summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ppc: Move CONFIG_MAX_MEM_MAPPED to common config.hKumar Gala2009-02-10-6/+8
| | | | | | | | Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent between the two current users (lib_ppc/board.c, 44x SPD DDR2). Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Stefan Roese <sr@denx.de>
* Add an architecture specific config.h for common definesKumar Gala2009-02-10-0/+289
| | | | | | | | | | We have common defines that we duplicate in various ways. Having an arch specific config.h gives us a common location for those defines. Eventually we should be able to replace this when we have proper Kconfig support. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc8641hpcn: Change PCI MEM pci bus addressBecky Bruce2009-02-10-1/+10
| | | | | | | | | | Now that the rest of u-boot can support it, change the PCI bus address of the PCI MEM regions from 0x80000000 to 0xc0000000, and use the same bus address for both PCI1 and PCI2. This will maximize the amount of PCI address space left over to map RAM on systems with large amounts of memory. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* drivers/block/ahci: Fix pci mapping bugBecky Bruce2009-02-10-5/+2
| | | | | | | | The code assumes that the pci bus address and the virtual address used to access a region are the same, but they might not be. Fix this assumption. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* MPC8641HPCN: Enable CONFIG_ADDR_MAPBecky Bruce2009-02-10-0/+2
| | | | Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* mpc8641hpcn: Clean up PCI mapping conceptsBecky Bruce2009-02-10-11/+16
| | | | | | | | | Clean up PCI mapping concepts in the 8641 config - rename _BASE to _BUS, as it's actually a PCI bus address, separate virtual and physical addresses into _VIRT and _PHYS, and use each appopriately. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* mpc86xx: Add support to populate addr map based on BATsBecky Bruce2009-02-10-4/+69
| | | | | | | If CONFIG_ADDR_MAP is enabled, update the address map whenever we write a bat. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* powerpc: Move duplicated BAT defines to mmu.hBecky Bruce2009-02-10-183/+64
| | | | | | | | | | | The BAT fields are architected; there's no need for these to be in cpu-specific files. Drop the duplication and move these to include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only used by the alaska board, and switch to using the BATU_BL_xxx defines used by all the other boards. The BL_ defines previously in use had to be shifted into the proper position for use, which was inefficient. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* drivers/pci: Create pci_map_bar functionBecky Bruce2009-02-10-4/+43
| | | | | | | | It is no longer always true that the pci bus address can be used as the virtual address for pci accesses. pci_map_bar() is created to return the virtual address for a pci region. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* mpc8641hpcn: Set up outbound pci windows before inboundBecky Bruce2009-02-10-6/+6
| | | | | | | | | | Because the inbound pci windows are mapped generously, set up the more specific outbound windows first. This way, when we search the pci regions for something, we will hit on the more specific region. This can actually be a problem on systems with large amounts of RAM. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* mpc8641hpcn: Use physical address in flash banks defintionBecky Bruce2009-02-10-1/+1
| | | | | | | If the VA and PA of the flash aren't the same, the banks list should be initialized to hold the physical address. Correct this. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/masterWolfgang Denk2009-02-07-359/+1364
|\
| * pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matchingKumar Gala2009-02-07-24/+78
| | | | | | | | | | | | | | | | | | | | When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys} we should give preference to memory regions that aren't system memory. Its possible that we have over mapped system memory in the regions and we want to avoid depending on the order of the regions. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarityKumar Gala2009-02-07-43/+43
| | | | | | | | | | | | | | | | | | | | The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and can be confusing when reading the code. Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used for system memory mapping purposes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2009-02-07-4/+27
| |\
| | * NAND: Add timeout for reset commandPeter Tyser2009-02-06-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | Without the timeout present an infinite loop can occur if the NAND device is broken or not present. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TESTPeter Tyser2009-02-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support for disabling the "No NAND device found!!!" warning when CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support for silencing the warning. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * NAND: Fixed invalid pointers to static relocated chip namesValeriy Glushkov2009-02-06-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dear Wolfgang, You are right, the patch was ugly. The new one seems to be better. Signed-off-by: Valeriy Glushkov <gvv@lstec.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * env_nand: fix env memory releasederek@siconix.com2009-02-06-2/+4
