summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ppc4xx: Updates to Korat-specific codeLarry Johnson2008-03-27-75/+463
| | | | | | | | | | | | | | | | This patch contains updates for changes for the Korat PPC440EPx board. These changes include: (1) Support for "permanent" and "upgradable" copies of U-Boot, as described in the new "doc/README.korat" file; (2) a new memory map for the registers in the board's CPLD; (3) a revised format for manufacturer's data in serial EEPROM; and (4) changes to track updates to U-Boot for the Sequoia board. Signed-off-by: Larry Johnson <lrj@acm.org>
* ppc4xx: PPC405EP Set EMAC noise filter bitsMarkus Brunner2008-03-27-1/+1
| | | | | | | | | This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPxMike Nuss2008-03-27-1/+99
| | | | | | | | | | | | On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured after startup to change the speed of the clocks. This patch adds the option CFG_PLL_RECONFIG. If this option is set to 667, the CPU initialization code will reconfigure the PLL to run the system with a CPU frequency of 667MHz and PLB frequency of 166MHz, without the need for an external EEPROM. Signed-off-by: Mike Nuss <mike@terascala.com> Acked-by: Stefan Roese <sr@denx.de>
* ppc: Set CFG_MEM_TOP_HIDE to 0 if not already definedStefan Roese2008-03-27-0/+4
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add fdt support to Prodrive alprStefan Roese2008-03-27-2/+36
| | | | | | | | Since this board will probably be ported to arch/powerpc in the near future, we add device tree support now. This way we are "ready" for arch/powerpc from now on. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Enable cache support on the ALPR boardPieter Voorthuijsen2008-03-27-0/+10
| | | | Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
* ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"Stefan Roese2008-03-27-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CFG_MEM_TOP_HIDE is defined in the board config header, this specified memory area will get subtracted from the top (end) of ram and won't get "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel should gets passed the now "corrected" memory size and won't touch it either. This should work for arch/ppc and arch/powerpc. Only Linux board ports in arch/powerpc with bootwrapper support, which recalculate the memory size from the SDRAM controller setup, will have to get fixed in Linux additionally. This patch enables this config option on some PPC440EPx boards as a workaround for the CHIP 11 errata. Here the description from the AMCC documentation: CHIP_11: End of memory range area restricted access. Category: 3 Overview: The 440EPx DDR controller does not acknowledge any transaction which is determined to be crossing over the end-of-memory-range boundary, even if the starting address is within valid memory space. Any such transaction from any PLB4 master will result in a PLB time-out on PLB4 bus. Impact: In case of such misaligned bursts, PLB4 masters will not retrieve any data at all, just the available data up to the end of memory, especially the 440 CPU. For example, if a CPU instruction required an operand located in memory within the last 7 words of memory, the DCU master would burst read 8 words to update the data cache and cross over the end-of-memory-range boundary. Such a DCU read would not be answered by the DDR controller, resulting in a PLB4 time-out and ultimately in a Machine Check interrupt. The data would be inaccessible to the CPU. Workaround: Forbid any application to access the last 256 bytes of DDR memory. For example, make your operating system believe that the last 256 bytes of DDR memory are absent. AMCC has a patch that does this, available for Linux. This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards: lwmon5, korat, sequoia The other remaining 440EPx board were intentionally not included since it is not clear to me, if they use the end of ram for some other purpose. This is unclear, since these boards have CONFIG_PRAM defined and even comments like this: PMC440.h: /* esd expects pram at end of physical memory. * So no logbuffer at the moment. */ It is strongly recommended to not use the last 256 bytes on those boards too. Patches from the board maintainers are welcome. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)Stefan Roese2008-03-27-2/+0
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Correctly pass phyiscal FLASH base address into dtbStefan Roese2008-03-27-1/+1
| | | | | | | | | The routine ft_board_setup() configures the EBC NOR mappings for the Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS problem, we need to pass the corrected address here too. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix compilation warning in 4xx_enet.cStefan Roese2008-03-27-7/+6
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add AMCC Glacier 406GT eval board supportStefan Roese2008-03-27-25/+195
