summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
* ENGR00229789 AHCI Disable SATA PHY in initializationRichard Zhu2012-10-17-0/+199
* ENGR00229711 Add weim-nor argument on uboot config Quad/DLAlejandro Sierra2012-10-16-2/+2
* ENGR00229709 Support 2 processors at Linux bootAlejandro Sierra2012-10-16-7/+7
* ENGR00229817: i.mx6dl/mx6solo_sabresd_config: fix the build issueJason Liu2012-10-16-1/+5
* ENGR00229614 mx6: disable VDDPU by default, xpu will enable it if needed.Anson Huang2012-10-16-1/+13
* ENGR00229456 Support for 64bit DDR configuration for ARDAlejandro Sierra2012-10-12-16/+125
* ENGR00227413 Change configuration file names on AIAlejandro Sierra2012-10-12-8/+8
* ENGR00228238 i.mx6/i.mx6dl: sabresd: add solo-ddr32bit supportJason Liu2012-10-11-2/+478
* ENGR00223797-3 IPUv3:Wait for sw reset finishLiu Ying2012-09-27-1/+4
* ENGR00223797-2 MX6Q/DL CPU:Do not disable IPU display channelLiu Ying2012-09-27-2/+4
* ENGR00223797-1 MX6 SabreSD:Align IPU related clocks with kernelLiu Ying2012-09-27-18/+164
* ENGR00223794 MX6 SabreSD:Enable LVDS panel pwm backlightLiu Ying2012-09-27-14/+21
* ENGR00226048 Fix weim nor for mfg toolAlejandro Sierra2012-09-26-3/+2
* ENGR00225691 NAND support on i.MX6Solo ARDAlejandro Sierra2012-09-24-0/+630
* ENGR00225486 Support for spi-nor bootAlejandro Sierra2012-09-21-0/+727
* ENGR00224313:i.MX6 general:enable CONFIG_CMD_IMXOTP to fix the build errorimx-android-r13.5-betaimx-android-r13.4-gaEric Sun2012-09-14-0/+60
* ENGR00224291:i.MX6Q/ARM2-LPDDR2:enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu2012-09-14-0/+11
* ENGR00224272: MFG:i.mx6q/ARM2 enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu2012-09-14-0/+11
* ENGR00223788 mx6sl_evk: change boot args to boot from mmc/sdRobby Cai2012-09-13-2/+2
* ENGR00223027 Add support for nand on MFG for IMX6QAlejandro Sierra2012-09-11-2/+304
* ENGR00223236-1 [MX6]Change the temperature range to -40C ~ 125CAnson Huang2012-09-06-6/+7
* ENGR00222170: Add mx6sl_evk_android_config for mx6sl evk boardLiGang2012-09-06-1/+97
* ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing2012-08-31-0/+53
* ENGR00221503-1 cmd_imxotp: refine the help of this command.Zhang Jiejing2012-08-31-5/+10
* ENGR00222005 mfgtool can't work on mx6slrel_imx_3.0.35_12.09.02Tony LIU2012-08-30-1/+316
* ENGR00219316-2: mx6q sabreauto enable lvds backlight by defaultAdrian Alonso2012-08-29-25/+32
* ENGR00219316-1: mx6 sabreauto: enable mxc_gpio supportAdrian Alonso2012-08-29-9/+20
* ENGR00221013 MX6 SabreSD:Disable LVDS panel CABC functionLiu Ying2012-08-28-0/+38
* ENGR00221332: U_BOOT: remove "boot" and "enable" from configs' nameTerry Lv2012-08-24-7/+7
* ENGR00221135: imx6x: clear PowerDown Enable bit of WDOG1_WMCRRobby Cai2012-08-24-4/+45
* ENGR00221150 Support spi-nor on manufacturing toolimx-android-r13.4-betaAlejandro Sierra2012-08-22-0/+590
* ENGR00220824: mx6sl_evk: mmc: only SD1 supports 8bit on evk board.Ryan QIAN2012-08-21-6/+2
* ENGR00180538-1 MFG download burn sd,spi, nand, nor failed.Francisco Munoz2012-08-21-9/+1330
* ENGR00217505-8 uboot: MX6Q-ARD: set the default gpmi clock to 20MHzHuang Shijie2012-08-20-3/+2
* ENGR00217505-7 uboot: gpmi: update the mtd->ecc_stats when reading page failedHuang Shijie2012-08-20-3/+8
* ENGR00217505-6 uboot: gpmi: set default value for busy_timeoutHuang Shijie2012-08-20-0/+5
* ENGR00217505-5 uboot: gpmi: update the ecc_strength codeHuang Shijie2012-08-20-66/+160
* ENGR00217505-4 uboot: gpmi: replace the gpmi_nfc_reset_block()Huang Shijie2012-08-20-77/+96
* ENGR00217505-3 uboot: gpmi: use the community's nand chip databaseHuang Shijie2012-08-20-108/+19
* ENGR00217505-2 uboot: mtd: update nand_get_flash_type()Huang Shijie2012-08-20-33/+325
* ENGR00217505-1 uboot: MX6Q-ARD: add a NAND boot configHuang Shijie2012-08-20-0/+272
* ENGR00220486 Modify ODT values for Solo AIAlejandro Sierra2012-08-20-4/+4
* ENGR00220161: imx6sl: Add MX6SL EVK SupportRobby Cai2012-08-14-0/+2567
* ENGR00220164 pfuze:rise VDDARM_IN to 1.425V and work around pfuze1.0Robin Gong2012-08-13-0/+45
* ENGR00220076 fix the fastboot usb re-connect issueLiGang2012-08-10-0/+8
* ENGR00219854-1 Enable fastboot feature on mx6q-arm2 boardLiGang2012-08-09-7/+54
* ENGR00219636 MX6 UBOOT : Enlarge command line buffer sizeEric Sun2012-08-07-11/+12
* ENGR00218915-2 MX6 SabreSD:Use new 8bit bmp boot logoLiu Ying2012-08-03-5/+5
* ENGR00218915-1 FSL common:Add new boot logoLiu Ying2012-08-03-1/+30159
* ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authenticationEric Sun2012-08-01-24/+26
generated by cgit v1.1 at 2024-11-25 06:02:03 +0000