summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* DWMMC: SMDK5420: Disable SMU for eMMCRajeshwari Shinde2013-10-31-0/+30
| | | | | | | | | | | | SMDK5420 has a new Security Management Unit added for dwmmc driver, hence, configuring the control registers to support booting via eMMC. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: sdhci: Avoid commands errors by simple timeout adaptation.Przemyslaw Marczak2013-10-31-7/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | Old command timeout value was too small and it caused I/O errors which led to uncompleted read/write/erase operations and filesystem errors. Timeout adaptation fixes this issue. Changes in sdhci_send_command() function: - change timeout variable to static - increase default command timeout to 100 ms - add definition of max command timeout value, which can be redefined in each board config file - wait for card ready state for max defined time if it doesn't exceed defined maximum or return COMM_ERR Once successfully increased timeout value will be used in next function call. This fix was tested on Goni, Trats, Trats2 boards by testing UMS on MMC storage. Changes v2: - move global variable cmd_timeout into function sdhci_send_command() - change condition "==" to ">=" when comparing time with timeout - print information about timeout increasing and card busy timeout Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: dw_mmc: change the callback function name.Jaehoon Chung2013-10-31-5/+5
| | | | | | | | To prevent the confusion, use the get_mmc_clk() instead of mmc_clk(). get_mmc_clk() is more exactly name. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* mmc: Fix erase_grp_size for partitioned cardOliver Metz2013-10-31-4/+15
| | | | | | | | EXT_CSD_ERASE_GROUP_DEF is lost every time after a reset or power off. Set it if device has enhanced partitions. Signed-off-by: Oliver Metz <oliver@freetz.org> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2013-10-30-22/+35
|\
| * video, formike: change tag/val writeHeiko Schocher2013-10-30-3/+4
| | | | | | | | | | | | | | | | | | | | write first the "tag" 8 bit value and then the "val" 8-bit to the display. Tested on the rut board. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
| * video, cfb_console: make background and foreground color configurableHeiko Schocher2013-10-30-18/+30
| | | | | | | | | | | | | | | | make CONSOLE_BG_COL/CONSOLE_FG_COL configurable through board config file. Clear video screen in video_init(). Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Anatolij Gustschin <agust@denx.de>
| * video: ipu_disp: Fix clock polarity logicFabio Estevam2013-10-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the HDMI splash screen image quality on mx6solo does not show a very stable image. By comparing the IPU driver from U-boot with the one from FSL 4.1.0 BSP, we can see that there is an inverted logic for setting the DI_GEN_POL_CLK bit. >From FSL BSP [1] we have: if (!sig.clk_pol) di_gen |= DI_GEN_POLARITY_DISP_CLK; Applying the same logic into U-boot fixes the HDMI image stability. [1] git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/mxc/ipu3/ipu_disp.c?h=imx_3.0.35_4.1.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | mpc85xx: introduce the kmp204x reference design supportValentin Longchamp2013-10-24-0/+1208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the support for Keymile's kmp204x reference design. This design is based on Freescale's P2040/P2041 SoC. The peripherals used by this design are: - DDR3 RAM with SPD support - SPI NOR Flash as boot medium - NAND Flash - 2 PCIe busses (hosts 1 and 3) - 3 FMAN Ethernet devices (FMAN1 DTSEC1/2/5) - 3 Local Bus windows, with one dedicated to the QRIO reset/power mgmt FPGA - 2 HW I2C busses - last but not least, the mandatory serial port The board/keymile/kmp204x code is mostly based on Freescale's P2041rdb support and was changed according to our design (that means essentially removing what is not present on the designs and a few adaptations). There is currently only one prototype board that is based on this design and this patch also introduces it. The board is called kmlion1. Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> kmp204x: update the ENV #define The comments had to be refined as well as the total size Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> [York Sun: fix ddr.c] Acked-by: York Sun <yorksun@freescale.com>
* | fsl/mpc85xx: define common serdes_clock_to_string functionValentin Longchamp2013-10-24-74/+39
