summaryrefslogtreecommitdiff
Commit message (Expand)AuthorAgeLines
* ENGR00155018 mx53_pcba: update Ripley AUX input to 950mA and charge currentWayne Zou2011-08-19-2/+3
* ENGR00154998 mx53 pcba: correct the default bootargsXinyu Chen2011-08-18-29/+9
* ENGR00154924 [MX6]Disable some clocks in ubootAnson Huang2011-08-17-2/+7
* ENGR00154396: U_BOOT: Env config adjustment.Terry Lv2011-08-12-85/+85
* ENGR00154762 mx53_pcba: update Ripley/mc34708 USB/AUX charger settingsWayne Zou2011-08-12-4/+13
* ENGR00154468 mx53 pcba: Add DC-IN power supply support for revB boardWayne Zou2011-08-08-1/+9
* ENGR00154400 mx53 pcba: bringup update for RevB boardXinyu Chen2011-08-05-13/+16
* ENGR00153761 imx6q ipuv3: improve display qualityrel_imx_2.6.38_11.08.00Jason Chen2011-07-27-2/+8
* ENGR00153759 mx51: fix fastboot build failed without boot partition macroXinyu Chen2011-07-27-0/+2
* ENGR00153526 mx53 pcba: add pcba board revB support in ubootXinyu Chen2011-07-27-3/+1734
* ENGR00153605 fastboot: uboot cannot be burned to boot partitionSammy He2011-07-26-5/+16
* ENGR00153597 [MX6]Enbale MMDC low powerAnson Huang2011-07-25-3/+4
* ENGR00143438 [MX50 RD3]DCDC_3V15 GPIO changeAnson Huang2011-07-22-2/+2
* ENGR00151310 mx53 smd: force warm reset as cold resetLily Zhang2011-07-22-15/+9
* ENGR00151695 mx53 ddr3: update ESDREF and MR0Lily Zhang2011-07-21-9/+9
* ENGR00152843 mx51/3: align the android default env with documentXinyu Chen2011-07-21-61/+21
* ENGR00153394 mx50 rd3: make SDHC1 as default boot device for androidXinyu Chen2011-07-20-48/+50
* ENGR00152907 MX5X: update GPU default cmdline.Zhang Jiejing2011-07-14-39/+39
* ENGR00152755 MX6 Switch DRAM init script from plugin to DCD for emmc fastbootAnish Trivedi2011-07-06-265/+146
* ENGR00139206 MX6 USDHC eMMC 4.4 supportAnish Trivedi2011-07-05-24/+75
* ENGR00152439: MX51: PLL workaround should be implemented only for PLL1Ranjani Vaidyanathan2011-07-01-2/+15
* ENGR00152241 MX6: enable 1G speed mode for PHY and ENETZeng Zhaoming2011-06-29-10/+41
* ENGR00139198: iMX61 uBoot add ENET supportZeng Zhaoming2011-06-27-69/+139
* ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU boardAnson Huang2011-06-24-8/+10711
* ENGR00151966: MX51 - Apply SW workaround for the PLL1 unlock HW issue.Ranjani Vaidyanathan2011-06-22-10/+43
* ENGR00151892 MX50: Workaround to prevent PLL1 from losing lockAnish Trivedi2011-06-21-24/+59
* ENGR00151187 MX53 SMD: Kernal stopped Usb driver after reseting in stop modeWayne Zou2011-06-10-1/+14
* ENGR00144224: MX53: Add MMU mapping for all peripheralsTerry Lv2011-06-09-36/+84
* ENGR00144389 mx53 QS Ripley: change VCC from 1.35V to 1.3V QS Ripley boardWayne Zou2011-06-01-2/+2
* ENGR00144060 MX53_SMD: recovery android, update recovery command for emmc.Zhang Jiejing2011-05-26-1/+1
* ENGR00143837 mx50 rd3: support android boot from RD3 NAND deviceXinyu Chen2011-05-23-12/+7
* ENGR00143704: U_BOOT: Nand oobsize is wrong in some nand chipsTerry Lv2011-05-20-7/+11
* ENGR00143298: Reinit uart after using clk commandTerry Lv2011-05-20-0/+6
* ENGR00143302 Add mc34708 pmic support on loco/Ripley boardZou Weihua -wayne zou2011-05-20-10/+47
* ENGR00143570 mx53: change the default environment settingLily Zhang2011-05-19-10/+14
* ENGR00143613 uboot: update the android ramdisk load addressXinyu Chen2011-05-18-3/+3
* ENGR00143469 mx53 smd: pull down GPIO_9 to reset the boardLily Zhang2011-05-16-0/+15
* ENGR00143461 mx51 evk: increase VDDGP as 1.1v for 800MHZLily Zhang2011-05-16-0/+5
* ENGR00143457: Don't let ROM copy .bss sectionJason Liu2011-05-16-5/+9
* ENGR00143442 uboot: support android spi boot and mfg on mx50 rd3 boardXinyu Chen2011-05-16-4/+443
* ENGR00143428 mx53 ard RevB: use internal clock for sataLily Zhang2011-05-14-0/+19
* ENGR00142995 MX50: Enable uSDHC instead of eSDHC for SDR modeAnish Trivedi2011-05-10-13/+103
* ENGR00143178 mx53 ARD DDR3 board: add MFG tool supportLily Zhang2011-05-10-0/+231
* ENGR00142740 mx50 rdp: mfg support GPMI nand by command lineXinyu Chen2011-04-29-2/+2
* ENGR00142497 Android: MX53_SMD: check eMMC and SD recovery file.Zhang Jiejing2011-04-22-38/+42
* ENGR00142322: mx53-smd: spi nor: can't erase 0x200000 sizeTerry Lv2011-04-20-14/+14
* ENGR00141885: mx50 and mx53 reboot fail when booting from spi norTerry Lv2011-04-20-2/+15
* ENGR00142259 set UART2_RXD (GP6_11) to highRobby Cai2011-04-18-0/+10
* ENGR00142247 MX50: Add PD+3 routine for all DDR typesRobby Cai2011-04-16-18/+34
* ENGR00142246 MX50 Update DDR2 script to use more optimized settingsRobby Cai2011-04-16-123/+64
generated by cgit v1.1 at 2024-12-30 02:48:06 +0000