summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Merge git://git.denx.de/u-boot-arcTom Rini2015-02-09-167/+639
|\
| * arc: build libgcc in U-BootAlexey Brodkin2015-02-09-0/+528
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This way we may have very limited set of functions implemented so we save some space. Also it allows us to build U-Boot for any ARC core with the same one toolchain because we don't rely on pre-built libgcc. For example: * we may use little-endian toolchain but build U-Boot for ether endianess * we may use non-multilibbed uClibc toolchain but build U-Boot for whatever ARC CPU flavour that current GCC supports Private libgcc built from generic C implementation contributes only 144 bytes to .text section so we don't see significant degradation of size: --->8--- $ arc-linux-size u-boot.libgcc-prebuilt text data bss dec hex filename 222217 24912 214820 461949 70c7d u-boot.libgcc-prebuilt $ arc-linux-size u-boot.libgcc-private text data bss dec hex filename 222361 24912 214820 462093 70d0d u-boot.libgcc-private --->8--- Also I don't notice visible performance degradation compared to pre-built libgcc (where at least "*div*" functions are had-written in assembly) on typical operations of downloading 10Mb uImage over TFTP and bootm. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: move CPU flags selection to the main "config.mk"Alexey Brodkin2015-02-09-8/+5
| | | | | | | | | | | | | | | | | | As a preparation to ARCv2 port submission we're moving CPU slection flags to a common location. Also it will allow us to have more flexible CPU specification, not only ISA version but CPU family as well checking CONFIG_ARC_CPU_xxx. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: move SYS_MONITOR_BASE setup in KonfigAlexey Brodkin2015-02-09-5/+6
| | | | | | | | | | | | | | Following SPARK ARC now has SYS_MONITOR_BASE setup via Kconfig. This makes "include/configs/*.h" cleaner and more flexible. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: hard-code CONFIG_ARCH_EARLY_INIT_R in asm/config.hAlexey Brodkin2015-02-09-15/+1
| | | | | | | | | | | | | | Common arch_early_init_r() is used in "arc/lib/cpu.c" for all ARC boards so there's no sense in separate per-board definitions. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: get rid of useless CONFIG_SKIP_LOWLEVEL_INITAlexey Brodkin2015-02-09-4/+0
| | | | | | | | | | | | | | Currently there's nothing related to really low-level init on ARC so CONFIG_SKIP_LOWLEVEL_INIT definition makes no sense. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: hard-code CONFIG_SYS_GENERIC_BOARD into asm/config.hAlexey Brodkin2015-02-09-3/+1
| | | | | | | | | | | | | | | | | | There're no other options for ARC except "generic board" so ther's no point to define CONFIG_SYS_GENERIC_BOARD per board. We now have it set fo all ARC boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: add selection of endianess in KconfigAlexey Brodkin2015-02-09-104/+11
| | | | | | | | | | | | | | | | | | | | | | This change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features. It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: select cache settings via menuconfigAlexey Brodkin2015-02-09-17/+30
| | | | | | | | | | | | | | | | | | | | | | This change allows to keep board description clean and minimalistic. This is especially helpful if one board may house different CPUs with different features. It is applicable to both FPGA-based boards or those that have CPUs mounted on interchnagable daughter-boards. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: define and use PTAG AUX regs for MMUv3 onlyAlexey Brodkin2015-02-09-5/+5
| | | | | | | | | | | | DC_PTAG and IC_PTAG registers only exist in MMUv3. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: add more flavours of ARC700 series CPUAlexey Brodkin2015-02-09-4/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now we may select a particular version of ARC700: * ARC750D or * ARC770D It allows more flexible (or more fine tuned) configuration of U-Boot. Before that change we relied on minimal configuration but now we may use specific features of each CPU. Moreover allows us to escape manual selection of options that exist in both CPUs but may have say different version like MMUv2 in ARC750D vs MMUv3 in ARC770D. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: remove CPU hard-coded selection from board description in include/configsAlexey Brodkin2015-02-09-4/+0
