summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* OMAP5: I2C: Add I2C4 and I2C5 basesLubomir Popov2013-05-10-0/+2
| | | | | | | | I2C4 and I2C5 are utilized on all known OMAP5 hardware platforms. The I2C4 and I2C5 base addresses were however not defined; do this here. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>
* OMAP5: I2C: Enable i2c5 clocksLubomir Popov2013-05-10-0/+1
| | | | | | | I2C4 and I2C5 are utilized on all known OMAP5 hardware platforms. The i2c5 clock was however not enabled; do this here. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com>
* palmas: add header guardNishanth Menon2013-05-10-0/+4
| | | | | | | Add an header guard to common header file to prevent multiple includes messing things up. Signed-off-by: Nishanth Menon <nm@ti.com>
* palmas: use palmas_i2c_[read|write]_u8Nishanth Menon2013-05-10-26/+16
| | | | | | | | | | | | | | | | | commit 21144298 (power: twl6035: add palmas PMIC support) introduced twl6035_i2c_[read|write]_u8 Then, commit dd23e59d (omap5: pbias ldo9 turn on) introduced palmas_[read|write]_u8 for precisely the same access function. TWL6035 belongs to the palmas family, so instead of having an twl6035 API, we could use an generic palmas API instead. To stay consistent with the function naming of twl4030,6030 accessors, we use palmas_i2c_[read|write]_u8 Cc: Balaji T K <balajitk@ti.com> Cc: Sricharan R <r.sricharan@ti.com> Reported-by: Ruchika Kharwar <ruchika@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* palmas: rename twl6035_mmc1_poweron_ldo with an palmas generic functionNishanth Menon2013-05-10-3/+3
| | | | | | | | Since TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs, rename twl6035_mmc1_poweron_ldo by a more generic palmas_mmc1_poweron_ldo function. Signed-off-by: Nishanth Menon <nm@ti.com>
* palmas: rename init_settings to an generic palmas initNishanth Menon2013-05-10-3/+3
| | | | | | | Since TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs, rename twl6035_init_settings with an more generic palmas_init_settings Signed-off-by: Nishanth Menon <nm@ti.com>
* twl6035: rename to palmasNishanth Menon2013-05-10-12/+12
| | | | | | | | | | | TPS659038/TWL6035/TWL6037 all belong to palmas family of TI PMICs Rename twl6035 to palmas to allow reuse across multiple current and future platforms As part of this change, change the CONFIG_TWL6035_POWER to CONFIG_PALMAS_POWER and update usage of header file accordingly. Signed-off-by: Nishanth Menon <nm@ti.com>
* twl6030: add header guardNishanth Menon2013-05-10-0/+5
| | | | | | | Add an header guard to common header file to prevent multiple includes messing things up. Signed-off-by: Nishanth Menon <nm@ti.com>
* twl6030: move twl6030 register access functions to common header fileNishanth Menon2013-05-10-11/+11
| | | | | | | | twl6030_i2c_[read|write]_u8 can be used else where to access multi-function device such as twl6030, so move the register access functions to the common twl6030.h header file. Signed-off-by: Nishanth Menon <nm@ti.com>
* twl6030: twl6030_i2c_[read|write]_u8 prototype consistentNishanth Menon2013-05-10-34/+34
| | | | | | | | | | | | | | | u-boot standard i2c register access prototype is i2c_read(addr, reg, 1, &buf, 1) i2c_reg_write(u8 addr, u8 reg, u8 val) twl6030_i2c_read_u8(u8 addr, u8 *val, u8 reg) twl6030_i2c_write_u8(u8 addr, u8 val, u8 reg) does not provide consistency, so switch the prototype to be consistent with rest of u-boot i2c operations: twl6030_i2c_read_u8(u8 addr, u8 reg, u8 *val) twl6030_i2c_write_u8(u8 addr, u8 reg, u8 val) Signed-off-by: Nishanth Menon <nm@ti.com>
* twl4030: make twl4030_i2c_read_u8 prototype consistentNishanth Menon2013-05-10-14/+14
| | | | | | | | | | | | u-boot standard i2c read prototype is i2c_read(addr, reg, 1, &buf, 1) twl4030_i2c_read_u8(u8 addr, u8 *val, u8 reg) does not provide consistency, so switch the prototype to be consistent with rest of u-boot i2c operations: twl4030_i2c_read_u8(u8 addr, u8 reg, u8 *val) Signed-off-by: Nishanth Menon <nm@ti.com>
* twl4030: make twl4030_i2c_write_u8 prototype consistentNishanth Menon2013-05-10-61/+62