| | | | | | | | | | | | | | | | | | | | | | | | This allows to share some common code for the boards that use a corenet base SoC. Two different versions of the function are available in fsl_corenet_serdes.c and fsl_corenet2_serdes.c files. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> [York Sun: fix t1040qds.c] Acked-by: York Sun <yorksun@freescale.com>
* | mtd/fsl_elbc: take NAND_ECC_SOFT_BCH config option into accountValentin Longchamp2013-10-24-1/+5
| | | | | | | | | | | | | | | | NAND_ECC_SOFT was the only option available while the SOFT_BCH option may also be used. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Scott Wood <scottwood@freescale.com>
* | net/fman: add a fm_enable_port functionValentin Longchamp2013-10-24-0/+52
| | | | | | | | | | | | | | | | | | | | This can be useful if one wants to disable an interface in u-boot because u-boot should not manage it but then later reenable it for FDT fixing or if the kernel uses this interface. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> [York Sun: fix conflict in fm_eth.h] Acked-by: York Sun <yorksun@freescale.com>
* | mpc8xxx: set x2 DDR3 refresh rate if SPD config requires itValentin Longchamp2013-10-24-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the DDR3 module supports industrial temperature range and requires the x2 refresh rate for that temp range, the refresh period must be 3.9us instead of 7.8 us. This was successfuly tested on kmp204x board with some MT41K128M16 DDR3 RAM chips (no module used, chips directly soldered on board with an SPD EEPROM). Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> [York Sun: fix minor conflicts in fsl_ddr_dimm_params.h, lc_common_dimm_params.c, common_timing_params.h] Acked-by: York Sun <yorksun@freescale.com>
* | mpc8xxx: call i2c_set_bus_num in __get_spdValentin Longchamp2013-10-24-1/+5
| | | | | | | | | | | | This is necessary with the new I2C subystem that was introduced lately. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | KM: add CONFIG_KM_COMMON_ETH_INIT for km common eth initValentin Longchamp2013-10-24-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | This must be defined by a board support file that want to use the keymile common.c board_eth_init function that requires ethernet_present to be defined. Currently all the km architectures use it but the kmp204x architecture later supported in this series does use another board_eth_init function and thus does not define it. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | KM: define CONFIG_SYS_I2C_INIT_BOARD only for concerned boardValentin Longchamp2013-10-24-30/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This must be defined for all the keymile boards that use the common i2c_abort function that is used to "reset" the I2C bus. These are currently km82xx and km_arm boards. The km83xx boards use other functions and thus do not need this. This patch removes the CONFIG_SYS_I2C_INIT_BOARD from keymile-common.h and defines it for km_arm.h and km82xx.h. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | KM: fix typo in default environmentValentin Longchamp2013-10-24-1/+1
| | | | | | | | | | | | | | The ip kernel parameter had a typo in it (we've been lucky that it has worked until now). Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | km-powerpc: move SYS_MALLOC_LEN out of keymile-common.hValentin Longchamp2013-10-24-2/+6
| | | | | | | | | | | | | | It must be set to a different value for the later add kmp204x architecture, because we are restricted to 1MB SRAM. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | powerpc: cast bi_memsize to ulong for %ld usageValentin Longchamp2013-10-24-1/+1
| | | | | | | | | | | | | | | | | | | | When exporting the new memsize without reserved PRAM area, the -Wformat option produces a warning since %ld is used for snprintf and bi_memsize is phys_size_t. This patch removes this warning for all PRAM PowerPC boards. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | powerpc/usb:Differentiate USB controller base addressramneek mehresh2013-10-24-21/+46
| | | | | | | | | | | | | | | | Introduce different macros for storing addresses of multiple USB controllers. This is required for successful initialization and usage of multiple USB controllers inside u-boot Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
* | powerpc/usb:Define CONFIG_USB_MAX_CONTROLLER_COUNT for all 85xx socsramneek mehresh2013-10-24-3/+29
| | | | | | | | | | | | | | | | CONFIG_USB_MAX_CONTROLLER_COUNT macro recently defined for initializing all USB controllers on a given platform. This macro is defined for all 85xx socs Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