| | | | | | | | | | | | | | | | | | | | With switch to Kconfig we only need very board-specific descriptions in include/configs. CPU selection is performed with either defconfig or manually via menuconfig. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: memcmp - fix zero-delay loop utilizationIgor Guryanov2015-02-09-0/+2
| | | | | | | | | | | | | | | | It's prohibited to put branch instruction in the very end of zero-delay loop. On execution this causes "Illegal instruction" exception. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
* | kwbimage: Make the Makefile pass in CONFIG_SYS_SPI_U_BOOT_OFFSTom Rini2015-02-07-1/+4
| | | | | | | | | | | | | | We can't use config.h directly as some platforms include headers that aren't safe to use in normal Linux userland. Signed-off-by: Tom Rini <trini@ti.com>
* | Merge git://git.denx.de/u-boot-marvellTom Rini2015-02-06-45/+17925
|\ \
| * | arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR supportStefan Roese2015-02-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following compilation warning for maxbcm: Building maxbcm board... text data bss dec hex filename 160075 6596 38240 204911 3206f ./u-boot board/maxbcm/maxbcm.c: In function 'reset_phy': board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable] u16 reg; ^ board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr' [-Wunused-variable] u16 devadr = CONFIG_PHY_BASE_ADDR; ^ Additionally support Spansion SPI NOR flash is added. With larger SPI device support via the CONFIG_SPI_FLASH_BAR define. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdrStefan Roese2015-02-06-0/+15419
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the DDR3 setup and training code taken from the Marvell U-Boot repository. This code used to be included as a binary (bin_hdr) into the AXP boot image. Not linked with the main U-Boot. With this code addition and the following serdes/PHY setup code, the Armada-XP support in mainline U-Boot is finally self-contained. So the complete image for booting can be built from mainline U-Boot. Without any additional external inclusion. Hopefully other MVEBU SoC's will follow here. Support for some SoC's has been removed in this version. This is: MV_MSYS: The code referred to by the MV_MSYS define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F68XX (A38x): The code referred to by the MV88F68XX define (A38x) is currently unused. And its partial and not sufficient for this device in this stage. So lets remove it to make the code clearer and increase the readability. MV88F66XX (ALP): The code referred to by the MV88F66XX define is currently unused. And its not really planned to support this in mainline. So lets remove it to make the code clearer and increase the readability. MV88F78X60_Z1: The code referred to by the MV88F78X60_Z1 define is currently unused. As the Z1 revision of the AXP is not supported in mainline anymore. So lets remove it to make the code clearer and increase the readability. Remove support for Z1 & A0 AXP revisions (steppings). The current stepping is B0 and this is the only one that is actively supported in this code version. Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and on a custom fixed DDR configuration board (maxbcm). Note: This code has undergone many hours of coding-style cleanup and refactoring. It still is not checkpatch clean though, I'm afraid. As the factoring of the code has so many levels of indentation that many lines are longer than 80 chars. This might be some task to tackly later on. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: Add Serdes PHY config codeStefan Roese2015-02-06-0/+2114
| | | | | | | | | | | | | | | | | | | | | | | | | | | This code is ported from the Marvell bin_hdr code into mainline SPL U-Boot. It needs to be executed very early so that the devices connected to the serdes PHY are configured correctly. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: armada-xp: Add SPL support used to include the DDR training codeStefan Roese2015-02-06-0/+172
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds SPL support to the Marvell Armada-XP. With this addition the bin_hdr integration is not needed any more. The SPL will first initialize the serdes/PHY and the call the DDR setup and training code now integrated into mainline U-Boot. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | scripts/Makefile.spl: Add MVEBU DDR code to SPLStefan Roese2015-02-06-0/+1
| | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | tools: kwbimage: Support u-boot.img padding to CONFIG_SYS_SPI_U_BOOT_OFFSStefan Roese2015-02-06-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is used on the AXP boards, to pad u-boot.img to the desired offset in SPI flash (only this boot target supported right now). This offset is used by the SPL then to load u-boot.img into SDRAM and execute it there. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | Makefile: Add another kwb build target used on Marvell Armada-XP (AXP)Stefan Roese2015-02-06-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | This build target now includes the SPL binary as the bin_hdr into the kwb image. Its used on the AXP port with the mainlined DDR training code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: db-mv784mp-gp: Enable SPL to include DDR training code into U-BootStefan Roese2015-02-06-3/+54
| | | | | | | | | | | | | | | | | | | | | This patch adds SPL support to the db-mv784mp-gp eval board. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: maxbcm: Enable SPL to include DDR training code into U-BootStefan Roese2015-02-06-5/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds SPL support to the maxbcm MV78460 based board. Including the fixed DDR configuratrion needed for the DDR training code. And the the serdes PHY init code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: mvebu: Placeholder bin_hdr file can now be removedStefan Roese2015-02-06-34/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | With this patchset the Marvell bin_hdr (DDR training) code is intergrated into mainline U-Boot. We can remove the placeholder file again, which was only introduced to make U-Boot compile and link again. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | arm: armada-xp: Change built target to include the SPL binary as bin_hdrStefan Roese2015-02-06-0/+4
| | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | kirkwood: sheevaplug: add FDT supportDrEagle2015-02-06-0/+5
| | | | | | | | | | | | | | | | | | | | | LIBFDT feature is required to support new kernels. Signed-off-by: Gérald Kerma <drEagle@doukki.net> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | kirkwood: sheevaplug: fix multiple definesDrEagle2015-02-06-1/+0
| | | | | | | | | | | | | | | Signed-off-by: Gérald Kerma <drEagle@doukki.net> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
| * | kirkwood: sheevaplug: fix styleDrEagle2015-02-06-0/+1
| |/ | | | | | | | | Signed-off-by: Gérald Kerma <drEagle@doukki.net> Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
* | ARM: UniPhier: leave the last element of boot_device_table emptyMasahiro Yamada2015-02-07-2/+2
| | | | | | | | | | | | | | | | Checking if the pointer is NULL would be easier to know the tail of the boot_device_table[] array. For clarification, add the /* sentinel */ comment. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: refactor pinmon commandMasahiro Yamada2015-02-07-12/+9
| | | | | | | | | | | | | | | | | | | | The return value of get_boot_mode_sel() is used as the index of the boot_device_table[] array. Its type should be "int" rather than "u32". Use only the iterator "i" for the loop in do_pinmon(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: enable I2C input pins for PH1-sLD8Masahiro Yamada2015-02-07-0/+9
| | | | | | | | | | | | | | To use I2C controllers on PH1-sLD8, the bit 10 (SCL0/SDA0) and bit 11 (SCL1/SDA1) of IECTRL register must be set. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: do not compile unnecessary objectsMasahiro Yamada2015-02-07-32/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | It is true that unused functions are removed from the ELF image by the compiler's garbage collection but relying on it too much does not look nice. Currently, the build is taking more than it should. Refactor the makefiles to compile only files that are really needed. CONFIG_SOC_INIT and CONFIG_DRAM_INIT are no longer needed by the optimization. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: remove unused checkboard() functionsMasahiro Yamada2015-02-07-51/+0
| | | | | | | | | | | | | | | | | | | | | | Since commit 0365ffcc0bd6 (generic-board: show model name in board_init_f() too), checkboard() is invoked only when show_board_info() fails to get the model name from Device Tree. It never happens because UniPhier SoCs now only work with CONFIG_OF_CONTROL and all the root nodes of UniPhier device trees have the "model" property. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: revive support card infoMasahiro Yamada2015-02-07-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | Since commit 0365ffcc0bd6 (generic-board: show model name in board_init_f() too), the support card information has not been displayed because check_support_card() is invoked only when show_board_info() fails to get the model name from Device Tree. This commit adds misc_init_f() function to call check_support_card() from there. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: move SPL init functions to spl_board_init()Masahiro Yamada2015-02-07-74/+48
