvimage: More error handling mkenvimage: Correct an include and add a missing one mkenvimage: correct and clarify comments and error messages MAKEALL: display SPL size if present ARMV7/Vexpress: add missing get_ticks() and get_tbclk() mkenvimage: fix usage message cmd_fat: add FAT write command fs/fat/fat_write.c: Fix GCC 4.6 warnings FAT write: Fix compile errors
| * \ Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2012-03-30-132/+210
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'agust@denx.de' of git://git.denx.de/u-boot-staging: lzma: fix printf warnings Remove CONFIG_SYS_EXTBDINFO from snapper9260.h cmd_pxe.c: fix strict-aliasing warnings net: smc91111: use mdelay() doc: Fix some typos in different files disk/part.c: Fix device enumeration through API mkenvimage: Really set the redundant byte when applicable mkenvimage: Don't try to detect comments in the input file mkenvimage: Use mmap() when reading from a regular file mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-" mkenvimage: More error handling mkenvimage: Correct an include and add a missing one mkenvimage: correct and clarify comments and error messages MAKEALL: display SPL size if present ARMV7/Vexpress: add missing get_ticks() and get_tbclk() mkenvimage: fix usage message cmd_fat: add FAT write command fs/fat/fat_write.c: Fix GCC 4.6 warnings FAT write: Fix compile errors
| | * | lzma: fix printf warningsMike Frysinger2012-03-28-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix size_t printf format warnings: LzmaTools.c: In function 'lzmaBuffToBuffDecompress': LzmaTools.c:110:5: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'SizeT' LzmaTools.c:111:5: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'SizeT' Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Remove CONFIG_SYS_EXTBDINFO from snapper9260.hSimon Glass2012-03-27-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is not available on ARM, so it is an error to define it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | cmd_pxe.c: fix strict-aliasing warningsJason Hobbs2012-03-27-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch, some versions of gcc (at least ELDK 4.2) complain about dereferencing type-punned pointers. Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
| | * | net: smc91111: use mdelay()Mike Frysinger2012-03-27-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | We've already got a mdelay() func in common code, so use that instead. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | doc: Fix some typos in different filesThomas Weber2012-03-27-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | adresses/addresses alernate/alternate asssuming/assuming calcualted/calculated enviroment/environment evalutation/evaluation falsh/flash labled/labeled paramaters/parameters Signed-off-by: Thomas Weber <thomas@tomweber.eu> Acked-by: Anatolij Gustschin <agust@denx.de>
| | * | disk/part.c: Fix device enumeration through APITim Kientzle2012-03-27-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch below fixes device enumeration through the U-Boot API. Device enumeration crashes when the system in question doesn't have any RAM mapped to address zero (I discovered this on a BeagleBone board), since the enumeration calls get_dev with a NULL ifname sometimes which then gets passed down to strncmp(). This fix simply ensures that get_dev returns NULL when invoked with a NULL ifname. Signed-off-by: Tim Kientzle <kientzle@freebsd.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | mkenvimage: Really set the redundant byte when applicableDavid Wagner2012-03-27-1/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: David Wagner <david.wagner@free-electrons.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | mkenvimage: Don't try to detect comments in the input fileDavid Wagner2012-03-27-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove this feature since it seems impossible to reliably detect them. Signed-off-by: David Wagner <david.wagner@free-electrons.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | mkenvimage: Use mmap() when reading from a regular fileDavid Wagner2012-03-27-6/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fall back to read() if it fails. Signed-off-by: David Wagner <david.wagner@free-electrons.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-"David Wagner2012-03-27-13/+13