| | | | | | | | | | | | u-boot standard i2c register write prototype is i2c_reg_write(u8 addr, u8 reg, u8 val) twl4030_i2c_write_u8(u8 addr, u8 val, u8 reg) does not provide consistency, so switch the prototype to be consistent with rest of u-boot i2c operations: twl4030_i2c_write_u8(u8 addr, u8 reg, u8 val) Signed-off-by: Nishanth Menon <nm@ti.com>
* ti814x_evm: enable CPSW supportMatt Porter2013-05-10-0/+129
| | | | | | | | Adds CPSW support to the TI814X EVM configured with an ET1011C PHY in GMII mode. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* phy: add support for ET1011C physMatt Porter2013-05-10-0/+115
| | | | | | | | | | | | Adds an ET1011C PHY driver which is derived from the Linux kernel PHY driver (drivers/net/phy/et1011c.c) from the v3.9-rc2 tag. Note that an errata workaround config option is implemented to allow for TX_CLK to be enabled even when gigabit mode is negotiated. This workaround is used on the PG1.0 TI814X EVM. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* cpsw: add support for TI814x slave_regs differencesMatt Porter2013-05-10-0/+6
| | | | | | | | TI814x's version 1 CPSW has a different slave_regs layout. Add support for the differing registers. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* am33xx: add pll and clock support for TI814x CPSWMatt Porter2013-05-10-2/+105
| | | | | | | Enables required PLLs and clocks for CPSW on TI814x. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* i2c: zynq: Add support for Xilinx ZynqMichal Simek2013-04-30-0/+320
| | | | | | | | | Support Xilinx Zynq i2c controller. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@ti.com>
* mmc: Add support for Xilinx Zynq sdhci controllerMichal Simek2013-04-30-0/+79
| | | | | | | Add support for SD, MMC and eMMC card on Xilinx Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: gem: Add support for phy autodetectionMichal Simek2013-04-30-0/+51
| | | | | | | Autodetect phy if phyaddress is setup to -1. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: gem: Preserve clk on emio interfaceDavid Andrey2013-04-30-6/+12
| | | | | | | | | | | Avoid overwriting GEMx_RCLK_CTRL and GEMx_CLK_CTRL if the Ethernet interface is connect on EMIO Do not enable emio for this standard board configuration for now. Signed-off-by: David Andrey <david.andrey@netmodule.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: gem: Pass phy address to initDavid Andrey2013-04-30-9/+8
| | | | | | | | | Pass the PHY address to the driver init to allow parallel use of both interfaces Signed-off-by: David Andrey <david.andrey@netmodule.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* zynq: Move macros to hardware.hMichal Simek2013-04-30-4/+12
| | | | | | | | Add all fixed addresses to hardware.h and change petalinux configuration to support this. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: gem: Fix gem driver on 1Gbps LANMichal Simek2013-04-30-16/+71
| | | | | | | | | | The whole driver used 100Mbps because of zc702 rev B. Fix problem with not setup proper clock for gem1. This is generic approach for clk setup. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: gem: Do not initialize BDs againMichal Simek2013-04-30-39/+47
| | | | | | | | | | | BDs can be correctly setup just once and init function performs only phy autodetection and enabling RX/TX. RX/TX are disabled in halt function. This patch solves the problem with repeatable tftp transfers. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: gem: Simplify return path in zynq_gem_recvMichal Simek2013-04-30-3/+1
| | | | | | | Remove one return from the code. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: gem: Remove WRAP bit from TX buffer descriptionMichal Simek2013-04-30-2/+1
| | | | | | | | | | | | Removing this bit causes that frame is sent only once. (With wrap big one packet has been sent several times which dramatically decrease throughput) TRM: (Table 16-3: Tx Buffer Descriptor Entry) Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* net: phy: Define Marvell 88e1518 phyMichal Simek2013-04-30-0/+11
| | | | | | | | This phy is used on zedboard (xilinx zynq platform). Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* zynq: Move scutimer baseaddr to hardware.hMichal Simek2013-04-30-4/+3
