summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Patch by Travis Sawyer, 30 Dec 2003:wdenk2004-02-06-515/+4749
| | | | | | | Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, select MDI port based on enabled EMAC device. Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX base PrPMC board.
* * Patch by Wolter Kamphuis, 15 Dec 2003:wdenk2004-02-06-41/+34
| | | | | | made CONFIG_SILENT_CONSOLE usable on all architectures * Disable date command on TQM866M - there is no RTC on MPC866
* Fix bootfile default settings for TQM boardswdenk2004-01-31-5/+5
|
* Fix variable CPU clock for MPC859/866 systems for low CPU clockswdenk2004-01-31-20/+72
|
* * Implement adaptive SDRAM timing configuration based on actual CPUwdenk2004-01-29-43/+126
| | | | | | | clock frequency for INCA-IP; fix problem with board hanging when switching from 150MHz to 100MHz * Add PCMCIA CS support for BMS2003 board
* * Add variable CPU clock for MPC859/866 systems (so far only TQM866M):wdenk2004-01-24-156/+391
| | | | | | | | see doc/README.MPC866 for details; implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866; calculate CPU clock frequency from PLL register values. * Add support for 128 MB RAM on TQM8xxL/M modules
* * Fix PS/2 keyboard problem caused by statically initialized variablewdenk2004-01-21-8/+18
| | | | | | pointing to a location in flash * Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
* * The PS/2 mux on the BMS2003 board needs 450 ms after power onwdenk2004-01-20-2300/+2401
| | | | | | | | | | | | before we can access it; add delay in case we are faster (with no CF card inserted) * Cleanup of some init functions * Make sure SCC Ethernet is always stopped by the time we boot Linux to avoid Linux crashes by early packets coming in. * Accelerate flash accesses on LWMON board by using buffered writes
* Fix typo in Makefile;wdenk2004-01-18-2/+5
| | | | fix problem with PARTNUM detection
* [Strange. I _did_ check these in before. Seems SF restored an oldwdenk2004-01-16-53/+2339
| | | | | | | | | | | | | | | | version of the repository???] * Patch by Reinhard Meyer, 09 Jan 2004: - add RTC support for MPC5200 based boards (requires RTC_XTAL) * Add support for IDE LED on BMS2003 board (exclusive with status LED!) * Add support for PS/2 keyboard (used with PS/2 multiplexor on BMS2003 board) * Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004: Add common files for "emk" boards
* Add a common get_ram_size() function and modify the thewdenk2004-01-06-3471/+1945
| | | | board-specific files to invoke that common implementation.
* Fix comment.wdenk2004-01-06-1/+1
|
* Set default clock for INCA-IP to 150 MHzwdenk2004-01-06-2/+4
| | | | Prepare for 1.0.1 release
* * Make BMS2003 use a separate config file to avoid #ifdef mess;wdenk2004-01-04-19/+698
| | | | | | | | add I2C support; add support for DS1337 RTC * Add CompactFlash support for BMS2003 board * Add support for status LED on BMS2003 board
* * Fix problems caused by Robert Schwebel's cramfs patchwdenk2004-01-04-1654/+1826
| | | | | | | | | | | | * Patch by Scott McNutt, 02 Jan 2004: Add support for the Nios Active Serial Memory Interface (ASMI) on Cyclone devices * Patch by Andrea Marson, 16 Dec 2003: Add support for the PPChameleon ME and HI modules * Patch by Yuli Barcohen, 22 Dec 2003: Add support for Motorola DUET ADS board (MPC87x/88x)
* * Patch by Robert Schwebel, 15 Dec 2003:wdenk2004-01-03-16/+825
| | | | add support for cramfs (uses JFFS2 command interface)
* Patches by Stephan Linz, 11 Dec 2003:wdenk2004-01-03-124/+4198
| | | | | | | | | | | | | | - more documentation for NIOS port - new struct nios_pio_t, struct nios_spi_t - Reconfiguration for NIOS Development Kit DK1C20: o move board related code from board/dk1c20 to board/altera/dk1c20 o create a new common source path board/altera/common and move generic flash access stuff into it o change/expand configuration file DK1C20.h - Add support for NIOS Development Kit DK1S10 - Add status LED support for NIOS systems - Add dual 7-segment LED support for Altera NIOS DevKits
* * Patch by Ronen Shitrit, 10 Dec 2003:wdenk2004-01-03-201/+30086
