summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* mpc5200: a3m071/a4m2k: Miscellaneous updates and fixesStefan Roese2013-05-02-31/+82
| | | | | | | | | | | | | | | The changes to a3m071/a4m2k in summary are: - Enable CAN1 on I2C in GPS Port Configuration - Enable SPI on PSC2 - Activate network console - New flash partitioning - Fix some typos - Pass host name to Linux - Change rootfs to squashfs,jffs2 - Enable UBI/UBIFS support - Enable FIT support Signed-off-by: Stefan Roese <sr@denx.de>
* mpc5200: a3m071/a4m2k: Fix problem with increased global_data structStefan Roese2013-05-02-3/+1
| | | | | | | | | | | | | | | | | | | | The v2013.04 release has this patch set included: 5cb48582 "Add architecture-specific global data" With this, the global_data struct is now common and new variables have been added. Resulting in a bigger struct. Unfortunately the currently allocated 128 bytes are just a bit too small for this new struct. This patch now uses the automatically generated struct size instead to not run into this problem again. Please note that this problem might hit some other platforms which currently reserve a tight space of 128 bytes for the global_data struct! Signed-off-by: Stefan Roese <sr@denx.de>
* mpc5200: a3m071/a4m2k: Enable flash verify optionStefan Roese2013-05-02-0/+1
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* mpc512x: remove dead codeAnatolij Gustschin2013-05-02-9/+0
| | | | | | | The prt_mpc512x_clks() function isn't referenced anywhere and its prototype is wrong. Remove it. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FITSimon Glass2013-05-01-0/+2
| | | | | | Enable these options to use FITs on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: fs: Add support for saving files to host filesystemSimon Glass2013-05-01-4/+49
| | | | | | | | | | | | This allows write of files from the host filesystem in sandbox. There is currently no concept of overwriting the file and removing its existing contents - all writing is done on top of what is there. This means that writing 10 bytes to the start of a 1KB file will only update those 10 bytes, not truncate the file to 10 byte slong. If the file does not exist it is created. Signed-off-by: Simon Glass <sjg@chromium.org>
* fs: Add support for saving data to filesystemsSimon Glass2013-05-01-0/+76
| | | | | | | Add a new method for saving that filesystems can implement. This mirrors the existing load method. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Support 'source' commandSimon Glass2013-05-01-4/+7
| | | | | | | Enhance the source command to work with sandbox, by using map_sysmem() to convert a ulong address into a pointer. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Allow -c argument to provide a command listSimon Glass2013-05-01-1/+1
| | | | | | | | This allows passing of entire scripts to sandbox with the -c argument, which is useful for testing. Commands can be delimited with a newline or semicolon. Signed-off-by: Simon Glass <sjg@chromium.org>
* Revert "fdt- Tell the FDT library where the device tree is"Simon Glass2013-05-01-8/+0
| | | | | | | | | | This reverts commit 3b73459ea3421e9f8c6c8c62e1d3fe458ca5bc56. In practice it doesn't seem like a good idea to make the the working FDT point to the control FDT. Now that we can access the control FDT using the 'fdt' command, there is no need for this feature. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Skip checking FDT if the pointer is NULLSimon Glass2013-05-01-1/+2
| | | | | | | If we have no FDT, don't attempt to read from it. This allows sandbox to run without an FDT if required. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: fdt: Support fdt command for sandboxSimon Glass2013-05-01-3/+7
| | | | | | | By using map_sysmem() we can get the fdt command to work correctly with sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Allow fdt command to check and update control FDTSimon Glass2013-05-01-13/+34
| | | | | | | There is an existing fdt command to deal with the working FDT. Enhance this to support the control FDT also (CONFIG_OF_CONTROL). Signed-off-by: Simon Glass <sjg@chromium.org>
* Add getenv_hex() to return an environment variable as hexSimon Glass2013-05-01-0/+28