| | | | | | | | | | | | | | | | Now init functions called from board_postclk_init() and dram_init() are only necessary for SPL. Move them to spl_board_init() for clean-up. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: move pin_init() to board_early_init_f()Masahiro Yamada2015-02-07-6/+27
| | | | | | | | | | | | | | Currently, I/O pin settings are not necessary for SPL. The board_early_init_f() seems a suitable place to call pin_init(). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: set I2C offset length of on-board EEPROM in DTSMasahiro Yamada2015-02-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The EEPROM chips on UniPhier reference daughter boards expect 2-byte offset address. Since 7132b9fd68a1 (dm: i2c: dts: Support an offset-len device tree property), I2C sub-nodes can have "u-boot,i2c-offset-len" property. It is convenient to set the default I2C offset address length in Device Tree, so that we do not have to set it on the command line. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: move EEPROM device node into a separate DTSMasahiro Yamada2015-02-07-20/+23
| | | | | | | | | | | | | | | | | | This EEPROM chip is installed on the expansion board commonly used on UniPhier platform. To avoid duplicated description, move the EEPROM node to a separate file and include it from other device tree sources. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | MAINTAINERS: claim maintainership of files with "uniphier" patternMasahiro Yamada2015-02-07-1/+1
| | | | | | | | | | | | | | | | | | | | The pattern "N: uniphier" can cover - drivers/serial/serial_uniphier.c - drivers/i2c/i2c-uniphier.c - drivers/i2c/i2c-uniphier-f.c - arch/arm/dts/uniphier-* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: add a simple README file for UniPhier platformMasahiro Yamada2015-02-07-0/+85
| | | | | | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: add environment variable to update images in NANDMasahiro Yamada2015-02-07-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To boot UniPhier boards with the NAND boot mode, two images (u-boot-spl.bin and u-boot-dtb.img) must be written at the correct offset addresses. TFTP downloading is useful to update such images in the NAND device. We generally do: => nand erase 0 0x100000 => tftpboot u-boot-spl.bin => nand write $loadaddr 0 0x10000 => tftpboot u-boot-dtb.img => nand write $loadaddr 0x10000 0xf0000 It is a tedious and error-prone operation. This commit provides the shorthand: => run nandupdate Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: use "&&" instead of "; " in commandsMasahiro Yamada2015-02-07-5/+5
| | | | | | | | | | | | Run the next command only when the previous one succeeded. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | ARM: UniPhier: remove dummy gpio.hMasahiro Yamada2015-02-07-6/+0
|/ | | | | | | | | | This dummy header was introduced by commit 630bf80ebb34 (ARM: UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL). Thanks to commit a08d643dbd85 (dm: Drop gpio.h header from fdtdec.c), such an ugly workaround is no longer needed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Merge branch 'master' of git://git.denx.de/u-boot-ubiTom Rini2015-02-04-25/+1254
|\
| * ubifs: Enable journal replay during mountAnton Habegger2015-01-29-14/+978
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable ubifs_replay_journal during mount_ubifs, which was disabled before. This commit fix an issue with unrecoverable ubifs volumes after power cut. Therefor the gc.c is imported now from 1860e37 Linux 3.15 hs: added SPDX-License-Identifier for fs/ubifs/gc.c Signed-off-by: Anton Habegger <anton.habegger@gmail.com>
| * ubifs: Import atomic_long operations from LinuxAnton Habegger2015-01-28-11/+268
| | | | | | | | | | | | | | | | | | | | This commit is a preperation for a subsequent UBIFS commit which needs atomic_long operations. Therefor "include/asm-generic/atomic-long.h" is imported from 1860e37 Linux 3.15 Signed-off-by: Anton Habegger <anton.habegger@gmail.com>
| * ubi: reset mtd_devs when ubi part failHeiko Schocher2015-01-28-0/+8
| | | | | | | | | | | | | | if "ubi part" fails, reset also mtd_devs to 0, as further "ubi part" would use wrong mtd_devs. Signed-off-by: Heiko Schocher <hs@denx.de>
* | Prepare v2015.04-rc1Tom Rini2015-02-02-2/+2
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-02-02-72/+252
|\ \
generated by cgit v1.1 at 2024-11-30 21:25:12 +0000