| | | | | | | | | | | | | | | | | | | | Signed-off-by: David Wagner <david.wagner@free-electrons.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | mkenvimage: More error handlingDavid Wagner2012-03-27-2/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Verbosly fail if the target environment size or the padding byte are badly formated. Verbosly fail if something bad happens when reading from standard input. Signed-off-by: David Wagner <david.wagner@free-electrons.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | mkenvimage: Correct an include and add a missing oneDavid Wagner2012-03-27-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | compiler.h needs to be included from U-Boot's headers. Also, group U-Boot-specific includes together stdlib.h was missing. Signed-off-by: David Wagner <david.wagner@free-electrons.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | mkenvimage: correct and clarify comments and error messagesDavid Wagner2012-03-27-25/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, don't split error messages over several lines as per a coding style exception making them easier to grep. Signed-off-by: David Wagner <david.wagner@free-electrons.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | MAKEALL: display SPL size if presentScott Wood2012-03-26-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes it easier to detect changes in the SPL portion, as can currently be done for the main U-Boot image. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Tom Rini <trini@ti.com>
| | * | ARMV7/Vexpress: add missing get_ticks() and get_tbclk()Liming Wang2012-03-26-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f31a911fe (arm, post: add missing post_time_ms for arm) enables get_ticks and get_tbclk for all arm based boards, arm/vexpress also needs these functions to work. Signed-off-by: Liming Wang <walimisdev@gmail.com> Acked-by: Matt.Waddel@linaro.org
| | * | mkenvimage: fix usage messageWolfgang Denk2012-03-26-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't use argv[0] for usage() because it may or may not be clobbered by the previous call to basename(). Use "prg" instead as it is done in the rest of the code. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | cmd_fat: add FAT write commandDonggeun Kim2012-03-26-2/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once CONFIG_FAT_WRITE is defined, users can invoke 'fatwrite' command that saves data in RAM as a FAT file. This patch was originally part of http://article.gmane.org/gmane.comp.boot-loaders.u-boot/121847 Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Maximilian Schwerin <mvs@tigris.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | fs/fat/fat_write.c: Fix GCC 4.6 warningsAnatolij Gustschin2012-03-26-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: fat_write.c: In function 'find_directory_entry': fat_write.c:826:8: warning: variable 'prevcksum' set but not used [-Wunused-but-set-variable] fat_write.c: In function 'do_fat_write': fat_write.c:933:6: warning: variable 'root_cluster' set but not used [-Wunused-but-set-variable] fat_write.c:925:12: warning: variable 'slotptr' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Donggeun Kim <dg77.kim@samsung.com> Acked-by: Maximilian Schwerin <mvs@tigris.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
| | * | FAT write: Fix compile errorsDonggeun Kim2012-03-24-12/+8
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes compile errors introduced by commit 9813b750f32c0056f0a35813b9a9ec0f68b664af 'fs/fat: Fix FAT detection to support non-DOS partition tables' fat_write.c: In function 'disk_write': fat_write.c:54: error: 'part_offset' undeclared (first use in this function) fat_write.c:54: error: (Each undeclared identifier is reported only once fat_write.c:54: error: for each function it appears in.) fat_write.c: In function 'do_fat_write': fat_write.c:950: error: 'part_size' undeclared (first use in this function) These errors only appear when this code is enabled by defining CONFIG_FAT_WRITE option. This patch was originally part of http://article.gmane.org/gmane.comp.boot-loaders.u-boot/121847 Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Maximilian Schwerin <mvs@tigris.de> Fixed patch author and added all needed SoB from the original patch and also submitter's SoB. Extended commit log. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | post: remove #warning for kirkwood CPUsValentin Longchamp2012-03-30-2/+1
|/ / | | | | | | | | | | | | | | | | | | | | Since commit 96f5c4b the needed functions (get_ticks() and get_tbclk() ) are defined for kirkwood CPUs as well. This warning is then not relevant anymore. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Albert Aribaud <albert.u.boot@aribaud.net>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2012-03-30-4188/+6109