| | | | | | | | This conversion is required in a number of places in U-Boot. Add a standard function to provide this feature, so we avoid all the different variations in the way it is coded. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Add a parameter to fdt_valid()Simon Glass2013-05-01-18/+20
| | | | | | | At present this only checks working_fdt, but we want to check other FDTs also. So add the FDT to check as a parameter to fdt_valid(). Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host fileSimon Glass2013-05-01-1/+70
| | | | | | | | | | | | With sandbox it is tricky to add an FDT to the image at build time (or later) since we build an ELF file, not a plain binary, and the address space of the whole U-Boot is not accessible in the emulated memory map of sandbox. Sandbox can read files directly from the host, though, so add an option to read an FDT from a host file on start-up. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Switch over to generic boardSimon Glass2013-05-01-324/+66
| | | | | | | | | Add generic board support for sandbox. and remove the old board init code. Select CONFIG_SYS_GENERIC_BOARD for sandbox now that this is supported. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
* sandbox: Provide a way to map from host RAM to U-Boot RAMSimon Glass2013-05-01-0/+13
| | | | | | | | | | | | | | | | | | | | | In many cases, pointers to memory are passed around, and these pointers refer to U-Boot memory, not host memory. This in itself is not a problem. However, in a few places, we cast that pointer back to a ulong (being a U-Boot memory address). It is possible to convert many of these cases to avoid this. However there are data structures (e.g. struct bootm_headers) which use pointers. We could with a lot of effort adjust the structs and all code that uses them to use ulong instead of pointers. This seems like an unacceptable cost, since our objective with sandbox is to minimise the impact on U-Boot code while maximising the features available to sandbox. Therefore, create a map_to_sysmem() function which converts from a pointer to a U-Boot address. This can be used sparingly when needed. Signed-off-by: Simon Glass <sjg@chromium.org>
* Trigger generic board error only when buildingSimon Glass2013-05-01-2/+12
| | | | | | | | | | | | | | | | At present the generic board error can occur when configuring U-Boot, or during distclean, but this is incorrect. The existing autoconf.mk may come from an earlier U-Boot configuration which is about to be overwritten. Make the error conditional so that it will only be triggered when we are actually building U-Boot. This avoids a problem where the system is being reconfigured to remove CONFIG_SYS_GENERIC_BOARD on an architecture that does not support it. Currently this will print an error and require the manual removal of include/autoconf.mk. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-05-01-0/+2
|\
| * post: fix I2C POST failure for devices in CONFIG_SYS_POST_I2C_IGNORESAnatolij Gustschin2013-05-01-0/+2
| | | | | | | | | | | | | | | | | | | | | | Devices in CONFIG_SYS_POST_I2C_IGNORES list may be absent and the rule is not to report I2C POST failure for devices in this list. Currently this doesn't work since probing for these devices isn't done and thus they are not marked as successfully probed. Ignore optional devices when checking for devices that didn't respond. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge branch 'microblaze' of git://www.denx.de/git/u-boot-microblazeTom Rini2013-05-01-4/+126
|\ \ | |/ |/|
| * watchdog: Add support for Xilinx Microblaze watchdogMichal Simek2013-04-30-0/+114
| | | | | | | | | | | | | | Watchdog can be used on Microblaze, PPC and Zynq hw designs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
| * microblaze: Disable all cpu features before resetMichal Simek2013-04-30-1/+2
| | | | | | | | | | | | | | | | | | | | Fix microblaze soft reset function and disable all cpu features. Especially disable caches because IRQs were off by disable_interrupts(). Reported-by: John Williams <john.williams@xilinx.com> Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * microblaze: Enable netconsoleMichal Simek2013-04-30-1/+8