| | | | | | | Add support for the Marvell DB64360 / DB64460 development boards * Patch by Detlev Zundel, 10 Dec 2003: fix dependency problem in examples/Makefile
* * Patch by Denis Peter, 8 Dec 2003wdenk2004-01-02-56/+2885
| | | | | | | | | | - add support for the PATI board (MPC555) - add SPI support for the MPC5xx * Patch by Anders Larsen, 08 Dec 2003: add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; cleanup some redundand #defines
* * Patch by André Schwarz, 8 Dec 2003:wdenk2004-01-02-81/+927
| | | | | | | | | | | | | | fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM): - TX and RX deskriptors must be quad-word aligned - does not work with only one TX deskriptor - standard reset method does not work * Patch by Masami Komiya, 08 Dec 2003: add RTL8139 ethernet driver * Patches by Ed Okerson, 07 Dec 2003: - fix ethernet for the AU1x00 processors in little-endian mode. - extend memsetup.S for the AU1x00 processors in BE and LE modes
* * Cleanup lowboot code for MPC5200wdenk2004-01-02-714/+1423
| | | | | | | | | | | | | | | | | | * Minor code cleanup (coding style) * Patch by Reinhard Meyer, 30 Dec 2003: - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, - added CONFIG_PHY_ADDR to include/configs/IceCube.h, - turned debug print of PHY registers into a function (called in two places) - added support for EMK MPC5200 based modules * Fix MPC8xx PLPRCR_MFD_SHIFT typo * Add support for TQM866M modules * Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) * Fix a few compiler warnings
* Patch by Reinhard Meyer, 28 Dec 2003:wdenk2003-12-28-0/+1199
| | | | Add initial support for TOP5200 board
* Cleanupwdenk2003-12-27-47/+42
|
* * Make CPU clock on ICA-IP board controllable by a "cpuclk"wdenk2003-12-27-65/+191
| | | | | | | | | | | | | | environment variable which can set to "100", "133", or "150". The CPU clock will be configured accordingly upon next reboot. Other values are ignored. In case of an invalid or undefined "cpuclk" value, the compile-time default CPU clock speed will be used. * Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory window that is used to access the UART registers by the Linux driver) * Patch by Reinhard Meyer, 20 Dec 2003: Fix clock calculation for the MPC5200 for higher clock frequencies (above 2**32 / 10 = 429.5 MHz).
* * Fix IceCube CLKIN configuration (it's 33.000000MHz)wdenk2003-12-20-8/+100
| | | | | | * Add new configuration for IceCube board with DDR memory * Update TRAB memory configurations
* Add JFFS2 support for INCA-IP boardwdenk2003-12-12-1/+38
|
* Minor reformattingwdenk2003-12-09-310/+299
|
* Patch by Bill Hargen, 09 Dec 2003.stroese2003-12-09-0/+9
|
* BUBINGA405EP added.stroese2003-12-09-0/+4
|
* Updated for PPC405EP boards.stroese2003-12-09-5/+79
|
* Fix output for "Unprotecting".stroese2003-12-09-1/+2
|
* Debug printf's removed.stroese2003-12-09-0/+6
|
* Updated for PPC405EP boards (2 banks only).stroese2003-12-09-0/+8
|
* BUBINGA405EP port fixed.stroese2003-12-09-36/+139
|
* * Patch by Bernhard Kuhn, 28 Nov 2003:wdenk2003-12-08-0/+3972
| | | | | add support for Coldfire CPU add support for Motorola M5272C3 and M5282EVB boards
* * Patch by Pierre Aubert, 24 Nov 2003:wdenk2003-12-07-22/+44
| | | | | | | - add a return value for the fpga command - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT is defined. If ide_preinit fails, ide_init is aborted. - fix an endianess problem in fat.h
* Patch by Wolter Kamphuis, 05 Dec 2003:wdenk2003-12-07-317/+4638
| | | | Add support for SNMC's QS850/QS823/QS860T boards
* * Patch by Yuli Barcohen, 3 Dec 2003:wdenk2003-12-07-297/+164
| | | | | | | | | | "revive" U-Boot support for old Motorola MPC860ADS board * Patch by Cam(ilo?), 03 Dec 2003: make examples build even with broken Montavista objcopy * Patch by Pavel Bartusek, 27 Nov 2003: fix conversion problem with "bootretry" evironment variable
* * Patch by Andre Schwarz, 24 Nov 2003:wdenk2003-12-07-8/+1393
| | | | | | | | | | add support for mvblue (mvBlueLYNX and mvBlueBOX) boards * Patch by Pavel Bartusek, 21 Nov 2003: set ZMII bridge speed on 440 * Patch by Anders Larsen, 17 Nov 2003: Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