* | powerpc/c29xpcie: add DDR ECC on off config settingPo Liu2013-10-24-0/+10
|/ | | | | | | | | | c29xpcie REV_A board DDR ECC chip has bad impedance in hardware, force that kind of board to be DDR ECC off when booting. Other version board config ECC on/off by hwconfig=fsl_ddr:ecc=on in uboot enviroment. Signed-off-by: Po Liu <Po.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
* usb: rename board_usb_init_type to usb_init_typeTroy Kisky2013-10-22-3/+3
| | | | | | | | | commit bba679144d25b91bcd7befff5a96728a30875f54 "usb: rename board_usb_init_type to usb_init_type" missed xhci-omap.c So, fix that patch here, and fix a checkpatch warning. WARNING: Avoid unnecessary line continuations Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* arm: rmobile: armadillo-800eva: Change clock definition of SCIF and TMUNobuhiro Iwamatsu2013-10-22-0/+2
| | | | | | | | | | This changes clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ, and clock definition of TMU from CONFIG_SYS_CLK_FREQ to CONFIG_SH_TMU_CLK_FREQ, Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
* arm: rmobile: kzm9g: Change clock definition of SCIF from ↵Nobuhiro Iwamatsu2013-10-22-0/+1
| | | | | | | | CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
* Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2013-10-22-12/+67
|\
| * serial: sh: Add support R8A7791Nobuhiro Iwamatsu2013-10-17-4/+4
| | | | | | | | | | | | This adds the preset value to register for R8A7791. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * serial: sh: Add support R8A7790Nobuhiro Iwamatsu2013-10-17-0/+14
| | | | | | | | | | | | | | This adds the preset value to register, and setup of baudrate. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * sh: boards: Change clock definition of SCIF and TMUNobuhiro Iwamatsu2013-10-17-0/+40
| | | | | | | | | | | | | | | | | | | | This changes clock definition of SCIF from CONFIG_SYS_CLK_FREQ to CONFIG_SH_SCIF_CLK_FREQ, and clock definition of TMU from CONFIG_SYS_CLK_FREQ to CONFIG_SH_TMU_CLK_FREQ for boards. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
| * serial: sh: Change definition of clock of SCIFNobuhiro Iwamatsu2013-10-17-1/+3
| | | | | | | | | | | | | | | | | | | | | | The former SH/SCIF driver had calculated baudrate based on CONFIG_SYS_CLK_FREQ. The newest SH/SCIF needs calculation of the clock for SCIF. This patch defines clock CONFIG_SH_SCIF_CLK_FREQ for SCIF and changes it to CONFIG_SH_SCIF_CLK_FREQ from CONFIG_SYS_CLK_FREQ. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
| * sh: timer: Change definition of clock of TMUNobuhiro Iwamatsu2013-10-17-1/+1
| | | | | | | | | | | | | | | | | | | | The former SH/TMU driver had calculated timer based on CONFIG_SYS_CLK_FREQ. The newest SH/TMU newly needs calculation of the clock for TMU. This patch defines clock CONFIG_SH_TMU_CLK_FREQ for TMU and changes it to CONFIG_SH_TMU_CLK_FREQ from CONFIG_SYS_CLK_FREQ. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: cache: Change cache API to defines as U-BootNobuhiro Iwamatsu2013-10-17-6/+3
| | | | | | | | | | | | | | | | | | A chache API of SH is developped by reference in linux kernel. And API was the same as the linux kernel. This patch change cache API to defines as U-Boot. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: timer: Remove static global variableNobuhiro Iwamatsu2013-10-17-4/+4
| | | | | | | | | | | | | | | | "static u16 bit" is not necessary to use this as static global variable. This patch fixes this. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * sh: timer: Mask bit of timer prescalerNobuhiro Iwamatsu2013-10-17-1/+3
| | | | | | | | | | | | | | | | | | timer_init function sets timer prescaler bit. The previous code so did not mask this bit, this function was to overwrite the bit. This will fix this problem. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2013-10-21-609/+7331
|\ \
| * | usb: udc: add udc.h include fileTroy Kisky2013-10-20-142/+68
| | | | | | | | | | | | | | | | | | | | | Move common definitions to udc.h This allows musb_udc.h to be removed as well. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: gadget: mv_udc: split mv_udc.h fileTroy Kisky2013-10-20-118/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move defines only needed by mv_udc.c to a file in the same directory. This allows usbtty to compile for mv_udc, but it still doesn't link. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: gadget: mv_udc: optimize ep_enableTroy Kisky2013-10-20-2/+2