| | | | | | | | | | | | | | | | Setup environment and enable netconsole. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@ti.com>
| * microblaze: Fix reset functionMichal Simek2013-04-30-2/+2
| | | | | | | | | | | | | | | | | | | | Remove CONFIG_SYS_RESET_ADDRESS macro. It was there from historical point of view when soft reset was just jump to u-boot text start (not used right now). Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | git-mailrc: Add trini shortcutMichal Simek2013-04-29-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | This is a MIME GnuPG-signed message. If you see this text, it means that your E-mail or Usenet software does not support MIME signed messages. The Internet standard for MIME PGP messages, RFC 2015, was published in 1996. To open this message correctly you will need to install E-mail or Usenet software that supports modern Internet standards. Easier for using with patman. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flashTom Rini2013-04-22-0/+20
|\ \
| * | flash: Add optional verify-after-write featureStefan Roese2013-04-22-0/+20
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Sometimes it might make sense to verify the written data to NOR flash. This patch adds this feature. To enable this verify-after-write, you need to define CONFIG_FLASH_VERIFY in your board config header. Please note that this option is useless in nearly all cases, since such flash programming errors usually are detected earlier while unprotecting/erasing/programming. Please only enable this option if you really know what you are doing. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxTom Rini2013-04-22-10/+343
|\ \
| * | ppc4xx: Add lcd4_lwmon5 supportStefan Roese2013-04-22-6/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the fast booting LWMON5 derivat "lcd4_lwmon5". Its a stripped down version of the full blown lwmon5 support, without ECC, USB, POST and some other stuff. It used the newly introduced SPL infrastrucure for SPL from NOR flash booting on the PPC4xx. By setting the environment variable "boot_os" to "yes", Linux will be started from the SPL version. If not, the "normal" U-Boot will be started. Signed-off-by: Stefan Roese <sr@denx.de>
| * | Makefile: Add target for combined u-boot.img & spl/u-boot.binStefan Roese2013-04-22-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new make target "u-boot-img-spl-at-end.bin" consists of the the real, full-blown U-Boot image and the U-Boot SPL binary directly attached to it. The full-blown U-Boot image has the mkimage header included, with its load-address and entry-point. This will be used by the upcoming lwmon5 PPC440EPx derivate board port. Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Add SPL supportStefan Roese2013-04-22-4/+185
| |/ | | | | | | | | | | | | | | | | | | This patch adds SPL booting support (NOR flash) for the PPC4xx platforms. This SPL booting (Falcon mode) will be used by the upcoming lcd4_lwmon5 board port (lwmon5 variant). Signed-off-by: Stefan Roese <sr@denx.de>
* | feature-removal-schedule.txt: Add CONFIG_SYS_MTEST_START/ENDTom Rini2013-04-19-0/+12
| | | | | | | | | | | | | | With 'mtest' no longer a default command, we will have unused defines which should be removed for the v2013.10 release. Signed-off-by: Tom Rini <trini@ti.com>
* | config_cmd_default.h: Remove CONFIG_CMD_MEMTESTTom Rini2013-04-19-18/+0
|/ | | | | | | As per doc/feature-removal-schedule.txt, remove CONFIG_CMD_MEMTEST from default list of commands. Signed-off-by: Tom Rini <trini@ti.com>
* Prepare v2013.04Tom Rini2013-04-19-1/+1
| | | | Signed-off-by: Tom Rini <trini@ti.com>
* crc32: Correct endianness of crc32 resultSimon Glass2013-04-19-1/+4
| | | | | | | | | | | | | | | | | | | When crc32 is handled by the hash library, it requires the data to be in big-endian format, since it reads it byte-wise. Thus at present the 'crc32' command reports incorrect data. For example, previously we might see: Peach # crc32 40000000 100 CRC32 for 40000000 ... 400000ff ==> 0d968558 but instead with the hash library we see: Peach # crc32 40000000 100 CRC32 for 40000000 ... 400000ff ==> 5885960d Correct this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vadim Bendebury <vbendeb@google.com>