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: (146 commits) arm: Use common .lds file where possible arm: add a common .lds link script arm: Remove unneeded setting of LDCSRIPT Define CPUDIR for the .lds link script arm: Remove zipitz2 link script Allow arch directory to contain .lds without requiring Makefile OMAP: Remove omap1610inn-based boards arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix build warnings board/ti/beagle/beagle.c: Fix build warnings sdrc.c: Fix typo in do_sdrc_init() for SPL tegra: i2c: Add I2C driver tegra: fdt: i2c: Add extra I2C bindings for U-Boot tegra: i2c: Select I2C ordering for Seaboard tegra: i2c: Enable I2C on Seaboard tegra: i2c: Select number of controllers for Tegra2 boards tegra: i2c: Initialise I2C on Nvidia boards tegra: Enhance clock support to handle 16-bit clock divisors fdt: Add function to allow aliases to refer to multiple nodes tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE tegra: fdt: Enable FDT support for Ventana tegra: fdt: Enable FDT support for Seaboard tegra: usb: Enable USB on Seaboard tegra: usb: Add common USB defines for tegra2 boards tegra: usb: Add USB support to nvidia boards arm: Check for valid FDT after console is up fdt: Avoid early panic() when there is no FDT present tegra: usb: Add support for Tegra USB peripheral tegra: fdt: Add function to return peripheral/clock ID usb: Add support for txfifo threshold tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard tegra: usb: fdt: Add additional device tree definitions for USB ports tegra: fdt: Add clock bindings for Tegra2 Seaboard tegra: fdt: Add clock bindings tegra: fdt: Add additional USB binding fdt: Add tegra-usb bindings file from linux fdt: Add staging area for device tree binding documentation tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel tegra: fdt: Add Tegra2x device tree file from kernel arm: fdt: Add skeleton device tree file from kernel fdt: Add basic support for decoding GPIO definitions fdt: Add functions to access phandles, arrays and bools fdt: Tidy up a few fdtdec problems fdt: Add tests for fdtdec fdt: Add fdtdec_find_aliases() to deal with alias nodes arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load net: fec_mxc: allow use with cache enabled net: force PKTALIGN to ARCH_DMA_MINALIGN i.MX28: Enable caches by default i.MX28: Make use of the bounce buffer i.MX28: Do data transfers via DMA in MMC driver MMC: Implement generic bounce buffer i.MX28: Add cache support to MXS NAND driver i.MX28: Add cache support into the APBH DMA driver ARM926EJS: Implement cache operations board/vpac270/onenand.c: Fix build errors nhk8815: fix build errors atmel-boards: add missing atmel_mci.h ARM: highbank: setup env from boot source register ARM: highbank: change env config to use nvram ARM: highbank: add reset support ARM: highbank: Add boot counter support ARM: highbank: change TEXT_BASE to 0x8000 ARM: highbank: fix us_to_tick calculation ARM: highbank: add missing get_tbclk ARM: highbank: fix warning for calxedaxgmac_initialize net: calxedaxgmac: fix build due to missing __aligned definition EXYNOS: Add structure for Exynos4 DMC EXYNOS: SMDK5250: Support all 4 UARTs ARM: fix s3c2410 timer code ARM: davinci: fixes for cam_enc_4xx board omap3_spi: receive transmit mode calimain, enbw_cmc: Fix typo in comments Davinci: ea20: use gpio framework to access gpios OMAP3: mt_ventoux: sets its own mtdparts OMAP3: mt_ventoux: updated timing for FPGA twl4030: fix potential power supply handling issues NAND: TI: fix warnings in omap_gpmc.c cam_enc_4xx: Rename 'images' to 'imgs' arm: Add Prep subcommand support to bootm OMAP3: twister: add support to boot Linux from SPL SPL: call cleanup_before_linux() before booting Linux OMAP3: SPL: do not call I2C init if no I2C is set. Add cache functions to SPL for armv7 devkit8000: Implement and activate direct OS boot omap/spl: change output of spl_parse_image_header omap-common/spl: Add linux boot to SPL devkit8000/spl: init GPMC for dm9000 in SPL omap-common: Add NAND SPL linux booting devkit8000: add config for spl command Add cmd_spl command mx53ard: Initialize return code with error mx53: Make PLL2 to be the parent of UART clock configs: imx: Use CONFIG_SF_DEFAULT_CS mx28evk: Provide default values for SPI bus and chip select USB: ehci-mx6: Add proper IO accessors mx6: Read silicon revision from register i.MX28: Drop __naked function from spl_mem_init mxs_spi: Return proper timeout error i.MX28: Make the stabilization delays shorter pmic_i2c: Return error in case of