| | | | | | | | | | | | | | This patch adds support for the AMCC Glacier 460GT eval board. The main difference to the Canyonlands board are listed here: - 4 ethernet ports instead of 2 - no SATA port - no USB port Currently EMAC2+3 are not working. This will be fixed in a later release. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clearStefan Roese2008-03-27-3/+4
| | | | Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/masterWolfgang Denk2008-03-27-7/+13
|\
| * Fix out of tree building issueAnatolij Gustschin2008-03-27-7/+13
| | | | | | | | | | | | | | Currently U-Boot building in some external directory doesn't work. This patch tries to fix the problem. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2008-03-27-141/+794
|\ \
| * | 85xx: Add cpu_mp_lmb_reserve helper to reserve boot pageKumar Gala2008-03-26-0/+15
| | | | | | | | | | | | | | | | | | | | | Provide a board_lmb_reserve helper function to ensure we reserve the page of memory we are using for the boot page translation code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: Update multicore boot mechanism to ePAPR v0.81 specKumar Gala2008-03-26-74/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following changes are needed to be inline with ePAPR v0.81: * r4, r5 and now always set to 0 on boot release * r7 is used to pass the size of the initial map area (IMA) * EPAPR_MAGIC value changed for book-e processors * changes in the spin table layout * spin table supports a 64-bit physical release address Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | FSL: Clean up board/freescale/common/MakefileJon Loeliger2008-03-26-42/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each file that can be built here now follows some CONFIG_ option so that they are appropriately built or not, as needed. And CONFIG_ defines were added to various board config files to make sure that happens. The other board/freescale/*/Makefiles no longer need to reach up and over into ../common to build their individually needed files any more. Boards that are CDS specific were renamed with cds_ prefix. Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | 85xx: Fix merge duplicationKumar Gala2008-03-26-49/+0
| | | | | | | | | | | | | | | | | | ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: Expand CCSR space with more DDR controller registers.James Yang2008-03-26-4/+21
| | | | | | | | | | | | | | | | | | Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: Speed up get_ddr_freq() and get_bus_freq()James Yang2008-03-26-18/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were called. However, get_sys_info() recalculates extraneous information when called each time. Have get_ddr_freq() and get_bus_freq() return memoized values from global_data instead. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: Show DDR memory data rate in addition to the memory clock frequency.James Yang2008-03-26-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Show the DDR memory data rate in addition to the memory clock frequency. For DDR/DDR2 memories the memory data rate is 2x the memory clock. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: get_tbclk() speed up and rounding fixJames Yang2008-03-26-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Speed up get_tbclk() by referencing pre-computed bus clock frequency value from global data instead of sys_info_t. Fix rounding of result to nearest; previously it was rounding upwards. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | Update SVR numbers to expand supportAndy Fleming2008-03-26-50/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FSL has taken to using SVR[16:23] as an SOC sub-version field. This is used to distinguish certain variants within an SOC family. To account for this, we add the SVR_SOC_VER() macro, and update the SVR_* constants to reflect the larger value. We also add SVR numbers for all of the current variants. Finally, to make things neater, rather than use an enormous switch statement to print out the CPU type, we create and array of SVR/name pairs (using a macro), and print out the CPU name that matches the SVR SOC version. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | Add the Freescale PCI device IDsAndy Fleming2008-03-26-0/+23
| | | | | | | | | | | | Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | 85xx: Added support for multicore boot mechanismKumar Gala2008-03-26-0/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the cpu command that provides a generic mechanism to get status, reset, and release secondary cores in multicore processors. Added support for using the ePAPR defined spin-table mechanism on 85xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | 85xx: Added support for multicore boot mechanismKumar Gala2008-03-26-0/+513
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added the cpu command that provides a generic mechanism to get status, reset, and release secondary cores in multicore processors. Added support for using the ePAPR defined spin-table mechanism on 85xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | 85xx: Add the concept of CFG_CCSRBAR_PHYSKumar Gala2008-03-26-19/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | When we go to 36-bit physical addresses we need to keep the concept of the physical CCSRBAR address seperate from the virtual one. For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-usbWolfgang Denk2008-03-27-4/+4