* patman: fix gitutil for decorationsAndreas Bießmann2013-04-18-4/+7
| | | | | | | | | The git config parameter log.decorate is quite useful when working with git. Patman, however can not handle the decorated output when parsing the commit. To prevent this use the '--no-decorate' switch for git-log. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-arm into HEADTom Rini2013-04-18-92/+467
|\ | | | | | | | | | | | | | | | | | | Quick manual fixup to merge the USB boot related defines and TPM related defines. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
| * exynos: fdt: Add TMU node for snowSimon Glass2013-04-17-0/+14
| | | | | | | | | | | | | | | | Snow is missing a TMU node, and with TMU support this is not allowed, so it fails to boot. Add it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * exynos: Correct use of 64-bit divisionSimon Glass2013-04-17-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | The current code is causing errors like this on my toolchains: /usr/x86_64-pc-linux-gnu/armv7a-cros-linux-gnueabi/binutils-bin/2.22/ ld.bfd.real: failed to merge target specific data of file /usr/lib/gcc/ armv7a-cros-linux-gnueabi/4.7.x-google/libgcc.a(_divdi3.o) Use do_div() to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5: Add support for USB download boot modeVivek Gautam2013-04-17-2/+43
| | | | | | | | | | | | | | | | | | | | | | | | Exynos5250 supports secondary USB device boot mode. If the iROM fails to download u-boot from the primary boot device (such as SD or eMMC), it will try to retrieve from the secondary boot device (such as USB). Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Tegra: T30: Beaver board support.Tom Warren2013-04-15-0/+149
| | | | | | | | | | | | | | | | Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu. Add a Beaver build so it can begin to be differentiated, if need be. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Split tegra_get_chip_type() into soc & sku funcsTom Warren2013-04-15-37/+84
| | | | | | | | | | | | | | | | | | | | | | As suggested by Stephen Warren, use tegra_get_chip() to return the pure CHIPID for a Tegra SoC (i.e. 0x20 for Tegra20, 0x30 for Tegra30, etc.) and rename tegra_get_chip_type() to reflect its true function, i.e. tegra_get_chip_sku(), which returns an ID like TEGRA_SOC_T25, TEGRA_SOC_T33, etc. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Fix MSELECT clock divisors for T30/T114.Tom Warren2013-04-15-8/+6
| | | | | | | | | | | | | | | | | | A comparison of registers between our internal NV U-Boot and u-boot-tegra/next showed some discrepancies in the MSELECT clock divisor programming. T20 doesn't have a MSELECT clk src reg. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra114: Initialize System Counter (TSC) with osc frequencyTom Warren2013-04-15-0/+72
| | | | | | | | | | | | | | | | | | T114 needs the SYSCTR0 counter initialized so the TSC can be read by the kernel. Do it in the bootloader since it's a write-once deal (secure/non-secure mode dependent). Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Configure L2 cache control reg properly.Tom Warren2013-04-15-8/+52
| | | | | | | | | | | | | | | | | | | | Without this change, kernel fails at calling function cache_clean_flush during kernel early boot. Aprocryphally, intended for T114 only, so I check for a T114 SoC. Works (i.e. dalmore 3.8 kernel now starts printing to console). Signed-off-by: Tom Warren <twarren@nvidia.com>
| * Tegra: TEC: Enable boot script supportThierry Reding2013-04-15-7/+3
| | | | | | | | | | | | | | | | | | | | Boot script support brings TEC in line with other Tegra boards. To enable booting a Linux kernel with initial ramdisk, also include support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Plutux: Enable NAND and boot script supportThierry Reding2013-04-15-7/+11
| | | | | | | | | | | | | | | | | | | | Boot script support brings Plutux in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * Tegra: Medcom-Wide: Enable NAND and boot script supportThierry Reding2013-04-15-9/+12
| | | | | | | | | | | | | | | | | | | | Boot script support brings Medcom-Wide in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
generated by cgit v1.1 at 2024-11-09 19:56:42 +0000