summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* mpc83xx: Consolidate the ECC support of 83xxDave Liu2007-08-10-706/+391
| | | | | | | | Remove the duplicated source code of ecc command on the <board>.c, for reused, move these code to cpu/mpc83xx directory. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Correct the burst length for DDR2 with 32 bitsDave Liu2007-08-10-3/+10
| | | | | | The burst length should be 4 for DDR2 with 32 bits bus Signed-off-by: Dave Liu <daveliu@freescale.com>
* mpc83xx: add support for the MPC8323E RDBKim Phillips2007-08-10-0/+952
| | | | | | | | | | | MPC8323E based board with 64MB fixed SDRAM, 16MB flash, five 10/100 ethernet ports connected via an ICPlus IP175C switch, one PCI slot, and serial. Features not supported in this patch are SD card interface, 2 USB ports, and the two phone ports. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: fixup generic pci for libfdtKim Phillips2007-08-10-1/+35
| | | | | | add libfdt support to the generic 83xx pci code Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: fix 8360 and cpu functions to update fdt being passedKim Phillips2007-08-10-22/+22
| | | | | | | ..and not the global fdt. Rename local fdt vars to blob so as not to be confused with the global var with the same three-letter name. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabledJerry Van Baren2007-08-10-28/+46
| | | | | | | | | | Several node strings were not correct (trailing slashes and properties in the strings) Added setting of the timebase-frequency. Improved error messages and use debug() instead of printf(). Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().Jerry Van Baren2007-08-10-20/+14
| | | | | | | | | | | The new name matches more closely the kernel's name, which is also a much better description. These are the mpc83xx changes made necessary by the function name change. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Gerald Van Baren <vanbaren@cideas.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Add support for the display of reset statusDave Liu2007-08-10-2/+42
| | | | | | | | | | | | | 83xx processor family has many reset sources, such as power on reset, software hard reset, software soft reset, JTAG, bus monitor, software watchdog, check stop reset, external hard reset, external software reset. sometimes, to figure out the fault of system, we need to know the cause of reset early before the prompt of u-boot present. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Fix the align bug of SDMA bufferDave Liu2007-08-10-2/+2
| | | | | | | | According to the latest user manual, the SDMA temporary buffer base address must be 4KB aligned. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Revise the MPC8360EMDS readme docDave Liu2007-08-10-1/+22
| | | | | | | | | | | When the rev2.x silicon mount on the MPC8360EMDS baord, and if you are using the u-boot version after the commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca. to make the ethernet interface usable, we have to setup the jumpers correctly. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* FSL I2C driver programs the two I2C busses differentlyTimur Tabi2007-08-10-1/+2
| | | | | | | | | The i2c_init() function in fsl_i2c.c programs the two I2C busses differently. The second I2C bus has its slave address programmed incorrectly and is missing a 5-us delay. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Update SCCR programming in cpu_init_f() to support all 83xx processorsTimur Tabi2007-08-10-2/+14
| | | | | | | | | | | | | Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the bitfields for all 83xx processors. The code to update some bitfields was compiled only on some processors. Now, the bitfields are programmed as long as the corresponding CFG_SCCR option is defined in the board header file. This means that the board header file should not define any CFG_SCCR macros for bitfields that don't exist on that processor, otherwise the SCCR will be programmed incorrectly. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* TQM834x: cleanup configuratonMartin Krause2007-08-10-3/+0
| | | | | | | Remove irritating #undef DEBUG Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* MPC83xx: Fix makefile to generate config.h file in the build directorydavid.saada2007-08-10-8/+8
| | | | | | | | MPC83xx: Fix the Makefile config sections to generate the include/config.h file in the build directory instead of the source directory. Signed-off-by: David Saada <david.saada@ecitele.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Add support for 8360 silicon revision 2.1Lee Nipper2007-08-10-2/+9
| | | | | | | This change adds 8360 silicon revision 2.1 support to u-boot. Signed-off-by: Lee Nipper <lee.nipper@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge with git+ssh://atlas/home/wd/git/u-boot/masterWolfgang Denk2007-08-09-4/+41
|\
| * Merge with /home/wd/git/u-boot/workWolfgang Denk2007-08-09-1/+36
| |\
| | * Treat ppc64 host as ppcKumar Gala2007-08-09-0/+1
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * Minor fix for bios emulator makefileJason Jin2007-08-09-1/+1
| | | | | | | | | | | | | | | | | | Add $(obj) to LIB avoiding objects be built in the source dir Signed-off-by: Jason Jin <Jason.jin@freescale.com>
| | * Add CONFIG_BIOSEMU define to guard all the bios emulator codeJason Jin2007-08-09-0/+32