invalid pmic_i2c_tx_num mx6: Remove duplicate definition of ANATOP_BASE_ADDR mx6: Fix reset cause for Power On Reset case i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG i.MX28: Enable additional DRAM address bits mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment mx31: add "ARM11P power gating" to get_reset_cause mx31pdk: Fix CONFIG_SYS_MEMTEST_END efikamx: Fix CONFIG_SYS_MEMTEST_END mx53smd: Fix CONFIG_SYS_MEMTEST_END mx53evk: Fix CONFIG_SYS_MEMTEST_END mx51evk: Fix CONFIG_SYS_MEMTEST_END i.MX6: mx6qsabrelite: add ext2 support imximage: Remove overwriting of flash_offset IXP: Fix GPIO_INT_ACT_LOW_SET() IXP: Fix NAND build warning on PDNB3 and SCPU IXP: Move PDNB3 and SCPU from Makefile to boards.cfg IXP: Squash warnings in IXP NPE IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST} IXP: Make IXP buildable with arm-linux- toolchains Examples: Properly append LDFLAGS to LD command SPL: Enable YMODEM support on BeagleBone and AM335x EVM SPL: Add YMODEM over UART load support SPL: Add README.omap3 README: document more SPL config options spl.c: Use __noreturn decorator config.mk: Check for -fstack-usage support config.mk: Make cc-option create a file under include/generated ...
| * | arm: Use common .lds file where possibleSimon Glass2012-03-30-1071/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each cpu directory currently has its own .lds file. This is only needed in most cases because the start.o file is in a different subdir. Now that we can factor out this difference, we can move most cpus over to the common .lds file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | arm: add a common .lds link scriptSimon Glass2012-03-30-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most ARM CPUs use a very similar link script. This adds a basic script that can be used by most CPUs. Two new symbols are introduced which are intended to eventually be defined on all architectures to make things easier for generic relocation and reduce special-case code for each architecture: __image_copy_start is the start of the text area (equivalent to the existing _start on ARM). It marks the start of the region which must be copied to a new location during relocation. This symbol is called __text_start on x86 and microblaze. __image_copy_end is the end of the region which must be copied to a new location during relocation. It is normally equal to the start of the BSS region, but this can vary in some cases (SPL?). Making this an explicit symbol on its own removes any ambiguity and permits common code to always do the right thing. This new script makes use of CPUDIR, now defined by both Makefile and spl/Makefile, to find the directory containing the start.o object file, which is always placed first in the image. To permit MMU setup prior to relocation (as used by pxa) we add an area to the link script which contains space for this. This is taken from commit 7f4cfcf. CPUs can put the contents in there using their start.S file. BTW, shouldn't that area be 16KB-aligned? Signed-off-by: Simon Glass <sjg@chromium.org>
| * | arm: Remove unneeded setting of LDCSRIPTSimon Glass2012-03-30-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is set by the top level Makefile anyway, so drop it. This does have the effect of changing the order - now the board link script will have preference over the CPU one. But this seems more correct anyway. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | Define CPUDIR for the .lds link scriptSimon Glass2012-03-30-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most link scripts differ only in the directory containing the start.o file. Make this a #define to remove this last difference. (Note that if start.o were disallowed outside the CPU start directory then we wouldn't even need this. But that is a separate discussion.) Signed-off-by: Simon Glass <sjg@chromium.org>
| * | arm: Remove zipitz2 link scriptSimon Glass2012-03-30-56/+0
| | | | | | | | | | | | | | | | | | | | | This link script doesn't appear to do anything useful or unique, so drop it, and rely on the CPU one. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | Allow arch directory to contain .lds without requiring MakefileSimon Glass2012-03-30-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Makefile for a CPU is in arch/($ARCH)/cpu/$(CPU). We want to support having an .lds file in arch/$(ARCH)/cpu without requiring an additional Makefile there. This change makes it clear that we expect a Makefile in the same directory as the link script except in this case. Signed-off-by: Simon Glass <sjg@chromium.org>