| | | | | | | | | | | | | | | | | | | | | This fixes a bug that tmp environment memory not being released. Signed-off-by: Derek Ou <dou@siconix.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk2009-02-07-26/+147
| |\ \
| | * | Coldfire: M527x: Add missing GPIO register address definesRichard Retanubun2009-02-06-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | Add missing GPIO registers address definition for Coldfire M5271. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| | * | Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii commandRichard Retanubun2009-02-06-8/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modified mii_init to support boards with PHYs that are not set to autonegotiate, but still want to use u-boot's mii commands to probe the smi bus. Such PHYs will not set the Autonegotiate-done bit. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| | * | Coldfire: Applied baudrate formula of serial_init to serial_setbrgRichard Retanubun2009-02-06-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Applied the patch for baudrate divider value truncation for serial_init to serial_setbrg as well. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| | * | Coldfire: M5271EVB: Board header update (dependencies)Richard Retanubun2009-02-06-10/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanup for M5271EVB: Added clarification on the use of CONFIG_SYS_CLOCK. Modified to use u-boot's HUSH parser. Cleanup on environment settings. Removed compiler warning by defining CONFIG_SYS_CS0_* Dependencies: Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier. This depends on a patch to include/asm-m68k/m5271.h that defines the multiplier and divider ratios. Removed the definition of CONFIG_SYS_FECI2C. This depends on a patch that removes the use of it in cpu/mcf52x2/cpu_init.c Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| | * | Coldfire: M5271: Allow board header file to specify clock multiplierRichard Retanubun2009-02-06-3/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | M5271 dynamic clock multiplier. It is currently fixed at 100MHz. Allow the board header file to set their own multiplier and divider. Added the #define for the multiplier and divider to the cpu header file. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| | * | Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2CRichard Retanubun2009-02-06-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB). Use read-modify-write to activate the FEC pins without disabling I2C. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| | * | Coldfire: cmd_bdinfo cleanupRichard Retanubun2009-02-06-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_M68K bdinfo cleanup: Fixed compiler warning about baudrate printing. format '%d' expects type 'int', but argument 2 has type 'long unsigned int'. Added printing of "cpufreq" Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| | * | Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core listRichard Retanubun2009-02-06-1/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | Added the CONFIG_M5271 to the list of Coldfire V2 processor. This was causing the bus clock (not CPU clock) to be declared twice as fast as it actually is. This causes UARTS to operate at half the specified baudrate. Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-02-07-212/+331
| |\ \
| | * | Blackfin: move default boot SPI CS to common codeMike Frysinger2009-02-05-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the default SPI CS that we boot from into common code so that it can be used in other SPI drivers and environment settings. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: dynamically update UART speed when initializingMike Frysinger2009-02-05-91/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, booting over the UART required the baud rate to be known ahead of time. Using a bit of tricky simple math, we can calculate the new board rate based on the old divisors. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
| | * | Blackfin: add support for fast SPI reads with Boot ROMMike Frysinger2009-02-05-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer Blackfin boot roms support using the fast SPI read command rather than just the slow one. If the functionality is available, then use it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: check for reserved settings in DDR MMRsMike Frysinger2009-02-05-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some bits of the DDR MMRs should not be set. If they do, bad things may happen (like random failures or hardware destruction). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: set default voltage levels for BF538/BF539 partsMike Frysinger2009-02-05-0/+3
| | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: use on-chip syscontrol() rom function when availableMike Frysinger2009-02-05-22/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer Blackfin's have an on-chip rom with a syscontrol() function that needs to be used to properly program the memory and voltage settings as it will include (possibly critical) factory tested bias values. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| | * | Blackfin: update anomaly listsMike Frysinger2009-02-03-84/+213