| | | | | | | | | | | | | | | | | | Signed-off-by: Jason Jin <Jason.jin@freescale.com> This patch fix the compile issue on the board that did not enable the bios emulator
| | * tsec: fix multiple PHY supportZach Sadecki2007-08-09-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx" broke multiple PHY support in tsec.c. This fixes it. Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | Merge with /home/wd/git/u-boot/workWolfgang Denk2007-08-09-3/+5
| |\ \ | | |/
| | * tsec: Allow Ten Bit Interface address to be configurableJoe Hamman2007-08-09-3/+5
| | | | | | | | | | | | | | | | | | | | | Allow the address of the Ten Bit Interface (TBI) to be changed in the event of a conflict with another device. Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
* | | Merge with /home/wd/git/u-boot/custodian/u-boot-usbWolfgang Denk2007-08-09-502/+5305
|\ \ \
| * \ \ Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-07-121209/+48312
| |\ \ \ | | |/ /
| * | | USB: This patch fix readl in ohci swap reg access.Jason Jin2007-06-11-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Jason Jin <Jason.jin@freescale.com>
| * | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-06-06-667/+1285
| |\ \ \
| * | | | TRAB, USB: update trab board configuration for use of generic ohci driverMarkus Klotzbuecher2007-06-06-1/+2
| | | | |
| * | | | USB: ohci fixes and cleanup for ppc4xx and yosemite board.Markus Klotzbuecher2007-06-06-1/+52
| | | | |
| * | | | USB: ohci fixes and cleanup for mpc5xxx and IceCube board configMarkus Klotzbuecher2007-06-06-7/+56
| | | | |
| * | | | USB/OHCI: endianness cleanup in the generic ohci driverMarkus Klotzbuecher2007-06-06-69/+62
| | | | |
| * | | | Files include/linux/byteorder/{big,little}_endian.h defineRodolfo Giometti2007-06-06-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | __BIG_ENDIAN and __LITTLE_ENDIAN. Signed-off-by: Rodolfo Giometti <giometti@linux.it>
| * | | | Add USB PCI-OHCI, USB keyboard and event poll support to theZhang Wei2007-06-06-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPC8641HPCN board config file. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
| * | | | USB PCI-OHCI, interrupt pipe and usb event poll supportZhang Wei2007-06-06-55/+267
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch added USB PCI-OHCI chips support, interrupt pipe support and usb event poll support. For supporting the USB interrupt pipe, the globe urb_priv is moved to purb in ed struct. Now, we can process several urbs at one time. The interrupt pipe support codes are ported from Linux kernel 2.4. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
| * | | | USB event poll supportZhang Wei2007-06-06-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds USB event poll support, which could be used in usbkbd and other usb devices driver when the asynchronous interrupt processing is supported. Signed-off-by: Zhang Wei <wei.zhang@freescale.com
| * | | | ISP116x: delay for crappy USB keysRodolfo Giometti2007-06-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using some (very) slow USB keys cause the USB host controller buffers are not ready to be read by the CPU so we need an extra delay before reading the USB storage data. Signed-off-by: Rodolfo Giometti <giometti@linux.it>
| * | | | Change duplicate usb_cpu_init_fail to usb_board_init_failMarkus Klotzbuecher2007-06-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing this out. Signed-off-by: Markus Klotzbuecher <mk@denx.de>
| * | | | Merge git://www.denx.de/git/u-boot into 2007_05_15-testingMarkus Klotzbuecher2007-05-29-941/+3129
| |\ \ \ \
| * | | | | Fix an ancient CHANGELOG conflictMarkus Klotzbuecher2007-05-07-18/+14
| | | | | |
| * | | | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-05-07-428/+5103
| |\ \ \ \ \
| * \ \ \ \ \ Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-04-23-5183/+14964
| |\ \ \ \ \ \
| * \ \ \ \ \ \ Merge with /home/mk/git/u-boot-usb-hacking#testingMarkus Klotzbuecher2007-04-23-1/+3
| |\ \ \ \ \ \ \
| | * | | | | | | USB: (Another) delay for crappy USB keys.Rodolfo Giometti2007-04-23-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB keys are slow in giving back an answer when the Root HUB enables power lines. Signed-off-by: Rodolfo Giometti <giometti@linux.it>
| * | | | | | | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-04-03-15/+29
| |\ \ \ \ \ \ \ \ | | |/ / / / / / / | |/| | | | | | |
| * | | | | | | | Support for the Philips ISP116x HCD (Host Controller Driver)Rodolfo Giometti2007-04-03-2/+1906
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
| * | | | | | | | USB: cleanup monahans usb support. Remove dead code.Markus Klotzbuecher2007-04-03-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Markus Klotzbuecher <mk@denx.de>
| * | | | | | | | PXA: pxa27x USB OHCI supportRodolfo Giometti2007-03-26-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Rodolfo Giometti <giometti@linux.it>
| * | | | | | | | USB: remove the S3C24X0_merge #define, which was introduced whileMarkus Klotzbuecher2007-03-26-53/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | merging OHCI drivers. Signed-off-by: Markus Klotzbuecher <mk@denx.de>
| * | | | | | | | Merge with git://www.denx.de/git/u-boot.git#testing-USBMarkus Klotzbuecher2007-03-23-424/+3044
| |\ \ \ \ \ \ \ \
| | * \ \ \ \ \ \ \ Merge with /home/mk/git/u-boot-generic_ohci#generic_ohciWolfgang Denk2006-11-27-38/+162
| | |\ \ \ \ \ \ \ \
generated by cgit v1.1 at 2024-11-22 16:25:09 +0000