|\ \ \ | |_|/ |/| |
| * | USB, Storage: fix a bug introduced in commitMarkus Klotzbuecher2008-03-26-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info to only print only information on one storage device, but not for multiple. Signed-off-by: Markus Klotzbuecher <mk@denx.de>
| * | Fix compilation error in cmd_usb.cAnatolij Gustschin2008-03-26-1/+1
| |/ | | | | | | | | | | | | | | | | This patch fixes compilation error cmd_usb.c: In function 'do_usb': cmd_usb.c:552: error: void value not ignored as it ought to be Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Markus Klotzbuecher <mk@denx.de>
* | README: update documentation (availability, links, etc.)Anatolij Gustschin2008-03-27-1/+1
| | | | | | | | | | | | Fix typo in README Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Fix compilation error in cmd_usb.cAnatolij Gustschin2008-03-27-1/+1
| | | | | | | | | | | | | | | | This patch fixes compilation error cmd_usb.c: In function 'do_usb': cmd_usb.c:552: error: void value not ignored as it ought to be Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Add support for setting the I2C bus speed in fsl_i2c.cTimur Tabi2008-03-27-9/+105
| | | | | | | | | | | | | | | | | | | | Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, but fsl_i2c.c ignores it and uses conservative value when programming the I2C bus speed. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Andy Fleming <afleming@freescale.com>
* | Coding style cleanup, update CHANGELOGWolfgang Denk2008-03-27-27/+157
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | drivers: add the support for Freescale SATA controllerDave Liu2008-03-26-0/+1291
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the Freescale on-chip SATA controller driver to u-boot, The SATA controller is used on the 837x and 8315 targets, The driver can be used to load kernel, fs and dtb. The features list: - 1.5/3 Gbps link speed - LBA48, LBA28 support - DMA and FPDMA support - Two ports support Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: add the readme for SATA command lineDave Liu2008-03-26-0/+68
| | | | | | | | Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: enable the sata initialize on boot upDave Liu2008-03-26-0/+8
| | | | | | | | Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: add the fis struct for SATADave Liu2008-03-26-0/+156
| | | | | | | | Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: add the libata supportDave Liu2008-03-26-0/+364
| | | | | | | | | | | | add simple libata support in u-boot Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: make the ata_piix driver using new SATA frameworkDave Liu2008-03-26-166/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | original ata_piix driver is using IDE framework, not real SATA framework. For now, the ata_piix driver is only used by x86 sc520_cdp board. This patch makes the ata_piix driver use the new SATA framework, so - remove the duplicated command stuff - remove the CONFIG_CMD_IDE define in the sc520_cdp.h - add the CONFIG_CMD_SATA define to sc520_cdp.h Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: add the support for SATA frameworkDave Liu2008-03-26-0/+222
| | | | | | | | | | | | | | - add the SATA framework - add the SATA command line Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: merge the header of ata_piix driverDave Liu2008-03-26-1/+1
| | | | | | | | | | | | move the sata.h from include/ to drivers/block/ata_piix.h Signed-off-by: Dave Liu <daveliu@freescale.com>
* | ata: merge the ata_piix driverDave Liu2008-03-26-731/+671
|/ | | | | | | | move the cmd_sata.c from common/ to drivers/ata_piix.c, the cmd_sata.c have some part of ata_piix controller drivers. consolidate the driver to have better framework. Signed-off-by: Dave Liu <daveliu@freescale.com>
* Coding style cleanup.Wolfgang Denk2008-03-26-11/+11
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Add CFG_RTC_DS1337_NOOSC to turn off OSC outputJoakim Tjernlund2008-03-26-2/+10
| | | | | | | | The default settings for RTC DS1337 keeps the OSC output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to turn it off. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* Cleanup coding style, update CHANGELOGWolfgang Denk2008-03-26-80/+1505
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master_merge_new-image' of /home/tur/git/u-bootWolfgang Denk2008-03-26-3225/+8248
|\
| * Merge branch 'new-image' of git://www.denx.de/git/u-boot-testingBartlomiej Sieka2008-03-26-3225/+8248
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: common/cmd_bootm.c cpu/mpc8xx/cpu.c Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| | * [new uImage] Enable new uImage support for the pcs440ep board.Bartlomiej Sieka2008-03-20-0/+6
| | | | | | | | | | | | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
generated by cgit v1.1 at 2024-12-03 06:44:49 +0000