* * Patches by David Müller, 14 Nov 2003:wdenk2003-12-07-153/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - board/mpl/common/common_util.c * implement support for BZIP2 compressed images * various cleanups (printf -> puts, ...) - board/mpl/common/flash.c * report correct errors to upper layers * check the erase fail and VPP low bits in status reg - board/mpl/vcma9/cmd_vcma9.c - board/mpl/vcma9/flash.c * various cleanups (printf -> puts, ...) - common/cmd_usb.c * fix typo in comment - cpu/arm920t/usb_ohci.c * support for S3C2410 is missing in #if line - drivers/cs8900.c * reinit some registers in case of error (cable missing, ...) - fs/fat/fat.c * support for USB/MMC devices is missing in #if line - include/configs/MIP405.h - include/configs/PIP405.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support - include/configs/VCMA9.h * enable BZIP2 support * enlarge malloc space to 1MiB because of BZIP2 support * enable USB support - lib_arm/armlinux.c * change calling convention of ARM Linux kernel as described on http://www.arm.linux.org.uk/developer/booting.php * Patch by Thomas Lange, 14 Nov 2003: Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to support all these AMD boards. * Patch by Thomas Lange, 14 Nov 2003: Workaround for mips au1x00 physical memory accesses (the au1x00 uses a 36 bit bus internally and cannot access physical memory directly. Use the uncached SDRAM address instead of the physical one.)
* * Patch by Xue Ligong (Joe), 13 Nov 2003:wdenk2003-12-07-37/+476
| | | | | | | | | | add Realtek 8019 ethernet driver * Patch by Yuli Barcohen, 13 Nov 2003: MPC826xADS/PQ2FADS cleanup * Patch by Anders Larsen, 12 Nov 2003: Update README to mark the PORTIO commands non-standard
* * Patch by Nicolas Lacressonnière, 12 Nov 2003:wdenk2003-12-06-271/+652
| | | | | | | | | | | | | | update for for Atmel AT91RM9200DK development kit: - support for environment variables in DataFlash - Atmel DataFlash AT45DB1282 support * Patch by Jeff Carr, 11 Nov 2003: add support for new version of 8270 processors * Patches by George G. Davis, 05 Nov 2003: - only pass the ARM linux initrd tag to the kernel when an initrd is actually present - update omap1510inn configuration file
* * Patches by Stephan Linz, 3 Nov 2003:wdenk2003-12-06-18/+43
| | | | | | | | | | | | - more endianess fixes for LAN91C111 driver - CFG_HZ configuration patch for NIOS Cyclone board * Patch by Stephan Linz, 28 Oct 2003: fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c * Patch by Steven Scholz, 20 Oct 2003: - make "mii info <addr>" show infor for PHY at "addr" only - Endian fix for miiphy_info()
* * Patch by Gleb Natapov, 19 Sep 2003:wdenk2003-12-06-1055/+569
| | | | | | | | Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c * Patch by Anders Larsen, 17 Sep 2003: Bring ARM memory layout in sync with the documentation: stack and malloc-heap are now located _below_ the U-Boot code
* Accelerate booting on TRAB board: read and check autoupdate imagewdenk2003-12-06-16/+50
| | | | headers first instead of always reading the whole images.
* Fix typo in MPC5XXX code (pointed out by Victor Wren)wdenk2003-12-05-2/+4
|
* * Enabled password check on RMU boardwdenk2003-12-03-1/+12
| | | | | * Fix configuration problem with IceCube in LOWBOOT configuration: environment got embedded, corrupting the image layout.
* Add support for BMS2003 boardwdenk2003-11-25-15/+45
| | | | | (featuring a NEC NL6448BC33-54. 10.4", 640x480 TFT display). Fix NEC display names (it's 6440 [for 640x480], not 6640).
* Fix flash driver for TRAB board (must use Unlock Bypass Reset commandwdenk2003-11-17-22/+38
| | | | to exit Unlock Bypass Mode); adjust timings for flash, SRAM and CPLD
* * Use "-fPIC" instead of "-mrelocatable" to prevent problems withwdenk2003-11-17-21/+57
| | | | | | | | | | | | | recent tools * Add checksum verification to 'imls' command * Add bd_info fields needed for 4xx Linux I2C driver * Patch by Martin Krause, 4 Nov. 2003: Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap) * Print used network interface when CONFIG_NET_MULTI is set
generated by cgit v1.1 at 2024-11-17 04:03:08 +0000