| | | | | | | | Move baseaddr to hardware.h to be shared between configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* arm: zynq: Rename XPSS_ prefix to ZYNQ_ for hardcoded SoC addressesMichal Simek2013-04-30-6/+6
| | | | | | | | XPSS prefix was used in past and it is obsolete for quite some time. Let's use correct SoC name which is Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* arm: zynq: U-Boot udelay < 1000 FIXDavid Andrey2013-04-30-9/+37
| | | | | | | | | Rework the __udelay function of U-Boot Zynq Arch to handle delay < 1000 usec Signed-off-by: David Andrey <david.andrey@netmodule.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
* Prepare v2013.04Tom Rini2013-04-19-1/+1
| | | | Signed-off-by: Tom Rini <trini@ti.com>
* crc32: Correct endianness of crc32 resultSimon Glass2013-04-19-1/+4
| | | | | | | | | | | | | | | | | | | When crc32 is handled by the hash library, it requires the data to be in big-endian format, since it reads it byte-wise. Thus at present the 'crc32' command reports incorrect data. For example, previously we might see: Peach # crc32 40000000 100 CRC32 for 40000000 ... 400000ff ==> 0d968558 but instead with the hash library we see: Peach # crc32 40000000 100 CRC32 for 40000000 ... 400000ff ==> 5885960d Correct this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@google.com>
* patman: fix gitutil for decorationsAndreas Bießmann2013-04-18-4/+7
| | | | | | | | | The git config parameter log.decorate is quite useful when working with git. Patman, however can not handle the decorated output when parsing the commit. To prevent this use the '--no-decorate' switch for git-log. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-arm into HEADTom Rini2013-04-18-92/+467
|\ | | | | | | | | | | | | | | | | | | Quick manual fixup to merge the USB boot related defines and TPM related defines. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
| * exynos: fdt: Add TMU node for snowSimon Glass2013-04-17-0/+14
| | | | | | | | | | | | | | | | Snow is missing a TMU node, and with TMU support this is not allowed, so it fails to boot. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: Correct use of 64-bit divisionSimon Glass2013-04-17-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The current code is causing errors like this on my toolchains: /usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/binutils-bin/2.22/ ld.bfd.real: failed to merge target specific data of file /usr/lib/gcc/ armv7a-cros-linux-gnueabi/4.7.x-google/libgcc.a(_divdi3.o) Use do_div() to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5: Add support for USB download boot modeVivek Gautam2013-04-17-2/+43
| | | | | | | | | | | | | | | | | | | | | | | | Exynos5250 supports secondary USB device boot mode. If the iROM fails to download u-boot from the primary boot device (such as SD or eMMC), it will try to retrieve from the secondary boot device (such as USB). Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Tegra: T30: Beaver board support.Tom Warren2013-04-15-0/+149
| | | | | | | | | | | | | | | | Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu. Add a Beaver build so it can begin to be differentiated, if need be. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Split tegra_get_chip_type() into soc & sku funcsTom Warren2013-04-15-37/+84
| | | | | | | | | | | | | | | | | | | | | | As suggested by Stephen Warren, use tegra_get_chip() to return the pure CHIPID for a Tegra SoC (i.e. 0x20 for Tegra20, 0x30 for Tegra30, etc.) and rename tegra_get_chip_type() to reflect its true function, i.e. tegra_get_chip_sku(), which returns an ID like TEGRA_SOC_T25, TEGRA_SOC_T33, etc. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Fix MSELECT clock divisors for T30/T114.Tom Warren2013-04-15-8/+6
| | | | | | | | | | | | | | | | | | A comparison of registers between our internal NV U-Boot and u-boot-tegra/next showed some discrepancies in the MSELECT clock divisor programming. T20 doesn't have a MSELECT clk src reg. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra114: Initialize System Counter (TSC) with osc frequencyTom Warren2013-04-15-0/+72