| | |/ | | | | | | | | | | | | | | | Update the anomaly lists to match latest anomaly sheets. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk2009-02-07-40/+31
| |\ \
| | * | cfi_flash: Fix typo in cfi_flash.cStefan Roese2009-02-05-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch "flash/cfi_flash: Use virtual sector start address, not phys" introduced a small typo and compilation warning for systems with CFI legacy support (e.g. hcu4). This patch fixes it. Signed-off-by: Stefan Roese <sr@denx.de>
| | * | jedec_flash: Only use manufacturer defines from common flash.hStefan Roese2009-02-05-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the double defined manufacturer defines from jedec_flash.c. Since the common defines in flash.h are 32bit we now need the (16) cast. This patch also removes the compilation warning (e.g. seen on hcu5): ./MAKEALL hcu5 Configuring for hcu5 board... jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type Signed-off-by: Stefan Roese <sr@denx.de>
| | * | cfi_flash: Silence compilation warningStefan Roese2009-02-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch "flash/cfi_flash: Use virtual sector start address, not phys" introduced a small compilation warning. This patch fixes it. Signed-off-by: Stefan Roese <sr@denx.de>
| | * | flash/cfi_flash: Use virtual sector start address, not physBecky Bruce2009-02-05-30/+25
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | include/flash.h was commented to say that the address in flash_info->start was a physical address. However, from u-boot's point of view, and looking at most flash code, it makes more sense for this to be a virtual address. So I corrected the comment to indicate that this was a virtual address. The only flash driver that was actually treating the address as physical was the mtd/cfi_flash driver. However, this code was using it inconsistently as it actually directly dereferenced the "start" element, while it used map_physmem to get a virtual address in other places. I changed this driver so that the code which initializes the info->start field calls map_physmem to get a virtual address, eliminating the need for further map_physmem calls. The code is now consistent. The *only* place a physical address should be used is when defining the flash banks list that is used to initialize the flash_info struct, usually found in the board config file. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-02-07-5/+26
| |\ \
| | * | ppc4xx: Make PCIE support selectableDirk Eibach2009-02-06-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some platforms PCIE support is not required, but would be included because the cpu supports it. To reduce fooprint it is now configurable via CONFIG_PCI_DISABLE_PCIE. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| | * | ppc4xx: Only fixup opb attached UARTsMatthias Fuchs2009-02-06-2/+22
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the fdt UART clock fixup code to only touch CPU internal UARTs on 4xx systems. Only these UARTs are definitely clocked by gd->uart_clk. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk2009-02-07-5/+681
| |\ \ | | |/ | |/|
| | * ADS5121 Add PATA supportRalph Kondziella2009-02-03-1/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Original patch from Ralph Kondziella plus clean up by Wolfgang Denk plus changes by John Rigby use ips clock not lpc port forward to current u-boot release Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de> Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: John Rigby <jrigby@freescale.com>
| | * ADS5121 Add IC Ident Module (IIM) supportMartha Marx2009-02-03-1/+449
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IIM (IC Identification Module) is the fusebox for the mpc5121. Use #define CONFIG_IIM to turn on the clock for this module use #define CONFIG_CMD_FUSE to add fusebox commands. Fusebox commands include the ability to read the status, read the register cache, override the register cache, program the fuses and sense them. Signed-off-by: Martha Marx <mmarx@silicontkx.com> Signed-off-by: John Rigby <jrigby@freescale.com>
| | * ADS5121 Fix rev2 silicon pci iopad configJohn Rigby2009-02-03-1/+12
| | | | | | | | | | | | | | | | | | Reset config is not correct Signed-off-by: John Rigby <jrigby@freescale.com>
| | * ADS5121 DIU Add diu_bmp_addr envJohn Rigby2009-02-03-2/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for using a bmp other than FSL_Logo_BMP for the DIU splash screen. Can now set the env var "diu_bmp_addr" to the address of a BMP in flash to use instead of the default FSL_Logo_BMP. Signed-off-by: Martha Marx <mmarx@silicontkx.com> Signed-off-by: John Rigby <jrigby@freescale.com>
| | * ADS5121 DIU Make inclusion of FSL logo optionalJohn Rigby2009-02-03-0/+5
| | | | | | | | | | | | | | | | | | | | | Make inclusion of FSL logo optional and turn it off by default. Signed-off-by: John Rigby <jrigby@freescale.com>
generated by cgit v1.1 at 2024-11-18 21:24:10 +0000