| | | | | | | | | | | | | | | | | | Only get head if not ep0. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: gadget: mv_udc: optimize bounceTroy Kisky2013-10-20-21/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only perform one copy, either in the bounce routine for IN transfers, or the debounce rtn for OUT transfer. On out transfers, only copy the number of bytes received from the bounce buffer Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: gadget: mv_udc: fix full speed connectionsTroy Kisky2013-10-20-14/+34
| | | | | | | | | | | | | | | | | | | | | Set maximum packet length in queue header to wMaxPacketSize of endpoint. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: ehci-mx6: add support for otg portTroy Kisky2013-10-20-42/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, only host1 was supported using an index of 0. Now, otg has index 0, host1 is 1, host2 is 2, host3 is 3. Since OTG requires usbmode to be set after reset, I added CONFIG_EHCI_HCD_INIT_AFTER_RESET to nitrogen6x.h and mx6qsabreauto.h. I also added a weak function board_ehci_power to handle turning power on/off for otg. Type is type of device connected (USB stick vs Host.) Init is type of device desired. Only power up port if type == init == USB_INIT_HOST. Only return error if type != init. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: gadget: mv_udc: don't check CONFIG_USB_MAX_CONTROLLER_COUNTTroy Kisky2013-10-20-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | i.mx6 has 1 otg controller, and 3 host ports. So, CONFIG_USB_MAX_CONTROLLER_COUNT can be greater than 1 even though only 1 device mode controller is supported. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.Troy Kisky2013-10-20-32/+60
| | | | | | | | | | | | | | | | | | | | | This paramter will later be used to initialize OTG ports in host or device mode. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: add enum usb_init_type parameter to usb_lowlevel_initTroy Kisky2013-10-20-17/+17
| | | | | | | | | | | | | | | | | | This parameter will later be used to verify OTG ports. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | usb: rename board_usb_init_type to usb_init_typeTroy Kisky2013-10-20-31/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will be used by usb_lowlevel_init so it will no longer be used by only board specific functions. Move definition of enum usb_init_type higher in file so that it will be available for usb_low_level_init. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * | ARM: omap5-evm: Move MAC creation to misc_initDan Murphy2013-10-20-19/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the MAC creation from the USB init to an function that is called on every boot. This will then populate the usbethaddr mac that kernel driver can pick up from the device tree blob. Signed-off-by: Dan Murphy <dmurphy@ti.com>
| * | usb: am437x: Add support for am437x xhci USB hostDan Murphy2013-10-20-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the support for the am437x xhci usb host. The xHCI host on AM437 is connected to a usb2 phy so need to add support to enable those clocks. Signed-off-by: Dan Murphy <dmurphy@ti.com>
| * | usb: dra7xx: Add support for dra7xx xhci USB hostDan Murphy2013-10-20-15/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the support for the dra7xx xhci usb host. dra7xx does not contain an EHCI controller so the headers can be removed from the board file. The xHCI host on dra7xx is connected to a usb2 phy so need to add support to enable those clocks. Signed-off-by: Dan Murphy <dmurphy@ti.com>
| * | usb: omap: Move the usb phy code to the usb/phy directoryDan Murphy2013-10-20-169/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moving the usb/phy code from xhci-omap to the usb/phy directory and moving the associated phy code over to the new file. Newer TI processors adding xHCI support will have different PHY configurations so therefore abstracting this code away will prevent messing around with the xhci-omap file itself. Signed-off-by: Dan Murphy <dmurphy@ti.com>
| * | usb: omap5: Update the board_usb_init apiDan Murphy2013-10-20-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent patches declares board_usb_init function prototype for a new usb architecture. Turning on the OMAP_XHCI defines cause a redefinition compiler failure. So update the board_usb_init to the latest prototype. Signed-off-by: Dan Murphy <dmurphy@ti.com>
generated by cgit v1.1 at 2024-11-09 21:04:21 +0000