| | | | | | | | | | | | | | | | | | T114 needs the SYSCTR0 counter initialized so the TSC can be read by the kernel. Do it in the bootloader since it's a write-once deal (secure/non-secure mode dependent). Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Configure L2 cache control reg properly.Tom Warren2013-04-15-8/+52
| | | | | | | | | | | | | | | | | | | | Without this change, kernel fails at calling function cache_clean_flush during kernel early boot. Aprocryphally, intended for T114 only, so I check for a T114 SoC. Works (i.e. dalmore 3.8 kernel now starts printing to console). Signed-off-by: Tom Warren <twarren@nvidia.com>
| * Tegra: TEC: Enable boot script supportThierry Reding2013-04-15-7/+3
| | | | | | | | | | | | | | | | | | | | Boot script support brings TEC in line with other Tegra boards. To enable booting a Linux kernel with initial ramdisk, also include support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Plutux: Enable NAND and boot script supportThierry Reding2013-04-15-7/+11
| | | | | | | | | | | | | | | | | | | | Boot script support brings Plutux in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Medcom-Wide: Enable NAND and boot script supportThierry Reding2013-04-15-9/+12
| | | | | | | | | | | | | | | | | | | | Boot script support brings Medcom-Wide in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: All Tamonten-derived boards use onboard NANDThierry Reding2013-04-15-11/+11
| | | | | | | | | | | | | | | | | | Move the nand-controller node to the tegra20-tamonten.dtsi so that it can be shared between all derived boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Restore cp15 VBAR _start vector write for ARMv7Tom Warren2013-04-15-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | A start vector fix was added by AneeshV for OMAP4 (commit 0d479b53), and caused the old monilithic Tegra builds to hang due to an undefined instruction trap. Previously, the code needed to run on both the AVP (ARM7TDI) and A9, and the AVP doesn't have a CP15 register. I corrected this in commit 6d6c0bae w/#ifndef CONFIG_TEGRA, but now that we use SPL, and boot the AVP w/o any ARMv7 code, I can revert my change, and make Aneesh's change apply to Tegra. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * Tegra: enable verify support for the crc32 commandTom Warren2013-04-15-0/+2
| | | | | | | | | | | | | | Some 3rd-party flash tools use the -v (verify) option of crc32 command. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
| * ARM: tegra: support T33 SKU of Tegra30Stephen Warren2013-04-15-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make U-Boot aware of the T33 SKU of Tegra30, and treat it identically to any other Tegra30. An alternative would be to simply remove the SKU checking from tegra_get_chip_type(); most use of the value most likely simply wants to know the current chip, not the specific SKU. Or, the function could be split into separate tegra_get_chip() and tegra_get_sku() for the cases where differentiation really is required. I wonder whether tegra_get_chip_type() should printf() whenever any unkown chip/SKU is found, although perhaps the function is called so early that the printf() wouldn't actually make it to the UART anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | fdt: Ensure that libfdt_env.h comes from U-BootSimon Glass2013-04-17-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building host utilities, we include libfdt.h from the host, not from U-Boot. This in turn brings in libfdt_env.h from the host, which can mess up the types and cause a build failure, depending on the host environment. To fix this, force inclusion of U-Boot's libfdt_env.h so that the types are correct. Another way to fix this is to use -nostdinc and -idirafter to ensure that system includes are included after U-Boot ones. Unfortunately this means that U-Boot's errno.h gets included instead of the system one. This in turn requires a hack to errno.h to redirect things, so all in all the solution in this patch is probably cleaner. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-09-19 23:25:08 +0000